This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ toit serial reinstall --firmware v1.6.0-pre.32+621224922 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 --debug | |
Detecting chip type. This can take up to 10s. | |
Reinstalling hardware with firmware: v1.6.0-pre.32+621224922 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
$ toit serial info --output table | |
+-------------------------------------------------------------------------+-----------+--------------------------------------+ | |
| NAME | MODEL | HARDWARE ID | | |
+-------------------------------------------------------------------------+-----------+--------------------------------------+ | |
| 4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c.744.2021-09-26.device.toitware.com | esp32-4mb | 4c2a0869-49c3-4fe7-834e-ce3a6a9e2b7c | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ toit serial reinstall --firmware v1.6.0-pre.32+621224922 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 --debug | |
Detecting chip type. This can take up to 10s. | |
Reinstalling hardware with firmware: v1.6.0-pre.32+621224922 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/065380270/otadata435014453 0x10000 /tmp/065380270/ota_0823418640" | |
esptool.py v3.0 | |
Serial port /dev/ttyUSB0 | |
Connecting...... | |
Chip is ESP32-D0WDQ6 (revision 1) | |
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
Crystal is 40MHz |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 --debug | |
Detecting chip type. This can take up to 10s. | |
Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/258977641/otadata163226036 0x10000 /tmp/258977641/ota_0164300675" | |
esptool.py v3.0 | |
Serial port /dev/ttyUSB0 | |
Connecting.... | |
Chip is ESP32-D0WDQ6 (revision 1) | |
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
Crystal is 40MHz |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ toit serial reinstall --firmware v1.6.0-pre.33+3fba4aea7 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 --debug | |
Detecting chip type. This can take up to 10s. | |
Reinstalling hardware with firmware: v1.6.0-pre.33+3fba4aea7 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/092705268/otadata413179075 0x10000 /tmp/092705268/ota_0390544710" | |
esptool.py v3.0 | |
Serial port /dev/ttyUSB0 | |
Connecting....... | |
Chip is ESP32-D0WDQ6 (revision 1) | |
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
Crystal is 40MHz |
OlderNewer