Skip to content

Instantly share code, notes, and snippets.

View BrendaIT's full-sized avatar

Brenda BrendaIT

4 followers · 65 following
  • Italy
View GitHub Profile
@BrendaIT
BrendaIT / README.md
Created March 31, 2025 17:24 — forked from ammmze/README.md
Script to swap mainsail source

Switch Mainsail

This script provides an easy way to switch the mainsail release to different zip.

First you must download the script.

wget -O ~/switch-mainsail.sh https://gist.githubusercontent.com/ammmze/3243dd878ccde5d0c486e3650e0daa49/raw/switch-mainsail.sh
chmod +x ~/switch-mainsail.sh
@BrendaIT
BrendaIT / readme.md
Created May 1, 2022 01:30 — forked from ChipCE/readme.md
Klipper bed mesh on print area only macro install guide

Klipper mesh on print area only install guide

What this macro do

  • This macro will dymanic change the bed_mesh area based on the size of the printed part. The fw will only probe on the area that the part will be printed (plus mesh_area_offset value)

Setup guide

  • (1) Add the following macrro to your printer config, this will replace the default BED_MESH_CALIBRATE command.