nom3ad

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

nom3ad

How to Run VBScripts in Wine

It's very easy but not straight-forward or documented anywhere.

First, install Wine 1.6.2. This version probably isn't required, but it's the version that currently ships with Debian Jessie and it works with VBScript.

Install Winetricks and use it to add the following libraries:

• wsh57

nom3ad

import threading
def spawnthread(f):
    def func(*args,**kwargs):
            thr = threading.Thread(target=f, args=args, kwargs=kwargs)
            thr.start()
    return func
# --------------------------    
    
import time

nom3ad

# taken from http://www.piware.de/2011/01/creating-an-https-server-in-python/
# generate server.xml with the following command:
#    openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
# run as follows:
#    python simple-https-server.py
# then in your browser, visit:
#    https://localhost:4443

import BaseHTTPServer, SimpleHTTPServer
import ssl

nom3ad

import java.io.IOException;

import javax.servlet.ServletException;
import javax.servlet.http.*;

import org.mortbay.jetty.Server;
import org.mortbay.jetty.servlet.ServletHolder;

public class jettyServletEmbedding {

nom3ad

import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PushbackInputStream;
import java.util.zip.GZIPInputStream;

import javax.servlet.ServletException;
import javax.servlet.http.*;
import org.mortbay.jetty.Server;
import org.mortbay.jetty.servlet.ServletHolder;

nom3ad

nom3ad

#!/usr/bin/env python
#
# udp_hole_punch_tester.py - UDP Hole Punching test tool
#
# Usage: udp_hole_punch_tester.py remote_host remote_port
#
# Run this script simultaneously on 2 hosts to test if they can punch
# a UDP hole to each other.
#
# * remote_port should be identical on 2 hosts.

nom3ad

HTTP transfer protocols
=======================

Git supports two HTTP based transfer protocols.  A "dumb" protocol
which requires only a standard HTTP server on the server end of the
connection, and a "smart" protocol which requires a Git aware CGI
(or server module).  This document describes both protocols.

As a design feature smart clients can automatically upgrade "dumb"
protocol URLs to smart URLs.  This permits all users to have the

nom3ad

#!/usr/bin/env python

"""Simple HTTP Server With Upload.

This module builds on BaseHTTPServer by implementing the standard GET
and HEAD requests in a fairly straightforward manner.

"""