r-vignesh

U-Boot SPL 2021.01-00004-g49d2aa0f758a (Nov 21 2022 - 15:26:00 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.5.1-v08.05.01 (Chill Capybara')
SPL initial stack usage: 13424 bytes
Trying to boot from MMC2
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Authentication passed
Authentication passed
Loading Environment from MMC... *** Warning - No MMC card found, using default environment

r-vignesh

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index c9cc52e28abc..bb98711bc491 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -957,7 +957,8 @@ &cpsw_port1 {
 };
 
 &cpsw_port2 {
-	status = "disabled";
+	phy-mode = "rgmii-rxid";

r-vignesh

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.0.0-rc3-next-20220831-00007-g82f7afd2f38e (a0132425@uda0132425) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.
29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #169 SMP PREEMPT Thu Sep 1 11:13:10 IST 2022
[    0.000000] Machine model: Texas Instruments AM62A7 SK
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] printk: bootconsole [ns16550a0] enabled
[    0.000000] efi: UEFI not found.

r-vignesh

U-Boot SPL 2021.01-00522-g060f008b9fb5 (Aug 23 2022 - 14:56:27 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.3--w2022.02-am62a (Jolly Je')
am62a_init: board_init_f done
am62a_init: spl_boot_device: devstat = 0x243 bootmedia = 0x8 bootindex = 0
Trying to boot from MMC2
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices
Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) d

r-vignesh

U-Boot 2022.04-00482-ge6a3b8951b (Apr 15 2022 - 14:26:13 +0530)

SoC:   AM62X SR1.0
Model: Texas Instruments AM625 SK
EEPROM not available at 0x50, trying to read at 0x51
Board: AM62-SKEVM rev E2
DRAM:  2 GiB
Core:  41 devices, 17 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

r-vignesh

U-Boot 2022.04-00482-ge6a3b8951b (Apr 15 2022 - 14:26:13 +0530)

SoC:   AM62X SR1.0
Model: Texas Instruments AM625 SK
EEPROM not available at 0x50, trying to read at 0x51
Board: AM62-SKEVM rev E2
DRAM:  2 GiB
Core:  41 devices, 17 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2

r-vignesh

root@am65xx-evm:~# ethtool -s eth3 speed 100 duplex full              
[  282.558022] icssg-prueth icssg2-eth eth3: Link is Down
root@am65xx-evm:~# [  286.782890] icssg-prueth icssg2-eth eth3: Link i
s Up - 100Mbps/Full - flow control off

root@am65xx-evm:~# 
root@am65xx-evm:~# cat setup.sh 
ifconfig eth3 down
ethtool -L eth3 tx 4
ifconfig eth3 up