touch normal supeend and resume -works

touch_resume.log

[112720.995531 / 01-02 14:53:28.864][3] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:4
[112720.995538 / 01-02 14:53:28.864][3] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
[112720.995541 / 01-02 14:53:28.864][3] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
[112721.004173 / 01-02 14:53:28.874][0] [hl_mode] hl_mode off
[112721.009444 / 01-02 14:53:28.874][3] [Display] mdss_dsi_blank+: ctrl=ffffffc075a1a018 ndx=0 power_state=0
[112721.011629 / 01-02 14:53:28.884][1] [Display] mdss_dsi_panel_off: ctrl=ffffffc075a1a018 ndx=0
[112721.102271 / 01-02 14:53:28.974][1] [Touch] LCD_EVENT_LCD_MODE!
[112721.102291 / 01-02 14:53:28.974][1] [Touch] lcd_mode: 0 (prev: 3)
[112721.102300 / 01-02 14:53:28.974][1] [Touch] U0 mode change
[112721.102312 / 01-02 14:53:28.974][1] [Touch] touch_suspend Start
[112721.102334 / 01-02 14:53:28.974][1] [Touch] sw49407_suspend : touch_suspend start
[112721.102341 / 01-02 14:53:28.974][1] [Touch] Skip lpwg_mode
[112721.105563 / 01-02 14:53:28.974][0] [Touch] touch_suspend End
[112721.105581 / 01-02 14:53:28.974][0] [Display] mdss_dsi_panel_off:-
[112721.106120 / 01-02 14:53:28.974][0] [Display] mdss_dsi_blank-:End
[112721.106139 / 01-02 14:53:28.974][0] [Display] mdss_dsi_off+: ctrl=ffffffc075a1a018 ndx=0 power_state=0
[112721.107597 / 01-02 14:53:28.974][0] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
[112721.108086 / 01-02 14:53:28.974][0] [Display] mdss_dsi_off-:
[112721.114554 / 01-02 14:53:28.984][0] mdss_fb_blank_sub: mdss_fb_blank_sub: -
[112721.114591 / 01-02 14:53:28.984][0] Transitioning 0 to 4
[112721.114598 / 01-02 14:53:28.984][0] [Touch] FB_BLANK
[112721.120917 / 01-02 14:53:28.994][0] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0
[112721.216730 / 01-02 14:53:29.084][0] dhd_set_suspend: force extra Suspend setting 
[112721.216832 / 01-02 14:53:29.084][0] Runtime Resume is called in dhd_wl_ioctl
[112721.217593 / 01-02 14:53:29.084][1] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[112721.222803 / 01-02 14:53:29.094][3] msm_pcie_enable: PCIe RC0 PHY is ready!
[112721.233173 / 01-02 14:53:29.104][3] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[112721.268860 / 01-02 14:53:29.134][3] msm_pcie_enable: PCIe RC0 link initialized
[112721.269297 / 01-02 14:53:29.134][3] dhdpcie_resume_dev: Enter
[112721.274443 / 01-02 14:53:29.144][0] wl_host_event_get_data: Invalid event frame, err = -30
[112721.282385 / 01-02 14:53:29.154][3] dhd_prot_ioctl: status ret value is -17 
[112721.575832 / 01-02 14:53:29.444][2] [Touch] sw49407_clear_q_sensitivity : NORMAL(0)
[112721.575873 / 01-02 14:53:29.444][2] [Touch] LPWG_UPDATE_ALL: mode[1], screen[OFF], sensor[FAR], qcover[OPEN]
[112721.577101 / 01-02 14:53:29.444][2] [Touch] LPWG Active Area - NORMAL
[112721.577131 / 01-02 14:53:29.444][2] [Touch] TCI1-type:4
[112721.580052 / 01-02 14:53:29.454][3] [Touch] sw49407_lpwg_control mode = 1
[112721.580482 / 01-02 14:53:29.454][3] [Touch] swipe disable
[112721.580508 / 01-02 14:53:29.454][3] [Touch] sw49407_tc_driving = 0, 1
[112721.580944 / 01-02 14:53:29.454][3] [Touch] DDI Display Mode = 0
[112721.582033 / 01-02 14:53:29.454][1] [Touch] Reset Cnt : 70
[112721.712471 / 01-02 14:53:29.584][3] [Touch] TC_Driving OK
[112722.385534 / 01-02 14:53:30.254][2] dhdpcie_suspend_dev: Enter
[112722.410939 / 01-02 14:53:30.284][2] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[112725.490835 / 01-02 14:53:33.364][2] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd
[112725.660178 / 01-02 14:53:33.534][1] pet_watchdog [enable : 1, jiffies : 4306209864, delay_time : 1000]
[112727.011999 / 01-02 14:53:34.894][1] RX msgq status HW:0x0, SW:2:
