Ruipeng Zhang ppoffice

## 0-compile-r8152-qnap.md

      
              4 files
            
          
              2 forks
            
          
                128 comments
              
            
              23 stars
            
          
                RikshaDriver
                / 0-compile-r8152-qnap.md
            
            
              Last active
              August 22, 2025 04:29
            
              
                Compiling Realtek 8152, 8156 and 8157 ( RTL8152 ) drivers for QNAP NAS
              
          
    Compiling Realtek RTL 8152, 8156 and 8157 drivers for QNAP NAS

Note
This guide was last updated on 17th Feb 2025

Many QNAP NAS devices only come with 1Gbe network interfaces. These devices can easily benefit from a simple network upgrade by connecting the ubiquitious 2.5Gbe USB NICs from Realtek. Unfortunately, some of the older QNAP NAS systems do not support the newer r8156 based 2.5Gbe NICs or r8157 based 5Gbe NICs as they run an older 4.x linux kernel and the r8152 source files included with the older linux kernel are based off an older codebase that predates the 8156/8157 series.
With some elbow grease however, we can build support for the 2.5 & 5 Gbe adapters and easily upgrade functionality.

  
## docker.md

      
              1 file
            
          
              173 forks
            
          
                271 comments
              
            
              1484 stars
            
          
                FreddieOliveira
                / docker.md
            
            
              Last active
              August 31, 2025 01:37
            
              
                This tutorial shows how to run docker natively on Android, without VMs and chroot.
              
          
    Docker on Android 🐋📱

Edit 🎉

All packages, except for Tini have been added to termux-root. To install them, simply pkg install root-repo && pkg install docker. This will install the whole docker suite, left only Tini to be compiled manually.

Summary


## WSL2GUIXvnc-en.md

      
              1 file
            
          
              49 forks
            
          
                334 comments
              
            
              327 stars
            
          
                tdcosta100
                / WSL2GUIXvnc-en.md
            
            
              Last active
              August 16, 2025 01:50
            
              
                A tutorial to use GUI in WSL2 replacing original XServer by Xvnc, allowing WSL to work like native Linux, including login screen
              
          
    WSL2 with GUI using Xvnc

Note
If you want to use pure WSLg, you can try the new WSLg (XWayland) tutorial or the WSLg (Wayland) tutorial.

In this tutorial, we will setup GUI in WSL2, and access it using VNC. No additional software outside WSL (like VcXsrv) is required, except, of course, a VNC Viewer (RealVNC, TightVNC, TigerVNC, UVNC, etc, all of them might work flawlessly).
The key component we need to install is the desktop metapackage you want (GNOME, KDE, Xfce, Budgie, etc) and tigervnc-standalone-server.
For this setup, I will use Ubuntu (20.04, 22.04 and 24.04 are working), and install GNOME Desktop. Since the key components aren't bound to Ubuntu or GNOME, you can use your favorite distro and GUI. Check the [Sample

  
## change-codec.md

      
              1 file
            
          
              31 forks
            
          
                225 comments
              
            
              400 stars
            
          
                dvf
                / change-codec.md
            
            
              Last active
              August 30, 2025 15:46
            
              
                Enable High Quality mode on your headphones (Updated for macOS Catalina)
              
          
    If you're using a high-end bluetooth headset on your Macbook Pro it's likely your mac is using an audio codec which favors battery efficiency over high quality. This results in a drastic degradation of sound, the SBC codec is the likely culprit, read more about it here.
Find out what codec you're using


Play a song on your headphones
Option (⌥) click the Bluetooth button at the top of your screen

If you're using AAC or aptX, you can stop here—those are the highest quality codecs.

Change your codec to AAC or aptX


## android-backup-apk-and-datas.md

      
              1 file
            
          
              173 forks
            
          
                83 comments
              
            
              875 stars
            
          
                AnatomicJC
                / android-backup-apk-and-datas.md
            
            
              Last active
              August 29, 2025 07:52
            
              
                Backup android app, data included, no root needed, with adb
              
          
    Backup android app, data included, no root needed, with adb


Note: This gist may be outdated, thanks to all contributors in comments.

adb is the Android CLI tool with which you can interact with your android device, from your PC
You must enable developer mode (tap 7 times on the build version in parameters) and install adb on your PC.
Don't hesitate to read comments, there is useful tips, thanks guys for this !

  
## raspberry-pi-cec-client.md

      
              1 file
            
          
              6 forks
            
          
                6 comments
              
            
              55 stars
            
          
                rmtsrc
                / raspberry-pi-cec-client.md
            
            
              Created
              May 13, 2019 09:49
            
              
                Using cec-client on a Raspberry Pi to control TV power and inputs via HDMI
              
          
    Using cec-client on a Raspberry Pi

Most modern HDMI connected devices support Consumer Electronics Control (CEC). It allows devices to send commands to each other, typically to get the TV to switch input and control volume. If you have ever turned on a Game Console and had your TV automatically change input to that device you have seen CEC in action. It is very convenient and useful, sort of a universal remote that works.
Every manufacturer seems to have it’s own branding of CEC (e.g. Samsung Anynet+, LG SimpLink, Sharp Aquos Link) but it may need to be enabled. Check your manual for details.
Using a Raspberry Pi connected to a TV that supports CEC, you can use the command line cec-client application to control the inputs and the TV itself. These are notes on how to use cec-client and understand the different options.
Details


## lwp-cloudflare-dyndns.sh
#!/bin/bash
# Cloudflare as Dynamic DNS
# From: https://letswp.io/cloudflare-as-dynamic-dns-raspberry-pi/
# Based on: https://gist.github.com/benkulbertis/fff10759c2391b6618dd/
# Original non-RPi article: https://phillymesh.net/2016/02/23/setting-up-dynamic-dns-for-your-registered-domain-through-cloudflare/

# Update these with real values
auth_email="email@example.com"
auth_key="global_api_key_goes_here"
zone_name="example.com"

## ffmpeg-hls.html
<!DOCTYPE html>
<html lang='`en'>
<head>
    <meta charset='utf-8'/>
    <title>Audio only stream example</title>
    <script src="//cdn.jsdelivr.net/npm/hls.js@latest"></script>
    <style>
        video {
            width: 640px;
            height: 360px;

## README.md

      
              1 file
            
          
              38 forks
            
          
                161 comments
              
            
              350 stars
            
          
                paolocarrasco
                / README.md
            
            
              Last active
              July 11, 2025 09:57
            
              
                How to understand the `gpg failed to sign the data` problem in git
              
          
    Problem

You have installed GPG, then tried to commit and suddenly you see this error message after it:
error: gpg failed to sign the data
fatal: failed to write commit object

Debug

  
## arpspoof.py
# Copyright 2017 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
	#!/bin/bash
	# Cloudflare as Dynamic DNS
	# From: https://letswp.io/cloudflare-as-dynamic-dns-raspberry-pi/
	# Based on: https://gist.github.com/benkulbertis/fff10759c2391b6618dd/
	# Original non-RPi article: https://phillymesh.net/2016/02/23/setting-up-dynamic-dns-for-your-registered-domain-through-cloudflare/

	# Update these with real values
	auth_email="email@example.com"
	auth_key="global_api_key_goes_here"
	zone_name="example.com"
	<!DOCTYPE html>
	<html lang='`en'>
	<head>
	<meta charset='utf-8'/>
	<title>Audio only stream example</title>
	<script src="//cdn.jsdelivr.net/npm/hls.js@latest"></script>
	<style>
	video {
	width: 640px;
	height: 360px;
	# Copyright 2017 Google Inc.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# https://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,