Akagi201/samba.md

## samba.md

      
    Raw
  

              samba.md
            
          
    win8 共享目录给mac


网络 -> 更改高级共享设置
控制面板 -> 管理工具 -> 本地安全策略 -> 安全设置 -> 本地策略 -> 安全选项 -> 账户: 使用空密码的本地账户只允许进行控制台登陆 -> 已禁用
smb连接 -> 用户名 + 密码为空
http://benyouhui.it168.com/thread-4716574-1-1.html

最简单配置


https://wiki.archlinux.org/index.php/Samba_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)
sudo pdbedit -a -u akagi201, 一条命令即可, 默认共享目录为家目录, windows下 \ip\akagi201 来访问
发现能浏览但不能写入, 修改/etc/samba/smb.conf

samba on mac


brew update brew install samba
akagi201@akrmbp /usr/local/Cellar/samba/3.6.23/etc (master) $ sudo cp /Volumes/akagi201/smb.conf .
sudo pdbedit -a -u akagi201
linux client sudo mount.cifs -o username=akagi201,password=xxxx //akrmbp/akagi201 ~/mnt
http://www.pandeqiang.com/linux-mount-the-samba-method.htm

[global]

security = user

[home]

browseable = yes

read only = no

create mask = 0644

directory mask = 0755

Mac OS X下访问samba


Finder -> Go -> Connect to Server... (CMD + k)
地址栏 smb://ip/目录 (例如: smb://192.168.1.102/akagi201)
输入密码连接, 共享目录会记录在finder左侧shared处.


## smb-debian.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0644

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0755

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


## smb-gentoo.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
   workgroup = MYGROUP

# server string is the equivalent of the NT Description field
   server string = Samba Server

# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
   security = user

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;   realm = MY_REALM

# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration. If you're
# migrating from < samba 3.4, you'll have to convert your old user
# passwords to the new backend with the command:
# pdbedit -i smbpasswd:/var/lib/samba/private/smbpasswd -e
;   passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /etc/samba/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
   dns proxy = no

# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
;  add user script = /usr/sbin/useradd %u
;  add group script = /usr/sbin/groupadd %g
;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
;  delete user script = /usr/sbin/userdel %u
;  delete user from group script = /usr/sbin/deluser %u %g
;  delete group script = /usr/sbin/groupdel %g


#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = yes
   writable = yes
   read only = no
   create mask = 0644
   directory mask = 0755

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765
	#
	# Sample configuration file for the Samba suite for Debian GNU/Linux.
	#
	#
	# This is the main Samba configuration file. You should read the
	# smb.conf(5) manual page in order to understand the options listed
	# here. Samba has a huge number of configurable options most of which
	# are not shown in this example
	#
	# Some options that are often worth tuning have been included as
	# commented-out examples in this file.
	# - When such options are commented with ";", the proposed setting
	# differs from the default Samba behaviour
	# - When commented with "#", the proposed setting is the default
	# behaviour of Samba but the option is considered important
	# enough to be mentioned here
	#
	# NOTE: Whenever you modify this file you should run the command
	# "testparm" to check that you have not made any basic syntactic
	# errors.
	# A well-established practice is to name the original file
	# "smb.conf.master" and create the "real" config file with
	# testparm -s smb.conf.master >smb.conf
	# This minimizes the size of the really used smb.conf file
	# which, according to the Samba Team, impacts performance
	# However, use this with caution if your smb.conf file contains nested
	# "include" statements. See Debian bug #483187 for a case
	# where using a master file is not a good idea.
	#

	#======================= Global Settings =======================

	[global]

	## Browsing/Identification ###

	# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

	# server string is the equivalent of the NT Description field
	server string = %h server

	# Windows Internet Name Serving Support Section:
	# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
	# wins support = no

	# WINS Server - Tells the NMBD components of Samba to be a WINS Client
	# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
	; wins server = w.x.y.z

	# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

	# What naming service and in what order should we use to resolve host names
	# to IP addresses
	; name resolve order = lmhosts host wins bcast

