Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
[sanei_debug] Setting debug level of pixma to 255.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.0
[pixma] pixma_collect_devices() found Canon imageCLASS MF4150 at libusb:001:005-04a9-26a3-00-00
[pixma] sanei_bjnp_find_devices:
[pixma] No devices specified in configuration file.
[pixma] Added all configured scanners, now do auto detection...
[pixma] lo0 is IPv6 capable, sending broadcast, socket = 3
[pixma] lo0 is not a valid IPv4 interface, skipping...
[pixma] lo0 is not a valid IPv6 interface, skipping...
[pixma] en0 is IPv6 capable, sending broadcast, socket = 4
[pixma] en0 is IPv4 capable, sending broadcast, socket = 5
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 4: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 4: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] scanner discovery finished...
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon imageCLASS MF4150 at libusb:001:005-04a9-26a3-00-00
[pixma] sanei_bjnp_find_devices:
[pixma] No devices specified in configuration file.
[pixma] Added all configured scanners, now do auto detection...
[pixma] lo0 is IPv6 capable, sending broadcast, socket = 3
[pixma] lo0 is not a valid IPv4 interface, skipping...
[pixma] lo0 is not a valid IPv6 interface, skipping...
[pixma] en0 is IPv6 capable, sending broadcast, socket = 6
[pixma] en0 is IPv4 capable, sending broadcast, socket = 7
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 6: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 3: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] bjnp_send_broadcast: Socket: 6: sent only ffffffff = -1 bytes of packet, error = No route to host
[pixma] scanner discovery finished...
[pixma] pixma_open(): Canon imageCLASS MF4150
[pixma] Trying to clear the interrupt buffer...
[pixma] no packets in buffer
[pixma] Reader task id=4396187648 (threaded)
[pixma] Reader task started
[pixma]
[pixma] pixma_scan(): start
[pixma] line_size=1920 image_size=1683840 channels=3 depth=8
[pixma] dpi=75x75 offset=(0,0) dimension=640x877
[pixma] gamma_table=0x7feb31845b88 source=0
[pixma] threshold=127 threshold_curve=0
[pixma] raw_width = 640
[pixma] OUT T=9.619 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=9.621 len=14
[pixma] 00000000:06 06 03 01 00 41 03 00 41 00 03 00 00 74
[pixma]
( omitted lines )
[pixma] 00000170:ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[pixma]
[pixma] OUT T=28.029 len=11
[pixma] 00000000:d4 20 00 00 00 00 00 00 04 00 06
[pixma]
[pixma] IN T=28.031 len=8
[pixma] 00000000:06 06 38 00 00 00 00 00
[pixma]
[pixma] OUT T=29.631 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=29.633 len=14
[pixma] 00000000:06 06 03 01 00 41 03 00 41 00 03 00 00 74
[pixma]
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] OUT T=29.636 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=29.638 len=14
[pixma] 00000000:06 06 03 01 00 41 03 00 41 00 03 00 00 74
[pixma]
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] OUT T=29.641 len=20
[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00
[pixma] 00000010:00 00 00 ff
[pixma]
[pixma] IN T=29.643 len=2
[pixma] 00000000:06 06
[pixma]
[pixma] OUT T=29.646 len=10
[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00
[pixma]
[pixma] IN T=29.648 len=14
[pixma] 00000000:06 06 03 01 00 41 03 00 41 00 03 00 00 74
[pixma]
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] Current status: paper=1 cal=3 lamp=0
[pixma] pixma_read_image():completed
[pixma] Reader task terminated
[pixma] pixma_close(): Canon imageCLASS MF4150
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment