Skip to content

Instantly share code, notes, and snippets.

@CyberShadow
Last active September 22, 2018 20:06
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save CyberShadow/be18a7a55cdbc2fc9819a89e6dfc21ab to your computer and use it in GitHub Desktop.
Save CyberShadow/be18a7a55cdbc2fc9819a89e6dfc21ab to your computer and use it in GitHub Desktop.
OpenWRT logs
[ 0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 Thu Aug 16 07:51:15 2018
[ 0.000000] MyLoader: sysp=b3a3d853, boardp=492118fc, parts=f35d1cdf
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 80442044, node_mem_map 81000020
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=TL-WDR4300 console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124996K/131072K available (3363K kernel code, 172K rwdata, 444K rodata, 300K init, 219K bss, 6076K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008316] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.081145] pid_max: default: 32768 minimum: 301
[ 0.086173] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093228] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.103415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.113907] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.121607] NET: Registered protocol family 16
[ 0.127843] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
[ 0.136944] registering PCI controller with io_map_base unset
[ 0.380938] Can't analyze schedule() prologue at 803a5594
[ 0.397346] PCI host bridge to bus 0000:00
[ 0.401721] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.409076] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.415001] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.422238] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.430697] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[ 0.430709] pci 0000:00:00.0: invalid calibration data
[ 0.436219] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[ 0.436273] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.436349] pci 0000:00:00.0: supports D1
[ 0.436360] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.436594] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.436623] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 0.444420] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 0.452146] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.460605] clocksource: Switched to clocksource MIPS
[ 0.467099] NET: Registered protocol family 2
[ 0.472714] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.480143] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.486964] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.493825] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.500051] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.507005] NET: Registered protocol family 1
[ 0.511724] PCI: CLS 0 bytes, default 32
[ 0.514469] Crashlog allocated RAM at address 0x3f00000
[ 0.521117] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.535514] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.541756] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.561508] io scheduler noop registered
[ 0.565683] io scheduler deadline registered (default)
[ 0.571626] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.581162] console [ttyS0] disabled
[ 0.605037] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.614231] console [ttyS0] enabled
[ 0.621651] bootconsole [early0] disabled
[ 0.636053] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.653622] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.658775] 5 tp-link partitions found on MTD device spi0.0
[ 0.664464] Creating 5 MTD partitions on "spi0.0":
[ 0.669328] 0x000000000000-0x000000020000 : "u-boot"
[ 0.676250] 0x000000020000-0x00000016df44 : "kernel"
[ 0.683316] 0x00000016df44-0x0000007f0000 : "rootfs"
[ 0.689919] mtd: device 2 (rootfs) set to be root filesystem
[ 0.695747] 1 squashfs-split partitions found on MTD device rootfs
[ 0.702035] 0x0000003b0000-0x0000007f0000 : "rootfs_data"
[ 0.709616] 0x0000007f0000-0x000000800000 : "art"
[ 0.716477] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.724753] libphy: Fixed MDIO Bus: probed
[ 0.740882] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
[ 1.412807] libphy: ag71xx_mdio: probed
[ 2.042001] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
[ 2.053523] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 2.061700] NET: Registered protocol family 10
[ 2.070018] NET: Registered protocol family 17
[ 2.074645] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.087902] 8021q: 802.1Q VLAN Support v1.8
[ 2.093979] hctosys: unable to open rtc device (rtc0)
[ 2.104266] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.112828] Freeing unused kernel memory: 300K
[ 2.117340] This architecture does not have kernel memory protection.
