Skip to content

Instantly share code, notes, and snippets.

[153]HELLO! BOOT0 is starting!
[156]BOOT0 commit : 4656b05
[159]set pll start
[161]periph0 has been enabled
[164]set pll end
[166]unknow PMU
[168]PMU: AXP806
[175]vaild para:1 select dram para0
[178]board init ok
[180]DRAM BOOT DRIVE INFO: V0.532
U-Boot SPL 2021.04 (May 16 2021 - 14:37:09 +0000)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.4(debug):v11.19.1-v32-Pre-2751-7-g9ab862fc
NOTICE: BL31: Built : 14:37:06, May 16 2021
NOTICE: BL31: Detected Allwinner H616 SoC (1823)
NOTICE: BL31: Found U-Boot DTB at 0x4a086940, model: Tanix TX6s
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.12.7 (rudi@7716491ae936) (aarch64-minimyth-linux-gnu-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36) #1 SMP PREEMPT Sun May 30 11:02:46 UTC 2021
[ 0.000000] Machine model: Tanix TX6s
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000005000000 (options '115200n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
/dts-v1/;
/memreserve/ 0x0000000048000000 0x0000000001000000;
/memreserve/ 0x0000000043000000 0x00000000000bc501;
/ {
interrupt-parent = <0x1>;
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "sun50iw9";
compatible = "allwinner,h616", "arm,sun50iw9p1";
@Ahmed-Nabit
Ahmed-Nabit / tx6
Created August 22, 2022 09:58 — forked from heitbaum/tx6
tx6:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.18.7 (docker@29e7d7ae2354) (aarch64-none-elf-gcc-11.3.0 (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sat Jun 25 14:21:39 UTC 2022
[ 0.000000] Machine model: Tanix TX6
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[11898.325387] ------------[ cut here ]------------
[11898.325405] WARNING: CPU: 1 PID: 1220 at drivers/mmc/core/sdio_irq.c:253 sdio_release_irq+0x124/0x140
[11898.325431] Modules linked in: 8021q garp mrp stp llc bnep rtw88_8822cs(-) rtw88_8822c sunxi_cir rtw88_sdio hci_uart crct10dif_ce rtw88_core btqca btrtl btbcm mac80211 dwmac_sun8i libarc4 btintel bluetooth hantro_vpu(C) ecdh_generic panfrost v4l2_vp9 ecc v4l2_h264 drm_shmem_helper gpu_sched sun50i_di cfg80211 rfkill pkcs8_key_parser fuse
[11898.325528] CPU: 1 PID: 1220 Comm: rmmod Tainted: G WC 5.18.7 #1
[11898.325535] Hardware name: Tanix TX6 (DT)
[11898.325540] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[11898.325547] pc : sdio_release_irq+0x124/0x140
[11898.325555] lr : rtw_sdio_remove+0x7c/0xd0 [rtw88_sdio]
[11898.325570] sp : ffff80000a74bc20
[11898.325573] x29: ffff80000a74bc20 x28: ffff000002933600 x27: 0000000000000000