alona.gcode

; generated by PrusaSlicer 2.3.0-alpha3+win64 on 2020-11-10 at 23:18:11 UTC

; 

; external perimeters extrusion width = 0.60mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z8 E60 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E5.00 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107 ; disable fan
;TYPE:Custom
M80 172.29.14.101 1 ; light on
G90 ; use absolute coordinates
M83 ; extruder relative mode
M204 S1250 T1250
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
G28 ; home all
M420 S ; enable mesh levelling data
G1 Y0 Z1 F100 ; move print head up
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G92 E0
G1 E38 F1000; deretract filament
G92 E0
G1 X60 Z0 E9 ; intro line
G1 X100 E12.5 ; intro line
G92 E0
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
; Filament gcode
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
M117 INDICATOR-Layer1
;0.2
M104 S215

G1 E-6.00000 F2400.00000 ; retract
G1 Z0.075 F10800.000 ; lift Z
G1 Z0.200 ; move to next layer (0)
;AFTER_LAYER_CHANGE
;0.2
G1 Z0.275 ; lift Z
G1 X143.943 Y104.428 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
M204 S1250 ; adjust acceleration
;TYPE:Perimeter
G1 F1800.000
G1 X145.109 Y104.428 E0.03658 ; perimeter
G1 X145.418 Y107.139 E0.08556 ; perimeter
G1 X145.325 Y107.778 E0.02026 ; perimeter
G1 X145.154 Y108.637 E0.02745 ; perimeter
G1 X144.699 Y110.715 E0.06670 ; perimeter
G1 X144.699 Y118.968 E0.25875 ; perimeter
G1 X145.475 Y118.968 E0.02433 ; perimeter
G1 X145.591 Y120.188 E0.03845 ; perimeter
G1 X145.501 Y120.229 E0.00309 ; perimeter
G1 X145.449 Y121.683 E0.04561 ; perimeter
G1 X145.448 Y125.652 E0.12444 ; perimeter
G1 X145.482 Y126.672 E0.03199 ; perimeter
G1 X145.587 Y127.623 E0.03000 ; perimeter
G1 X145.482 Y128.576 E0.03009 ; perimeter
G1 X145.470 Y128.923 E0.01088 ; perimeter
G1 X143.604 Y128.923 E0.05851 ; perimeter
G1 X143.604 Y118.968 E0.31214 ; perimeter
G1 X144.353 Y118.968 E0.02350 ; perimeter
G1 X144.350 Y114.537 E0.13891 ; perimeter
G1 X144.285 Y113.140 E0.04385 ; perimeter
G1 X144.218 Y113.115 E0.00223 ; perimeter
G1 X144.347 Y111.695 E0.04470 ; perimeter
G1 X144.353 Y110.717 E0.03066 ; perimeter
G1 X143.897 Y108.637 E0.06676 ; perimeter
G1 X143.727 Y107.778 E0.02746 ; perimeter
G1 X143.634 Y107.139 E0.02024 ; perimeter
G1 X143.936 Y104.487 E0.08370 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X145.109 Y104.428 E-0.31004 ; wipe and retract
G1 X145.418 Y107.139 E-0.72011 ; wipe and retract
G1 X145.325 Y107.778 E-0.17053 ; wipe and retract
G1 X145.154 Y108.637 E-0.23106 ; wipe and retract
G1 X144.699 Y110.715 E-0.56140 ; wipe and retract
G1 X144.699 Y111.802 E-0.28686 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X142.443 Y112.543 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X142.080 Y112.612 E0.01157 ; perimeter
G1 X136.547 Y109.925 E0.19286 ; perimeter
G1 X136.377 Y109.598 E0.01157 ; perimeter
G1 X136.740 Y109.528 E0.01157 ; perimeter
G1 X142.273 Y112.215 E0.19286 ; perimeter
G1 X142.414 Y112.490 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X142.080 Y112.612 E-0.09380 ; wipe and retract
G1 X136.547 Y109.925 E-1.62322 ; wipe and retract
G1 X136.377 Y109.598 E-0.09737 ; wipe and retract
G1 X136.740 Y109.528 E-0.09737 ; wipe and retract
G1 X137.995 Y110.138 E-0.36824 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X147.631 Y119.323 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X147.777 Y118.984 E0.01157 ; perimeter
G1 X151.790 Y116.667 E0.14527 ; perimeter
G1 X152.156 Y116.711 E0.01157 ; perimeter
G1 X152.010 Y117.049 E0.01157 ; perimeter
G1 X147.998 Y119.366 E0.14527 ; perimeter
G1 X147.691 Y119.329 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X147.777 Y118.984 E-0.09379 ; wipe and retract
G1 X151.790 Y116.667 E-1.22265 ; wipe and retract
G1 X152.156 Y116.711 E-0.09736 ; wipe and retract
G1 X152.010 Y117.049 E-0.09737 ; wipe and retract
G1 X149.487 Y118.506 E-0.76883 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X153.611 Y115.594 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X153.317 Y115.071 E0.01881 ; perimeter
G1 X153.168 Y114.853 E0.00829 ; perimeter
G1 X152.931 Y114.411 E0.01572 ; perimeter
G1 X152.759 Y113.962 E0.01507 ; perimeter
G1 X152.665 Y113.543 E0.01347 ; perimeter
G1 X152.617 Y113.502 E0.00196 ; perimeter
G1 X152.617 Y112.557 E0.02963 ; perimeter
G1 X152.664 Y112.516 E0.00196 ; perimeter
G1 X152.758 Y112.098 E0.01345 ; perimeter
G1 X152.928 Y111.657 E0.01481 ; perimeter
G1 X153.161 Y111.246 E0.01481 ; perimeter
G1 X153.452 Y110.873 E0.01482 ; perimeter
G1 X153.799 Y110.542 E0.01503 ; perimeter
G1 X154.202 Y110.246 E0.01568 ; perimeter
G1 X154.428 Y110.115 E0.00820 ; perimeter
G1 X154.927 Y109.770 E0.01901 ; perimeter
G1 X155.953 Y109.813 E0.03220 ; perimeter
G1 X156.454 Y109.879 E0.01584 ; perimeter
G1 X156.912 Y110.006 E0.01492 ; perimeter
G1 X157.339 Y110.195 E0.01464 ; perimeter
G1 X157.467 Y110.280 E0.00481 ; perimeter
G1 X157.158 Y110.589 E0.01372 ; perimeter
G1 X156.899 Y110.451 E0.00921 ; perimeter
G1 X156.375 Y110.292 E0.01715 ; perimeter
G1 X155.831 Y110.239 E0.01715 ; perimeter
G1 X155.286 Y110.292 E0.01715 ; perimeter
G1 X154.763 Y110.451 E0.01715 ; perimeter
