new-log

<6>[    0.000000] Initializing cgroup subsys cpu
<6>[    0.000000] Initializing cgroup subsys cpuacct
<5>[    0.000000] Linux version 3.18.115-g52414e91257d-dirty (androiabledroid@HP-ProBook-6560b) (gcc version 4.9.4 20160401 (optimized) (UBERTC-4.9.4) ) #5 SMP PREEMPT Mon Sep 16 15:03:43 IST 2019
<6>[    0.000000] Boot CPU: AArch64 Processor [410fd034]
<6>[    0.000000] Machine: Qualcomm Technologies, Inc. MSM8939 QRD SKUK
<6>[    0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x0000000085b00000, size 13 MiB
<6>[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x0000000086800000, size 85 MiB
<6>[    0.000000] Reserved memory: reserved region for node 'peripheral_region@0': base 0x000000008bd00000, size 6 MiB
<6>[    0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x000000008dd00000, size 32 MiB
<6>[    0.000000] Reserved memory: reserved region for node 'pstore_reserve_region@0': base 0x00000000dfe00000, size 2 MiB
<6>[    0.000000] Removed memory: created DMA memory pool at 0x0000000085b00000, size 13 MiB
<6>[    0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool
<6>[    0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 85 MiB
<6>[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
<6>[    0.000000] Removed memory: created DMA memory pool at 0x000000008bd00000, size 6 MiB
<6>[    0.000000] Reserved memory: initialized node peripheral_region@0, compatible id removed-dma-pool
<6>[    0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008d400000, size 8 MiB
<6>[    0.000000] Reserved memory: created CMA memory pool at 0x000000008d400000, size 8 MiB
<6>[    0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
<6>[    0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f9000000, size 112 MiB
<6>[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f9000000, size 112 MiB
<6>[    0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
<6>[    0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f8000000, size 16 MiB
<6>[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 16 MiB
<6>[    0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
<6>[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x00000000f7c00000, size 4 MiB
<6>[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f7c00000, size 4 MiB
<6>[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
<6>[    0.000000] Removed memory: created DMA memory pool at 0x00000000dfe00000, size 2 MiB
<6>[    0.000000] Reserved memory: initialized node pstore_reserve_region@0, compatible id removed-dma-pool
<6>[    0.000000] cma: Reserved 64 MiB at 0x00000000f3c00000
<7>[    0.000000] On node 0 totalpages: 759296
<7>[    0.000000]   DMA zone: 12288 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 759296 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc0b3a0f000 s18304 r0 d30848 u49152
<7>[    0.000000] pcpu-alloc: s18304 r0 d30848 u49152 alloc=12*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
<6>[    0.000000] Detected VIPT I-cache on CPU0
<6>[    0.000000] CPU features: enabling workaround for ARM erratum 845719
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 747008
<5>[    0.000000] Kernel command line: boot_cpus=0,4,5,6,7 sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 loop.max_part=7 androidboot.selinux=permissive buildvariant=userdebug androidboot.emmc=true androidboot.emmcname=HAG2e androidboot.serialno=19836c08 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ams497_720p_video:1:none
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>[    0.000000] Memory: 2715444K/3037184K available (10240K kernel code, 1134K rwdata, 3264K rodata, 2108K init, 1423K bss, 112844K reserved, 208896K cma-reserved)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
<5>[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
<5>[    0.000000]               0xffffffbdc0000000 - 0xffffffbdc3000000   (    48 MB actual)
<5>[    0.000000]     PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)
<5>[    0.000000]     fixed   : 0xffffffbffbdfb000 - 0xffffffbffbdff000   (    16 KB)
<5>[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
<5>[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0c0000000   (  3072 MB)
<5>[    0.000000]       .init : 0xffffffc001000000 - 0xffffffc00120f000   (  2108 KB)
<5>[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000c00000   ( 11776 KB)
<5>[    0.000000]       .data : 0xffffffc001233000 - 0xffffffc00134eb20   (  1135 KB)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.000000] HMP scheduling enabled.
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000] NR_IRQS:64 nr_irqs:64 0
<4>[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
<3>[    0.000000] MPM 1 irq mapping errored -517
<6>[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
<6>[    0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
<6>[    0.000020] Switched to clocksource arch_sys_counter
<6>[    0.000656] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.000669] pid_max: default: 32768 minimum: 301
<6>[    0.000765] Security Framework initialized
<6>[    0.000781] SELinux:  Initializing.
<7>[    0.000821] SELinux:  Starting in permissive mode
<6>[    0.000866] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.000877] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.001640] Initializing cgroup subsys freezer
<3>[    0.002070] /cpus/cpu@100: Missing clock-frequency property
<3>[    0.002083] /cpus/cpu@101: Missing clock-frequency property
<3>[    0.002096] /cpus/cpu@102: Missing clock-frequency property
<3>[    0.002108] /cpus/cpu@103: Missing clock-frequency property
<3>[    0.002122] /cpus/cpu@0: Missing clock-frequency property
<3>[    0.002137] /cpus/cpu@1: Missing clock-frequency property
<3>[    0.002153] /cpus/cpu@2: Missing clock-frequency property
<3>[    0.002169] /cpus/cpu@3: Missing clock-frequency property
<6>[    0.003253] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
<6>[    0.003290] ASID allocator initialised with 32768 entries
<6>[    0.014842] Configuring XPU violations to be fatal errors
<6>[    0.016666] cpu_clock_a53_init_little: A53 Power clocks configured
<6>[    0.022834] Detected VIPT I-cache on CPU4
<6>[    0.022920] CPU4: Booted secondary processor [410fd034]
<6>[    0.026777] Detected VIPT I-cache on CPU5
<6>[    0.026831] CPU5: Booted secondary processor [410fd034]
<6>[    0.030725] Detected VIPT I-cache on CPU6
<6>[    0.030779] CPU6: Booted secondary processor [410fd034]
<6>[    0.034667] Detected VIPT I-cache on CPU7
<6>[    0.034721] CPU7: Booted secondary processor [410fd034]
<6>[    0.034901] Brought up 5 CPUs
<6>[    0.034935] SMP: Total of 5 processors activated.
<6>[    0.035009] alternatives: patching kernel code
<6>[    0.055696] pinctrl core: initialized pinctrl subsystem
<6>[    0.056305] regulator-dummy: no parameters
<6>[    0.137344] NET: Registered protocol family 16
<6>[    0.220174] cpuidle: using governor ladder
<6>[    0.260172] cpuidle: using governor menu
<6>[    0.300170] cpuidle: using governor qcom
<6>[    0.301841] vdso: 2 pages (1 code @ ffffffc000c05000, 1 data @ ffffffc001238000)
<6>[    0.301918] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
<6>[    0.303375] software IO TLB [mem 0xef000000-0xef400000] (4MB) mapped at [ffffffc0af000000-ffffffc0af3fffff]
<6>[    0.304728] DMA: preallocated 256 KiB pool for atomic allocations
<3>[    0.305129] msm_smem_init: unable to create logging context
<3>[    0.305200] msm_smd_init: unable to create SMD logging context
<3>[    0.305213] msm_smd_init: unable to create SMSM logging context
<3>[    0.305575] <CORE> glink_init: unable to create log context
<3>[    0.305883] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
<3>[    0.306109] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
<3>[    0.306303] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
<3>[    0.306489] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
<3>[    0.306661] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
<3>[    0.307833] Failed to create IPC log0
<3>[    0.307846] Failed to create IPC log1
<3>[    0.307856] Failed to create IPC log2
<3>[    0.307865] Failed to create IPC log3
<3>[    0.307874] Failed to create IPC log4
<6>[    0.321529] sps:sps is ready.
<6>[    0.322261] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
<3>[    0.322575] cpu 0 reg dump setup failed
<3>[    0.322588] cpu 1 reg dump setup failed
<3>[    0.322598] cpu 2 reg dump setup failed
<3>[    0.322608] cpu 3 reg dump setup failed
<3>[    0.322619] cpu 4 reg dump setup failed
<3>[    0.322629] cpu 5 reg dump setup failed
<3>[    0.322639] cpu 6 reg dump setup failed
<3>[    0.322649] cpu 7 reg dump setup failed
<6>[    0.322697] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
<4>[    0.323169] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
<6>[    0.323184] msm_rpm_dev_probe: APSS-RPM communication over SMD
<6>[    0.326948] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
<6>[    0.326983] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
<6>[    0.327022] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
<6>[    0.327054] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<6>[    0.327152] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
<3>[    0.327167] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
<6>[    0.327189] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
<3>[    0.327207] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
<3>[    0.336039] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
<4>[    0.345109] irq: no irq domain found for /soc/pinctrl@1000000 !
<6>[    0.346261] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
<6>[    0.346932] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
<6>[    0.352408] platform a21b000.qcom,pronto: assigned reserved memory node peripheral_region@0
<6>[    0.353687] ACC: mem_acc_efuse_init: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.353790] ACC: mem_acc_parse_override_fuse_version_map: override_fuse_val=0, qcom,override-fuse-version-map tuple match found: 0
<6>[    0.353995] mem_acc_corner: 0 <--> 0 mV 
<6>[    0.354870] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.354963] cpr_read_fuse_revision: apc_corner: fuse revision = 3
<6>[    0.354990] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68309829068b3ba8, speed_bits = 2
<6>[    0.355013] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
<6>[    0.355180] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1037500 -> 1057500 uV
<6>[    0.355211] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1057500 1237500] uV
<6>[    0.355230] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
<6>[    0.355248] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
<3>[    0.375630] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
<3>[    0.379262] smd_channel_probe_now: allocation table not initialized
<3>[    0.380658] smd_channel_probe_now: allocation table not initialized
<6>[    0.388533] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
<4>[    0.395953] __of_mpm_init(): MPM driver mapping exists
<6>[    0.403638] console [pstore-1] enabled
<6>[    0.403656] ramoops: attached 0x100000@0xdfe00000, ecc: 0/0
<4>[    0.404582] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
<6>[    0.404603] msm_rpm_dev_probe: APSS-RPM communication over SMD
<6>[    0.405476] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.406213] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.406937] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.407866] 8916_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.408569] 8916_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.409262] 8916_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.410286] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle 
<6>[    0.411224] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle 
<6>[    0.412178] 8916_l1: 1225 mV normal idle 
<6>[    0.413117] 8916_l2: 1200 mV normal idle 
<6>[    0.414074] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle 
<6>[    0.414756] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.415468] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.416390] 8916_l4: 2050 mV normal idle 
<6>[    0.417351] 8916_l5: 1800 mV normal idle 
<6>[    0.418280] 8916_l6: 1800 mV normal idle 
<6>[    0.419231] 8916_l7: 1800 mV normal idle 
<6>[    0.419894] 8916_l7_ao: 1800 mV normal idle 
<6>[    0.420914] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
<6>[    0.421845] 8916_l9: 3300 mV normal idle 
<6>[    0.422815] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle 
<6>[    0.423754] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
<6>[    0.424728] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
<6>[    0.425657] 8916_l13: 3075 mV normal idle 
<6>[    0.426618] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle 
<6>[    0.427542] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle 
<6>[    0.428511] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle 
<6>[    0.429437] 8916_l17: 2850 mV normal idle 
<6>[    0.430453] 8916_l18: 2700 mV normal idle 
<6>[    0.431367] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
<6>[    0.431406] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
<6>[    0.431428] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
<6>[    0.431461] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
<6>[    0.431495] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<3>[    0.431969] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.431990] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.432013] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.432030] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<6>[    0.432046] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
<3>[    0.432085] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
<3>[    0.433750] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.433771] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.433793] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.433810] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    0.433832] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.433849] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.433870] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.433887] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<6>[    0.441325] qcom,rpmcc-8936 1874000.qcom,rpmcc: Registered RPM clocks.
<6>[    0.457735] qcom,gcc-spm-8936 b111200.qcom,spm: Registered GCC SPM clocks
<6>[    0.457776] qcom,gcc-8936 1800000.qcom,gcc: Registered GCC clocks
<6>[    0.458238] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.458334] cpr_read_fuse_revision: apc_corner: fuse revision = 3
<6>[    0.458363] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68309829068b3ba8, speed_bits = 2
<6>[    0.458389] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
<6>[    0.458557] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1037500 -> 1057500 uV
<6>[    0.458592] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1057500 1237500] uV
<6>[    0.458613] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
<6>[    0.458633] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
<6>[    0.459764] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
<6>[    0.460372] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.460469] cpr_read_fuse_revision: apc_corner: fuse revision = 3
<6>[    0.460497] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68309829068b3ba8, speed_bits = 2
<6>[    0.460524] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
<6>[    0.460696] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1037500 -> 1057500 uV
<6>[    0.460730] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1057500 1237500] uV
<6>[    0.460752] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
<6>[    0.460772] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
<6>[    0.534839] KPI: Bootloader start count = 45735
<6>[    0.534862] KPI: Bootloader end count = 115761
<6>[    0.534877] KPI: Bootloader display count = 58514
<6>[    0.534890] KPI: Bootloader load kernel count = 1951
<6>[    0.534905] KPI: Kernel MPM timestamp = 141220
<6>[    0.534919] KPI: Kernel MPM Clock frequency = 32768
<6>[    0.534957] socinfo_print: v0.8, id=239, ver=3.0, raw_id=2315, raw_ver=1, hw_plat=11, hw_plat_ver=65536
<6>[    0.534957]  accessory_chip=0, hw_plat_subtype=12, pmic_model=65547, pmic_die_revision=131072
<6>[    0.536145] spk_vreg: no parameters
<6>[    0.537094] vgaarb: loaded
<5>[    0.538356] SCSI subsystem initialized
<6>[    0.539437] usbcore: registered new interface driver usbfs
<6>[    0.539515] usbcore: registered new interface driver hub
<6>[    0.539787] usbcore: registered new device driver usb
<6>[    0.541466] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
<3>[    0.541683] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
<6>[    0.541707] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<6>[    0.543357] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
<3>[    0.543553] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
<6>[    0.543576] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<6>[    0.546125] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
<3>[    0.546318] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
<6>[    0.546340] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<3>[    0.547637] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
<3>[    0.547899] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
<3>[    0.560369] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
<3>[    0.590313] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
<3>[    0.630301] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x0d1343c8 OPER:0x00000010
<3>[    0.680314] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
<3>[    0.680364] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.680387] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.680411] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.680428] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    0.680450] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.680468] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.680488] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.680505] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    0.740305] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
<3>[    0.740362] Failed reading reg=3 rc=-107
<3>[    0.740386] ncp6335d-regulator 4-001c: Unable to identify NCP6335D, rc(-107)
<4>[    0.740505] ncp6335d-regulator: probe of 4-001c failed with error -107
<6>[    0.741664] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
<3>[    0.741870] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
<6>[    0.741893] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<6>[    0.743705] media: Linux media interface: v0.10
<6>[    0.743813] Linux video capture interface: v2.00
<6>[    0.743939] EDAC MC: Ver: 3.0.0
<4>[    0.745469] msm-cpufreq soc:qcom,msm-cpufreq: probe deferral not supported
<6>[    0.746781] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
<6>[    0.747392] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
<6>[    0.747970] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
<6>[    0.748544] platform soc:qcom,ion:qcom,ion-heap@23: assigned reserved memory node peripheral_region@0
<6>[    0.749129] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0
<6>[    0.749726] ION heap system created
<6>[    0.749996] ION heap mm created at 0x00000000f9000000 with size 7000000
<6>[    0.750074] ION heap qsecom created at 0x00000000f8000000 with size 1000000
<6>[    0.750108] ION heap audio created at 0x00000000f7c00000 with size 400000
<6>[    0.750138] ION heap pil_1 created at 0x000000008bd00000 with size 600000
<6>[    0.750166] ION heap pil_2 created at 0x0000000086800000 with size 5500000
<3>[    0.751168] msm_bus_fabric_init_driver
<6>[    0.773343] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
<6>[    0.773388] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[    0.773790] input: qpnp_pon as /devices/virtual/input/input0
<6>[    0.774782] PMIC@SID0: PM8916 v2.0 options: 0, 0, 0, 0
<6>[    0.775405] gdsc_venus: no parameters
<6>[    0.776012] gdsc_mdss: no parameters
<6>[    0.776558] gdsc_jpeg: no parameters
<6>[    0.777580] gdsc_vfe: no parameters
<6>[    0.778238] gdsc_oxili_gx: no parameters
<6>[    0.778740] gdsc_venus_core0: fast normal 
<6>[    0.779216] gdsc_venus_core1: fast normal 
<6>[    0.780824] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
<4>[    0.780872] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<4>[    0.780905] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
<6>[    0.781922] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
<6>[    0.784951] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000e20000, with 1 ctx banks
<6>[    0.786123] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001480000, with 20 ctx banks
<6>[    0.798420] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
<6>[    0.798783] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
<6>[    0.799124] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
<6>[    0.799471] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
<6>[    0.799828] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
<6>[    0.800282] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
<6>[    0.800625] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
<6>[    0.800972] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
<6>[    0.801318] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
<6>[    0.801635] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
<6>[    0.801947] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
<6>[    0.802268] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
<6>[    0.802587] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
<6>[    0.802900] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
<6>[    0.803231] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
<6>[    0.803574] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
<6>[    0.803917] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
<6>[    0.804264] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
<6>[    0.804613] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
<6>[    0.804964] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
<6>[    0.805309] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
<6>[    0.812522] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.813506] Bluetooth: ffffffc04c387d20
<6>[    0.813569] NET: Registered protocol family 31
<6>[    0.813587] Bluetooth: ffffffc04c387d20
<6>[    0.813610] Bluetooth: ffffffc04c387d00Bluetooth: ffffffc04c387cd0
<6>[    0.813685] Bluetooth: ffffffc04c387ce0<6>[    0.814303] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.814349] cfg80211: World regulatory domain updated:
<6>[    0.814364] cfg80211:  DFS Master region: unset
<6>[    0.814377] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
<6>[    0.814402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814423] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814443] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814462] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814482] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814501] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814520] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
<6>[    0.814540] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
<6>[    0.815254] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
<6>[    0.815803] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.815898] cpr_read_fuse_revision: apc_corner: fuse revision = 3
<6>[    0.815927] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68309829068b3ba8, speed_bits = 2
<6>[    0.815954] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
<6>[    0.816120] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1037500 -> 1057500 uV
<6>[    0.816154] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1057500 1237500] uV
<6>[    0.816175] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
<6>[    0.816195] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
<6>[    0.817934] Switched to clocksource arch_sys_counter
<4>[    0.824116] msm_pm_clk_init: Could not get l2_clk (--517)
<6>[    0.825402] NET: Registered protocol family 2
<6>[    0.826568] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.827344] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
<6>[    0.828763] TCP: Hash tables configured (established 32768 bind 32768)
<6>[    0.828865] TCP: reno registered
<6>[    0.828892] UDP hash table entries: 2048 (order: 4, 65536 bytes)
<6>[    0.829129] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
<6>[    0.829671] NET: Registered protocol family 1
<7>[    0.829749] PCI: CLS 0 bytes, default 64
<6>[    0.830110] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
<6>[    0.830792] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
<6>[    0.830888] cpr_read_fuse_revision: apc_corner: fuse revision = 3
<6>[    0.830917] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68309829068b3ba8, speed_bits = 2
<6>[    0.830943] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
<6>[    0.831111] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1037500 -> 1057500 uV
<6>[    0.831145] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1057500 1237500] uV
<6>[    0.831167] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
<6>[    0.831187] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
<6>[    0.832535] gcc-mdss-8936 soc:qcom,gcc-mdss@1a98300: Registered GCC MDSS clocks.
<6>[    0.836343] Trying to unpack rootfs image as initramfs...
<3>[    0.930361] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.930389] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.930413] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.930431] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    0.930453] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.930470] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    0.930490] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    0.930507] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<6>[    1.031553] Freeing initrd memory: 1808K
<6>[    1.039940] futex hash table entries: 2048 (order: 5, 131072 bytes)
<6>[    1.040253] audit: initializing netlink subsys (disabled)
<5>[    1.040337] audit: type=2000 audit(1.039:1): initialized
<4>[    1.041220] vmscan: error setting kswapd cpu affinity mask
<5>[    1.050939] VFS: Disk quotas dquot_6.5.2
<4>[    1.051224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    1.053637] Registering sdcardfs 0.1
<6>[    1.054171] fuse init (API version 7.23)
<7>[    1.054730] SELinux:  Registering netfilter hooks
<6>[    1.058980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[    1.059010] io scheduler noop registered
<6>[    1.059034] io scheduler deadline registered
<6>[    1.059403] io scheduler cfq registered (default)
<6>[    1.059429] io scheduler test-iosched registered
<3>[    1.067166] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
<3>[    1.067200] mdss_mdp_probe+0x254/0x10cc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
<3>[    1.067931] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
<3>[    1.069125] No change in context(0==0), skip
<6>[    1.069884] mdss_mdp_pipe_addr_setup: type:0 ftchid:1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
<6>[    1.069949] mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:1 num:3 rect:0 ndx:0x8 prio:1
<6>[    1.069971] mdss_mdp_pipe_addr_setup: type:1 ftchid:8 xinid:5 num:4 rect:0 ndx:0x10 prio:2
<6>[    1.070072] mdss_mdp_pipe_addr_setup: type:2 ftchid:4 xinid:2 num:6 rect:0 ndx:0x40 prio:3
<3>[    1.070114] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
<3>[    1.070493] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
<6>[    1.071514] xlog_status: enable:0, panic:1, dump:2
<4>[    1.071701] mdss_debug_register_dump_range: No xlog range dump found, continue
<3>[    1.071879] /soc/qcom,mdss_mdp@1a00000/qcom,smmu_mdp_unsec_cb: could not get #iommu-cells for /soc/qcom,iommu@1e00000
<3>[    1.072357] /soc/qcom,mdss_mdp@1a00000/qcom,smmu_mdp_sec_cb: could not get #iommu-cells for /soc/qcom,iommu@1e00000
<6>[    1.072977] mdss_mdp_probe: mdss version = 0x10080000, bootloader display is on, num 1, intf_sel=0x00000100
<3>[    1.078114] mdss_smmu_probe: iommu create mapping failed for domain[0]
<4>[    1.078236] mdss_smmu: probe of 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb failed with error -12
<3>[    1.078637] mdss_smmu_probe: iommu create mapping failed for domain[2]
<4>[    1.078743] mdss_smmu: probe of 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb failed with error -12
<4>[    1.080079] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<4>[    1.080120] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<4>[    1.080155] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
<6>[    1.081853] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    1.082547] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ams497_720p_video:1:none panel_name:qcom,mdss_dsi_ams497_720p_video
<6>[    1.082592] mdss_dsi_panel_init: Panel Name = ams497_720p_video
<6>[    1.082986] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ams497_720p_video" (ffffffc04c387360)
<3>[    1.083039] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
<3>[    1.083066] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
<4>[    1.083081] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
<3>[    1.083358] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
<3>[    1.083383] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
<6>[    1.083448] mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    1.083470] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
<6>[    1.083492] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
<3>[    1.083554] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
<3>[    1.083578] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
<3>[    1.083648] no supply entry present: qcom,panel-supply-entries
<3>[    1.083702] mdss_dsi_parse_ctrl_params:4072 Unable to read qcom,display-id, data=0000000000000000,len=45
<3>[    1.083726] mdss_dsi_parse_gpio_params:4108, TE gpio not specified
<6>[    1.083743] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
<6>[    1.083898] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff80005e4780 phy_regulator_size=30
<6>[    1.083920] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80005ba000 ctrl_size=25c phy_base=ffffff80005e2500 phy_size=280
<6>[    1.084158] dsi_panel_device_register: Continuous splash enabled
<6>[    1.084460] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi_ctrl0
<6>[    1.106190] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10030001, PHY rev:0x1
<6>[    1.107325] mdss_dsi_status_init: DSI status check interval:5000
<6>[    1.107929] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
<6>[    1.110185] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
<6>[    1.111481] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
<6>[    1.112528] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
<6>[    1.112779] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
<3>[    1.112998] mdss_mdp_splash_parse_dt: splash mem child node is not present
<3>[    1.115302] glink_loopback_server_init: unable to create log context
<3>[    1.115786] msm_smp2p_init: unable to create log context
<3>[    1.118260] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
<3>[    1.118278] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[    1.118775] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
<6>[    1.126460] In memshare_probe, Memshare probe success
<5>[    1.132173] msm_rpm_log_probe: OK
<6>[    1.135224] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
<4>[    1.139672] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
<6>[    1.142716] msm_serial_hs module loaded
<6>[    1.143330] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
<3>[    1.143482] AXI: get_pdata(): Error: Client name not found
<3>[    1.143499] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
<3>[    1.143513] msm_serial_hsl_probe: Bus scaling is disabled
<6>[    1.143699] 78b0000.serial: ttyHSL0 at MMIO 0x78b0000 (irq = 30, base_baud = 460800) is a MSM
<6>[    1.143769] msm_hsl_console_setup: console setup on port #0
<3>[    1.190094] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.190104] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.190117] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.190134] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.190146] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.190153] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.190164] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.190172] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.440342] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.440351] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.440362] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.440370] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.440381] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.440389] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.440400] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.440407] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.690336] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.690345] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.690356] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.690364] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.690375] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.690382] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.690393] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.690400] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.940335] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.940344] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.940361] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.940368] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    1.940380] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.940387] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    1.940398] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    1.940405] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.190333] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.190341] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.190353] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.190360] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.190372] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.190379] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.190390] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.190397] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.440333] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.440341] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.440353] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.440360] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.440371] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.440378] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.440390] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.440397] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.690334] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.690342] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.690354] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.690361] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.690373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.690380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.690391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.690398] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.940332] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.940341] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.940353] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.940360] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    2.940371] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.940379] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    2.940390] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    2.940397] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.190335] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.190343] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.190355] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.190362] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.190373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.190380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.190391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.190398] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.440335] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.440343] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.440354] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.440361] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.440373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.440380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.440391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.440398] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.690335] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.690343] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.690354] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.690362] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.690373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.690380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.690391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.690399] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.940333] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.940341] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.940352] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.940360] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    3.940371] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.940379] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    3.940389] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    3.940397] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.190335] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.190343] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.190355] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.190362] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.190373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.190381] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.190391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.190399] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.440336] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.440344] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.440355] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.440362] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.440374] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.440381] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.440392] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.440399] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.690334] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.690342] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.690354] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.690361] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.690373] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.690380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.690391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.690398] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.940333] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.940342] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.940353] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.940361] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    4.940372] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.940380] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    4.940391] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    4.940398] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    5.190336] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    5.190344] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    5.190356] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    5.190363] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<3>[    5.190375] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    5.190382] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    5.190393] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    5.190400] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<6>[    5.435537] console [ttyHSL0] enabled
<3>[    5.440346] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
<6>[    5.440394] msm_serial_hsl_init: driver initialized
<3>[    5.449603] smd_tty_log_init: Unable to create IPC log
<3>[    5.449604] diag: Failed to create IPC logging context
<3>[    5.461326] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
<3>[    5.469572] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
<3>[    5.472646] (NULL device *): devfreq_add_device: Invalid parameters.
<3>[    5.482765] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
<6>[    5.486543] brd: module loaded
<6>[    5.491160] loop: module loaded
<6>[    5.491863] zram: Created 1 device(s) ...
<6>[    5.492459] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
<4>[    5.492531] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
<6>[    5.492531] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
<4>[    5.492540] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
<4>[    5.496581] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
<4>[    5.496581] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
<4>[    5.497801] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    5.497806] i2c-core: driver [tabla-i2c-core] using legacy resume method
<4>[    5.498009] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
<4>[    5.498014] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
<4>[    5.498225] i2c-core: driver [tasha-i2c-core] using legacy suspend method
<4>[    5.498229] i2c-core: driver [tasha-i2c-core] using legacy resume method
<6>[    5.499600] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
<6>[    5.500983] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
<6>[    5.501006] qce 720000.qcedev: CE device = 0x0
<6>[    5.501006] IO base, CE = 0xffffff80013c0000
<6>[    5.501006] Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[    5.501006] IO base BAM = 0x0000000000000000
<6>[    5.501006] BAM IRQ 26
<6>[    5.501006] Engines Availability = 0x2010853
<3>[    5.501070] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000704000
<3>[    5.501078] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000704000
<3>[    5.501087] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000704000
<3>[    5.501095] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000704000
<3>[    5.501102] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000704000
<6>[    5.501477] sps:BAM 0x0000000000704000 is registered.
<6>[    5.501478] sps:BAM 0x0000000000704000 (va:0xffffff8001600000) enabled: ver:0x25, number of pipes:8
<6>[    5.501973] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 26
<6>[    5.507045] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
<6>[    5.508423] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
<6>[    5.508445] qcrypto 720000.qcrypto: CE device = 0x0
<6>[    5.508445] IO base, CE = 0xffffff8001640000
<6>[    5.508445] Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
<6>[    5.508445] IO base BAM = 0x0000000000000000
<6>[    5.508445] BAM IRQ 26
<6>[    5.508445] Engines Availability = 0x2010853
<6>[    5.509174] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 26
<6>[    5.512793] qcrypto 720000.qcrypto: qcrypto-ecb-aes
<6>[    5.513042] qcrypto 720000.qcrypto: qcrypto-cbc-aes
<6>[    5.513232] qcrypto 720000.qcrypto: qcrypto-ctr-aes
<6>[    5.513436] qcrypto 720000.qcrypto: qcrypto-ecb-des
<6>[    5.513619] qcrypto 720000.qcrypto: qcrypto-cbc-des
<6>[    5.513782] qcrypto 720000.qcrypto: qcrypto-ecb-3des
<6>[    5.513944] qcrypto 720000.qcrypto: qcrypto-cbc-3des
<6>[    5.514113] qcrypto 720000.qcrypto: qcrypto-xts-aes
<6>[    5.514281] qcrypto 720000.qcrypto: qcrypto-sha1
<6>[    5.514444] qcrypto 720000.qcrypto: qcrypto-sha256
<6>[    5.514606] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
<6>[    5.514774] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
<6>[    5.514938] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
<6>[    5.515100] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
<6>[    5.515262] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
<6>[    5.515426] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
<6>[    5.515588] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
<6>[    5.515752] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
<6>[    5.515920] qcrypto 720000.qcrypto: qcrypto-aes-ccm
<6>[    5.516086] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
<6>[    5.520790] SCSI Media Changer driver v0.25 
<3>[    5.523338] msm8939-pinctrl 1000000.pinctrl: invalid group "gpio10" for function "blsp_spi1_cs1"
<6>[    5.525033] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[    5.528749] tun: Universal TUN/TAP device driver, 1.6
<6>[    5.528753] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    5.528920] PPP generic driver version 2.4.2
<6>[    5.529127] PPP BSD Compression module registered
<6>[    5.529146] PPP Deflate Compression module registered
<6>[    5.529190] PPP MPPE Compression module registered
<6>[    5.529225] NET: Registered protocol family 24
<6>[    5.531157] wcnss_wlan probed in built-in mode
<6>[    5.540433] msm_sharedmem: sharedmem_register_qmi: qmi init successful
<3>[    5.540813] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
<6>[    5.540821] hyp_assign_table: Failed to assign memory protection, ret = -5
<3>[    5.540834] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x0000000086700000 size=1441792 err=-5
<6>[    5.541084] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
<6>[    5.541340] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
<6>[    5.541594] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
<6>[    5.543083] msm_otg 78d9000.usb: msm_otg probe
<6>[    5.547695] msm_otg 78d9000.usb: OTG regs = ffffff8000a6c000
<6>[    5.551705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    5.551717] ehci-pci: EHCI PCI platform driver
<6>[    5.551789] ehci-msm: Qualcomm On-Chip EHCI Host Controller
<3>[    5.552965] Unable to get vbus_otg
<3>[    5.552979] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
<6>[    5.553137] usbcore: registered new interface driver usb-storage
<6>[    5.553209] usbcore: registered new interface driver usb_ehset_test
<6>[    5.554839] gbridge_init: gbridge_init successs.
<6>[    5.556620] mousedev: PS/2 mouse device common for all mice
<6>[    5.556971] usbcore: registered new interface driver xpad
<6>[    5.558125] input: MELFAS_MMS449_Touchscreen as /devices/soc/78ba000.i2c/i2c-6/6-0048/input/input1
<3>[    5.580773] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
<6>[    5.582747] mip4_ts 6-0048: mip_init_config - F/W Version : 01.38 01.66 01.09 01.09
<6>[    5.606351] mip4_ts 6-0048: mip4_ts - Enabled
<6>[    5.606723] mip4_ts 6-0048: MELFAS MMS449 Touchscreen is initialized successfully.
<4>[    5.608319] i2c-core: driver [smi130_acc] using legacy suspend method
<4>[    5.608324] i2c-core: driver [smi130_acc] using legacy resume method
<4>[    5.608422] i2c-core: driver [smi130_gyro] using legacy suspend method
<4>[    5.608426] i2c-core: driver [smi130_gyro] using legacy resume method
<6>[    5.609089] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
<6>[    5.609291] i2c /dev entries driver
<6>[    5.613624] msm_vidc:  err: Failed to read firmware name: -22
<6>[    5.613631] msm_vidc:  err: Failed to get platform resources
<6>[    5.613635] msm_vidc:  err: Failed to init core
<4>[    5.613663] msm_vidc_v4l2: probe of 1d00000.qcom,vidc failed with error -22
<3>[    5.616908] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)