takataka5614

void setup() {
  pinMode(11, OUTPUT);
}
 
void loop() {
  digitalWrite(11, HIGH);
  delay(1000);
  digitalWrite(11, LOW);
  delay(1000);
}

takataka5614

//1602 LCD 文字表示
#include <LiquidCrystal.h>

// PIN割り当ての構文は以下の通り
// LiquidCrystal(rs, enable, d4, d5, d6, d7)
// ということで、rs:7 enable:8 d4:9 d5:10 d6:11 d7:12 に割り当て
LiquidCrystal lcd(7, 8, 9, 10, 11, 12);

void setup() {
// LCDの行と列を設定

takataka5614

/* ESP32 で LCD に文字表示 
 * 
 */
 
#include <LiquidCrystal.h>

LiquidCrystal lcd(32,25,26,27,14,13);

void setup()
{

takataka5614

/* ボード上のLEDをブリンク 
 * ESP32 LED Blink 
 * 
 * ON Board LED GPIO 2
 */
 
#define LED 2      // このピンNo.を変更すればボード外のLEDを点滅
 
void setup()
{

takataka5614

/* ESP32でLCDに文字表示 
 *
 */
 
 #include <LiquidCrystal.h>

LiquidCrystal lcd(32,25,26,27,14,13);

void setup()
{

takataka5614

#define OnB_LED 2
boolean togLED = false;

volatile int timeCounter1;
hw_timer_t *timer1 = NULL; 
portMUX_TYPE timerMux = portMUX_INITIALIZER_UNLOCKED;

void IRAM_ATTR onTimer1(){

  portENTER_CRITICAL_ISR(&timerMux);

takataka5614

#define OnB_LED 2

int LedState = 0;
unsigned long previousMillis = 0;

void setup() {
  pinMode(OnB_LED, OUTPUT);
}

void loop()

takataka5614

/*********************************************/
/*             最もシンプルなLチカ             */
/*********************************************/

#define OnB_LED 2
 
void setup() {
  pinMode(OnB_LED, OUTPUT);
}
  

takataka5614

#include <M5Stack.h>

// the setup routine runs once when M5Stack starts up
void setup(){

  // Initialize the M5Stack object
  M5.begin();
  
  // LCD display
  M5.Lcd.println("Hello World");

takataka5614

#include <M5Stack.h>
#define LED_PIN 16 // 16番ピンにLED接続

// the setup routine runs once when M5Stack starts up
void setup(){
  M5.begin(); // Initialize the M5Stack object
  pinMode(LED_PIN, OUTPUT);
}

// the loop routine runs over and over again forever