G1 X154.280 Y110.709 E0.01715 ; perimeter
G1 X153.857 Y111.056 E0.01715 ; perimeter
G1 X153.510 Y111.479 E0.01715 ; perimeter
G1 X153.254 Y111.959 E0.01707 ; perimeter
G1 X153.093 Y112.486 E0.01726 ; perimeter
G1 X153.041 Y113.033 E0.01722 ; perimeter
G1 X153.094 Y113.574 E0.01704 ; perimeter
G1 X153.253 Y114.098 E0.01717 ; perimeter
G1 X153.511 Y114.580 E0.01715 ; perimeter
G1 X153.858 Y115.003 E0.01715 ; perimeter
G1 X154.281 Y115.350 E0.01715 ; perimeter
G1 X154.763 Y115.608 E0.01715 ; perimeter
G1 X155.287 Y115.767 E0.01715 ; perimeter
G1 X155.831 Y115.820 E0.01715 ; perimeter
G1 X156.376 Y115.767 E0.01715 ; perimeter
G1 X156.899 Y115.608 E0.01715 ; perimeter
G1 X157.158 Y115.470 E0.00920 ; perimeter
G1 X157.468 Y115.779 E0.01372 ; perimeter
G1 X157.340 Y115.863 E0.00481 ; perimeter
G1 X156.913 Y116.053 E0.01463 ; perimeter
G1 X156.458 Y116.179 E0.01481 ; perimeter
G1 X155.989 Y116.236 E0.01481 ; perimeter
G1 X155.516 Y116.225 E0.01482 ; perimeter
G1 X155.048 Y116.144 E0.01490 ; perimeter
G1 X154.578 Y115.993 E0.01548 ; perimeter
G1 X153.662 Y115.578 E0.03152 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X153.317 Y115.071 E-0.16192 ; wipe and retract
G1 X153.168 Y114.853 E-0.06975 ; wipe and retract
G1 X152.931 Y114.411 E-0.13234 ; wipe and retract
G1 X152.759 Y113.962 E-0.12683 ; wipe and retract
G1 X152.665 Y113.543 E-0.11337 ; wipe and retract
G1 X152.617 Y113.502 E-0.01649 ; wipe and retract
G1 X152.617 Y112.557 E-0.24941 ; wipe and retract
G1 X152.664 Y112.516 E-0.01648 ; wipe and retract
G1 X152.758 Y112.098 E-0.11324 ; wipe and retract
G1 X152.928 Y111.657 E-0.12466 ; wipe and retract
G1 X153.161 Y111.246 E-0.12466 ; wipe and retract
G1 X153.452 Y110.873 E-0.12476 ; wipe and retract
G1 X153.799 Y110.542 E-0.12652 ; wipe and retract
G1 X154.202 Y110.246 E-0.13197 ; wipe and retract
G1 X154.428 Y110.115 E-0.06902 ; wipe and retract
G1 X154.927 Y109.770 E-0.16000 ; wipe and retract
G1 X155.953 Y109.813 E-0.27103 ; wipe and retract
G1 X156.454 Y109.879 E-0.13335 ; wipe and retract
G1 X156.506 Y109.894 E-0.01421 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X154.802 Y108.201 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X154.581 Y107.905 E0.01157 ; perimeter
G1 X154.581 Y100.054 E0.24616 ; perimeter
G1 X154.802 Y99.758 E0.01157 ; perimeter
G1 X155.022 Y100.054 E0.01157 ; perimeter
G1 X155.022 Y107.905 E0.24616 ; perimeter
G1 X154.837 Y108.152 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X154.581 Y107.905 E-0.09381 ; wipe and retract
G1 X154.581 Y100.054 E-2.07180 ; wipe and retract
G1 X154.802 Y99.758 E-0.09738 ; wipe and retract
G1 X154.840 Y99.810 E-0.01700 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.380 Y126.545 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X169.154 Y126.545 E0.02425 ; perimeter
G1 X169.158 Y129.708 E0.09919 ; perimeter
G1 X169.187 Y130.232 E0.01645 ; perimeter
G1 X169.293 Y131.179 E0.02987 ; perimeter
G1 X169.188 Y132.104 E0.02919 ; perimeter
G1 X169.158 Y132.615 E0.01606 ; perimeter
G1 X169.154 Y137.210 E0.14407 ; perimeter
G1 X167.309 Y137.210 E0.05785 ; perimeter
G1 X167.309 Y126.545 E0.33440 ; perimeter
G1 X168.081 Y126.545 E0.02423 ; perimeter
G1 X168.081 Y109.180 E0.54446 ; perimeter
G1 X168.047 Y108.173 E0.03160 ; perimeter
G1 X167.942 Y107.228 E0.02980 ; perimeter
G1 X168.047 Y106.282 E0.02984 ; perimeter
G1 X168.081 Y105.274 E0.03164 ; perimeter
G1 X168.081 Y95.221 E0.31518 ; perimeter
G1 X168.382 Y95.221 E0.00942 ; perimeter
G1 X168.386 Y96.806 E0.04970 ; perimeter
G1 X168.415 Y97.292 E0.01527 ; perimeter
G1 X168.521 Y98.180 E0.02804 ; perimeter
G1 X168.414 Y99.142 E0.03034 ; perimeter
G1 X168.381 Y100.159 E0.03189 ; perimeter
G1 X168.380 Y126.485 E0.82544 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X169.154 Y126.545 E-0.20473 ; wipe and retract
G1 X169.158 Y129.708 E-0.83484 ; wipe and retract
G1 X169.187 Y130.232 E-0.13842 ; wipe and retract
G1 X169.293 Y131.179 E-0.25136 ; wipe and retract
G1 X169.188 Y132.104 E-0.24568 ; wipe and retract
G1 X169.158 Y132.615 E-0.13520 ; wipe and retract
G1 X169.156 Y134.396 E-0.46977 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X164.063 Y126.545 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X164.063 Y137.210 E0.33440 ; perimeter
G1 X162.217 Y137.210 E0.05789 ; perimeter
G1 X162.213 Y136.168 E0.03267 ; perimeter
G1 X162.184 Y135.706 E0.01454 ; perimeter
G1 X162.077 Y134.848 E0.02709 ; perimeter
G1 X162.184 Y133.905 E0.02975 ; perimeter
G1 X162.213 Y133.396 E0.01599 ; perimeter
G1 X162.213 Y129.061 E0.13592 ; perimeter
G1 X162.184 Y128.551 E0.01603 ; perimeter
G1 X162.078 Y127.617 E0.02948 ; perimeter
G1 X162.192 Y126.545 E0.03380 ; perimeter
G1 X162.991 Y126.545 E0.02507 ; perimeter
G1 X162.991 Y95.221 E0.98213 ; perimeter
G1 X163.290 Y95.221 E0.00938 ; perimeter
G1 X163.291 Y105.274 E0.31518 ; perimeter
G1 X163.324 Y106.282 E0.03164 ; perimeter
G1 X163.430 Y107.228 E0.02984 ; perimeter
G1 X163.324 Y108.173 E0.02980 ; perimeter
G1 X163.291 Y109.180 E0.03160 ; perimeter
G1 X163.290 Y126.545 E0.54446 ; perimeter
G1 X164.003 Y126.545 E0.02235 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X164.052 Y135.185 E-2.28000 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X161.408 Y89.535 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X160.326 Y89.535 E0.03391 ; perimeter
