conorbuck

var p1 = {
	x: 20,
	y: 20
};

var p2 = {
	x: 40,
	y: 40
};

ialpert

function download(url, cb) {
  var data = "";
  var request = require("http").get(url, function(res) {

    res.on('data', function(chunk) {
      data += chunk;
    });

    res.on('end', function() {
      cb(data);

jeffcrouse

#include <Poco/Net/HTTPClientSession.h>
#include <Poco/Net/HTTPRequest.h>
#include <Poco/Net/HTTPResponse.h>
#include <Poco/StreamCopier.h>
#include <Poco/Path.h>
#include <Poco/URI.h>
#include <Poco/Exception.h>

using namespace Poco::Net;
using namespace Poco;

jvcleave

#ON THE RPI (if you haven't downloaded openFrameworks)

cd
curl -O http://192.237.185.151/versions/nightly/of_v20151008_linuxarmv6l_nightly.tar.gz
mkdir openFrameworks
tar vxfz of_v20151008_linuxarmv6l_nightly.tar.gz -C openFrameworks --strip-components 1
cd /home/pi/openFrameworks/scripts/linux/debian
sudo ./install_dependencies.sh

#INSTALL SMB WITH / ACCESS

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

avillp

/*
Unportify is a script that exports your Google Play music to text.
Copyright (C) 2016  Arnau Villoslada
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

probonopd

Autodesk Fusion 360 on Linux

In the Web Browser

Ubuntu, Fedora, openSUSE, CentOS, SUSE Linux Enterprise, Debian,... users can finally use Autodesk Fusion 360 in the Linux Browser now.

https://myhub.autodesk360.com

On Chromium 55.0.2843.0 I get NET::ERR_CERTIFICATE_TRANSPARENCY_REQUIRED.

peteryates

I'm getting adverts in my TV's UI, help!

Samsung's otherwise excellent 2016 range of UHD TVs received an update that added advertisements to the UI. This has been complained about at great length on Samsung's forums and repeatedly, Samsung have refused to add an option to remove them.

The ads interrupt the clean UI of the TV and are invasive. Here's an example of how they look:

This guide was originally posted on Samsung's TV forums but unfortunately, that site is a super-slow and barely accessible unusable mess.

Misairu-G

Reddit post (Archived)

Table of Content

• What to expect?
  • Some TLDR about the idea behind
• Prerequisites
  • Hardware
  • System & Software
• Update: Attention for MUXless laptop

alepez

#!/bin/sh

if [ "${1}" == "forever" ]; then
  while sleep 1; do "${0}"; done
  exit 0
fi

export DISPLAY=:0

# url="http://jsfiddle.net/gionaf/Ugc5g/embedded/result/"