Skip to content

Instantly share code, notes, and snippets.

@5v3n
Last active August 29, 2015 13:56
Show Gist options
  • Save 5v3n/9052773 to your computer and use it in GitHub Desktop.
Save 5v3n/9052773 to your computer and use it in GitHub Desktop.
raspberryPi wireless setup - edit the files then reboot
--/etc/network/interfaces:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
--/etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="YOURSSID"
psk="YOURPASSWORD"
# Protocol type can be: RSN (for WP2) and WPA (for WPA1)
proto=WPA
# Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
key_mgmt=WPA-PSK
# Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
pairwise=TKIP
#Authorization option should be OPEN for both WPA1/WPA2 (in less commonly used are SHARED and LEAP)
auth_alg=OPEN
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment