Steps for configuring Caddy reverse proxy for Hassio
Add this repo to the addon store:
https://github.com/korylprince/hassio-caddy
Using the icon in the upper right, reload the page.
## Node configuration ## | |
esphome: | |
name: smart_scale | |
platform: ESP8266 | |
board: nodemcuv2 | |
globals: | |
- id: initial_zero | |
type: float |
Steps for configuring Caddy reverse proxy for Hassio
Add this repo to the addon store:
https://github.com/korylprince/hassio-caddy
Using the icon in the upper right, reload the page.
Do you want to try out this experimental (!) new lovelace UI stuff in Home Assistant but don't want to migrate your entire configuration? This script is here to help! It reads in your Home Assistant configuration (specifically the group:
section) and creates a matching ui-lovelace.yaml
file in your Home Assistant configuration folder (of course backing up any previous file at that path).
To use this script, you first need to have python and home assistant installed where you plan to run this script. Do so using virtual environments and the pip3 install -U homeassistant
command. Then copy below file to lovelace_migrate.py
(any location should work) and run:
python3 lovelace_migrate.py -c <PATH_TO_HASS_CONFIG_DIR>
// Get ESP8266 going with Arduino IDE | |
// - https://github.com/esp8266/Arduino#installing-with-boards-manager | |
// Required libraries (sketch -> include library -> manage libraries) | |
// - PubSubClient by Nick ‘O Leary | |
// - DHT sensor library by Adafruit | |
#include <ESP8266WiFi.h> | |
#include <PubSubClient.h> | |
#include <DHT.h> |
# Defaults / Configuration options for homebridge | |
# The following settings tells homebridge where to find the config.json file and where to persist the data (i.e. pairing and others) | |
HOMEBRIDGE_OPTS=-U /var/lib/homebridge | |
# If you uncomment the following line, homebridge will log more | |
# You can display this via systemd's journalctl: journalctl -f -u homebridge | |
# DEBUG=* |
#!/usr/bin/python | |
######### | |
# About # | |
######### | |
# This script uses a Raspberry Pi to sense for the presense or absense of water. | |
# If there is water, an email is sent and a buzzer goes off. | |
# When it's dry again, another email is sent, and the buzzer turns off. |