ActiveMQ-SimpleAuth-Sec.xml

ActiveMQ-SimpleAuth-Sec.xml

<!--
    Licensed to the Apache Software Foundation (ASF) under one or more
    contributor license agreements.  See the NOTICE file distributed with
    this work for additional information regarding copyright ownership.
    The ASF licenses this file to You under the Apache License, Version 2.0
    (the "License"); you may not use this file except in compliance with
    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<!-- START SNIPPET: example -->
<beans
  xmlns="http://www.springframework.org/schema/beans"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
  http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd">


   <bean id="environmentVariablesConfiguration" class="org.jasypt.encryption.pbe.config.EnvironmentStringPBEConfig">
  <property name="algorithm" value="PBEWithMD5AndDES" />
  <property name="passwordEnvName" value="ACTIVEMQ_ENCRYPTION_PASSWORD" />
</bean>
                                                                      
<bean id="configurationEncryptor" class="org.jasypt.encryption.pbe.StandardPBEStringEncryptor">
  <property name="config" ref="environmentVariablesConfiguration" />
</bean> 
     
<bean id="propertyConfigurer" class="org.jasypt.spring31.properties.EncryptablePropertyPlaceholderConfigurer">
  <constructor-arg ref="configurationEncryptor" />
  <property name="location" value="file:${activemq.base}/conf/credentials-enc.properties"/>
</bean>

   <!-- Allows accessing the server log -->
    <bean id="logQuery" class="io.fabric8.insight.log.log4j.Log4jLogQuery"
          lazy-init="false" scope="singleton"
          init-method="start" destroy-method="stop">
    </bean>

    <!--
        The <broker> element is used to configure the ActiveMQ broker.
    -->
    <broker xmlns="http://activemq.apache.org/schema/core" brokerName="localhost" dataDirectory="${activemq.data}">


<plugins>
<simpleAuthenticationPlugin>
  <users>
    <authenticationUser username="${admin.username}"
        password="${admin.password}"
        groups="users,admins"/>
    <authenticationUser username="testuser"
        password="${testuser.password}"
        groups="users"/>
    <authenticationUser username="testguest"
        password="${testguest.password}"
        groups="guests"/>
  </users>
</simpleAuthenticationPlugin>



<authorizationPlugin>
  <map>
    <authorizationMap>
      <authorizationEntries>
        <authorizationEntry queue=">" read="admins" write="admins" admin="admins"/>
        <authorizationEntry queue="USERS.>" read="users" write="users" admin="users"/>
        <authorizationEntry queue="GUEST.>" read="guests" write="guests,users" admin="guests,users"/>
        <authorizationEntry topic=">" read="admins" write="admins" admin="admins"/>
        <authorizationEntry topic="USERS.>" read="users" write="users" admin="users"/>
        <authorizationEntry topic="GUEST.>" read="guests" write="guests,users" admin="guests,users"/>
        <authorizationEntry topic="ActiveMQ.Advisory.>" read="guests,users" write="guests,users" admin="guests,users"/>
      </authorizationEntries>
    </authorizationMap>
  </map>
</authorizationPlugin>

</plugins>

        <destinationPolicy>

            <policyMap>
              <policyEntries>
                <policyEntry topic=">" >
                    <!-- The constantPendingMessageLimitStrategy is used to prevent
                         slow topic consumers to block producers and affect other consumers
                         by limiting the number of messages that are retained
                         For more information, see:

                         http://activemq.apache.org/slow-consumer-handling.html

                    -->
                  <pendingMessageLimitStrategy>
                    <constantPendingMessageLimitStrategy limit="1000"/>
                  </pendingMessageLimitStrategy>
                </policyEntry>
              </policyEntries>
            </policyMap>
        </destinationPolicy>


        <!--
            The managementContext is used to configure how ActiveMQ is exposed in
            JMX. By default, ActiveMQ uses the MBean server that is started by
            the JVM. For more information, see:

            http://activemq.apache.org/jmx.html
        -->
        <managementContext>
            <managementContext createConnector="false"/>
        </managementContext>

        <!--
            Configure message persistence for the broker. The default persistence
            mechanism is the KahaDB store (identified by the kahaDB tag).
            For more information, see:

            http://activemq.apache.org/persistence.html
        -->
        <persistenceAdapter>
            <kahaDB directory="${activemq.data}/kahadb"/>
        </persistenceAdapter>


          <!--
            The systemUsage controls the maximum amount of space the broker will
            use before disabling caching and/or slowing down producers. For more information, see:
            http://activemq.apache.org/producer-flow-control.html
          -->
          <systemUsage>
            <systemUsage>
                <memoryUsage>
                    <memoryUsage percentOfJvmHeap="70" />
                </memoryUsage>
                <storeUsage>
                    <storeUsage limit="100 gb"/>
                </storeUsage>
                <tempUsage>
                    <tempUsage limit="50 gb"/>
                </tempUsage>
            </systemUsage>
        </systemUsage>

        <!--
            The transport connectors expose ActiveMQ over a given protocol to
            clients and other brokers. For more information, see:

            http://activemq.apache.org/configuring-transports.html
        -->
        <transportConnectors>
            <!-- DOS protection, limit concurrent connections to 1000 and frame size to 100MB -->
            <transportConnector name="openwire" uri="tcp://0.0.0.0:61616?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
            <transportConnector name="amqp" uri="amqp://0.0.0.0:5672?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
            <transportConnector name="stomp" uri="stomp://0.0.0.0:61613?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
            <transportConnector name="mqtt" uri="mqtt://0.0.0.0:1883?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
            <transportConnector name="ws" uri="ws://0.0.0.0:61614?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
        </transportConnectors>

        <!-- destroy the spring context on shutdown to stop jetty -->
        <shutdownHooks>
            <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
        </shutdownHooks>

    </broker>

    <!--
        Enable web consoles, REST and Ajax APIs and demos
        The web consoles requires by default login, you can disable this in the jetty.xml file

        Take a look at ${ACTIVEMQ_HOME}/conf/jetty.xml for more details
    -->
    <import resource="jetty.xml"/>

</beans>
<!-- END SNIPPET: example -->

Hello Sarav,

Firstly, thank you so much for the www.middlewareinventory.com blog. it is really helpful and resourceful.

I'd just have an issue on my ActiveMQ setup and configuration. I have followed everything on your blog in setting up an encrypted broker using a simple authentication plugin. Everything works but NOT on when posting a message or browsing queues from the console.

https://www.middlewareinventory.com/blog/active-mq-installation-and-security-setup-and-hardening-step-by-step/
https://www.middlewareinventory.com/blog/how-to-solve-auth-error-browsing-the-queue-topic-in-activemq-web-console/

I'm getting message exception below whenever I hit the queues or run a curl command.
Caused by: javax.servlet.ServletException: Could not post JMS message: javax.jms.JMSSecurityException: User name [system] or password is invalid.

I hope you are able to help me to resolve this issue?

Thank you so much in advance.