G1 X160.031 Y89.315 E0.01156 ; perimeter
G1 X160.326 Y89.094 E0.01156 ; perimeter
G1 X161.408 Y89.094 E0.03391 ; perimeter
G1 X161.703 Y89.315 E0.01156 ; perimeter
G1 X161.453 Y89.496 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X160.326 Y89.535 E-0.29752 ; wipe and retract
G1 X160.031 Y89.315 E-0.09730 ; wipe and retract
G1 X160.326 Y89.094 E-0.09730 ; wipe and retract
G1 X161.408 Y89.094 E-0.28540 ; wipe and retract
G1 X161.703 Y89.315 E-0.09730 ; wipe and retract
G1 X161.453 Y89.496 E-0.08152 ; wipe and retract
G1 E-1.44365 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X152.591 Y97.822 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X152.225 Y98.605 E0.02709 ; perimeter
G1 X152.059 Y98.843 E0.00911 ; perimeter
G1 X151.854 Y99.048 E0.00910 ; perimeter
G1 X151.616 Y99.215 E0.00910 ; perimeter
G1 X151.353 Y99.337 E0.00910 ; perimeter
G1 X151.073 Y99.412 E0.00910 ; perimeter
G1 X150.783 Y99.438 E0.00910 ; perimeter
G1 X150.494 Y99.412 E0.00910 ; perimeter
G1 X150.214 Y99.337 E0.00910 ; perimeter
G1 X149.951 Y99.215 E0.00910 ; perimeter
G1 X149.713 Y99.048 E0.00910 ; perimeter
G1 X149.508 Y98.843 E0.00910 ; perimeter
G1 X149.342 Y98.605 E0.00910 ; perimeter
G1 X148.978 Y97.825 E0.02698 ; perimeter
G1 X143.263 Y97.825 E0.17920 ; perimeter
G1 X143.258 Y94.735 E0.09690 ; perimeter
G1 X143.229 Y94.220 E0.01617 ; perimeter
G1 X143.124 Y93.290 E0.02935 ; perimeter
G1 X143.230 Y92.336 E0.03008 ; perimeter
G1 X143.263 Y91.319 E0.03193 ; perimeter
G1 X143.264 Y83.720 E0.23823 ; perimeter
G1 X156.636 Y83.720 E0.41929 ; perimeter
G1 X157.645 Y83.687 E0.03164 ; perimeter
G1 X158.332 Y83.610 E0.02168 ; perimeter
G1 X158.308 Y84.084 E0.01488 ; perimeter
G1 X158.309 Y87.889 E0.11930 ; perimeter
G1 X158.338 Y88.394 E0.01586 ; perimeter
G1 X158.443 Y89.310 E0.02891 ; perimeter
G1 X158.338 Y90.255 E0.02980 ; perimeter
G1 X158.309 Y90.776 E0.01637 ; perimeter
G1 X158.304 Y97.827 E0.22108 ; perimeter
G1 X156.231 Y97.831 E0.06498 ; perimeter
G1 X155.725 Y97.860 E0.01590 ; perimeter
G1 X154.780 Y97.968 E0.02980 ; perimeter
G1 X153.956 Y97.861 E0.02608 ; perimeter
G1 X153.517 Y97.831 E0.01380 ; perimeter
G1 X152.651 Y97.823 E0.02715 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X152.225 Y98.605 E-0.23501 ; wipe and retract
G1 X152.059 Y98.843 E-0.07664 ; wipe and retract
G1 X151.854 Y99.048 E-0.07657 ; wipe and retract
G1 X151.616 Y99.215 E-0.07658 ; wipe and retract
G1 X151.353 Y99.337 E-0.07657 ; wipe and retract
G1 X151.073 Y99.412 E-0.07657 ; wipe and retract
G1 X150.783 Y99.438 E-0.07658 ; wipe and retract
G1 X150.494 Y99.412 E-0.07658 ; wipe and retract
G1 X150.214 Y99.337 E-0.07658 ; wipe and retract
G1 X149.951 Y99.215 E-0.07658 ; wipe and retract
G1 X149.713 Y99.048 E-0.07657 ; wipe and retract
G1 X149.508 Y98.843 E-0.07658 ; wipe and retract
G1 X149.342 Y98.605 E-0.07658 ; wipe and retract
G1 X148.978 Y97.825 E-0.22707 ; wipe and retract
G1 X145.572 Y97.825 E-0.89893 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.590 Y81.718 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X158.370 Y81.423 E0.01157 ; perimeter
G1 X158.370 Y78.562 E0.08971 ; perimeter
G1 X158.590 Y78.266 E0.01157 ; perimeter
G1 X158.811 Y78.562 E0.01157 ; perimeter
G1 X158.811 Y81.423 E0.08971 ; perimeter
G1 X158.625 Y81.670 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X158.370 Y81.423 E-0.09381 ; wipe and retract
G1 X158.370 Y78.562 E-0.75501 ; wipe and retract
G1 X158.590 Y78.266 E-0.09738 ; wipe and retract
G1 X158.811 Y78.562 E-0.09738 ; wipe and retract
G1 X158.811 Y81.423 E-0.75501 ; wipe and retract
G1 X158.625 Y81.670 E-0.08155 ; wipe and retract
G1 E-0.51986 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.829 Y73.581 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X168.829 Y74.987 E0.04407 ; perimeter
G1 X160.559 Y74.987 E0.25927 ; perimeter
G1 X159.541 Y75.020 E0.03194 ; perimeter
G1 X158.584 Y75.126 E0.03019 ; perimeter
G1 X157.669 Y75.021 E0.02889 ; perimeter
G1 X157.164 Y74.992 E0.01585 ; perimeter
G1 X154.807 Y74.987 E0.07390 ; perimeter
G1 X154.090 Y74.951 E0.02252 ; perimeter
G1 X153.414 Y74.847 E0.02145 ; perimeter
G1 X153.127 Y74.770 E0.00931 ; perimeter
G1 X149.775 Y74.404 E0.10573 ; perimeter
G1 X148.872 Y74.284 E0.02857 ; perimeter
G1 X149.775 Y74.164 E0.02857 ; perimeter
G1 X153.127 Y73.797 E0.10573 ; perimeter
G1 X153.414 Y73.721 E0.00931 ; perimeter
G1 X154.090 Y73.617 E0.02145 ; perimeter
G1 X154.807 Y73.581 E0.02252 ; perimeter
G1 X157.109 Y73.576 E0.07218 ; perimeter
G1 X157.604 Y73.546 E0.01553 ; perimeter
G1 X158.503 Y73.441 E0.02838 ; perimeter
G1 X159.468 Y73.547 E0.03044 ; perimeter
G1 X160.493 Y73.581 E0.03217 ; perimeter
G1 X168.769 Y73.581 E0.25947 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X168.829 Y74.987 E-0.37128 ; wipe and retract
G1 X161.595 Y74.987 E-1.90872 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X170.682 Y78.664 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X170.705 Y78.696 E0.00124 ; perimeter
G1 X170.392 Y79.042 E0.01463 ; perimeter
G1 X170.164 Y79.336 E0.01167 ; perimeter
G1 X169.771 Y79.945 E0.02273 ; perimeter
G1 X168.965 Y80.634 E0.03326 ; perimeter
G1 X167.211 Y81.902 E0.06786 ; perimeter
G1 X166.567 Y81.022 E0.03418 ; perimeter
G1 X168.284 Y79.765 E0.06672 ; perimeter
G1 X169.365 Y79.283 E0.03713 ; perimeter
G1 X170.627 Y78.689 E0.04373 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X170.705 Y78.696 E-0.02058 ; wipe and retract
G1 X170.392 Y79.042 E-0.12312 ; wipe and retract
G1 X170.164 Y79.336 E-0.09821 ; wipe and retract
G1 X169.771 Y79.945 E-0.19127 ; wipe and retract
G1 X168.965 Y80.634 E-0.27993 ; wipe and retract
G1 X167.211 Y81.902 E-0.57114 ; wipe and retract
G1 X166.567 Y81.022 E-0.28766 ; wipe and retract
G1 X168.284 Y79.765 E-0.56153 ; wipe and retract
G1 X168.791 Y79.539 E-0.14656 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X131.503 Y104.726 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X131.521 Y113.402 E0.27200 ; perimeter
G1 X125.276 Y113.415 E0.19581 ; perimeter
G1 X125.258 Y104.739 E0.27200 ; perimeter
G1 X131.443 Y104.726 E0.19393 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X131.521 Y113.366 E-2.28000 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X129.444 Y125.260 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X130.394 Y125.354 E0.02992 ; perimeter
G1 X131.307 Y125.631 E0.02992 ; perimeter
G1 X132.149 Y126.081 E0.02992 ; perimeter
G1 X132.886 Y126.686 E0.02991 ; perimeter
G1 X133.492 Y127.423 E0.02991 ; perimeter
G1 X133.941 Y128.264 E0.02991 ; perimeter
G1 X134.218 Y129.177 E0.02991 ; perimeter
G1 X134.312 Y130.126 E0.02991 ; perimeter
G1 X134.218 Y131.076 E0.02991 ; perimeter
G1 X133.941 Y131.988 E0.02991 ; perimeter
G1 X133.492 Y132.830 E0.02991 ; perimeter
G1 X132.886 Y133.567 E0.02991 ; perimeter
G1 X132.149 Y134.172 E0.02991 ; perimeter
G1 X131.307 Y134.622 E0.02992 ; perimeter
G1 X130.394 Y134.899 E0.02992 ; perimeter
G1 X129.444 Y134.992 E0.02992 ; perimeter
G1 X128.495 Y134.899 E0.02992 ; perimeter
G1 X127.581 Y134.622 E0.02992 ; perimeter
G1 X126.740 Y134.172 E0.02992 ; perimeter
G1 X126.002 Y133.567 E0.02991 ; perimeter
G1 X125.397 Y132.830 E0.02991 ; perimeter
G1 X124.947 Y131.988 E0.02991 ; perimeter
G1 X124.670 Y131.076 E0.02991 ; perimeter
G1 X124.577 Y130.126 E0.02991 ; perimeter
G1 X124.670 Y129.177 E0.02991 ; perimeter
G1 X124.947 Y128.264 E0.02991 ; perimeter
G1 X125.397 Y127.423 E0.02991 ; perimeter
G1 X126.002 Y126.686 E0.02991 ; perimeter
G1 X126.740 Y126.081 E0.02991 ; perimeter
G1 X127.581 Y125.631 E0.02992 ; perimeter
G1 X128.495 Y125.354 E0.02992 ; perimeter
G1 X129.385 Y125.266 E0.02804 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X130.394 Y125.354 E-0.26737 ; wipe and retract
G1 X131.307 Y125.631 E-0.25181 ; wipe and retract
G1 X132.149 Y126.081 E-0.25179 ; wipe and retract
G1 X132.886 Y126.686 E-0.25177 ; wipe and retract
G1 X133.492 Y127.423 E-0.25175 ; wipe and retract
G1 X133.941 Y128.264 E-0.25173 ; wipe and retract
G1 X134.218 Y129.177 E-0.25171 ; wipe and retract
G1 X134.312 Y130.126 E-0.25170 ; wipe and retract
G1 X134.219 Y131.070 E-0.25035 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X122.632 Y130.618 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X122.337 Y130.398 E0.01155 ; perimeter
G1 X118.175 Y130.407 E0.13049 ; perimeter
G1 X118.175 Y109.785 E0.64657 ; perimeter
G1 X120.210 Y109.794 E0.06378 ; perimeter
G1 X120.504 Y109.575 E0.01151 ; perimeter
G1 X120.209 Y109.355 E0.01151 ; perimeter
G1 X118.175 Y109.365 E0.06378 ; perimeter
G1 X118.175 Y93.511 E0.49710 ; perimeter
G1 X119.664 Y93.521 E0.04667 ; perimeter
G1 X119.958 Y93.302 E0.01150 ; perimeter
G1 X119.664 Y93.082 E0.01150 ; perimeter
G1 X118.175 Y93.093 E0.04667 ; perimeter
G1 X118.175 Y74.928 E0.56956 ; perimeter
G1 X140.819 Y74.928 E0.70997 ; perimeter
G1 X141.952 Y73.794 E0.05024 ; perimeter
G1 X141.952 Y68.428 E0.16827 ; perimeter
G1 X158.302 Y68.428 E0.51266 ; perimeter
G1 X158.293 Y70.733 E0.07228 ; perimeter
G1 X158.513 Y71.028 E0.01152 ; perimeter
G1 X158.733 Y70.733 E0.01152 ; perimeter
G1 X158.723 Y68.428 E0.07228 ; perimeter
G1 X171.240 Y68.428 E0.39243 ; perimeter
G1 X171.918 Y68.481 E0.02133 ; perimeter
G1 X172.495 Y68.619 E0.01860 ; perimeter
G1 X173.043 Y68.846 E0.01860 ; perimeter
G1 X173.549 Y69.156 E0.01860 ; perimeter
G1 X174.000 Y69.542 E0.01860 ; perimeter
G1 X174.385 Y69.993 E0.01860 ; perimeter
G1 X174.695 Y70.498 E0.01860 ; perimeter
G1 X174.922 Y71.047 E0.01860 ; perimeter
G1 X175.060 Y71.623 E0.01860 ; perimeter
G1 X175.114 Y72.302 E0.02133 ; perimeter
G1 X175.114 Y83.618 E0.35483 ; perimeter
G1 X174.141 Y84.021 E0.03301 ; perimeter
G1 X171.494 Y81.363 E0.11761 ; perimeter
G1 X171.130 Y81.310 E0.01154 ; perimeter
G1 X171.183 Y81.675 E0.01155 ; perimeter
G1 X175.114 Y85.594 E0.17405 ; perimeter
G1 X175.114 Y97.980 E0.38835 ; perimeter
G1 X170.501 Y97.972 E0.14463 ; perimeter
G1 X170.206 Y98.192 E0.01155 ; perimeter
G1 X170.501 Y98.412 E0.01155 ; perimeter
G1 X175.114 Y98.404 E0.14463 ; perimeter
G1 X175.114 Y130.964 E1.02089 ; perimeter
G1 X171.305 Y130.955 E0.11943 ; perimeter
G1 X171.010 Y131.175 E0.01154 ; perimeter
G1 X171.305 Y131.395 E0.01154 ; perimeter
G1 X175.114 Y131.387 E0.11943 ; perimeter
G1 X175.114 Y137.698 E0.19790 ; perimeter
G1 X175.060 Y138.377 E0.02133 ; perimeter
G1 X174.922 Y138.953 E0.01860 ; perimeter
G1 X174.695 Y139.502 E0.01860 ; perimeter
G1 X174.385 Y140.007 E0.01860 ; perimeter
G1 X174.000 Y140.458 E0.01860 ; perimeter
G1 X173.549 Y140.844 E0.01860 ; perimeter
G1 X173.043 Y141.154 E0.01860 ; perimeter
G1 X172.495 Y141.381 E0.01860 ; perimeter
G1 X171.918 Y141.519 E0.01860 ; perimeter
G1 X171.240 Y141.572 E0.02133 ; perimeter
G1 X150.582 Y141.572 E0.64769 ; perimeter
G1 X150.591 Y137.670 E0.12234 ; perimeter
G1 X150.371 Y137.375 E0.01155 ; perimeter
G1 X150.151 Y137.670 E0.01155 ; perimeter
G1 X150.159 Y141.572 E0.12234 ; perimeter
G1 X122.049 Y141.572 E0.88136 ; perimeter
G1 X121.371 Y141.519 E0.02133 ; perimeter
G1 X120.794 Y141.381 E0.01860 ; perimeter
G1 X120.246 Y141.154 E0.01860 ; perimeter
G1 X119.737 Y140.842 E0.01872 ; perimeter
G1 X119.256 Y140.420 E0.02006 ; perimeter
G1 X118.904 Y140.007 E0.01700 ; perimeter
G1 X118.594 Y139.502 E0.01860 ; perimeter
G1 X118.367 Y138.953 E0.01860 ; perimeter
G1 X118.229 Y138.377 E0.01860 ; perimeter
G1 X118.175 Y137.698 E0.02133 ; perimeter
G1 X118.175 Y130.830 E0.21535 ; perimeter
G1 X122.337 Y130.839 E0.13049 ; perimeter
G1 X122.584 Y130.653 E0.00967 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X122.337 Y130.398 E-0.09360 ; wipe and retract
G1 X118.175 Y130.407 E-1.09829 ; wipe and retract
G1 X118.175 Y126.283 E-1.08811 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X134.879 Y109.080 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:External perimeter
G1 F1800.000
G1 X135.949 Y109.600 E0.03733 ; perimeter
G1 X136.178 Y110.020 E0.01500 ; perimeter
G1 X136.255 Y110.203 E0.00623 ; perimeter
G1 X142.043 Y113.013 E0.20172 ; perimeter
G1 X142.235 Y112.961 E0.00623 ; perimeter
G1 X142.706 Y112.880 E0.01500 ; perimeter
G1 X143.245 Y113.142 E0.01880 ; perimeter
G1 X143.920 Y113.403 E0.02267 ; perimeter
G1 X143.973 Y114.546 E0.03588 ; perimeter
G1 X143.976 Y118.590 E0.12680 ; perimeter
G1 X143.227 Y118.590 E0.02349 ; perimeter
G1 X143.227 Y129.300 E0.33579 ; perimeter
G1 X145.834 Y129.300 E0.08175 ; perimeter
G1 X145.858 Y128.604 E0.02185 ; perimeter
G1 X145.946 Y127.812 E0.02498 ; perimeter
G1 X146.690 Y127.812 E0.02334 ; perimeter
G1 X147.079 Y128.090 E0.01500 ; perimeter
G1 X147.229 Y128.221 E0.00623 ; perimeter
G1 X148.412 Y128.221 E0.03711 ; perimeter
G1 X148.562 Y128.090 E0.00623 ; perimeter
G1 X148.950 Y127.812 E0.01498 ; perimeter
G1 X149.727 Y127.809 E0.02434 ; perimeter
G1 X150.096 Y129.130 E0.04300 ; perimeter
G1 X150.312 Y129.614 E0.01661 ; perimeter
G1 X150.597 Y130.046 E0.01625 ; perimeter
G1 X150.769 Y130.052 E0.00539 ; perimeter
G1 X151.511 Y129.311 E0.03288 ; perimeter
G1 X151.249 Y128.847 E0.01670 ; perimeter
G1 X151.112 Y128.394 E0.01483 ; perimeter
G1 X151.066 Y127.924 E0.01483 ; perimeter
G1 X151.112 Y127.453 E0.01483 ; perimeter
G1 X151.249 Y127.001 E0.01483 ; perimeter
G1 X151.472 Y126.584 E0.01483 ; perimeter
G1 X151.772 Y126.218 E0.01482 ; perimeter
G1 X152.137 Y125.918 E0.01483 ; perimeter
G1 X152.554 Y125.695 E0.01483 ; perimeter
G1 X153.007 Y125.558 E0.01483 ; perimeter
G1 X153.480 Y125.512 E0.01489 ; perimeter
G1 X153.943 Y125.556 E0.01459 ; perimeter
G1 X154.403 Y125.696 E0.01507 ; perimeter
G1 X154.817 Y125.918 E0.01475 ; perimeter
G1 X155.183 Y126.218 E0.01483 ; perimeter
G1 X155.483 Y126.583 E0.01483 ; perimeter
G1 X155.706 Y127.000 E0.01483 ; perimeter
G1 X155.843 Y127.453 E0.01482 ; perimeter
G1 X155.890 Y127.923 E0.01483 ; perimeter
G1 X155.843 Y128.394 E0.01483 ; perimeter
G1 X155.706 Y128.846 E0.01483 ; perimeter
G1 X155.445 Y129.310 E0.01670 ; perimeter
G1 X156.186 Y130.052 E0.03288 ; perimeter
G1 X156.358 Y130.046 E0.00539 ; perimeter
G1 X156.644 Y129.613 E0.01625 ; perimeter
G1 X156.859 Y129.129 E0.01661 ; perimeter
G1 X157.229 Y127.808 E0.04301 ; perimeter
G1 X157.971 Y127.812 E0.02325 ; perimeter
G1 X158.359 Y128.090 E0.01496 ; perimeter
G1 X158.509 Y128.221 E0.00623 ; perimeter
G1 X159.692 Y128.221 E0.03711 ; perimeter
G1 X159.842 Y128.090 E0.00623 ; perimeter
G1 X160.231 Y127.812 E0.01500 ; perimeter
G1 X161.720 Y127.812 E0.04671 ; perimeter
G1 X161.808 Y128.583 E0.02434 ; perimeter
G1 X161.836 Y129.072 E0.01537 ; perimeter
G1 X161.841 Y132.423 E0.10505 ; perimeter
G1 X161.836 Y133.384 E0.03015 ; perimeter
G1 X161.808 Y133.873 E0.01536 ; perimeter
G1 X161.720 Y134.645 E0.02434 ; perimeter
G1 X160.891 Y134.645 E0.02601 ; perimeter
G1 X160.502 Y134.366 E0.01500 ; perimeter
G1 X160.352 Y134.235 E0.00623 ; perimeter
G1 X158.669 Y134.235 E0.05279 ; perimeter
G1 X158.519 Y134.366 E0.00623 ; perimeter
G1 X158.130 Y134.645 E0.01500 ; perimeter
G1 X157.041 Y134.645 E0.03413 ; perimeter
G1 X156.965 Y133.950 E0.02192 ; perimeter
G1 X156.935 Y133.147 E0.02519 ; perimeter
G1 X156.682 Y133.147 E0.00793 ; perimeter
G1 X156.472 Y133.901 E0.02455 ; perimeter
G1 X155.287 Y133.923 E0.03715 ; perimeter
G1 X155.084 Y133.148 E0.02510 ; perimeter
G1 X154.679 Y133.148 E0.01272 ; perimeter
G1 X154.479 Y133.923 E0.02508 ; perimeter
G1 X153.233 Y133.923 E0.03904 ; perimeter
G1 X153.033 Y133.148 E0.02508 ; perimeter
G1 X152.578 Y133.148 E0.01426 ; perimeter
G1 X152.378 Y133.923 E0.02508 ; perimeter
G1 X150.876 Y133.923 E0.04711 ; perimeter
G1 X150.676 Y133.148 E0.02508 ; perimeter
G1 X150.066 Y133.148 E0.01913 ; perimeter
G1 X149.866 Y133.923 E0.02508 ; perimeter
G1 X148.363 Y133.923 E0.04711 ; perimeter
G1 X148.163 Y133.148 E0.02508 ; perimeter
G1 X147.708 Y133.148 E0.01426 ; perimeter
G1 X147.508 Y133.923 E0.02508 ; perimeter
G1 X146.263 Y133.923 E0.03904 ; perimeter
G1 X146.063 Y133.148 E0.02508 ; perimeter
G1 X145.657 Y133.148 E0.01272 ; perimeter
G1 X145.455 Y133.923 E0.02510 ; perimeter
G1 X144.270 Y133.901 E0.03715 ; perimeter
G1 X144.059 Y133.147 E0.02455 ; perimeter
G1 X143.806 Y133.147 E0.00794 ; perimeter
G1 X143.776 Y133.937 E0.02478 ; perimeter
G1 X143.697 Y134.681 E0.02349 ; perimeter
G1 X142.542 Y134.482 E0.03675 ; perimeter
G1 X142.206 Y134.142 E0.01500 ; perimeter
G1 X142.081 Y133.988 E0.00622 ; perimeter
G1 X135.612 Y132.872 E0.20581 ; perimeter
G1 X135.443 Y132.975 E0.00623 ; perimeter
G1 X135.012 Y133.184 E0.01500 ; perimeter
G1 X133.995 Y133.008 E0.03238 ; perimeter
G1 X134.215 Y132.374 E0.02105 ; perimeter
G1 X134.314 Y132.162 E0.00735 ; perimeter
G1 X134.601 Y131.154 E0.03286 ; perimeter
G1 X134.702 Y130.126 E0.03236 ; perimeter
G1 X134.601 Y129.101 E0.03230 ; perimeter
G1 X134.302 Y128.115 E0.03231 ; perimeter
G1 X133.816 Y127.206 E0.03231 ; perimeter
G1 X133.162 Y126.410 E0.03231 ; perimeter
G1 X132.365 Y125.756 E0.03231 ; perimeter
G1 X131.456 Y125.271 E0.03231 ; perimeter
G1 X130.470 Y124.971 E0.03232 ; perimeter
G1 X129.444 Y124.870 E0.03232 ; perimeter
G1 X128.419 Y124.971 E0.03232 ; perimeter
G1 X127.432 Y125.271 E0.03232 ; perimeter
G1 X126.523 Y125.756 E0.03231 ; perimeter
G1 X125.727 Y126.410 E0.03231 ; perimeter
G1 X125.073 Y127.206 E0.03231 ; perimeter
G1 X124.587 Y128.115 E0.03231 ; perimeter
G1 X124.284 Y129.108 E0.03253 ; perimeter
G1 X124.182 Y129.814 E0.02239 ; perimeter
G1 X124.027 Y130.436 E0.02008 ; perimeter
G1 X123.015 Y130.429 E0.03171 ; perimeter
G1 X122.628 Y130.151 E0.01495 ; perimeter
G1 X122.478 Y130.021 E0.00622 ; perimeter
G1 X118.552 Y130.029 E0.12309 ; perimeter
G1 X118.552 Y110.164 E0.62285 ; perimeter
G1 X120.350 Y110.172 E0.05636 ; perimeter
G1 X120.499 Y110.042 E0.00620 ; perimeter
G1 X120.888 Y109.763 E0.01501 ; perimeter
G1 X121.969 Y109.766 E0.03388 ; perimeter
G1 X122.108 Y110.293 E0.01708 ; perimeter
G1 X122.264 Y110.702 E0.01376 ; perimeter
G1 X122.518 Y111.515 E0.02670 ; perimeter
G1 X123.109 Y112.614 E0.03910 ; perimeter
G1 X123.902 Y113.575 E0.03908 ; perimeter
G1 X124.867 Y114.364 E0.03909 ; perimeter
G1 X126.221 Y115.084 E0.04807 ; perimeter
G1 X126.219 Y119.637 E0.14276 ; perimeter
G1 X126.897 Y119.636 E0.02127 ; perimeter
G1 X126.890 Y116.436 E0.10032 ; perimeter
G1 X129.062 Y116.432 E0.06809 ; perimeter
G1 X129.912 Y116.430 E0.02666 ; perimeter
G1 X129.919 Y119.629 E0.10032 ; perimeter
G1 X130.598 Y119.628 E0.02130 ; perimeter
G1 X130.584 Y115.074 E0.14277 ; perimeter
G1 X131.933 Y114.350 E0.04801 ; perimeter
G1 X132.896 Y113.557 E0.03911 ; perimeter
G1 X133.685 Y112.592 E0.03908 ; perimeter
G1 X134.270 Y111.491 E0.03909 ; perimeter
G1 X134.640 Y110.282 E0.03963 ; perimeter
G1 X134.701 Y109.904 E0.01201 ; perimeter
G1 X134.866 Y109.138 E0.02455 ; perimeter
G1 X135.022 Y108.706 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X135.949 Y109.600 E-0.31077 ; wipe and retract
G1 X136.178 Y110.020 E-0.12624 ; wipe and retract
G1 X136.255 Y110.203 E-0.05245 ; wipe and retract
G1 X142.043 Y113.013 E-1.69776 ; wipe and retract
G1 X142.235 Y112.961 E-0.05245 ; wipe and retract
G1 X142.385 Y112.935 E-0.04032 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X131.127 Y105.104 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X131.143 Y113.025 E0.24836 ; perimeter
G1 X125.652 Y113.037 E0.17217 ; perimeter
G1 X125.636 Y105.116 E0.24836 ; perimeter
G1 X131.067 Y105.104 E0.17029 ; perimeter
G1 X131.506 Y104.977 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X131.143 Y113.025 E-2.09033 ; wipe and retract
G1 X130.424 Y113.027 E-0.18967 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X138.151 Y93.474 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X139.217 Y93.476 E0.03343 ; perimeter
G1 X139.606 Y93.754 E0.01499 ; perimeter
G1 X139.756 Y93.885 E0.00623 ; perimeter
G1 X140.940 Y93.885 E0.03711 ; perimeter
G1 X141.089 Y93.754 E0.00623 ; perimeter
G1 X141.478 Y93.475 E0.01500 ; perimeter
G1 X142.766 Y93.475 E0.04037 ; perimeter
G1 X142.853 Y94.252 E0.02449 ; perimeter
G1 X142.881 Y94.746 E0.01552 ; perimeter
G1 X142.886 Y98.203 E0.10838 ; perimeter
G1 X148.738 Y98.203 E0.18347 ; perimeter
G1 X149.014 Y98.795 E0.02048 ; perimeter
G1 X149.218 Y99.086 E0.01117 ; perimeter
G1 X149.470 Y99.338 E0.01117 ; perimeter
G1 X149.762 Y99.542 E0.01117 ; perimeter
G1 X150.085 Y99.693 E0.01117 ; perimeter
G1 X150.429 Y99.785 E0.01117 ; perimeter
G1 X150.783 Y99.816 E0.01117 ; perimeter
G1 X151.138 Y99.785 E0.01117 ; perimeter
G1 X151.482 Y99.693 E0.01117 ; perimeter
G1 X151.805 Y99.542 E0.01117 ; perimeter
G1 X152.097 Y99.338 E0.01117 ; perimeter
G1 X152.349 Y99.086 E0.01117 ; perimeter
G1 X152.553 Y98.794 E0.01117 ; perimeter
G1 X152.830 Y98.202 E0.02052 ; perimeter
G1 X153.502 Y98.208 E0.02108 ; perimeter
G1 X153.918 Y98.236 E0.01308 ; perimeter
G1 X154.613 Y98.327 E0.02196 ; perimeter
