tkersey

found at: http://fascinated.fm/post/2379188731/getting-a-motorola-sbg6580-into-bridge-mode-on

Getting a Motorola SBG6580 into “Bridge” mode on TimeWarner Wideband

1. Unplug coax cable from Motorola
2. Hold down the white reset button on the back panel with a pen for 30s.  This resets all settings to factory defaults. The modem will be auto-reconfigured once you plug in the coax cable.
3. When modem is back on plug in a computer with an Ethernet cable into the modem.
4. Connect to http://192.168.0.1 and login with “admin” / “motorola”
5. Now you will make some changes:
 

• Wireless -> Primary Network -> Disabled

jboone

void sgpio_irqhandler() {
	SGPIO_CLR_STATUS_1 = 0xFFFFFFFF;

	uint32_t* const p32 = &usb_bulk_buffer[buffer_offset];
	volatile const uint32_t* const sgpio_reg_ss_base = SGPIO_PORT_BASE + 0x100;
	
	p32[7] = SGPIO_REG_SS(SGPIO_SLICE_A);
	p32[6] = SGPIO_REG_SS(SGPIO_SLICE_I);
	p32[5] = SGPIO_REG_SS(SGPIO_SLICE_E);
	p32[4] = SGPIO_REG_SS(SGPIO_SLICE_J);

TomTasche

// more information here: http://blog.tomtasche.at/2012/10/use-built-in-feedback-mechanism-on.html

try {
    int i = 3 / 0;
} catch (Exception e) {
    ApplicationErrorReport report = new ApplicationErrorReport();
    report.packageName = report.processName = getApplication()
        .getPackageName();
    report.time = System.currentTimeMillis();
    report.type = ApplicationErrorReport.TYPE_CRASH;

klange

Since this is on Hacker News and reddit...

• No, I don't distribute my résumé like this. A friend of mine made a joke about me being the kind of person who would do this, so I did (the link on that page was added later). My actual résumé is a good bit crazier.
• I apologize for the use of _t in my types. I spend a lot of time at a level where I can do that; "reserved for system libraries? I am the system libraries".
• Since people kept complaining, I've fixed the assignments of string literals to non-const char *s.
• My use of type * name, however, is entirely intentional.
• If you're using an older compiler, you might have trouble with the anonymous unions and the designated initializers - I think gcc 4.4 requires some extra braces to get them working together. Anything reasonably recent should work fine. Clang and gcc (newer than 4.4, at le

leifg

This is an example of adding Jenkins build status to a [dashing-dashboard](https://github.com/Shopify/dashing

If a job is running, the widget will have a grey background. If a job succeeded at its last run, it will have a green background. If a job failed at its last run, it will have a red background.

Requirements:

• Ruby 1.9
• dashing

chadedrupt

ko.validation.configure({
    insertMessages: true,
    decorateElement: true,
    errorElementClass: 'error',
    errorMessageClass: 'help-inline'
});

jwalton

Flying Widgets adds CSS3 transitions to your dashboard, allowing you to cycle through multiple widget sets on a single TV without page reloads, using stylish CSS3 transitions. You can even still re-order your widgets and save their locations!

Note that sinatra-cyclist is a potential alternative if the machine you use to display your dashboards is lacking in graphics horsepower.

To use, put this file in assets/javascripts/cycleDashboard.coffee. Then find this line in application.coffee:

    $('.gridster ul:first').gridster

tdfischer

#!/usr/bin/env python
# makekey.py - A key making tool
# This program will accept a pin configuration for a Schalge 5 Pin lock and produce GCode to mill out the corresponding key.
#
# For example, this will produce a bump key:
# $ ./makekey.py 99999
#
# This could produce a key to something else:
# $ ./makekey.py 38457
#

snobear

#!/usr/bin/env python
"""

NOTE: 
This gist has been moved to EZmomi: 

   https://github.com/snobear/ezmomi
  
Give it a star or fork.  Contributions are more than welcome.  I'm hoping it will become an easy cli tool for
common VMware tasks.

lrivallain

# load PowerCli Snapin
if ((Get-PSSnapin -Name VMware.Vimautomation.Core -ErrorAction SilentlyContinue) -eq $null ) {
    Add-PsSnapin VMware.Vimautomation.Core
}

# vCenter server
$VC = "vcenter.domain"
$Username = "domain\user"

# connecting vCenter