tlrobinson

WiFi AP+STA:

• painlessMesh: https://gitlab.com/painlessMesh/painlessMesh
• easyMesh: https://github.com/Coopdis/easyMesh
• ESP-Mesh: https://www.espressif.com/en/products/software/esp-mesh/overview
• ESP8266 WiFi Mesh: https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266WiFiMesh

ESP-Now:

• ESP-Now BATMAN: http://games.workshy.co.uk/search/label/ESP-Now https://www.youtube.com/watch?v=vp-HlMjX07k

crittermike

# One liner
wget --recursive --page-requisites --adjust-extension --span-hosts --convert-links --restrict-file-names=windows --domains yoursite.com --no-parent yoursite.com

# Explained
wget \
     --recursive \ # Download the whole site.
     --page-requisites \ # Get all assets/elements (CSS/JS/images).
     --adjust-extension \ # Save files with .html on the end.
     --span-hosts \ # Include necessary assets from offsite as well.
     --convert-links \ # Update links to still work in the static version.

cmer

listen l1
    bind 0.0.0.0:443
    mode tcp
    timeout connect  4000
    timeout client   180000
    timeout server   180000
    server srv1 host.example.com:9443

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

bantic

  class RouteRecognizer
    attr_reader :paths
    
    # To use this inside your app, call:
    # `RouteRecognizer.new.initial_path_segments`
    # This returns an array, e.g.: ['assets','blog','team','faq','users']

    INITIAL_SEGMENT_REGEX = %r{^\/([^\/\(:]+)}

    def initialize

aliasbind

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard