Here my problem, when i try to do:
sudo scp minion.p* me@192.168.56.1:~/saltvms
like in the tutorial, i've this issue (but tried with a empty file)
vagrant@master:~$ sudo scp filetext axxon@192.168.56.1:~/
ssh: connect to host 192.168.56.1 port 22: Connection refused
lost connection
Here in the master server:
vagrant@master:~$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:d5:ac:89
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fed5:ac89/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5778 errors:0 dropped:0 overruns:0 frame:0
TX packets:3159 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3242049 (3.2 MB) TX bytes:253567 (253.5 KB)
eth1 Link encap:Ethernet HWaddr 08:00:27:f4:8c:49
inet addr:192.168.56.102 Bcast:192.168.56.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fef4:8c49/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6494 (6.4 KB) TX bytes:7468 (7.4 KB)
eth2 Link encap:Ethernet HWaddr 08:00:27:61:d5:ba
inet addr:192.168.1.55 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe61:d5ba/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3674 (3.6 KB) TX bytes:1852 (1.8 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:30 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2280 (2.2 KB) TX bytes:2280 (2.2 KB)
and in my host machine:
axxon@debian:~/.ssh$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 50:46:5d:31:b1:59
inet adr:192.168.1.78 Bcast:192.168.1.255 Masque:255.255.255.0
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
vboxnet0 Link encap:Ethernet HWaddr
inet adr:192.168.56.1 Bcast:192.168.56.255 Masque:255.255.255.0
vmnet1 Link encap:Ethernet HWaddr
inet adr:192.168.156.1 Bcast:192.168.156.255 Masque:255.255.255.0
wlan0 Link encap:Ethernet HWaddr
inet adr:192.168.1.63 Bcast:192.168.1.255 Masque:255.255.255.0
Here my HostOnly details:
axxon@debian:~/Projets/virtual/saltvmx3$ VBoxManage list hostonlyifs
Name: vboxnet0
GUID: 786f6276-656e-4074-8000-0a0027000000
DHCP: Disabled
IPAddress: 192.168.56.1
NetworkMask: 255.255.255.0
IPV6Address: fe80:0000:0000:0000:0800:27ff:fe00:0000
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: ***
MediumType: Ethernet
Status: Up
VBoxNetworkName: HostInterfaceNetworking-vboxnet0
And finaly my bridges
axxon@debian:~/Projets/virtual/saltvmx3$ VBoxManage list bridgedifs
Name: eth0
GUID: 30687465-0000-4000-8000-50465d31b159
DHCP: Disabled
IPAddress: 192.168.1.78
NetworkMask: 255.255.255.0
IPV6Address: fe80:0000:0000:0000:5246:5dff:fe31:b159
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 50:46:5d:31:b1:59
MediumType: Ethernet
Status: Up
VBoxNetworkName: HostInterfaceNetworking-eth0
Name: vmnet8
GUID: 656e6d76-3874-4000-8000-005056c00008
DHCP: Disabled
IPAddress: 192.168.54.1
NetworkMask: 255.255.255.0
IPV6Address:
IPV6NetworkMaskPrefixLength: 0
HardwareAddress: 00:50:56:c0:00:08
MediumType: Ethernet
Status: Down
VBoxNetworkName: HostInterfaceNetworking-vmnet8
Name: wlan0
GUID: 6e616c77-0030-4000-8000-844bf5608ed6
DHCP: Disabled
IPAddress: 192.168.1.63
NetworkMask: 255.255.255.0
IPV6Address: fe80:0000:0000:0000:864b:f5ff:fe60:8ed6
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 84:4b:f5:60:8e:d6
MediumType: Ethernet
Status: Up
VBoxNetworkName: HostInterfaceNetworking-wlan0
Name: vmnet1
GUID: 656e6d76-3174-4000-8000-005056c00001
DHCP: Disabled
IPAddress: 192.168.156.1
NetworkMask: 255.255.255.0
IPV6Address: fe80:0000:0000:0000:0250:56ff:fec0:0001
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 00:50:56:c0:00:01
MediumType: Ethernet
Status: Up
VBoxNetworkName: HostInterfaceNetworking-vmnet1
I'm on a debian machine, and in the vagrant file i replaced:
minion.vm.network "public_network", :bridge => 'en0: Ethernet (AirPort)' by master.vm.network "public_network", :bridge => 'eth0'
In this tutorial we've got 3 adapters, a NAT, a HostOnlyAdapter and a bridged network interface. I'm studying now the meaning of there interfaces but it isn't clear for me, could you also (i'm asking a lot i know) explain me in surface what's the usage of there interfaces ?
Thanks you very much.