[ 2.560620] random: fast init done
[ 2.819649] init: Console is alive
[ 2.823379] init: - watchdog -
[ 3.789168] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.857975] usbcore: registered new interface driver usbfs
[ 3.863685] usbcore: registered new interface driver hub
[ 3.869170] usbcore: registered new device driver usb
[ 3.879425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.887658] ehci-platform: EHCI generic platform driver
[ 3.893113] ehci-platform ehci-platform: EHCI Host Controller
[ 3.898995] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 3.909134] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 3.940646] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 3.947942] hub 1-0:1.0: USB hub found
[ 3.952125] hub 1-0:1.0: 1 port detected
[ 3.956944] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.974731] init: - preinit -
[ 4.560671] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 4.803574] random: procd: uninitialized urandom read (4 bytes read)
[ 4.810798] hub 1-1:1.0: USB hub found
[ 4.816822] hub 1-1:1.0: 4 ports detected
[ 4.825224] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.871857] eth0: link up (1000Mbps/Full duplex)
[ 5.876628] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.000950] jffs2: notice: (439) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.018016] mount_root: switching to jffs2 overlay
[ 8.051942] urandom-seed: Seeding with /etc/urandom.seed
[ 8.255353] eth0: link down
[ 8.269635] procd: - early -
[ 8.273396] procd: - watchdog -
[ 8.906253] procd: - watchdog -
[ 8.909728] procd: - ubus -
[ 9.018832] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.027896] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.034899] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.042563] procd: - init -
[ 9.447015] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.458273] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.476150] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 9.484327] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 9.494223] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.508552] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 9.570706] xt_time: kernel timezone is -0000
[ 9.629607] PPP generic driver version 2.4.2
[ 9.636511] NET: Registered protocol family 24
[ 9.681246] ath: EEPROM regdomain: 0x0
[ 9.681254] ath: EEPROM indicates default country code should be used
[ 9.681258] ath: doing EEPROM country->regdmn map search
[ 9.681273] ath: country maps to regdmn code: 0x3a
[ 9.681279] ath: Country alpha2 being used: US
[ 9.681282] ath: Regpair used: 0x3a
[ 9.693549] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.697443] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
[ 9.704392] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 9.715413] ath: EEPROM regdomain: 0x0
[ 9.715420] ath: EEPROM indicates default country code should be used
[ 9.715424] ath: doing EEPROM country->regdmn map search
[ 9.715439] ath: country maps to regdmn code: 0x3a
[ 9.715444] ath: Country alpha2 being used: US
[ 9.715449] ath: Regpair used: 0x3a
[ 9.725784] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 9.729695] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[ 9.867725] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 11.179796] urandom_read: 5 callbacks suppressed
[ 11.179804] random: jshn: uninitialized urandom read (4 bytes read)
[ 21.763727] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.770978] eth0: link up (1000Mbps/Full duplex)
[ 21.800686] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.813926] br-lan: port 1(eth0.1) entered blocking state
[ 21.819555] br-lan: port 1(eth0.1) entered disabled state
[ 21.825509] device eth0.1 entered promiscuous mode
[ 21.830380] device eth0 entered promiscuous mode
[ 21.895245] br-lan: port 1(eth0.1) entered blocking state
[ 21.900783] br-lan: port 1(eth0.1) entered forwarding state
[ 21.906977] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 22.253251] br-lan: port 2(eth0.2) entered blocking state
[ 22.258931] br-lan: port 2(eth0.2) entered disabled state
[ 22.264874] device eth0.2 entered promiscuous mode
[ 22.269840] br-lan: port 2(eth0.2) entered blocking state
[ 22.275363] br-lan: port 2(eth0.2) entered forwarding state
[ 22.831033] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 25.983631] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 25.995296] br-lan: port 3(wlan1) entered blocking state
[ 26.000752] br-lan: port 3(wlan1) entered disabled state
[ 26.006538] device wlan1 entered promiscuous mode
[ 26.014604] ath: EEPROM regdomain: 0x8348
[ 26.014613] ath: EEPROM indicates we should expect a country code
[ 26.014620] ath: doing EEPROM country->regdmn map search
[ 26.014628] ath: country maps to regdmn code: 0x3a
[ 26.014634] ath: Country alpha2 being used: US
[ 26.014638] ath: Regpair used: 0x3a
[ 26.014645] ath: regdomain 0x8348 dynamically updated by user
[ 26.014727] ath: EEPROM regdomain: 0x8348
[ 26.014731] ath: EEPROM indicates we should expect a country code
[ 26.014737] ath: doing EEPROM country->regdmn map search
[ 26.014744] ath: country maps to regdmn code: 0x3a
[ 26.014748] ath: Country alpha2 being used: US
[ 26.014752] ath: Regpair used: 0x3a
[ 26.014758] ath: regdomain 0x8348 dynamically updated by user
[ 26.720562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.935038] br-lan: port 4(wlan0) entered blocking state
[ 26.940889] br-lan: port 4(wlan0) entered disabled state
[ 26.946687] device wlan0 entered promiscuous mode
[ 26.952358] br-lan: port 4(wlan0) entered blocking state
[ 26.957758] br-lan: port 4(wlan0) entered forwarding state
[ 26.990729] br-lan: port 4(wlan0) entered disabled state
[ 27.340404] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 27.347089] br-lan: port 3(wlan1) entered blocking state
[ 27.352529] br-lan: port 3(wlan1) entered forwarding state
[ 27.950731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.957367] br-lan: port 4(wlan0) entered blocking state
[ 27.962828] br-lan: port 4(wlan0) entered forwarding state
[ 31.416474] random: crng init done
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 Thu Aug 16 07:51:15 2018
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=b3a3d853, boardp=492118fc, parts=f35d1cdf
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 2
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Zone ranges:
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Movable zone start for each node
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Early memory node ranges
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80442044, node_mem_map 81000020
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WDR4300 console=ttyS0,115200 rootfstype=squashfs noinitrd
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Memory: 124996K/131072K available (3363K kernel code, 172K rwdata, 444K rodata, 300K init, 219K bss, 6076K reserved, 0K cma-reserved)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.008316] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.081145] pid_max: default: 32768 minimum: 301
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.086173] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.093228] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.103415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.113907] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.121607] NET: Registered protocol family 16
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.127843] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.136944] registering PCI controller with io_map_base unset
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.380938] Can't analyze schedule() prologue at 803a5594
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.397346] PCI host bridge to bus 0000:00
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.401721] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.409076] pci_bus 0000:00: root bus resource [io 0x0000]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.415001] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.422238] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.430697] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Tue Sep 18 02:03:31 2018 kern.err kernel: [ 0.430709] pci 0000:00:00.0: invalid calibration data
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.436219] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.436273] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.436349] pci 0000:00:00.0: supports D1
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.436360] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.436594] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.436623] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.444420] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.452146] pci 0000:00:00.0: using irq 40 for pin 1
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.460605] clocksource: Switched to clocksource MIPS
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.467099] NET: Registered protocol family 2
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.472714] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.480143] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.486964] TCP: Hash tables configured (established 1024 bind 1024)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.493825] UDP hash table entries: 256 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.500051] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.507005] NET: Registered protocol family 1
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 0.511724] PCI: CLS 0 bytes, default 32
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.514469] Crashlog allocated RAM at address 0x3f00000
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.521117] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.535514] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.541756] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.561508] io scheduler noop registered
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.565683] io scheduler deadline registered (default)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.571626] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.581162] console [ttyS0] disabled
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.605037] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.614231] console [ttyS0] enabled
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.621651] bootconsole [early0] disabled
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 0.636053] m25p80 spi0.0: found s25fl064k, expected m25p80
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.653622] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.658775] 5 tp-link partitions found on MTD device spi0.0
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.664464] Creating 5 MTD partitions on "spi0.0":
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.669328] 0x000000000000-0x000000020000 : "u-boot"
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.676250] 0x000000020000-0x00000016df44 : "kernel"
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.683316] 0x00000016df44-0x0000007f0000 : "rootfs"
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.689919] mtd: device 2 (rootfs) set to be root filesystem
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.695747] 1 squashfs-split partitions found on MTD device rootfs
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.702035] 0x0000003b0000-0x0000007f0000 : "rootfs_data"
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.709616] 0x0000007f0000-0x000000800000 : "art"
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 0.716477] 0x000000020000-0x0000007f0000 : "firmware"
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.724753] libphy: Fixed MDIO Bus: probed
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 0.740882] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 1.412807] libphy: ag71xx_mdio: probed
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.042001] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.053523] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.061700] NET: Registered protocol family 10
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.070018] NET: Registered protocol family 17
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.074645] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.087902] 8021q: 802.1Q VLAN Support v1.8
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.093979] hctosys: unable to open rtc device (rtc0)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.104266] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 2.112828] Freeing unused kernel memory: 300K
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 2.117340] This architecture does not have kernel memory protection.
