One Paragraph of project description goes here
These instructions will get you a copy of the project up and running on your local machine for development and testing purposes. See deployment for notes on how to deploy the project on a live system.
Following the general process documented `here`_ (for the Udoo board) we can also create the equivalent card for the basic Neo board variants using mainline u-boot and linux-stable (with one or two minor changes). Note the card has a single partition for the rootfs and no /boot partition.
Since the state of vendor-specific support for various boards in mainline can be highly variable, we'll add the same features for Neo boards that
language: python | |
# ===== Linux ====== | |
os: linux | |
dist: xenial | |
python: | |
- 2.7 | |
- 3.6 | |
- 3.7 | |
- 3.8 | |
- 3.9 |
This document lays out a set of Python packaging practices. I don't claim they are best practices, but they fit my needs, and might fit yours.
This document has been superseded as of January 2023.
This was written in July 2020, superseding this gist from 2019.
copy rootfs.ubi and boot.img to the root of a FAT32 formatted USB flash drive, and plug it into CHIP | |
boot CHIP into FEL mode | |
from FEL mode do: | |
sunxi-fel spl sunxi-spl.bin | |
sunxi-fel write 0x4a000000 u-boot-dtb.bin | |
sunxi-fel write 0x43000000 spl-400000-4000-500.bin | |
sunxi-fel exe 0x4a000000 | |
from a serial console booted into u-boot do: |