xmesaj2

1. Add a virtual serial port to the VM using PVE Web GUI and restart the VM

2. Enable and start the virtual serial port on VM, change tty number as needed (Reference: https://askubuntu.com/a/621209/838946)
$ sudo systemctl enable serial-getty@ttyS0.service
$ sudo systemctl start serial-getty@ttyS0.service

3. Done! You can now select xterm.js in the PVE Web GUI

xmesaj2

How to setup VA-API within Proxmox LXC Unprivileged container

Proxmox configuration

No drivers need to be installed on the proxmox, from now called host.

Find GIDs of video and render group on host:

cat /etc/group | grep video

cat /etc/group | grep render

xmesaj2

apt update && apt upgrade -y
apt install apt-transport-https curl vim wget sudo gnupg2 -y
echo "deb https://downloads.plex.tv/repo/deb public main" | tee /etc/apt/sources.list.d/plexmediaserver.list
curl https://downloads.plex.tv/plex-keys/PlexSign.key | apt-key add -
apt update
apt install plexmediaserver
systemctl status plexmediaserver
systemctl enable plexmediaserver
apt update && apt install -y curl gpg
mkdir -p /etc/apt/keyrings

xmesaj2

Enable HEIC

apt install php-imagick imagemagick config.php

'enabledPreviewProviders' => 
  array (
    'OC\Preview\PNG',
    'OC\Preview\JPEG',
    'OC\Preview\GIF',
    'OC\Preview\BMP',

xmesaj2

ethtool -K enp5s0 rx-vlan-offload off
ethtool -s enp5s0 autoneg off speed 2500
ethtool -s enp5s0 autoneg off speed 100
ethtool -s enp5s0 autoneg off speed 1000



$ cat /etc/network/interfaces
-------------------------------------------
auto lo