G1 X154.613 Y99.374 E0.03284 ; perimeter
G1 X154.334 Y99.763 E0.01500 ; perimeter
G1 X154.204 Y99.913 E0.00623 ; perimeter
G1 X154.204 Y108.046 E0.25502 ; perimeter
G1 X154.334 Y108.196 E0.00623 ; perimeter
G1 X154.612 Y108.583 E0.01493 ; perimeter
G1 X154.631 Y109.516 E0.02926 ; perimeter
G1 X154.226 Y109.796 E0.01544 ; perimeter
G1 X153.995 Y109.930 E0.00837 ; perimeter
G1 X153.556 Y110.253 E0.01709 ; perimeter
G1 X153.172 Y110.619 E0.01665 ; perimeter
G1 X152.847 Y111.036 E0.01656 ; perimeter
G1 X152.587 Y111.495 E0.01656 ; perimeter
G1 X152.397 Y111.988 E0.01656 ; perimeter
G1 X152.324 Y112.312 E0.01042 ; perimeter
G1 X152.240 Y112.384 E0.00347 ; perimeter
G1 X152.240 Y113.675 E0.04047 ; perimeter
G1 X152.324 Y113.747 E0.00347 ; perimeter
G1 X152.397 Y114.072 E0.01042 ; perimeter
G1 X152.587 Y114.568 E0.01667 ; perimeter
G1 X152.845 Y115.049 E0.01711 ; perimeter
G1 X152.997 Y115.270 E0.00841 ; perimeter
G1 X153.307 Y115.823 E0.01987 ; perimeter
G1 X152.395 Y116.355 E0.03309 ; perimeter
G1 X151.919 Y116.308 E0.01503 ; perimeter
G1 X151.723 Y116.270 E0.00623 ; perimeter
G1 X147.466 Y118.728 E0.15413 ; perimeter
G1 X147.402 Y118.916 E0.00623 ; perimeter
G1 X147.204 Y119.352 E0.01500 ; perimeter
G1 X145.958 Y120.071 E0.04512 ; perimeter
G1 X145.858 Y119.110 E0.03030 ; perimeter
G1 X145.836 Y118.590 E0.01630 ; perimeter
G1 X145.076 Y118.591 E0.02384 ; perimeter
G1 X145.076 Y110.756 E0.24564 ; perimeter
G1 X145.524 Y108.714 E0.06554 ; perimeter
G1 X145.697 Y107.842 E0.02788 ; perimeter
G1 X145.798 Y107.145 E0.02210 ; perimeter
G1 X145.446 Y104.050 E0.09765 ; perimeter
G1 X143.606 Y104.050 E0.05768 ; perimeter
G1 X143.253 Y107.145 E0.09766 ; perimeter
G1 X143.355 Y107.842 E0.02208 ; perimeter
G1 X143.528 Y108.714 E0.02788 ; perimeter
G1 X143.976 Y110.757 E0.06556 ; perimeter
G1 X143.970 Y111.677 E0.02884 ; perimeter
G1 X143.849 Y113.016 E0.04217 ; perimeter
G1 X142.871 Y112.541 E0.03409 ; perimeter
G1 X142.643 Y112.121 E0.01500 ; perimeter
G1 X142.565 Y111.938 E0.00623 ; perimeter
G1 X136.778 Y109.127 E0.20172 ; perimeter
G1 X136.586 Y109.179 E0.00623 ; perimeter
G1 X136.115 Y109.260 E0.01499 ; perimeter
G1 X135.321 Y108.879 E0.02760 ; perimeter
G1 X134.765 Y108.675 E0.01857 ; perimeter
G1 X134.632 Y107.827 E0.02693 ; perimeter
G1 X134.260 Y106.626 E0.03943 ; perimeter
G1 X133.670 Y105.527 E0.03909 ; perimeter
G1 X132.877 Y104.566 E0.03908 ; perimeter
G1 X131.912 Y103.777 E0.03909 ; perimeter
G1 X130.811 Y103.191 E0.03909 ; perimeter
G1 X129.617 Y102.832 E0.03909 ; perimeter
G1 X128.839 Y102.757 E0.02451 ; perimeter
G1 X128.838 Y102.507 E0.00785 ; perimeter
G1 X127.913 Y102.509 E0.02903 ; perimeter
G1 X127.913 Y102.759 E0.00785 ; perimeter
G1 X127.135 Y102.838 E0.02451 ; perimeter
G1 X125.943 Y103.202 E0.03909 ; perimeter
G1 X124.845 Y103.792 E0.03909 ; perimeter
G1 X123.883 Y104.584 E0.03909 ; perimeter
G1 X123.094 Y105.549 E0.03908 ; perimeter
G1 X122.508 Y106.650 E0.03908 ; perimeter
G1 X122.147 Y107.848 E0.03925 ; perimeter
G1 X122.032 Y108.698 E0.02687 ; perimeter
G1 X121.872 Y109.393 E0.02237 ; perimeter
G1 X120.886 Y109.385 E0.03091 ; perimeter
G1 X120.499 Y109.108 E0.01494 ; perimeter
G1 X120.350 Y108.978 E0.00620 ; perimeter
G1 X118.552 Y108.986 E0.05636 ; perimeter
G1 X118.552 Y93.890 E0.47331 ; perimeter
G1 X119.804 Y93.899 E0.03924 ; perimeter
G1 X119.953 Y93.769 E0.00621 ; perimeter
G1 X120.342 Y93.490 E0.01500 ; perimeter
G1 X121.551 Y93.489 E0.03791 ; perimeter
G1 X121.676 Y94.906 E0.04459 ; perimeter
G1 X121.901 Y95.748 E0.02733 ; perimeter
G1 X122.305 Y96.610 E0.02985 ; perimeter
G1 X122.765 Y97.306 E0.02618 ; perimeter
G1 X123.382 Y97.994 E0.02899 ; perimeter
G1 X124.105 Y98.608 E0.02972 ; perimeter
G1 X124.919 Y99.140 E0.03050 ; perimeter
G1 X125.210 Y99.286 E0.01021 ; perimeter
G1 X125.811 Y99.584 E0.02103 ; perimeter
G1 X126.766 Y99.935 E0.03190 ; perimeter
G1 X127.769 Y100.189 E0.03244 ; perimeter
G1 X128.109 Y100.239 E0.01077 ; perimeter
G1 X128.804 Y100.342 E0.02204 ; perimeter
G1 X129.851 Y100.393 E0.03286 ; perimeter
G1 X130.896 Y100.342 E0.03282 ; perimeter
G1 X131.592 Y100.239 E0.02204 ; perimeter
G1 X131.932 Y100.189 E0.01077 ; perimeter
G1 X132.935 Y99.935 E0.03244 ; perimeter
G1 X133.890 Y99.584 E0.03190 ; perimeter
G1 X134.490 Y99.286 E0.02103 ; perimeter
G1 X134.782 Y99.140 E0.01021 ; perimeter
G1 X135.596 Y98.608 E0.03050 ; perimeter
G1 X136.318 Y97.994 E0.02972 ; perimeter
G1 X136.935 Y97.306 E0.02899 ; perimeter
G1 X137.396 Y96.610 E0.02618 ; perimeter
G1 X137.800 Y95.748 E0.02985 ; perimeter
G1 X138.025 Y94.906 E0.02733 ; perimeter
G1 X138.146 Y93.534 E0.04318 ; perimeter
G1 X138.172 Y93.075 F10800.000 ; move inwards before travel
G1 X137.735 Y93.044 ; move to first perimeter point
G1 F1800.000
G1 X137.722 Y94.055 E0.03171 ; perimeter
G1 X137.653 Y94.840 E0.02471 ; perimeter
G1 X137.444 Y95.622 E0.02537 ; perimeter
G1 X137.102 Y96.361 E0.02554 ; perimeter
G1 X136.637 Y97.075 E0.02671 ; perimeter
G1 X136.055 Y97.724 E0.02732 ; perimeter
G1 X135.370 Y98.306 E0.02818 ; perimeter
G1 X134.594 Y98.813 E0.02906 ; perimeter
G1 X133.741 Y99.238 E0.02990 ; perimeter
G1 X132.823 Y99.575 E0.03064 ; perimeter
G1 X131.858 Y99.819 E0.03123 ; perimeter
