Maxis VoIP on Huawei ONU

maxis-voip.txt

_________________
WAN Configuration
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Enable WAN:                     ✔
Encapsulation mode:             IPoE
Protocol type:                  IPv4
WAN mode:                       Routed WAN
Service type:                   VoIP
Enable VLAN:                    ✔
VLAN ID:                        822
802.1p policy:                  Use specified value
802.1p:                         6
MTU:                            1500
IP acquisition mode:            DHCP
Vendor ID:                      « ʙʟᴀɴᴋ »
________________________
VoIP Basic Configuration
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Outbound Proxy Address:         homegw01.maxis.com.my
Outbound Proxy Port:            5060
Standby Outbound Address:       « ʙʟᴀɴᴋ »
Standby Outbound Proxy Port:    5060

Primary Proxy Address:          homegw01.maxis.com.my
Primary Proxy Port:             5060
Standby Proxy Address:          « ʙʟᴀɴᴋ »
Standby Proxy Port:             5060

Home Domain:                    homesip.maxis.com.my
Local Port:                     5060
Digitmap:                       15xxx|[2-9]xxxxxxxx|0[2-9]xxxxxxxxx|00xxxxxxxxxxxxx|118xx|1[2-9]x|110|111|112|113|114|115|116|117|119|10xx[2-9]xxxxxx|10xx118xx|10xx1[2-9]x|10xx110|10xx111|10xx112|10xx113|10xx114|10xx115|10xx116|10xx117|10xx119|1x00xxxxxx|E|F
Digitmap Match Mode:            Min
Registration Period:            900
Signaling Port:                 2_VOIP_R_VID_822
Media Port:                     « ʙʟᴀɴᴋ »
Region:                         Malaysia
_____________________
User Basic Parameters
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Enable User:                    ✔
URI:                            sip:«Telphone Number»@:5060
Register User Name:             «Telphone Number»
Associated POTS:                1
Auth User Name:                 «Telphone Number»
Password:                       (ID + last 4 digit tel)

Hi Anime4000,

According to this tutorial: https://forum.lowyat.net/topic/5243640

Will the voip work if I plug the Yealink IP Phone in the Maxis router LAN port? Or the Yealink IP Phone work at the ONU WAN port only?

Hi Anime4000,

According to this tutorial: https://forum.lowyat.net/topic/5243640

Will the voip work if I plug the Yealink IP Phone in the Maxis router LAN port? Or the Yealink IP Phone work at the ONU WAN port only?

VoIP works on VLAN, You need find a way to pull out VoIP VLAN, maybe using VLAN aware switch:
ONU > Switch > Router & Yealink

Thank you, so happy to get your reply.

Will it work if I do this?

Maxis modem > Maxis router > Yealink (plug into Maxis router's LAN port)

You can try VoIP over normal internet, some user can use VoIP without needing VLAN, if you have 4G backup, that also works

for me here, VoIP only works on VLAN 822 and 4G Backup, Normal/PPPoE Internet are not.

So, you need find a way to bridge VLAN 822 to another LAN port, for example LAN 4 (untagged), then your Yealink phone setup without VLAN since you untag at LAN 4,

Thank you, let me buy a Yealink phone to try that