gistfile1.txt

[    0.257374] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
[    0.257661] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
[    0.257796] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
[    0.258128] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[    0.258242] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x000fe00000
[    0.258299] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000
[    0.375078] qcom-pcie 1b500000.pci: iATU unroll: disabled
[    0.375113] qcom-pcie 1b500000.pci: Detected iATU regions: 8 outbound, 8 inbound
[    1.401271] qcom-pcie 1b500000.pci: Phy link never came up
[    1.401501] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    1.401532] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.401566] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xfe00000-0xfe0ffff])
[    1.401594] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    1.401692] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    1.401856] pci 0000:00:00.0: supports D1
[    1.401881] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.407400] PCI: bus0: Fast back to back transfers disabled
[    1.412592] PCI: bus1: Fast back to back transfers enabled
[    1.412701] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.413919] pcieport 0000:00:00.0: AER: enabled with IRQ 44
[    1.414984] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
[    1.415276] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
[    1.415419] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
[    1.415755] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[    1.415871] qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0031e00000
[    1.415928] qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000
[    1.536826] qcom-pcie 1b700000.pci: iATU unroll: disabled
[    1.536855] qcom-pcie 1b700000.pci: Detected iATU regions: 8 outbound, 8 inbound
[    2.559962] qcom-pcie 1b700000.pci: Phy link never came up
[    2.560155] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    2.560185] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.560216] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x31e00000-0x31e0ffff])
[    2.560244] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    2.560330] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    2.560486] pci 0001:00:00.0: supports D1
[    2.560509] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    2.565953] PCI: bus0: Fast back to back transfers disabled
[    2.571055] PCI: bus1: Fast back to back transfers enabled
[    2.571156] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    2.572300] pcieport 0001:00:00.0: AER: enabled with IRQ 46