Instructions on how to setup RaspberryPi without any monitor / HDMI. You should only need to have the MicroSD, USB power, and a Pi with wireless.
I tested this on a Raspberry Pi Zero 2 W
- Go here and get RaspberryPi Imager https://www.raspberrypi.com/software/
- Start up the Imager app.
- Install the recommended image or whatever you want
- will need a micro SD card to write the OS image to.
- Once the image has been copied over to the SD card then make a file
wpa_supplicant.conf
under/boot
on the SD with the content.