minamiss

#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
  #include <avr/power.h>
#endif

#define PIN 6
//fist arg is # or pixels
Adafruit_NeoPixel strip = Adafruit_NeoPixel(5, PIN, NEO_GRB + NEO_KHZ800);

//declare pins of LEDs

minamiss

#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
  #include <avr/power.h>
#endif

#define PIN 6
//fist arg is # or pixels
Adafruit_NeoPixel strip = Adafruit_NeoPixel(5, PIN, NEO_GRB + NEO_KHZ800);

//declare pins of LEDs

minamiss

#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
  #include <avr/power.h>
#endif

#define PIN 6
//fist arg is # or pixels
Adafruit_NeoPixel strip = Adafruit_NeoPixel(5, PIN, NEO_GRB + NEO_KHZ800);

//declare pins of LEDs

minamiss

int potent=0;//stroes value
int touch=0;
int potPin=A0;
int touchPin=A1;
int breaks=5;
int bright=0;
int yellow=3;
int bri=0;

minamiss

nt speak=8;
int light=A0;
int level=0;
float freq;

void setup() {
 Serial.begin(9600); //serial communication
  pinMode(speak,OUTPUT);
  pinMode(light,INPUT);

minamiss

int speak=8;
int touch=A0;
int level=0;
int light=A1;
int bright=0;
int yellow=5;
int lightup=0;
float freq;

void setup() {

minamiss

int knob=0;
int flex=0;
int income=0;
void setup() {
  Serial.begin(9600); 
  pinMode(9, OUTPUT);
  pinMode(A0,INPUT);
  pinMode(A2,INPUT); 
}

minamiss

include <Servo.h>

Servo spin;

void setup() {
attach the servo motor
spin.attach(9);
  Serial.begin(9600);

}

minamiss

#include <Servo.h>


const int switchPin = 2;    // switch input
const int motor1Pin = 3;    // H-bridge leg 1 (pin 2, 1A)
const int motor2Pin = 4;    // H-bridge leg 2 (pin 7, 2A)
const int enablePin = 9;    // H-bridge enable pin

void setup() {

minamiss

int stp =2;
int dir=3;
int witch=8;
int state;  

void setup() {