	#### Networking ####

	# The specific set of interfaces / networks to bind to
	# This can be either the interface name or an IP address/netmask;
	# interface names are normally preferred
	; interfaces = 127.0.0.0/8 eth0

	# Only bind to the named interfaces and/or networks; you must use the
	# 'interfaces' option above to use this.
	# It is recommended that you enable this feature if your Samba machine is
	# not protected by a firewall or is a firewall itself. However, this
	# option cannot handle dynamic or non-broadcast interfaces correctly.
	; bind interfaces only = yes



	#### Debugging/Accounting ####

	# This tells Samba to use a separate log file for each machine
	# that connects
	log file = /var/log/samba/log.%m

	# Cap the size of the individual log files (in KiB).
	max log size = 1000

	# If you want Samba to only log through syslog then set the following
	# parameter to 'yes'.
	# syslog only = no

	# We want Samba to log a minimum amount of information to syslog. Everything
	# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
	# through syslog you should set the following parameter to something higher.
	syslog = 0

	# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


	####### Authentication #######

	# "security = user" is always a good idea. This will require a Unix account
	# in this server for every user accessing the server. See
	# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
	# in the samba-doc package for details.
	security = user

	# You may wish to use password encryption. See the section on
	# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
	encrypt passwords = true

	# If you are using encrypted passwords, Samba will need to know what
	# password database type you are using.
	passdb backend = tdbsam

	obey pam restrictions = yes

	# This boolean parameter controls whether Samba attempts to sync the Unix
	# password with the SMB password when the encrypted SMB password in the
	# passdb is changed.
	unix password sync = yes

	# For Unix password sync to work on a Debian GNU/Linux system, the following
	# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
	# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully .

	# This boolean controls whether PAM will be used for password changes
	# when requested by an SMB client instead of the program listed in
	# 'passwd program'. The default is 'no'.
	pam password change = yes

	# This option controls how unsuccessful authentication attempts are mapped
	# to anonymous connections
	map to guest = bad user

	########## Domains ###########

	# Is this machine able to authenticate users. Both PDC and BDC
	# must have this setting enabled. If you are the BDC you must
	# change the 'domain master' setting to no
	#
	; domain logons = yes
	#
	# The following setting only takes effect if 'domain logons' is set
	# It specifies the location of the user's profile directory
	# from the client point of view)
	# The following required a [profiles] share to be setup on the
	# samba server (see below)
	; logon path = \\%N\profiles\%U
	# Another common choice is storing the profile in the user's home directory
	# (this is Samba's default)
	# logon path = \\%N\%U\profile

	# The following setting only takes effect if 'domain logons' is set
	# It specifies the location of a user's home directory (from the client
	# point of view)
	; logon drive = H:
	# logon home = \\%N\%U

	# The following setting only takes effect if 'domain logons' is set
	# It specifies the script to run during logon. The script must be stored
	# in the [netlogon] share
	# NOTE: Must be store in 'DOS' file format convention
	; logon script = logon.cmd

	# This allows Unix users to be created on the domain controller via the SAMR
	# RPC pipe. The example command creates a user account with a disabled Unix
	# password; please adapt to your needs
	; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

	# This allows machine accounts to be created on the domain controller via the
	# SAMR RPC pipe.
	# The following assumes a "machines" group exists on the system
	; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

	# This allows Unix groups to be created on the domain controller via the SAMR
	# RPC pipe.
	; add group script = /usr/sbin/addgroup --force-badname %g

	########## Printing ##########

	# If you want to automatically load your printer list rather
	# than setting them up individually then you'll need this
	# load printers = yes

	# lpr(ng) printing. You may wish to override the location of the
	# printcap file
	; printing = bsd
	; printcap name = /etc/printcap

	# CUPS printing. See also the cupsaddsmb(8) manpage in the
	# cupsys-client package.
	; printing = cups
	; printcap name = cups

	############ Misc ############

	# Using the following line enables you to customise your configuration
	# on a per machine basis. The %m gets replaced with the netbios name
	# of the machine that is connecting
	; include = /home/samba/etc/smb.conf.%m

	# Most people will find that this option gives better performance.
	# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
	# for details
	# You may want to add the following on a Linux system:
	# SO_RCVBUF=8192 SO_SNDBUF=8192
	# socket options = TCP_NODELAY

	# The following parameter is useful only if you have the linpopup package
	# installed. The samba maintainer and the linpopup maintainer are
	# working to ease installation and configuration of linpopup and samba.
	; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

	# Domain Master specifies Samba to be the Domain Master Browser. If this
	# machine will be configured as a BDC (a secondary logon server), you
	# must set this to 'no'; otherwise, the default behavior is recommended.
	# domain master = auto

	# Some defaults for winbind (make sure you're not using the ranges
	# for something else.)
	; idmap uid = 10000-20000
	; idmap gid = 10000-20000
	; template shell = /bin/bash

	# The following was the default behaviour in sarge,
	# but samba upstream reverted the default because it might induce
	# performance issues in large organizations.
	# See Debian bug #368251 for some of the consequences of not
	# having this setting and smb.conf(5) for details.
	; winbind enum groups = yes
	; winbind enum users = yes

	# Setup usershare options to enable non-root users to share folders
	# with the net usershare command.

	# Maximum number of usershare. 0 (default) means that usershare is disabled.
	; usershare max shares = 100

	# Allow users who've been granted usershare privileges to create
	# public shares, not just authenticated ones
	usershare allow guests = yes

	#======================= Share Definitions =======================

	[homes]
	comment = Home Directories
	browseable = yes

	# By default, the home directories are exported read-only. Change the
	# next parameter to 'no' if you want to be able to write to them.
	read only = no

	# File creation mask is set to 0700 for security reasons. If you want to
	# create files with group=rw permissions, set next parameter to 0775.
	create mask = 0644

	# Directory creation mask is set to 0700 for security reasons. If you want to
	# create dirs. with group=rw permissions, set next parameter to 0775.
	directory mask = 0755

	# By default, \\server\username shares can be connected to by anyone
	# with access to the samba server.
	# The following parameter makes sure that only "username" can connect
	# to \\server\username
	# This might need tweaking when using external authentication schemes
	valid users = %S

	# Un-comment the following and create the netlogon directory for Domain Logons
	# (you need to configure Samba to act as a domain controller too.)
	;[netlogon]
	; comment = Network Logon Service
	; path = /home/samba/netlogon
	; guest ok = yes
	; read only = yes

	# Un-comment the following and create the profiles directory to store
	# users profiles (see the "logon path" option above)
	# (you need to configure Samba to act as a domain controller too.)
	# The path below should be writable by all users so that their
	# profile directory may be created the first time they log on
	;[profiles]
	; comment = Users profiles
	; path = /home/samba/profiles
	; guest ok = no
	; browseable = no
	; create mask = 0600
	; directory mask = 0700

	[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
	guest ok = no
	read only = yes
	create mask = 0700

	# Windows clients look for this share name as a source of downloadable
	# printer drivers
	[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
	browseable = yes
	read only = yes
	guest ok = no
	# Uncomment to allow remote administration of Windows print drivers.
	# You may need to replace 'lpadmin' with the name of the group your
	# admin users are members of.
	# Please note that you also need to set appropriate Unix permissions
	# to the drivers directory for these users to have write rights in it
	; write list = root, @lpadmin

	# A sample share for sharing your CD-ROM with others.
	;[cdrom]
	; comment = Samba server's CD-ROM
	; read only = yes
	; locking = no
	; path = /cdrom
	; guest ok = yes

	# The next two parameters show how to auto-mount a CD-ROM when the
	# cdrom share is accesed. For this to work /etc/fstab must contain
	# an entry like this:
	#
	# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
	#
	# The CD-ROM gets unmounted automatically after the connection to the
	#
	# If you don't want to use auto-mounting/unmounting make sure the CD
	# is mounted on /cdrom
	#
	; preexec = /bin/mount /cdrom
	; postexec = /bin/umount /cdrom