mattbell87

VSCode Remote: Connect to WSL2 from another machine

Do you want to do remote development on your WSL2 container in Visual Studio Code? Read this.

Proxy jump method

1. On the host set up OpenSSH for Windows
2. Run wsl --update to make sure you are running the latest WSL
3. Open WSL and install another SSH server inside WSL with sudo apt-get install openssh-server
4. Now run sudo systemctl enable --now ssh to automatically start ssh when WSL starts.

rikka0w0

The Digilent JTag uses FT2232, but its configuration EEPROM contains secrete data needed to be recoginzed by Xilinx ISE/Vivado. The following method only works on linux (tested on Ubuntu16.04), but the patched FT2232 doggle also works on Windows. Since WSL1 does not provide USB device access, the following method will not work for WSL1.

DONT use FT_Prog on offical Digilent cable, as it can trash the firmware! The offical eeprom contains secrete data that cannot be handled correctly by FT_Prog.

Here are steps to create a Digilent-like Jtag that can be used in Xilinx ISE and Vivado

1. Install softwares: sudo apt-get install libftdi1 ftdi-eeprom
2. Create a file "flash_digilent.conf" with the following content:

shirhatti

Launch Sublime Text 3 from the Mac OS X Terminal

tl;dr

• Open Terminal
• Type ln -s /Applications/Sublime\ Text.app/Contents/SharedSupport/bin/subl /usr/local/bin/sublime
• Type sublime

Give me the full story

walkerjeffd

Configure Synology NAS as Git Server

Instructions for setting up a git server on a Synology NAS with Diskstation. Specifically, I am using a DS414 with DSM 5.0.

Set Up User and Folder

• Create user gituser via Diskstation interface (with File Station and WebDAV privilages)
• Add new shared folder called git (located at /volume1/git) with read/write access for gituser and admin. This folder will hold all the repos.
• Install Git Server package via Diskstation

scturtle

import eyed3
import re
import glob

def get_lyric(lrc):
    text = open(lrc).read()
    text = re.sub(r'(?:\[.*\])+', '', text).strip()
    text = map(lambda l: l.strip(), text.split('\n'))
    ans = []
    for l in text:

PeterDing

#!/usr/bin/env python2
# vim: set fileencoding=utf8

import re, sys, os, random, time, json, urllib2, logging, argparse
from mutagen.id3 import ID3,TRCK,TIT2,TALB,TPE1,APIC,TDRC,COMM,TCOM,TCON,TSST,WXXX,TSRC
from HTMLParser import HTMLParser
parser = HTMLParser()
s = u'\x1b[1;%dm%s\x1b[0m'       # terminual color template

ua = 'Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36'

yanyaoer

# vim: set et sw=4 ts=4 sts=4 fdm=syntax ff=unix fenc=utf8:
#!/usr/bin/python
import json
from subprocess import Popen
import urllib2

_url = 'http://douban.fm/j/mine/playlist?type=n&h=&channel=0'

req = urllib2.urlopen(urllib2.Request(_url))
obj = json.load(req)