rdmarsh

Remove unused packages on Raspberry Pi

(this is worth looking at http://www.stefan-seelmann.de/wiki/rasperrypi-homeserver, which is basically this:

apt-get purge --auto-remove scratch debian-reference-en dillo idle3 python3-tk idle python-pygame python-tk lightdm gnome-themes-standard gnome-icon-theme raspberrypi-artwork gvfs-backends gvfs-fuse desktop-base lxpolkit netsurf-gtk zenity xdg-utils mupdf gtk2-engines alsa-utils  lxde lxtask menu-xdg gksu midori xserver-xorg xinit xserver-xorg-video-fbdev libraspberrypi-dev libraspberrypi-doc dbus-x11 libx11-6 libx11-data libx11-xcb1 x11-common x11-utils lxde-icon-theme gconf-service gconf2-common

)

Warning: this will probably break something. If you need sound, don't remove the "alsa" packages

sudo apt-get --yes purge xserver-common x11-xfs-utils x11-xserver-utils xinit libsmbclient blt gvfs gvfs-backends gvfs-daemons gvfs-fuse idle idle-python2.7 idle-python3.2 idle3 libaudio2 libice6 liblightdm-gobject-1-0 libobrender27 libpulse0 libqt4-svg libqt

killercup

/*
 * I add this to html files generated with pandoc.
 */

html {
  font-size: 100%;
  overflow-y: scroll;
  -webkit-text-size-adjust: 100%;
  -ms-text-size-adjust: 100%;
}

cobyism

Creating a bootable macOS USB installer

• First, plug in an 8GB (or bigger) USB drive, and use Disk Utility to erase it
• If you use the default settings, you should wind up with a blank drive at /Volumes/Untitled.

With that volume in place, and with the macOS installer sitting in /Applications/Install\ macOS\ [VERSION].app, run the following command in your terminal to create a bootable install media (for Sierra):

sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ Sierra.app --nointeraction

prwhite

# Add the following 'help' target to your Makefile
# And add help text after each target name starting with '\#\#'
 
help:           ## Show this help.
	@fgrep -h "##" $(MAKEFILE_LIST) | fgrep -v fgrep | sed -e 's/\\$$//' | sed -e 's/##//'
 
# Everything below is an example
 
target00:       ## This message will show up when typing 'make help'
	@echo does nothing

rdmarsh

#!/usr/bin/env bash

########################################
###
### This code is under version control
### See the following link before making changes
### https://gist.github.com/rdmarsh/e60f8de3da853c493518
###
########################################

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

olih

Processing JSON using jq

jq is useful to slice, filter, map and transform structured json data.

Installing jq

On Mac OS

brew install jq

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

bradmontgomery

#!/bin/bash


DOMAIN=$1;

if [ -z "$DOMAIN" ]; then

    echo "USAGE: ./digger <your-domain>"

else

jkrasnay

# Convert to TSV
# Note -r flag
# to_entries creates an array of key,value maps, the trailing [] converts this array to stream items
cat api-docs.json | jq -r '.paths | to_entries[] | .key as $path | .value | to_entries[] | [.key,$path,.value.tags[0]] | @tsv'

# Transform into different JSON...
cat api-docs.json | jq '[ .paths | to_entries[] | .key as $path | .value | to_entries[] | { path:$path, method:.key, tag:.value.tags[0] } ]'