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 2.560620] random: fast init done
Tue Sep 18 02:03:31 2018 user.info kernel: [ 2.819649] init: Console is alive
Tue Sep 18 02:03:31 2018 user.info kernel: [ 2.823379] init: - watchdog -
Tue Sep 18 02:03:31 2018 user.info kernel: [ 3.789168] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.857975] usbcore: registered new interface driver usbfs
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.863685] usbcore: registered new interface driver hub
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.869170] usbcore: registered new device driver usb
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.879425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.887658] ehci-platform: EHCI generic platform driver
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.893113] ehci-platform ehci-platform: EHCI Host Controller
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.898995] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.909134] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.940646] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.947942] hub 1-0:1.0: USB hub found
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 3.952125] hub 1-0:1.0: 1 port detected
Tue Sep 18 02:03:31 2018 user.info kernel: [ 3.956944] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Sep 18 02:03:31 2018 user.info kernel: [ 3.974731] init: - preinit -
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 4.560671] usb 1-1: new high-speed USB device number 2 using ehci-platform
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 4.803574] random: procd: uninitialized urandom read (4 bytes read)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 4.810798] hub 1-1:1.0: USB hub found
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 4.816822] hub 1-1:1.0: 4 ports detected
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 4.825224] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 5.871857] eth0: link up (1000Mbps/Full duplex)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 5.876628] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 8.000950] jffs2: notice: (439) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Sep 18 02:03:31 2018 user.info kernel: [ 8.018016] mount_root: switching to jffs2 overlay
Tue Sep 18 02:03:31 2018 user.warn kernel: [ 8.051942] urandom-seed: Seeding with /etc/urandom.seed
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 8.255353] eth0: link down
Tue Sep 18 02:03:31 2018 user.info kernel: [ 8.269635] procd: - early -
Tue Sep 18 02:03:31 2018 user.info kernel: [ 8.273396] procd: - watchdog -
Tue Sep 18 02:03:31 2018 user.info kernel: [ 8.906253] procd: - watchdog -
Tue Sep 18 02:03:31 2018 user.info kernel: [ 8.909728] procd: - ubus -
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 9.018832] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 9.027896] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 9.034899] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Sep 18 02:03:31 2018 user.info kernel: [ 9.042563] procd: - init -
Tue Sep 18 02:03:31 2018 user.info kernel: [ 9.447015] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.458273] ip6_tables: (C) 2000-2006 Netfilter Core Team
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.476150] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.484327] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.494223] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.508552] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.570706] xt_time: kernel timezone is -0000
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.629607] PPP generic driver version 2.4.2
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.636511] NET: Registered protocol family 24
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681246] ath: EEPROM regdomain: 0x0
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681254] ath: EEPROM indicates default country code should be used
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681258] ath: doing EEPROM country->regdmn map search
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681273] ath: country maps to regdmn code: 0x3a
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681279] ath: Country alpha2 being used: US
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.681282] ath: Regpair used: 0x3a
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.693549] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.697443] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 9.704392] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715413] ath: EEPROM regdomain: 0x0
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715420] ath: EEPROM indicates default country code should be used
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715424] ath: doing EEPROM country->regdmn map search
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715439] ath: country maps to regdmn code: 0x3a
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715444] ath: Country alpha2 being used: US
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.715449] ath: Regpair used: 0x3a
Tue Sep 18 02:03:31 2018 kern.debug kernel: [ 9.725784] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Sep 18 02:03:31 2018 kern.info kernel: [ 9.729695] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Tue Sep 18 02:03:31 2018 user.info kernel: [ 9.867725] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Sep 18 02:03:31 2018 kern.warn kernel: [ 11.179796] urandom_read: 5 callbacks suppressed
Tue Sep 18 02:03:31 2018 kern.notice kernel: [ 11.179804] random: jshn: uninitialized urandom read (4 bytes read)
Tue Sep 18 02:03:32 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Sep 18 02:03:32 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: started, version 2.80test3 cachesize 150
