Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Star 56 You must be signed in to star a gist
  • Fork 19 You must be signed in to fork a gist
  • Save 4abhinavjain/893ec13c651bee08088c8f4661998952 to your computer and use it in GitHub Desktop.
Save 4abhinavjain/893ec13c651bee08088c8f4661998952 to your computer and use it in GitHub Desktop.
DIY install debian on Oracle Cloud Infrastructure ( Free Tier ) - ARM64
# should works on any cloud-init enabled hypervisor (openstack.. )
# start from a normal ubuntu 20.04 install as minimal was not available for ARM64
# Since ARM64 machines has higher RAM, Shrinking is desired but not necessary. Instead we will increase tmpfs to 1700MB
# Getting root (if sudo -i doesn't work then set a root password beforehand using 'sudo passwd root'
sudo -i
# make sure we are on the highest kernel, so we can delete all the others ...
sudo apt update && sudo apt dist-upgrade -y && sudo apt install lsof && sudo reboot
# snap removal didn't work so proceed without it.
sudo snap remove --purge oracle-cloud-agent && sudo snap remove --purge core18
sudo apt purge -y $(dpkg-query -Wf '${Package}\n' | grep header) $(apt list --installed | grep -oP "^linux.*\d\d\d\d-oracle" | grep -v "$(uname -r)") linux-modules-extra-$(uname -r) lxc* lxd* vim* && sudo apt -y autoremove && sudo apt -y autoclean && sudo apt -y clean
sudo rm -rf /var/log/* /var/lib/apt/lists/*
# use df to check the size. It should be now ~1100MB. If it is higher than 1700 MB then increase the size below
# make sure you have root here
cd /
mount -t tmpfs -o size=1700m tmpfs mnt
tar --one-file-system -c . | tar -C /mnt -x
mount --make-private -o remount,rw /
mount --move dev mnt/dev
mount --move proc mnt/proc
mount --move run mnt/run
mount --move sys mnt/sys
sed -i '/^[^#]/d;' mnt/etc/fstab
echo 'tmpfs / tmpfs defaults 0 0' >> mnt/etc/fstab
cd mnt
mkdir old_root
mount --make-private /
unshare -m
pivot_root . old_root
# commands below open 1022 port a ssh port. Please ensure the port you select is open under Oracle's VNIC
/usr/sbin/sshd -D -p 1022 &
iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 1022 -j ACCEPT
# reconnect on port 1022: I kept the old putty session (on port 22) open and it didn't disconnect
# now the root storage is the RAM
pkill agetty
pkill dbus-daemon
pkill atd
pkill iscsid
pkill rpcbind
pkill unattended-upgrades
kill 1
# check with "lsof /old_root" that there is no remaining process
umount -l /dev/sda1
# check :
df -h
lsblk
# the disk should be unmount ; for me lsblk showed a /dev/sda1 partiion but it went well.
# now, just copy the debian cloud image on the disk.
# I wanted an ARM64 image and Debian 10 , therefore I used this one https://cloud.debian.org/cdimage/cloud/buster/latest/debian-10-generic-arm64.tar.xz
curl -L https://cloud.debian.org/cdimage/cloud/buster/latest/debian-10-generic-arm64.tar.xz | tar -OJxvf - disk.raw | dd of=/dev/sda bs=1M
sync
reboot
# reboot command didn't work and returned an error "running in chroot, ignoring request" ; I tried exiting as they told here (https://bbs.archlinux.org/viewtopic.php?id=184076) but it was of no use
# I forced rebooted it from the Oracle instances' GUI and it seemed stuck on "STOPPING." But after an hour I noticed that the VM was rebooted and running.
# I was able to login with the same public key as original ubuntu, but the username that worked was debian
# SUCCESS!! I checked with lsb_release -a and it showed Debian 10 (earlier it was showing ubuntu)
# Additional things: You may want to reinstall the Oracle cloud agent that was removed in the beginning.
@shoopea
Copy link

shoopea commented Jul 12, 2023

I noticed sudo stopped working when following your steps.
I got it fixed by using that extra command after the reboot : echo -e "127.0.1.1\t`hostname`" >> /etc/hosts

@fliespl
Copy link

fliespl commented Sep 1, 2023

Anyone had success with debian 12?

@33Fraise33
Copy link

Anyone had success with debian 12?

Jup works perfectly

@tm4dev
Copy link

tm4dev commented Sep 14, 2023

Thanks for useful tutorial.
This one easier way https://github.com/bohanyang/debi

@KITE2459
Copy link

If i using ssh with password in ubuntu 22.04 lts not minimal,
After this how to do .txt, ssh connections still remain with password connection? just changed user ubuntu to debian? Or need private key file when i made ubuntu oci instance?

@backslash112
Copy link

Wondering why no grub config required...

@romor001
Copy link

Worked fine with the Debian 10 image. Did a manual upgrade to Debian 11 afterwards. Thanks a lot for this! Much apreciated!

@nepto
Copy link

nepto commented Feb 20, 2024

It still works well. Good job!

The image for the Debian/12 (Bookworm) is:
https://cloud.debian.org/images/cloud/bookworm/latest/debian-12-generic-arm64.tar.xz

@4abhinavjain
Copy link
Author

Great! Glad ghait works on Debian 12 as well. Thanks for the feedback

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment