END_PRINT

gistfile1.txt

[gcode_macro END_PRINT]
gcode:
  {% set th = printer.toolhead %}
  {% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
  {% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
  {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
  SAVE_GCODE_STATE NAME=STATE_PRINT_END
  
  M400
  G92 E0
  G1 E-5.0 F1800

  TURN_OFF_HEATERS
  G90                                      ; absolute positioning
  G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
  G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
  M107                                     ; turn off fan

  RESTORE_GCODE_STATE NAME=STATE_PRINT_END