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain test
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain onion
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain localhost
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain local
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain invalid
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain bind
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: using local addresses only for domain lan
Tue Sep 18 02:03:33 2018 daemon.warn dnsmasq[818]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: read /etc/hosts - 1 addresses
Tue Sep 18 02:03:33 2018 daemon.info dnsmasq[818]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: tunnel
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: Network device
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: bridge
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: veth
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: macvlan
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: 8021ad
Tue Sep 18 02:03:35 2018 user.notice : Added device handler type: 8021q
Tue Sep 18 02:03:38 2018 authpriv.info dropbear[966]: Not backgrounding
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Sep 18 02:03:39 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Sep 18 02:03:40 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Sep 18 02:03:40 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.763727] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.770978] eth0: link up (1000Mbps/Full duplex)
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.800686] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.813926] br-lan: port 1(eth0.1) entered blocking state
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.819555] br-lan: port 1(eth0.1) entered disabled state
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.825509] device eth0.1 entered promiscuous mode
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.830380] device eth0 entered promiscuous mode
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.895245] br-lan: port 1(eth0.1) entered blocking state
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.900783] br-lan: port 1(eth0.1) entered forwarding state
Tue Sep 18 02:03:41 2018 kern.info kernel: [ 21.906977] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Sep 18 02:03:41 2018 daemon.notice netifd: Interface 'lan' is enabled
Tue Sep 18 02:03:41 2018 daemon.notice netifd: Interface 'lan' is setting up now
Tue Sep 18 02:03:41 2018 daemon.notice netifd: Interface 'lan' is now up
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: reading /tmp/resolv.conf.auto
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain test
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain onion
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain localhost
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain local
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain invalid
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain bind
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using local addresses only for domain lan
Tue Sep 18 02:03:41 2018 daemon.info dnsmasq[818]: using nameserver 192.168.0.1#53
Tue Sep 18 02:03:41 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB1
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.253251] br-lan: port 2(eth0.2) entered blocking state
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.258931] br-lan: port 2(eth0.2) entered disabled state
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.264874] device eth0.2 entered promiscuous mode
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.269840] br-lan: port 2(eth0.2) entered blocking state
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.275363] br-lan: port 2(eth0.2) entered forwarding state
Tue Sep 18 02:03:42 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB2
Tue Sep 18 02:03:42 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN2G
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Interface 'loopback' is enabled
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Interface 'loopback' is now up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: bridge 'br-lan' link is up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Network device 'eth0' link is up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Network device 'lo' link is up
Tue Sep 18 02:03:42 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Sep 18 02:03:42 2018 kern.info kernel: [ 22.831033] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Sep 18 02:03:43 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Sep 18 02:03:43 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Tue Sep 18 02:03:43 2018 daemon.notice odhcpd[913]: Failed to send to ff02::1%br-lan (Address not available)
Tue Sep 18 02:03:45 2018 daemon.info procd: - init complete -
Tue Sep 18 02:03:45 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Tue Sep 18 02:03:45 2018 kern.info kernel: [ 25.983631] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Tue Sep 18 02:03:45 2018 kern.info kernel: [ 25.995296] br-lan: port 3(wlan1) entered blocking state
Tue Sep 18 02:03:45 2018 kern.info kernel: [ 26.000752] br-lan: port 3(wlan1) entered disabled state
Tue Sep 18 02:03:45 2018 kern.info kernel: [ 26.006538] device wlan1 entered promiscuous mode
Tue Sep 18 02:03:45 2018 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Sep 18 02:03:45 2018 daemon.err hostapd: Using interface wlan1 with hwaddr a0:f3:c1:ff:4c:72 and ssid "CyberShadow5"
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014604] ath: EEPROM regdomain: 0x8348
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014613] ath: EEPROM indicates we should expect a country code
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014620] ath: doing EEPROM country->regdmn map search
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014628] ath: country maps to regdmn code: 0x3a
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014634] ath: Country alpha2 being used: US
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014638] ath: Regpair used: 0x3a
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014645] ath: regdomain 0x8348 dynamically updated by user
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014727] ath: EEPROM regdomain: 0x8348
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014731] ath: EEPROM indicates we should expect a country code
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014737] ath: doing EEPROM country->regdmn map search
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014744] ath: country maps to regdmn code: 0x3a
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014748] ath: Country alpha2 being used: US
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014752] ath: Regpair used: 0x3a
Tue Sep 18 02:03:45 2018 kern.debug kernel: [ 26.014758] ath: regdomain 0x8348 dynamically updated by user
Tue Sep 18 02:03:46 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Tue Sep 18 02:03:46 2018 kern.info kernel: [ 26.720562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.935038] br-lan: port 4(wlan0) entered blocking state
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.940889] br-lan: port 4(wlan0) entered disabled state
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.946687] device wlan0 entered promiscuous mode
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.952358] br-lan: port 4(wlan0) entered blocking state
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.957758] br-lan: port 4(wlan0) entered forwarding state
Sat Sep 22 16:10:38 2018 kern.info kernel: [ 26.990729] br-lan: port 4(wlan0) entered disabled state
Sat Sep 22 16:10:38 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Sep 22 16:10:38 2018 daemon.err hostapd: Using interface wlan0 with hwaddr a0:f3:c1:ff:4c:71 and ssid "CyberShadow2"
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.340404] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.347089] br-lan: port 3(wlan1) entered blocking state
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.352529] br-lan: port 3(wlan1) entered forwarding state
Sat Sep 22 16:10:39 2018 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Sat Sep 22 16:10:39 2018 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Sep 22 16:10:39 2018 daemon.notice netifd: Network device 'wlan1' link is up
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.950731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.957367] br-lan: port 4(wlan0) entered blocking state
Sat Sep 22 16:10:39 2018 kern.info kernel: [ 27.962828] br-lan: port 4(wlan0) entered forwarding state
Sat Sep 22 16:10:39 2018 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Sat Sep 22 16:10:39 2018 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Sep 22 16:10:39 2018 daemon.notice netifd: Network device 'wlan0' link is up
Sat Sep 22 16:10:43 2018 kern.notice kernel: [ 31.416474] random: crng init done
Sat Sep 22 16:11:31 2018 authpriv.info dropbear[1502]: Child connection from 192.168.0.1:59118
Sat Sep 22 16:11:32 2018 authpriv.notice dropbear[1502]: Pubkey auth succeeded for 'root' with key sha1!! fb:34:c3:8b:2c:29:05:de:47:24:09:5f:4a:7e:38:ef:f1:e4:a4:ab from 192.168.0.1:59118
Sat Sep 22 16:11:42 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:11:48 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:11:56 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:03 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:09 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:12:09 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:12:09 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::ea0/128
Sat Sep 22 16:12:09 2018 daemon.info dnsmasq[818]: read /etc/hosts - 1 addresses
Sat Sep 22 16:12:09 2018 daemon.info dnsmasq[818]: read /tmp/hosts/odhcpd - 0 addresses
Sat Sep 22 16:12:09 2018 daemon.info dnsmasq[818]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Sep 22 16:12:10 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:12:17 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:23 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:29 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:35 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:12:43 2018 authpriv.info dropbear[1502]: Exit (root): Disconnect received
Sat Sep 22 16:12:43 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:12:44 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:12:44 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::ea0/128
Sat Sep 22 16:12:45 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:13:09 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:13:09 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: associated (aid 1)
Sat Sep 22 16:13:09 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a2:72:b8
Sat Sep 22 16:13:09 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 WPA: pairwise key handshake completed (RSN)
Sat Sep 22 16:13:11 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:13:15 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:13:19 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:16:07 2018 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a2:72:b8
Sat Sep 22 16:16:11 2018 daemon.info hostapd: wlan1: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:16:17 2018 daemon.info hostapd: wlan1: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:16:23 2018 daemon.info hostapd: wlan1: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:16:29 2018 daemon.info hostapd: wlan1: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:16:43 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: authenticated
Sat Sep 22 16:16:43 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 IEEE 802.11: associated (aid 1)
Sat Sep 22 16:16:43 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a2:72:b8
Sat Sep 22 16:16:43 2018 daemon.info hostapd: wlan0: STA 38:de:ad:a2:72:b8 WPA: pairwise key handshake completed (RSN)
Sat Sep 22 16:16:45 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:16:49 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:16:50 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:16:50 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:16:50 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:16:51 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:16:51 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:16:53 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:16:53 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:16:57 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:16:57 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:17:06 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:17:06 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:17:30 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:17:30 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::619/128
Sat Sep 22 16:20:23 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:22:42 2018 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a2:72:b8
Sat Sep 22 16:28:39 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:33:27 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:33:27 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:33:27 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 0004e4f7575cf9fd3f1dbcdcbe9cb3948379 on br-lan: ok fdba:c4c5:5a4b::500/128
Sat Sep 22 16:33:29 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:37:44 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:41:58 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:51:11 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:57:17 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:57:50 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:57:50 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:50 2018 daemon.warn odhcpd[913]: DHCPV6 CONFIRM IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: not on-link
Sat Sep 22 16:57:50 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:50 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: ok fdba:c4c5:5a4b::437/128
Sat Sep 22 16:57:51 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 16:57:51 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:51 2018 daemon.warn odhcpd[913]: DHCPV6 CONFIRM IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: not on-link
Sat Sep 22 16:57:51 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:51 2018 daemon.warn odhcpd[913]: DHCPV6 REQUEST IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: ok fdba:c4c5:5a4b::437/128
Sat Sep 22 16:57:52 2018 daemon.info dnsmasq[818]: read /etc/hosts - 1 addresses
Sat Sep 22 16:57:52 2018 daemon.info dnsmasq[818]: read /tmp/hosts/odhcpd - 1 addresses
Sat Sep 22 16:57:52 2018 daemon.info dnsmasq[818]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Sep 22 16:57:52 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:52 2018 daemon.warn odhcpd[913]: DHCPV6 SOLICIT IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: ok fdba:c4c5:5a4b::572/128
Sat Sep 22 16:57:53 2018 daemon.notice odhcpd[913]: Got DHCPv6 request
Sat Sep 22 16:57:53 2018 daemon.warn odhcpd[913]: DHCPV6 REQUEST IA_NA from 00040bff5b0cd6809e274414348b79d3b250 on br-lan: ok fdba:c4c5:5a4b::572/128
Sat Sep 22 16:57:53 2018 daemon.info dnsmasq[818]: read /etc/hosts - 1 addresses
Sat Sep 22 16:57:53 2018 daemon.info dnsmasq[818]: read /tmp/hosts/odhcpd - 2 addresses
Sat Sep 22 16:57:53 2018 daemon.info dnsmasq[818]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Sep 22 17:06:21 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:09:53 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:15:37 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:20:53 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:29:32 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:38:05 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:46:53 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 17:51:28 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:00:11 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:04:41 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:14:19 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:20:02 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:27:29 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:34:02 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:38:50 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:45:57 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:55:16 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 18:59:47 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:03:47 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:11:53 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:17:51 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:24:54 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:34:14 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:42:04 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:49:52 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:57:21 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sat Sep 22 19:59:05 2018 daemon.err uhttpd[997]: luci: accepted login on /admin/status/syslog for root from 192.168.0.232
Sat Sep 22 20:02:40 2018 daemon.info odhcpd[913]: Using a RA lifetime of 0 seconds on br-lan
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment