ArduinoDiscordBot

Arduino: 1.8.9 (Windows 10), Board: "Arduino/Genuino Uno"

C:\Users\BLACKS~1\AppData\Local\Temp\arduino_modified_sketch_763688\SerialDisplay.pde:4:32: warning: invalid conversion from 'int' to 't_backlightPol' [-fpermissive]

 LiquidCrystal_I2C lcd(0x27,16,2);  // set the LCD address to 0x27 for a 16 chars and 2 line display

                                ^

In file included from C:\Users\BLACKS~1\AppData\Local\Temp\arduino_modified_sketch_763688\SerialDisplay.pde:2:0:

ArduinoDiscordBot

    gameEnabled = true;
    
    digitalWrite(redLed,HIGH);
    
    delay(100);

    lcd.clear();
    lcd.print("New game");

    delay(1000);

ArduinoDiscordBot

local increment,target = 1,10

for i = increment,target do
    print(i)
end

outcome:
1
2

ArduinoDiscordBot

for int counter = 0; counter < 10000; counter++) {
  switch (counter) {
    case <10:
  }
  digitalWrite(pinDArray[digit], LOW);
    for (int num = 0; num < 10; num++) {
      switch (num) {
         case 0:
            for (int i = 0; i < pinCount; i++) {
                digitalWrite(pinArray[i], segArray0[i]);

ArduinoDiscordBot

    64:1 (63.68395:1) gearing
    Solarbotics Tested
    Torque @5V:
        FULL Step mode: 821gmf*cm (11.4in*oz) @ 200mA draw
        HALF Step mode: 598gmf*cm (8.3in*oz) @ 256mA draw
    2038 steps per revolution
    4-phase unipolar stepper wiring through 23cm (9") long cable to 5-pin connector (0.1" pitch)
    5V nominal voltage
    ~35 ohms coil resistance

ArduinoDiscordBot

// LCD Start
#include <LiquidCrystal.h>

const byte rs = 12,
           en = 11,
           d4 = 5,
           d5 = 4,
           d6 = 6,
           d7 = 7;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

ArduinoDiscordBot

  if(teller<=9){
  digitalWrite(REDLED,LOW);
  digitalWrite(GREENLED,LOW);
  digitalWrite(BLUELED,LOW);
  lcd.clear();
  lcd.setCursor(0,0);
  lcd.print("Now enter the");
  lcd.setCursor(0,1);
  lcd.print("same combination!");

ArduinoDiscordBot

    
  buttonState = digitalRead(buttonPin);
  if (buttonState != lastButtonState) {
    if (buttonState == HIGH) {
  
  redValue = random(0,255);
  greenValue = random(0,255);
  blueValue = random(0,255);

  analogWrite(RED, redValue);

ArduinoDiscordBot

#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
 #include <avr/power.h>
#endif

#define PIN        3 
#define NUMPIXELS 22

Adafruit_NeoPixel strip(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);

ArduinoDiscordBot

#include <Adafruit_FONA.h>


#include <SoftwareSerial.h>
SoftwareSerial SIM5320(10,11);



void setup() {
  Serial.begin(4800);