xblax

                             **************************************************************
                             * bootSerialMainEboardMcu()                                  *
                             **************************************************************
                             undefined bootSerialMainEboardMcu(void)
                               assume LRset = 0x0
                               assume TMode = 0x1
             undefined         r0:1           <RETURN>
             undefined1        Stack[-0x3d]:1 local_3d                                XREF[1]:     00028c24(W)  
             undefined1        Stack[-0x3e]:1 local_3e                                XREF[1]:     00028c20(W)  
             undefined4        Stack[-0x48]:4 local_48                                XREF[2]:     00028c46(R), 

xblax

Klipper Mod for Flashforge Adventurer M5 (Pro)

This is an unofficial mod to run Moonraker, custom Klipper, Mainsail & Fluidd on the Flashforge ADM5 (Pro) 3D printers and unlock the full power of open source software.

This mod is still in an early stage. The base features are functional, but it's not a polished and ready-to-use replacement for all stock features.

The mod is designed to be fully removable and not break any functions of the stock software. But if you install it, then please be aware, that you risk to loose warranty or damage the printer. Proceed at your own risk if you want to try this mod!

What's working

• Klipper 0.11
• Moonraker on port 7125