Code for the ESP32-S3-Box3

s3-box3.yaml

#------------------------------------------------------------------------------------#
#     PIN Schematics                                                                 #
#                                                                                    #
#       GPIO-00 MCU-BOOT                                                             #
#       GPIO-01 Speaker Mute-Status                                                  #
#       GPIO-02 I2S MCLK                                                             #
#       GPIO-03 Touch-Screen TT21100 Interrupt Pin                                   #
#       GPIO-04 ILI92xxx Display DC-Pin (SPI: CLK-Pin)                               #
#       GPIO-05 ILI92xxx Display CS-Pin (SPI: MOSI-Pin)                              #
#       GPIO-06 ILI92xxx Display SDA                                                 #
#       GPIO-07 ILI92xxx Display SCK                                                 #
#       GPIO-17 I2S_SCLK                                                             #
#       GPIO-40 I2C_SCL (Temp & Hum) -- SENSOR v1.1 [AHT30]                          #
#       GPIO-41 I2C_SDA (Temp & Hum) -- SENSOR v1.1 [AHT30]                          #
#       GPIO-45 I2S_LRCK
#       GPIO-46 PA_CTRL
#       GPIO-47 LCD Backlight (CTRL)
#       GPIO-48 LCD Reset-Pin

substitutions:
  device_name: "esp32-s3-box-3"
  friendly_name: ESP32 S3 Box 3
  description: ESP32 S3 Box3
  comment: "ESP32 S3 Box3"
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  wifi_hotspot_ssid: "ESP32-S3-Box-3"
  wifi_hotspot_password: !secret wifi_password
  wifi_update_interval: 3s

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  comment: ${comment}
  platformio_options:
    board_build.flash_mode: dio
  project:
    name: esphome.s3-box3
    version: "0.1"
  min_version: 2023.10.0

esp32:
  board: esp32s3box
  framework:
    type: esp-idf
#    version: latest
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"

external_components:
#  - source: github://pr#4793
#    components: [ tt21100 ]
  - source: github://pr#4861
    components: [ es8311 ]
  - source: github://rpatel3001/esphome@es7210
    components: [ es7210 ]

psram:
  mode: octal
  speed: 80MHz

ota:
  password: 
 
api:
  encryption:
    key: 

# Wifi-Settings
wifi:
  ssid: ${wifi_ssid}
  password: ${wifi_password}
  fast_connect: true

  ap:
    ssid: $(wifi_hotspot_ssid)
    password: $(wifi_hotspot_password)

bluetooth_proxy:
  active: true

logger:
  # CDC logging is currently not working on the S3
  # See https://github.com/espressif/esp-idf/commit/9924d9f27192a5fab5f66230c72249ecc6cad34c
  #hardware_uart: USB_CDC
  level: VERBOSE
  logs:
    esp32_ble: WARN
    esp32_ble_tracker: WARN
    ble_dist: WARN
    sensor: WARN
    ledc.output: WARN
    component: WARN
    ili9xxx: WARN
    tt21100: WARN
    touchscreen: WARN
    wifi: WARN
    es8311: WARN
    i2s_audio: VERBOSE
    voice_assistant: VERBOSE
    es7210: WARN

sensor:
  - platform: wifi_signal
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: internal_temperature
    name: "Internal Temperature"
    entity_category: "diagnostic"

# Needs support for AHT-30 sensors
  - platform: aht10
    temperature:
      name: "Test-Temp"
    humidity:
      name: "Test-Hum"

  - platform: uptime
    name: Uptime
    id: uptime_sensor
    entity_category: "diagnostic"
    update_interval: $wifi_update_interval
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str(); 

text_sensor:
  - platform: wifi_info
    ip_address:
      update_interval: 60s
      name: IP Address
      entity_category: "diagnostic"
    ssid:
      update_interval: 60s
      name: Connected SSID
      entity_category: "diagnostic"
    bssid:
      update_interval: 60s
      name: Connected BSSID
      entity_category: "diagnostic"
    mac_address:
      name: Mac Wifi Address
      entity_category: "diagnostic"
    scan_results:
      update_interval: 60s
      name: Latest Scan Results
      entity_category: "diagnostic"
      
  # Device Uptime Information 
  - platform: template
    name: Uptime Human Readable
    id: uptime_human
    icon: mdi:clock-start

binary_sensor:
  - platform: gpio
    name: Mute-Button
    pin: 
      number: GPIO1
      inverted: true

  - platform: homeassistant
    id: ladepunkt_aktiv
    entity_id: binary_sensor.openwb_cp1_ladepunkt_aktiv
    internal: True

  - platform: homeassistant
    id: ladestatus_auto
    entity_id: binary_sensor.openwb_cp1_autoladestatus
    internal: True
    

#remote_receiver:
#  pin:
#    number: GPIO38
#  dump: all

#remote_transmitter:
#  pin:
#    number: GPIO39
#  carrier_duty_percent: 100%

# Enable Buttons in HA UI
button:
  - platform: restart
    name: "Restart Device"
    entity_category: "diagnostic"

  - platform: shutdown
    name: "Shutdown Device"
    entity_category: "diagnostic"

time:
  - platform: homeassistant
    id: time_ha
    timezone: Europe/Berlin

output:
  - platform: ledc
    pin: GPIO47
    id: lcd_backlight_pin

light:
  - platform: monochromatic
    output: lcd_backlight_pin
    id: lcd_backlight
    name: "LCD Backlight"
    restore_mode: ALWAYS_ON

spi:
  clk_pin: GPIO7
  mosi_pin: GPIO6

i2c:
  sda: GPIO41
  scl: GPIO40
  scan: true

# does not work on the ESP32-S3-Box3
display:
  - platform: ili9xxx
    model: s3box
    cs_pin: GPIO5
    dc_pin: GPIO4
    id: lcd
    auto_clear_enabled: false
    # Width = 320, Height = 240
    lambda: |-
      auto bg = Color(250, 250, 250);
      auto text = Color(250, 250, 250);
      auto border_color = Color(60, 60, 60);
      auto button_bg_on = Color(36, 180, 245);
      auto button_bg_off = Color(158, 158, 158);
      auto red = Color(255, 0, 0);
      auto green = Color(0, 255, 0);
      auto blue = Color(0, 0, 255);

      it.image(0,0, id(background_image), ImageAlign::TOP_LEFT);
      it.strftime(160, 65, id(font_large), text, TextAlign::CENTER, "%H:%M:%S", id(time_ha).now());
      it.strftime(160, 115, id(font_medium), text, TextAlign::CENTER, "%d.%m.%Y", id(time_ha).now());

      int circleY = 187;
      int circleX1 = 53, circleX2 = 267;
      int circleRadius = 40;
      
      it.filled_circle(circleX1, circleY, circleRadius+2, text);
      it.filled_circle(circleX2, circleY, circleRadius+2, text);

      if (id(ladepunkt_aktiv).state){
        it.filled_circle(circleX1, circleY, circleRadius, button_bg_on);
        it.image(circleX1, circleY, id(station_status_icon), ImageAlign::CENTER);
      }
      else{
        it.filled_circle(circleX1, circleY, circleRadius, button_bg_off);
        it.image(circleX1, circleY, id(station_status_icon), ImageAlign::CENTER);
      }
      if (id(ladestatus_auto).state){
        it.filled_circle(circleX2, circleY, circleRadius, button_bg_on);
        it.image(circleX2, circleY, id(charger_status_icon), ImageAlign::CENTER);
      }
      else{
        it.filled_circle(circleX2, circleY, circleRadius, button_bg_off);
        it.image(circleX2, circleY, id(charger_status_icon), ImageAlign::CENTER);
      }

font:
  - file: "gfonts://Roboto@500"
    id: font_large
    size: 70
    glyphs: "0123456789:APM."
  - file: "gfonts://Roboto@500"
    id: font_medium
    size: 30
  - file: "gfonts://Roboto@500"
    id: font_small
    size: 15

image:
  - file: mdi:volume-off
    id: mute_icon
    resize: 40x40
  - file: mdi:microphone-off
    id: mic_mute_icon
    resize: 40x40
  - file: mdi:account-voice
    id: voice_icon
    resize: 40x40
  - file: mdi:ev-plug-type2
    id: charger_status_icon
    resize: 40x40
  - file: mdi:ev-station
    id: station_status_icon
    resize: 40x40
  - file: "images/background_spots_lines_85563_320x240.jpg"
    id: background_image
    resize: 320x240
    type: rgba

#touchscreen:
#  - platform: tt21100
#    address: 0x24
#    interrupt_pin: GPIO3 # strapping CTP_INT