ramast

#!/usr/bin/env python3
# Based on code from these stackoverflow answers:
# https://askubuntu.com/questions/60837/record-a-programs-output-with-pulseaudio/910879#910879
import re
import subprocess
import sys
import os
import signal
from time import sleep

ramast

How to unbrick an Amazon Kindle Paperwhite™

This guide instructs you in how to unbrick an Amazon Kindle Paperwhite. The consequences of following it are your own responsibility. This method (opening the Kindle and using the serial interface) should be a last resort and should only be considered if other methods fail

The Guide

0. Pry open Kindle using a prying tool
1. Unscrew the screen and remove it from the base. Note that there's a screw hidden under the adhesive at the top in the middle
2. Solder tin wire to serial ports on the bottom
3. Attach tin wire to USB TTY device (order is ground, RX, TX, from the kindle's perspective, where GND is the smallest pad) and plug USB TTY device into your computer
4. Open Putty on your computer in serial mode, with the serial port specified as your USB device and baud configured to 115200

ramast

#!/bin/bash
# Credit: This code is based on answers provided by Waschtl and KrisWebDev
# https://askubuntu.com/questions/60837/record-a-programs-output-with-pulseaudio
# NOTE: An improved script written in python can be found here https://gist.github.com/ramast/c47bd5e57586e9c2deb74975e27089f0

cleanup(){
    if [ -z "$module_id" ]
    then
        exit 3
    fi

ramast

# -*- coding: utf-8 -*-
import json
import urllib2
import re
from base64 import b64decode
from M2Crypto import X509
from M2Crypto.Err import M2CryptoError

SNS_MESSAGE_TYPE_SUB_NOTIFICATION = "SubscriptionConfirmation"
SNS_MESSAGE_TYPE_NOTIFICATION = "Notification"