Skip to content

Instantly share code, notes, and snippets.

View 5v3n's full-sized avatar

Sven Kräuter 5v3n

71 followers · 94 following
View GitHub Profile
@5v3n
5v3n / pi wireless setup
Last active August 29, 2015 13:56
raspberryPi wireless setup - edit the files then reboot
--/etc/network/interfaces:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
@5v3n
5v3n / piBeacon
Created February 17, 2014 15:26
Corrected some typos in the bluez setup guide on http://learn.adafruit.com/pibeacon-ibeacon-with-a-raspberry-pi/setting-up-the-pi
sudo apt-get install libusb-dev libdbus-1-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev
sudo mkdir bluez
cd bluez
sudo wget www.kernel.org/pub/linux/bluetooth/bluez-5.11.tar.xz
sudo unxz bluez-5.11.tar.xz
sudo tar xvf bluez-5.11.tar
cd bluez-5.11
sudo ./configure --disable-systemd
sudo make && sudo make install
@5v3n
5v3n / ybeacon
Last active August 29, 2015 13:56
Bluetooth for the YUN for devices not listed automatically via hciconfig
root@gretelomat:~# lsusb
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0b05:17cb ASUSTek Computer, Inc.
Bus 001 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
root@gretelomat:~# echo 0b05 17cb > /sys/bus/usb/drivers/btusb/new_id
root@gretelomat:~# hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 00:02:72:C9:0E:AA ACL MTU: 1021:8 SCO MTU: 64:1
DOWN
@5v3n
5v3n / ruby on linino
Created February 15, 2014 00:25
Fix broken ruby on Linino - using precompiled ruby packages. Work in Progress...
- Download and extract https://docs.google.com/file/d/0B54xzz44RpW6YlpaQXV3M2hTQVk to /tmp
# cd tmp
- ruby core
# opkg install libyaml libdb47 libruby_1.9.3-p429-1_ar71xx.ipk ruby-core_1.9.3-p429-1_ar71xx.ipk ruby_1.9.3-p429-1_ar71xx.ipk
# ruby -v
ruby 1.9.3p429 (2013-05-15 revision 40747) [mips-linux]