The Github doesn't provide country code for Brazil (+55). To add this option, just run the code below in your console. The option Brazil +55
will be the first on the list, already selected:
🇧🇷 [pt-BR]
The Github doesn't provide country code for Brazil (+55). To add this option, just run the code below in your console. The option Brazil +55
will be the first on the list, already selected:
🇧🇷 [pt-BR]
When using a USG with Ubiquiti's Unifi Controller software (version 5.6 and earlier), the functionality of integrating the hostnames of clients (when they request a DHCP lease) into local DNS does not appear to work as you would find with Consumer grade routers. To work around this limitation, we can add static host mappings to a configuration file that will be provisioned to the USG when either a configuration change is made or we force provisioning to the USG itself.
I've added in the necessary syntax for adding Cloudflare DDNS to the USG for VPN/Services setup courtesy of this post by britannic on the Ubiquiti Forums.
NOTE: Content below is written by Adrian Mace. Click here for an updated version.
Below are the key settings that I apply on any unifi installation for optimal performance.
Enable Advanced Features
is enabled# Instructions for installing Pi-hole 4.2 on UniFi CloudKey Gen 1 (UC-CK) running firmware 0.13.6 | |
# Pi-hole will need to be completely re-installed after every FW update or if CloudKey is reset to defaults. | |
# Verify UC-CK is running firmware v0.13.6 (or later) before installing Pi-hole. If not, do: | |
ubnt-systool fwupdate https://dl.ubnt.com/unifi/stage/cloudkey/firmware/UCK/UCK.mtk7623.v0.13.6.7ad551e.190225.0939.bin | |
# UC-CK firmware v0.13.6 downgrades UniFi Controller to 5.10.17. Upgrade to 5.10.19 with: | |
cd /tmp | |
wget https://dl.ubnt.com/unifi/5.10.19/unifi_sysvinit_all.deb | |
dpkg -i unifi_sysvinit_all.deb |