madalinignisca

Kubernetes 1.25 on Fedora 37 @ Hetzner the right way

Using only kubeadm and helm from Fedora's repository Instructions are for Fedora 37+ only, using distribution's repository for installing Kubernetes.

Note: avoid kubernetes and kubernetes-master as there are deprecated and setup is more complex.

Note: I have not yet tinkered using ipv6, but it is in my plans to do it.

The result should be a decent Kubernetes cluster, with Cloud Control Manager installed and controlling layer 2 private networking allowing pods to talk at fastest speed possible. Will default to Hetzner's cloud volumes.

madalinignisca

Original

Scaling up the control plane nodes is a bit more complicated. That's because the worker nodes can be easily replaced and/or powered off, but that's not the case for the control plane nodes.

In this case, you can't rely on Terraform to scale up the control plane nodes for you, because Terraform would power off all control plane nodes at the same time, which could make etcd lose the quorum (in that case your cluster would be corrupt/lost).

I haven't tested it, but I think you might have success if you do something like this:

Drain one of the control plane nodes (kubectl drain ) SSH to that node and power it off (sudo poweroff)

madalinignisca

1. setup a network 10.0.0.0/8 with defaults (like hetzner panel does).
2. setup a few servers (I start with 1 control-plane and 2 nodes), attaching them to the network (I did setup a snapshot image with common OS setup before, so next steps I usually skip)
3. setup containerd (I do the manual setup, and all all container network plugins and rest of deps)
4. setup kubeadm, kubelet, kubectl on latest or a maintained version as per kubernetes.io docs (I do again the manual setup)
5. Edit on all servers /etc/hosts and add all nodes -- make sure to match the name in hetzner!!! (not necessary if you are going to do a dns server accessible in your private network)
6. I'm adding a load balancer ip identical with first control-plane to be able to run the init, so later I can add the real load balancer and point to the new ip. Add it to hosts in all nodes.
7. Example of init the cluster: kubeadm init --control-plane-endpoint=cplb.dev.saasified.dev --upload-certs --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-ad

madalinignisca

# hel1, CX51, Ubuntu 20.04, 10 GB EXT4 Volume, 240 GB EXT4 Volume



# local NVME


root@ubuntu-32gb-hel1-1:~# hdparm -Tt /dev/sda

/dev/sda:

madalinignisca

<?xml version="1.0"?>
<ruleset name="Sane Laravel ruleset"
         xmlns="http://pmd.sf.net/ruleset/1.0.0"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://pmd.sf.net/ruleset/1.0.0
                     http://pmd.sf.net/ruleset_xml_schema.xsd"
         xsi:noNamespaceSchemaLocation="
                     http://pmd.sf.net/ruleset_xml_schema.xsd">
    <description>
        This enables everything and sets some exceptions

madalinignisca

#cloud-config

groups:
  - docker

users:
  - default
  - name: ubuntu
    groups:
      - docker

madalinignisca

Migrating your pritunl install between servers

This is a small write up about how to migrate your pritunl install between servers. It's not especially detailed because I'm lazy and your migration story will most likely be different. All this can be avoided by using a remote/hosted mongo instance(compose.io, mongolab, etc.) and simply pointing your pritunl instance at that. If you want more details ask, and I'll do my best to answer and update this write-up accordingly. Also, feel free to criticize my grammar and spelling.

madalinignisca

Vue.js Workflow - Creating custom components, form fields and blocks in Twill

Objectives:

• Get an overview of Twill's Artisan commands for development — Part 1
• Create a custom Vue.js component — Part 2
• Create a custom Twill form field — Part 3
• Create a custom Twill block — Part 4

madalinignisca

PHP on windows

Edit: running native php on windows sucks!

1. It is extremly low performant (PHP is designed for UNIX systems and depends on UNIX native libraries)
2. What works for you on Windows, chances that critical things will break in Linux servers
3. Windows now has WSL2 and it is awesome!
4. Docker also :-)

Instalation

Beginners, use latest stable version, for example 8.0.10 at the writing of this gist.

madalinignisca

WITH inactive_connections AS (
    SELECT
        pid,
        rank() over (partition by client_addr order by backend_start ASC) as rank
    FROM 
        pg_stat_activity
    WHERE
        -- Exclude the thread owned connection (ie no auto-kill)
        pid <> pg_backend_pid( )
    AND