prasertsakd

/*

 Udp NTP Client

 Get the time from a Network Time Protocol (NTP) time server
 Demonstrates use of UDP sendPacket and ReceivePacket
 For more on NTP time servers and the messages needed to communicate with them,
 see http://en.wikipedia.org/wiki/Network_Time_Protocol

 created 4 Sep 2010

prasertsakd

/*
 *  This sketch shows the WiFi event usage
 *
 *  In this example you can receive and process below events.
 *  Refer to ESP8266WiFiType.h
 *  
 typedef enum {
    WIFI_EVENT_STAMODE_CONNECTED = 0,
    WIFI_EVENT_STAMODE_DISCONNECTED,
    WIFI_EVENT_STAMODE_AUTHMODE_CHANGE,

prasertsakd

#include <ESP8266WiFi.h>
#include <WiFiUDP.h>

WiFiUDP UDP;


const char* ssid = "sensorNode";
const char* password = "1234567890";
boolean wifiConnected = false;

prasertsakd

//midi test

void setup() {

   // Initialise Serial connection
    Serial.begin(115200);
    
    //midi
    //nodemcu use pin D4 for TX
    Serial1.begin(31250);

prasertsakd

#include <ESP8266WiFi.h>
#include <WiFiUdp.h>
#include <Adafruit_NeoPixel.h>

WiFiUDP Udp;
Adafruit_NeoPixel strip = Adafruit_NeoPixel(5, 5, NEO_GRB + NEO_KHZ800);

const char* ssid = "...............";
const char* password = "........................";

prasertsakd

/**
 * ControlP5 Button
 * this example shows how to create buttons with controlP5.
 * 
 * find a list of public methods available for the Button Controller 
 * at the bottom of this sketch's source code
 *
 * by Andreas Schlegel, 2012
 * www.sojamo.de/libraries/controlp5
 *

prasertsakd

byte seven_seg_digits[11][7] = { { 1,1,1,1,1,1,0 },  // = 0
                                 { 0,1,1,0,0,0,0 },  // = 1
                                 { 1,1,0,1,1,0,1 },  // = 2
                                 { 1,1,1,1,0,0,1 },  // = 3
                                 { 0,1,1,0,0,1,1 },  // = 4
                                 { 1,0,1,1,0,1,1 },  // = 5
                                 { 1,0,1,1,1,1,1 },  // = 6
                                 { 1,1,1,0,0,0,0 },  // = 7
                                 { 1,1,1,1,1,1,1 },  // = 8
                                 { 1,1,1,1,0,1,1 },   // = 9

prasertsakd

int ledPin;
int timeDelay;
int ledup = {6,7,8,9,10,11,12,13,12,11,10,9,8,7,6};

void setup() {
  for (ledPin = 0;ledPin<=8;ledPin++) { 
    pinMode( ledup[ledPin], OUTPUT);
  } 
}

prasertsakd

int ledPin = 13;
boolean btn_up,btn_down;

void setup() {
  // put your setup code here, to run once:
  pinMode(2, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);

  for (int pin=6; pin<=13;pin++) {
    pinMode(pin, OUTPUT);

prasertsakd

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
 
const char* ssid = "...............";
const char* password = "...............";


ESP8266WebServer server(80);