synic

void setup_timer(void) {
    rcc_periph_clock_enable(RCC_TIM3);
    timer_reset(TIM3);
    timer_set_mode(TIM3, TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);
    timer_set_prescaler(TIM3, 0);
    timer_set_clock_division(TIM3, 0);
    timer_set_period(TIM3, PERIOD);
    timer_set_oc_mode(TIM3, TIM_OC1, TIM_OCM_PWM1);
    timer_set_oc_polarity_high(TIM3, TIM_OC1);
/*    timer_set_dma_on_compare_event(TIM3);*/

synic

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDP/WdCKQUYF7Z1qBrcELpgQxzgrpTsoQlS/edyQmsJk9BsJx8fpsSgFtaVUDt4f+MG0KjNWLR2bgfJvSYETol661QFMXE7IpgTy1jsDBdIqDN0CD8/BLDJgex6p4TMQ6e8PjdiCupWXXdeR2rkRGAFP39tVO1UUsS923O2MjXLo3H0KuiQQzNSC6D0BQGIMk7Z0Xm8NfZZR2ym/m6748zSmvii4AZDba6FXV/xHyfPaJbVHIRPADfHec6fAXAO39Q+erQ47Nbp4NGCmWU4xCmqfgljcA0MGzgjhMBX2qYlgt2ia3vZUOgv8hDf/Zc1Ebz7gf4tDA8AWtzXJaCI7mzj synic@be

synic

[synic@manetheren neoclock (g:qfn*)]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +92.0°C  (crit = +100.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +91.0°C  (high = +95.0°C, crit = +105.0°C)
Core 2:       +93.0°C  (high = +95.0°C, crit = +105.0°C)