[112727.022435 / 01-02 14:53:34.894][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 0
[112727.069791 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
[112727.069854 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[500], PMI_IUSB[1700], SMB_IUSB[0]
[112727.069893 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
[112727.069928 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4838]
[112727.070062 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[72], BATT_VOL[4000], BATT_TEMP[255], BATT_CUR[39062]
[112727.070100 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[CHARGING/500MA/CC], SAFTY_STATE[Set/Not yet]
[112727.070133 / 01-02 14:53:34.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[31], PA_THERM[28], BOARD_THERM[28] VTS[297]
[112728.804011 / 01-02 14:53:36.674][0] FG: update_sram_data: soc:[72], soc_raw[6893], voltage:[4063544], ocv:[4026313], current:[-439908], batt_temp:[255], charge_raw [2200315 / 3167000]
[112732.041158 / 01-02 14:53:43.554][1] RX msgq status HW:0x0, SW:2:
[112735.680540 / 01-02 14:53:43.554][1] pet_watchdog [enable : 1, jiffies : 4306210866, delay_time : 1000]
[112741.102218 / 01-02 14:53:48.974][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[2, 2], lane[1, 1], pwr[FASTAUTO_MODE, FASTAUTO_MODE], rate = 2
[112741.116359 / 01-02 14:53:48.984][0] qpnp_pon_input_dispatch: code(116), value(1)
[112741.138206 / 01-02 14:53:49.004][3] dhd_set_suspend: Remove extra suspend setting 
[112741.138238 / 01-02 14:53:49.004][3] Runtime Resume is called in dhd_wl_ioctl
[112741.138345 / 01-02 14:53:49.004][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[112741.141548 / 01-02 14:53:49.014][3] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:0
[112741.141555 / 01-02 14:53:49.014][3] [AOD][START]cur_mode : 0, blank mode : 0, aod_node : 0, keep_aod : 3
[112741.141558 / 01-02 14:53:49.014][3] [AOD][END] cmd_status : 0, next_mode : 3 labibb_ctrl : ctrl
[112741.144611 / 01-02 14:53:49.014][3] msm_pcie_enable: PCIe RC0 PHY is ready!
[112741.145274 / 01-02 14:53:49.014][2] hdmi_tx_event_handler: event = MDSS_EVENT_RESUME suspend=0, hpd_feature=0
[112741.149933 / 01-02 14:53:49.024][2] [Display] mdss_dsi_on+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=0
[112741.149938 / 01-02 14:53:49.024][2] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
[112741.158049 / 01-02 14:53:49.024][3] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[112741.158212 / 01-02 14:53:49.024][1] [Touch] NOTIFY_TOUCH_RESET! return = 0
[112741.159239 / 01-02 14:53:49.024][1] [Touch] ext_watch_get_current_time : Display[12:00:20], RTC[12:00:41]
[112741.189702 / 01-02 14:53:49.064][0] [Display] mdss_dsi_on-:
[112741.189724 / 01-02 14:53:49.064][0] [Display] mdss_dsi_unblank+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=1 ctrl_state=4
[112741.191656 / 01-02 14:53:49.064][0] [Display] mdss_dsi_panel_on: ndx=0
[112741.193548 / 01-02 14:53:49.064][3] msm_pcie_enable: PCIe RC0 link initialized
[112741.193769 / 01-02 14:53:49.064][3] dhdpcie_resume_dev: Enter
[112741.197866 / 01-02 14:53:49.064][1] [Display]lge_change_reader_mode: reader_mode_step4 or off 
[112741.198324 / 01-02 14:53:49.064][1] [Display]lge_change_reader_mode: image enhance on
[112741.201389 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[0]=0xf0,mode[0]
[112741.201394 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[1]=0x83,mode[0]
[112741.201397 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[2]=0x18,mode[0]
[112741.201400 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[3]=0x1b,mode[0]
[112741.201403 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[4]=0xf,mode[0]
[112741.201405 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[5]=0x27,mode[0]
