slimcdk
/ 1637847063.maturix-sim-9690.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:33
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/797797621/otadata959218128 0x10000 /tmp/797797621/ota_0569561839" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846799.maturix-sim-9690.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:28
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/106746245/otadata218861856 0x10000 /tmp/106746245/ota_0458249215" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting....... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846581.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:24
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/830338688/otadata877195231 0x10000 /tmp/830338688/ota_0453304242" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846373.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.4.2.log
Created
November 25, 2021 13:22
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/825494838/otadata655889181 0x10000 /tmp/825494838/ota_0295004632" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846096.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:16
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=nbiot.tdc.dk --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/325127044/otadata716654355 0x10000 /tmp/325127044/ota_0800936790" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637846000.toit-sim-4786.hardware_id-a966ebf8-6407-4964-9685-95ac15170168.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:14
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/776750000/otadata047105359 0x10000 /tmp/776750000/ota_0138637922" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637845585.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
Created
November 25, 2021 13:07
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/460670395/otadata711917534 0x10000 /tmp/460670395/ota_0595382693" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting...... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637845392.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:05
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/652478058/otadata968224449 0x10000 /tmp/652478058/ota_0545660716" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637845248.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.5.0-rc.1.log
Created
November 25, 2021 13:02
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.5.0-rc.1 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.5.0-rc.1 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/637697839/otadata870898882 0x10000 /tmp/637697839/ota_0743187257" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting..... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |
slimcdk
/ 1637844957.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
Created
November 25, 2021 12:59
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0 | |
| Detecting chip type. This can take up to 10s. | |
| Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0 | |
| Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/832545673/otadata801397588 0x10000 /tmp/832545673/ota_0506376355" | |
| esptool.py v3.0 | |
| Serial port /dev/ttyUSB0 | |
| Connecting.... | |
| Chip is ESP32-D0WDQ6 (revision 1) | |
| Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None | |
| Crystal is 40MHz |