pixma_debug-success.log

[sanei_debug] Setting debug level of pixma to 255.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.0
[pixma] pixma_collect_devices() found Canon imageCLASS MF4150 at libusb:001:005-04a9-26a3-00-00
[pixma] sanei_bjnp_find_devices:
[pixma] No devices specified in configuration file.
[pixma] Added all configured scanners, now do auto detection...
[pixma] lo0 is IPv6 capable, sending broadcast, socket = 3
[pixma] lo0 is not a valid IPv4 interface, skipping...
[pixma] lo0 is not a valid IPv6 interface, skipping...
[pixma] en0 is IPv6 capable, sending broadcast, socket = 4
[pixma] en0 is IPv4 capable, sending broadcast, socket = 5
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 4: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 4: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] scanner discovery finished...
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon imageCLASS MF4150 at libusb:001:005-04a9-26a3-00-00
[pixma] sanei_bjnp_find_devices:
[pixma] No devices specified in configuration file.
[pixma] Added all configured scanners, now do auto detection...
[pixma] lo0 is IPv6 capable, sending broadcast, socket = 3
[pixma] lo0 is not a valid IPv4 interface, skipping...
[pixma] lo0 is not a valid IPv6 interface, skipping...
[pixma] en0 is IPv6 capable, sending broadcast, socket = 6
[pixma] en0 is IPv4 capable, sending broadcast, socket = 7
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 6: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 6: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] scanner discovery finished...
[pixma] pixma_open(): Canon imageCLASS MF4150
[pixma] Trying to clear the interrupt buffer...
[pixma]   no packets in buffer
[pixma] Reader task id=4396187648 (threaded)
[pixma] Reader task started
[pixma] 
[pixma] pixma_scan(): start
[pixma]   line_size=1920 image_size=1683840 channels=3 depth=8
[pixma]   dpi=75x75 offset=(0,0) dimension=640x877
[pixma]   gamma_table=0x7feb31845b88 source=0
[pixma]   threshold=127 threshold_curve=0
[pixma] raw_width = 640
[pixma] OUT  T=9.619 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00 
[pixma] 
[pixma] IN   T=9.621 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 00 03 00 00 74 
[pixma] 

( omitted lines )

[pixma]  00000170:ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff 
[pixma] 
[pixma] OUT  T=28.029 len=11
[pixma]  00000000:d4 20 00 00 00 00 00 00  04 00 06 
[pixma] 
[pixma] IN   T=28.031 len=8
[pixma]  00000000:06 06 38 00 00 00 00 00  
[pixma] 
[pixma] OUT  T=29.631 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00 
[pixma] 
[pixma] IN   T=29.633 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 00 03 00 00 74 
[pixma] 
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] OUT  T=29.636 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00 
[pixma] 
[pixma] IN   T=29.638 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 00 03 00 00 74 
[pixma] 
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] OUT  T=29.641 len=20
[pixma]  00000000:cf 60 00 00 00 00 00 00  0a 00 01 00 00 00 00 00 
[pixma]  00000010:00 00 00 ff 
[pixma] 
[pixma] IN   T=29.643 len=2
[pixma]  00000000:06 06 
[pixma] 
[pixma] OUT  T=29.646 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00 
[pixma] 
[pixma] IN   T=29.648 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 00 03 00 00 74 
[pixma] 
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] pixma_read_image():completed
[pixma] Reader task terminated
[pixma] pixma_close(): Canon imageCLASS MF4150