[112741.201408 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[6]=0x25,mode[0]
[112741.201410 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[7]=0x11,mode[0]
[112741.201413 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[8]=0x77,mode[0]
[112741.201415 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[9]=0xd,mode[0]
[112741.201418 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[10]=0x13,mode[0]
[112741.201421 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[11]=0x2d,mode[0]
[112741.201424 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[12]=0x8,mode[0]
[112741.204868 / 01-02 14:53:49.074][1] trim reg before writing: 
[112741.204870 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[0]=0xf0,mode[0]
[112741.204873 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[1]=0x83,mode[0]
[112741.204876 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[2]=0x18,mode[0]
[112741.204879 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[3]=0x1b,mode[0]
[112741.204882 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[4]=0xf,mode[0]
[112741.204884 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[5]=0x27,mode[0]
[112741.204886 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[6]=0x25,mode[0]
[112741.204889 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[7]=0x11,mode[0]
[112741.204891 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[8]=0x99,mode[0]
[112741.204894 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[9]=0xd,mode[0]
[112741.204897 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[10]=0x13,mode[0]
[112741.204900 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[11]=0x2d,mode[0]
[112741.204902 / 01-02 14:53:49.074][1] [Display]Reg[0xc7],buf[12]=0x8,mode[0]
[112741.213743 / 01-02 14:53:49.084][0] trim reg after writing: 
[112741.213745 / 01-02 14:53:49.084][0] qpnp_pon_input_dispatch: code(116), value(0)
[112741.307267 / 01-02 14:53:49.174][1] [Touch] LCD_EVENT_LCD_MODE!
[112741.307292 / 01-02 14:53:49.174][1] [Touch] lcd_mode: 3 (prev: 0)
[112741.307309 / 01-02 14:53:49.174][1] [Touch] touch_resume Start
[112741.307321 / 01-02 14:53:49.174][1] [Touch] touch_resume End
[112741.307418 / 01-02 14:53:49.174][1] [Display] mdss_dsi_panel_on:-
[112741.307533 / 01-02 14:53:49.174][0] [Touch] touch_ic_init Start
[112741.307562 / 01-02 14:53:49.174][0] [Touch] sw49407_init: charger_state = 0x01
[112741.308843 / 01-02 14:53:49.174][1] [Display] mdss_dsi_unblank-:
[112741.308900 / 01-02 14:53:49.174][0] [Touch] info ptr addr read : 0026425C
[112741.309986 / 01-02 14:53:49.184][3] [Touch] tc status read : 0F7000C0
[112741.309998 / 01-02 14:53:49.184][3] [Touch] ========== Info ADDR ==========
[112741.310006 / 01-02 14:53:49.184][3] [Touch] chip_info_addr        : 025C
[112741.310014 / 01-02 14:53:49.184][3] [Touch] reg_info_addr         : 0264
[112741.310020 / 01-02 14:53:49.184][3] [Touch] ========== Info ADDR ==========
[112741.310027 / 01-02 14:53:49.184][3] [Touch] Model ID is loaded
[112741.310034 / 01-02 14:53:49.184][3] [Touch] Production Test info checksum is ok
[112741.315291 / 01-02 14:53:49.184][1] mdss_fb_blank_sub: mdss_fb_blank_sub: -
[112741.315334 / 01-02 14:53:49.184][1] Transitioning 4 to 0
[112741.315341 / 01-02 14:53:49.184][1] [Touch] FB_UNBLANK
[112741.315731 / 01-02 14:53:49.184][3] [Touch] ==Print PT info Data==
[112741.315775 / 01-02 14:53:49.184][3] [Touch] version : v1.07, chip : 9, protocol : 4
[112741.315775 / 01-02 14:53:49.184][3] [Touch] 
[112741.315775 / 01-02 14:53:49.184][3] [Touch] fpc : 2, lcm : 4, lot : 9
[112741.315775 / 01-02 14:53:49.184][3] [Touch] product id : L1L57P1
[112741.315775 / 01-02 14:53:49.184][3] [Touch] flash boot : idle, done, crc : ok
[112741.315798 / 01-02 14:53:49.184][3] [Touch] ==Print Config Header Data==
