Configure minicom with minicom -s
and enter the “File transfer protocols” section. You can add a section there called “binary”, point it at your file, and specify:
Field | Value |
---|---|
Name | Binary |
Program | bin-xfer -o %l |
Name | Y |
U/D | U |
FullScr | Y |
Configure minicom with minicom -s
and enter the “File transfer protocols” section. You can add a section there called “binary”, point it at your file, and specify:
Field | Value |
---|---|
Name | Binary |
Program | bin-xfer -o %l |
Name | Y |
U/D | U |
FullScr | Y |
rtl-sdr build notes for OSX | |
using macports http://www.macports.org/ | |
see http://sdr.osmocom.org/trac/wiki/rtl-sdr | |
brew install cmake | |
brew install libusb | |
brew install pkgconfig | |
brew install sox # for easy audio | |
git clone git://git.osmocom.org/rtl-sdr.git | |
cd rtl-sdr/ |
import datetime | |
def xldate_to_datetime(xldate): | |
temp = datetime.datetime(1900, 1, 1) | |
delta = datetime.timedelta(days=xldate) | |
return temp+delta |
// Tektronix Circuit Computer Reproduction | |
// Ed Nisley KE4ZNU - 2019-11 | |
//----- | |
// Library routines | |
include("tracepath.inc.gcmc"); | |
include("engrave.inc.gcmc"); | |
TekOD = to_mm(7.75in); // orginal Tek Circuit Computer diameter |
//found this code here | |
//https://gist.github.com/speters/f889faec42b510052a6ab4be437d38ca | |
//Purpose is to simply run a memory check on ATMEGA238P to test for counterfeit parts | |
#include <avr/boot.h> | |
#define SIGRD 5 | |
void setup() { | |
// put your setup code here, to run once: | |
Serial.begin(115200); |
/* --------------------------------------------------- | |
Ultra Low Power LED flasher | |
LED is connected to PA4 and is high active. | |
Jan 16th, 2021, CPLDCPU - Initial version | |
---------------------------------------------------- */ | |
#include <stdint.h> |
String str1,str2; | |
bool onUSB = false; | |
bool onBattery = false; | |
bool lowBattery = false; | |
unsigned long pwrCheckTimeStart;//to check power every 10sec | |
void setup() { | |
// INITIAL POWER CHECK | |
int powerSource = System.powerSource(); |