edwork

CEC-Detection

Want to control a TV over HDMI-CEC via a remote RasPi? Include the following as a switch:

platform: command_line
switches:
    tv_power:
      command_on: "ssh pi@<ip_address> -i /home/homeassistant/.homeassistant/id_homeassistant 'echo on 0 | cec-client -s -d 1'"
 command_off: "ssh pi@ -i /home/homeassistant/.homeassistant/id_homeassistant 'echo standby 0 | cec-client -s -d 1'"

Saka7

# Download http://download.friendlyarm.com/nanopiduo2
# Unzip
# Flash image to sd-card
lsblk -p
mkfs.vfat /dev/sd*
dd if=./*.img of=/dev/sd* bs=4M conv=notrunc status=progress

# Configure wpa_supplicant
sudo vi ./etc/wpa_supplicant/wpa_supplicant.conf