Nic Jansma nicjansma

## MountVHD.cmd
@echo off
setlocal enabledelayedexpansion

if {%1}=={} (
    echo Usage: %~nx0 [vhd] [letter]
    exit /b 1
)
set vhdPath=%~dpnx1
set driveLetter=%2

## check-apache-access-log-spammers.sh
#!/bin/bash

#
# Config
#

# if more than the threshold, the IP will be banned
THRESHOLD=100

# search this many recent lines of the access log

## PngOutBatch.cmd
@echo off
setlocal enabledelayedexpansion

REM
REM PngOutBatch
REM
REM Nic Jansma - nic@nicj.net
REM
REM Runs a PNG through PngOut multiple times at different block sizes.  Shows the
REM file-size savings during and at the end.

## ie8-date-now-support.js
if (!Date.now) {
    Date.now = function() {
        return new Date().valueOf();
    }
}

## ie89-console-apply-support.js
if (Function.prototype.bind && typeof console == "object" && typeof console.log == "object") {
    var logFns = ["log", "info", "warn", "error", "assert", "dir", "clear", "profile", "profileEnd"];

    $.each(logFns, function (i, method) {
        console[method] = Function.prototype.call.bind(console[method], console);
    });
}

## Keybase.md

      
              1 file
            
          
              0 forks
            
          
                0 comments
              
            
              0 stars
            
          
                nicjansma
                / Keybase.md
            
            
              Last active
              November 20, 2017 01:45
            
              
                Keybase Proof
              
          
    Keybase proof

I hereby claim:

I am nicjansma on github.
I am nicj (https://keybase.io/nicj) on keybase.
I have a public key ASDmvrFSwHxuJExmJfUoAyj8hLpx7-hKaa83bHOg-hu5oAo

To claim this, I am signing this object:

  
## boomerang-xhr-whitelist.js
/**
 * Boomerang XHR whitelist
 */
function addWhitelistFilter() {
    if (window.BOOMR &&
        window.BOOMR.version &&
        window.BOOMR.plugins &&
        window.BOOMR.plugins.AutoXHR &&
        typeof BOOMR.plugins.AutoXHR.addExcludeFilter === "function") {

## boomerang-waitformark-plugin.js
/**
 * The `WaitForMark` Boomerang plugin waits for the specified UserTiming Mark
 * (or Measure) to exist on the page before a beacon is sent.
 *
 * It does not affect the Page Load time (`t_done`) -- it just delays a beacon
 * until the Mark exists.  This allows the beacon to contain additional
 * ResourceTiming data and other metrics/timers that might happen after page load.
 *
 * NOTE: Any plugin like this that delays a beacon from being sent after onload
 * will have an effect on total number of beacons captured (due to the visitor

## boomerang-waitforjsvar-plugin.js
/**
 * The `WaitForJsVar` Boomerang plugin waits for the specified JavaScript variable
 * to exist on the page before a beacon is sent.
 *
 * It does not affect the Page Load time (`t_done`) -- it just delays a beacon
 * until the variable exists.  This allows the beacon to contain additional
 * ResourceTiming data and other metrics/timers that might happen after page load.
 *
 * NOTE: Any plugin like this that delays a beacon from being sent after onload
 * will have an effect on total number of beacons captured (due to the visitor

## boomerang-duplicate-custom-timers-to-beacon.js
/**
 * The `DuplicateTimersToBeacon` Boomerang plugin duplicates any mPulse Custom Timers
 * that are logged in the beacon's `t_other` parameter into distinct beacon parameters.
 *
 * e.g:
 *
 *     t_other=boomerang|17,boomr_fb|2516,boomr_ld|2351,boomr_lat|165,custom5|2112,custom0|27
 *
 * Will add two more beacon parameters:
 *
	@echo off
	setlocal enabledelayedexpansion

	if {%1}=={} (
	echo Usage: %~nx0 [vhd] [letter]
	exit /b 1
	)
	set vhdPath=%~dpnx1
	set driveLetter=%2
	#!/bin/bash

	#
	# Config
	#

	# if more than the threshold, the IP will be banned
	THRESHOLD=100

	# search this many recent lines of the access log
	@echo off
	setlocal enabledelayedexpansion

	REM
	REM PngOutBatch
	REM
	REM Nic Jansma - nic@nicj.net
	REM
	REM Runs a PNG through PngOut multiple times at different block sizes. Shows the
	REM file-size savings during and at the end.
	if (!Date.now) {
	Date.now = function() {
	return new Date().valueOf();
	}
	}
	if (Function.prototype.bind && typeof console == "object" && typeof console.log == "object") {
	var logFns = ["log", "info", "warn", "error", "assert", "dir", "clear", "profile", "profileEnd"];

	$.each(logFns, function (i, method) {
	console[method] = Function.prototype.call.bind(console[method], console);
	});
	}
	/**
	* Boomerang XHR whitelist
	*/
	function addWhitelistFilter() {
	if (window.BOOMR &&
	window.BOOMR.version &&
	window.BOOMR.plugins &&
	window.BOOMR.plugins.AutoXHR &&
	typeof BOOMR.plugins.AutoXHR.addExcludeFilter === "function") {
	/**
	* The `WaitForMark` Boomerang plugin waits for the specified UserTiming Mark
	* (or Measure) to exist on the page before a beacon is sent.
	*
	* It does not affect the Page Load time (`t_done`) -- it just delays a beacon
	* until the Mark exists. This allows the beacon to contain additional
	* ResourceTiming data and other metrics/timers that might happen after page load.
	*
	* NOTE: Any plugin like this that delays a beacon from being sent after onload
	* will have an effect on total number of beacons captured (due to the visitor
	/**
	* The `WaitForJsVar` Boomerang plugin waits for the specified JavaScript variable
	* to exist on the page before a beacon is sent.
	*
	* It does not affect the Page Load time (`t_done`) -- it just delays a beacon
	* until the variable exists. This allows the beacon to contain additional
	* ResourceTiming data and other metrics/timers that might happen after page load.
	*
	* NOTE: Any plugin like this that delays a beacon from being sent after onload
	* will have an effect on total number of beacons captured (due to the visitor
	/**
	* The `DuplicateTimersToBeacon` Boomerang plugin duplicates any mPulse Custom Timers
	* that are logged in the beacon's `t_other` parameter into distinct beacon parameters.
	*
	* e.g:
	*
	* t_other=boomerang\|17,boomr_fb\|2516,boomr_ld\|2351,boomr_lat\|165,custom5\|2112,custom0\|27
	*
	* Will add two more beacon parameters:
	*