[112741.315823 / 01-02 14:53:49.184][3] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
[112741.320371 / 01-02 14:53:49.194][1] [Touch] resume Partial
[112741.326252 / 01-02 14:53:49.194][1] [Touch] LPWG Active Area - NORMAL
[112741.326310 / 01-02 14:53:49.194][1] [Touch] TCI1-type:4
[112741.331463 / 01-02 14:53:49.204][3] [Touch] sw49407_lpwg_control mode = 1
[112741.336814 / 01-02 14:53:49.204][3] [Touch] swipe disable
[112741.336870 / 01-02 14:53:49.204][3] [Touch] sw49407_tc_driving = 5, 385
[112741.337501 / 01-02 14:53:49.204][0] [Touch] DDI Display Mode = 3
[112741.338945 / 01-02 14:53:49.204][1] [Touch] Reset Cnt : 71
[112741.354532 / 01-02 14:53:49.224][1] lge,blmap: br_lvl(40) -> bl_lvl(56)
[112741.354557 / 01-02 14:53:49.224][1] mdss_fb_set_backlight: [AOD] Save unset_bl_level(56) in U3 mode. Will be updated when kick off function
[112741.359891 / 01-02 14:53:49.234][3] lge,blmap: br_lvl(44) -> bl_lvl(64)
[112741.359915 / 01-02 14:53:49.234][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(64) in U3 mode. Will be updated when kick off function
[112741.361134 / 01-02 14:53:49.234][2] [Touch] sw49407_te_info : 547, 16.69 ms, 59.89 hz
[112741.361196 / 01-02 14:53:49.234][2] [Touch] touch_ic_init End
[112741.361671 / 01-02 14:53:49.234][1] [Touch] LPWG_UPDATE_ALL: mode[1], screen[ON], sensor[FAR], qcover[OPEN]
[112741.361692 / 01-02 14:53:49.234][1] [Touch] resume ts->lpwg.screen on
[112741.361995 / 01-02 14:53:49.234][1] [Touch] sw49407_lpwg_control mode = 0
[112741.366256 / 01-02 14:53:49.234][1] [Touch] swipe disable
[112741.366271 / 01-02 14:53:49.234][1] [Touch] sw49407_tc_driving = 3, 185
[112741.366806 / 01-02 14:53:49.234][1] [Touch] DDI Display Mode = 3
[112741.367436 / 01-02 14:53:49.234][1] [Touch] Reset Cnt : 71
[112741.370617 / 01-02 14:53:49.244][2] mdss_fb_update_backlight: [Display] backlight sent to panel :64 in mdss_fb_update_backlight
[112741.372896 / 01-02 14:53:49.244][2] qpnp_wled_module_en : wled module enable
[112741.376059 / 01-02 14:53:49.244][1] lge,blmap: br_lvl(47) -> bl_lvl(69)
[112741.389963 / 01-02 14:53:49.264][2] [Touch] TC_Driving OK
[112741.392250 / 01-02 14:53:49.264][0] lge,blmap: br_lvl(50) -> bl_lvl(76)
[112741.408798 / 01-02 14:53:49.274][1] lge,blmap: br_lvl(54) -> bl_lvl(89)
[112741.425560 / 01-02 14:53:49.294][1] lge,blmap: br_lvl(57) -> bl_lvl(98)
[112741.442227 / 01-02 14:53:49.314][1] lge,blmap: br_lvl(60) -> bl_lvl(108)
[112741.459002 / 01-02 14:53:49.324][1] lge,blmap: br_lvl(64) -> bl_lvl(125)
[112741.475947 / 01-02 14:53:49.344][1] lge,blmap: br_lvl(67) -> bl_lvl(139)
[112741.492532 / 01-02 14:53:49.364][1] lge,blmap: br_lvl(70) -> bl_lvl(153)
[112741.509900 / 01-02 14:53:49.384][1] lge,blmap: br_lvl(72) -> bl_lvl(162)
[112741.749987 / 01-02 14:53:49.624][0] [TM][I] XO, 30,PA0, 28,BD2, 27,VTS,293
[112742.070860 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
[112742.070927 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[500], PMI_IUSB[1700], SMB_IUSB[0]
[112742.070965 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
[112742.071004 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4832]
[112742.071040 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[72], BATT_VOL[4063], BATT_TEMP[256], BATT_CUR[-439908]
[112742.071079 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[CHARGING/500MA/CC], SAFTY_STATE[Set/Not yet]
[112742.071111 / 01-02 14:53:49.944][0] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[28], BOARD_THERM[27] VTS[290]
[112742.305347 / 01-02 14:53:50.174][0] dhdpcie_suspend_dev: Enter
[112742.325443 / 01-02 14:53:50.194][0] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[112743.443424 / 01-02 14:53:51.314][2] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd