mx6 bootlog

gistfile1.txt

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.1+ (andre@andre-Z270M-D3H) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #3 SMP Tue Dec 3 19:17:51 NZDT 2019
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: DesignA Electronics Snapper MX6 Salmon
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 19 pages/cpu s47628 r8192 d22004 u77824
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: console=ttymxc4,115200 nfsroot=192.168.2.104:/home/andre/work/salmon/rootfs,v3,tcp root=/dev/nfs ip=dhcp rw panic=5
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1024384K/1048576K available (9216K kernel code, 704K rwdata, 2656K rodata, 1024K init, 724K bss, 24192K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29297 entries in 58 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x32070000 -> 0x32470000
[    0.000000] L2C-310 errata 752271 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4d8 with crng_init=0
[    0.000000] Switching to timer-based delay loop, resolution 333ns
[    0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[    0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[    0.001077] Console: colour dummy device 80x30
[    0.001119] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[    0.001136] pid_max: default: 32768 minimum: 301
[    0.001244] LSM: Security Framework initializing
[    0.001283] Yama: becoming mindful.
[    0.001377] AppArmor: AppArmor initialized
[    0.001393] TOMOYO Linux initialized
[    0.001592] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001614] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002483] CPU: Testing write buffer coherency: ok
[    0.002514] CPU0: Spectre v2: using BPIALL workaround
[    0.002828] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003592] Setting up static identity map for 0x10100000 - 0x1010003c
[    0.003801] rcu: Hierarchical SRCU implementation.
[    0.004363] smp: Bringing up secondary CPUs ...
[    0.005216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005223] CPU1: Spectre v2: using BPIALL workaround
[    0.006207] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.006214] CPU2: Spectre v2: using BPIALL workaround
[    0.007157] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.007163] CPU3: Spectre v2: using BPIALL workaround
[    0.007296] smp: Brought up 1 node, 4 CPUs
[    0.007307] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[    0.007316] CPU: All CPU(s) started in SVC mode.
[    0.008093] devtmpfs: initialized
[    0.016772] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.016911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.016935] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.017262] pinctrl core: initialized pinctrl subsystem
[    0.017806] NET: Registered protocol family 16
[    0.019558] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.020069] audit: initializing netlink subsys (disabled)
[    0.020288] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.020702] CPU identified as i.MX6Q, silicon rev 1.2
[    0.034110] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.034121] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.034641] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.046992] cryptd: max_cpu_qlen set to 1000
[    0.063391] mxs-dma 110000.dma-apbh: initialized
[    0.064213] SCSI subsystem initialized
[    0.064447] usbcore: registered new interface driver usbfs
[    0.064505] usbcore: registered new interface driver hub
[    0.064617] usbcore: registered new device driver usb
[    0.108623] i2c i2c-0: IMX I2C adapter registered
[    0.108776] pps_core: LinuxPPS API ver. 1 registered
[    0.108785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.108807] PTP clock support registered
[    0.109648] Bluetooth: Core ver 2.22
[    0.109692] NET: Registered protocol family 31
[    0.109702] Bluetooth: HCI device and connection manager initialized
[    0.109718] Bluetooth: HCI socket layer initialized
[    0.109730] Bluetooth: L2CAP socket layer initialized
[    0.109753] Bluetooth: SCO socket layer initialized
[    0.109800] NetLabel: Initializing
[    0.109808] NetLabel:  domain hash size = 128
[    0.109815] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.109883] NetLabel:  unlabeled traffic allowed by default
[    0.110207] clocksource: Switched to clocksource mxc_timer1
[    0.693417] VFS: Disk quotas dquot_6.6.0
[    0.693519] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.694308] AppArmor: AppArmor Filesystem Enabled
[    0.702879] thermal_sys: Registered thermal governor 'step_wise'
[    0.702885] thermal_sys: Registered thermal governor 'user_space'
[    0.703262] NET: Registered protocol family 2
[    0.703889] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.703921] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.704006] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.704155] TCP: Hash tables configured (established 8192 bind 8192)
[    0.704374] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.704422] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.704644] NET: Registered protocol family 1
[    0.705348] RPC: Registered named UNIX socket transport module.
[    0.705359] RPC: Registered udp transport module.
[    0.705367] RPC: Registered tcp transport module.
[    0.705375] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.706358] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    0.706604] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    0.708284] Initialise system trusted keyrings
[    0.708488] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    0.716601] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.717516] NFS: Registering the id_resolver key type
[    0.717546] Key type id_resolver registered
[    0.717554] Key type id_legacy registered
[    0.758684] Key type asymmetric registered
[    0.758696] Asymmetric key parser 'x509' registered
[    0.758761] bounce: pool size: 64 pages
[    0.758831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.759014] io scheduler mq-deadline registered
[    0.759025] io scheduler kyber registered
[    0.761616] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX
[    0.762402] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 66, base_baud = 5000000) is a IMX
[    0.762866] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 67, base_baud = 5000000) is a IMX
[    0.763411] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 68, base_baud = 5000000) is a IMX
[    0.763908] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 69, base_baud = 5000000) is a IMX
[    1.523232] printk: console [ttymxc4] enabled
[    1.540668] brd: module loaded
[    1.555448] loop: module loaded
[    1.558748] ad_dpot 0-002f: ad5243 256-Position Digital Potentiometer registered
[    1.568819] libphy: Fixed MDIO Bus: probed
[    1.574843] pps pps0: new PPS source ptp0
[    1.581291] libphy: fec_enet_mii_bus: probed
[    1.586083] fec 2188000.ethernet eth0: registered PHC device 0
[    1.592421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.598982] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.605678] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0
[    1.611924] i2c /dev entries driver
[    1.616074] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[    1.622079] Bluetooth: HCI UART driver ver 2.3
[    1.626552] Bluetooth: HCI UART protocol H4 registered
[    1.631715] Bluetooth: HCI UART protocol BCSP registered
[    1.637044] Bluetooth: HCI UART protocol ATH3K registered
[    1.642802] sdhci: Secure Digital Host Controller Interface driver
[    1.649009] sdhci: Copyright(c) Pierre Ossman
[    1.653381] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.693147] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[    1.702270] NET: Registered protocol family 17
[    1.706910] Bluetooth: RFCOMM TTY layer initialized
[    1.711824] Bluetooth: RFCOMM socket layer initialized
[    1.717002] Bluetooth: RFCOMM ver 1.11
[    1.720781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.726122] Bluetooth: BNEP socket layer initialized
[    1.731110] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.737054] Bluetooth: HIDP socket layer initialized
[    1.742088] 8021q: 802.1Q VLAN Support v1.8
[    1.746340] Key type dns_resolver registered
[    1.750743] Registering SWP/SWPB emulation handler
[    1.760128] registered taskstats version 1
[    1.764268] Loading compiled-in X.509 certificates
[    1.770079] Key type encrypted registered
[    1.774130] AppArmor: AppArmor sha1 policy hashing enabled
[    1.779657] evm: Initialising EVM extended attributes:
[    1.784815] evm: security.selinux
[    1.788145] evm: security.SMACK64
[    1.791478] evm: security.apparmor
[    1.794895] evm: security.capability
[    1.798487] evm: HMAC attrs: 0x1
[    1.827417] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-02-18T09:30:31 UTC (4181431)
[    1.841482] fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch
[    1.850058] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[    1.860250] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[    1.878253] Sending DHCP requests ., OK
[    2.786126] IP-Config: Got DHCP answer from 192.168.2.254, my address is 192.168.2.135
[    2.794084] IP-Config: Complete:
[    2.797343]      device=eth0, hwaddr=00:1b:c5:04:19:64, ipaddr=192.168.2.135, mask=255.255.254.0, gw=192.168.2.254
[    2.807713]      host=192.168.2.135, domain=, nis-domain=(none)
[    2.813654]      bootserver=0.0.0.0, rootserver=192.168.2.104, rootpath=
[    2.813658]      nameserver0=192.168.2.254
[    2.824867] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.836246] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.843201] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.851965] cfg80211: failed to load regulatory.db
[    2.869202] VFS: Mounted root (nfs filesystem) on device 0:16.
[    2.875769] devtmpfs: mounted
[    2.882979] Freeing unused kernel memory: 1024K
[    2.894476] Run /sbin/init as init process
[    2.905518] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.917023] random: fast init done
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Initializing random number generator: OK
Saving random seed: [    5.662410] random: dd: uninitialized urandom read (512 bytes read)
OK
Starting network: ip: RTNETLINK answers: File exists
FAIL

Welcome to Buildroot
buildroot login: root