G1 X130.860 Y99.967 E0.03164 ; perimeter
G1 X129.851 Y100.016 E0.03166 ; perimeter
G1 X128.841 Y99.967 E0.03170 ; perimeter
G1 X127.843 Y99.819 E0.03164 ; perimeter
G1 X126.877 Y99.575 E0.03123 ; perimeter
G1 X125.960 Y99.238 E0.03064 ; perimeter
G1 X125.107 Y98.813 E0.02990 ; perimeter
G1 X124.331 Y98.306 E0.02906 ; perimeter
G1 X123.646 Y97.724 E0.02818 ; perimeter
G1 X123.064 Y97.075 E0.02732 ; perimeter
G1 X122.599 Y96.361 E0.02671 ; perimeter
G1 X122.257 Y95.622 E0.02554 ; perimeter
G1 X122.048 Y94.840 E0.02537 ; perimeter
G1 X121.979 Y94.055 E0.02471 ; perimeter
G1 X121.965 Y93.044 E0.03172 ; perimeter
G1 X122.152 Y92.039 E0.03206 ; perimeter
G1 X122.489 Y91.077 E0.03194 ; perimeter
G1 X122.952 Y90.169 E0.03196 ; perimeter
G1 X123.533 Y89.328 E0.03206 ; perimeter
G1 X124.222 Y88.568 E0.03216 ; perimeter
G1 X125.007 Y87.902 E0.03228 ; perimeter
G1 X125.874 Y87.341 E0.03238 ; perimeter
G1 X126.809 Y86.895 E0.03249 ; perimeter
G1 X127.803 Y86.576 E0.03271 ; perimeter
G1 X128.829 Y86.422 E0.03255 ; perimeter
G1 X129.809 Y86.379 E0.03073 ; perimeter
G1 X130.871 Y86.422 E0.03334 ; perimeter
G1 X131.899 Y86.576 E0.03258 ; perimeter
G1 X132.891 Y86.895 E0.03268 ; perimeter
G1 X133.827 Y87.341 E0.03250 ; perimeter
G1 X134.694 Y87.902 E0.03238 ; perimeter
G1 X135.479 Y88.568 E0.03228 ; perimeter
G1 X136.168 Y89.328 E0.03216 ; perimeter
G1 X136.749 Y90.169 E0.03206 ; perimeter
G1 X137.212 Y91.077 E0.03196 ; perimeter
G1 X137.549 Y92.039 E0.03194 ; perimeter
G1 X137.724 Y92.985 E0.03017 ; perimeter
G1 X138.096 Y93.216 F10800.000 ; move inwards before travel
G1 X138.208 Y92.972 ; move to first perimeter point
G1 F1800.000
G1 X138.191 Y92.318 E0.02053 ; perimeter
G1 X138.202 Y91.922 E0.01242 ; perimeter
G1 X137.222 Y87.704 E0.13578 ; perimeter
G1 X135.247 Y86.876 E0.06713 ; perimeter
G1 X134.541 Y86.648 E0.02326 ; perimeter
G1 X133.729 Y86.449 E0.02623 ; perimeter
G1 X132.831 Y86.286 E0.02861 ; perimeter
G1 X131.862 Y86.159 E0.03064 ; perimeter
G1 X130.862 Y86.044 E0.03158 ; perimeter
G1 X129.850 Y86.001 E0.03174 ; perimeter
G1 X128.839 Y86.044 E0.03174 ; perimeter
G1 X127.838 Y86.159 E0.03158 ; perimeter
G1 X126.870 Y86.285 E0.03064 ; perimeter
G1 X125.972 Y86.448 E0.02861 ; perimeter
G1 X125.159 Y86.648 E0.02623 ; perimeter
G1 X124.453 Y86.875 E0.02326 ; perimeter
G1 X122.479 Y87.703 E0.06711 ; perimeter
G1 X121.499 Y91.921 E0.13580 ; perimeter
G1 X121.511 Y92.325 E0.01265 ; perimeter
G1 X121.491 Y93.113 E0.02473 ; perimeter
G1 X120.342 Y93.113 E0.03603 ; perimeter
G1 X119.953 Y92.834 E0.01500 ; perimeter
G1 X119.804 Y92.704 E0.00621 ; perimeter
G1 X118.552 Y92.713 E0.03924 ; perimeter
G1 X118.552 Y75.305 E0.54583 ; perimeter
G1 X140.975 Y75.305 E0.70304 ; perimeter
G1 X142.329 Y73.951 E0.06004 ; perimeter
G1 X142.329 Y68.805 E0.16135 ; perimeter
G1 X157.924 Y68.805 E0.48896 ; perimeter
G1 X157.915 Y70.874 E0.06487 ; perimeter
G1 X158.046 Y71.023 E0.00621 ; perimeter
G1 X158.324 Y71.412 E0.01500 ; perimeter
G1 X158.324 Y73.082 E0.05238 ; perimeter
G1 X157.570 Y73.171 E0.02380 ; perimeter
G1 X157.098 Y73.199 E0.01485 ; perimeter
G1 X154.797 Y73.204 E0.07212 ; perimeter
G1 X154.052 Y73.242 E0.02341 ; perimeter
G1 X153.337 Y73.352 E0.02269 ; perimeter
G1 X153.058 Y73.426 E0.00905 ; perimeter
G1 X149.730 Y73.789 E0.10495 ; perimeter
G1 X148.852 Y73.903 E0.02776 ; perimeter
G1 X148.528 Y73.967 E0.01036 ; perimeter
G1 X145.779 Y73.967 E0.08619 ; perimeter
G1 X145.779 Y74.601 E0.01987 ; perimeter
G1 X148.528 Y74.601 E0.08619 ; perimeter
G1 X148.852 Y74.664 E0.01036 ; perimeter
G1 X149.730 Y74.778 E0.02775 ; perimeter
G1 X153.058 Y75.142 E0.10495 ; perimeter
G1 X153.337 Y75.216 E0.00905 ; perimeter
G1 X154.052 Y75.326 E0.02269 ; perimeter
G1 X154.797 Y75.364 E0.02341 ; perimeter
G1 X157.153 Y75.369 E0.07385 ; perimeter
G1 X157.636 Y75.397 E0.01519 ; perimeter
G1 X158.402 Y75.485 E0.02415 ; perimeter
G1 X158.402 Y77.882 E0.07514 ; perimeter
G1 X158.123 Y78.270 E0.01500 ; perimeter
G1 X157.992 Y78.420 E0.00623 ; perimeter
G1 X157.992 Y81.564 E0.09856 ; perimeter
G1 X158.123 Y81.714 E0.00623 ; perimeter
G1 X158.402 Y82.103 E0.01500 ; perimeter
G1 X158.402 Y83.223 E0.03512 ; perimeter
G1 X157.617 Y83.310 E0.02474 ; perimeter
G1 X156.630 Y83.343 E0.03098 ; perimeter
G1 X142.887 Y83.343 E0.43091 ; perimeter
G1 X142.886 Y91.312 E0.24986 ; perimeter
G1 X142.854 Y92.309 E0.03128 ; perimeter
G1 X142.766 Y93.098 E0.02489 ; perimeter
G1 X141.478 Y93.098 E0.04038 ; perimeter
G1 X141.089 Y92.820 E0.01500 ; perimeter
G1 X140.940 Y92.689 E0.00623 ; perimeter
G1 X139.756 Y92.689 E0.03711 ; perimeter
G1 X139.606 Y92.820 E0.00623 ; perimeter
G1 X139.217 Y93.098 E0.01500 ; perimeter
G1 X138.211 Y93.098 E0.03155 ; perimeter
G1 X138.209 Y93.032 E0.00208 ; perimeter
G1 X137.808 Y92.963 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X138.191 Y92.318 E-0.18861 ; wipe and retract
G1 X138.202 Y91.922 E-0.10454 ; wipe and retract
G1 X137.222 Y87.704 E-1.14276 ; wipe and retract
G1 X135.247 Y86.876 E-0.56495 ; wipe and retract
G1 X134.541 Y86.648 E-0.19577 ; wipe and retract
G1 X134.234 Y86.573 E-0.08337 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.802 Y89.126 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X158.714 Y88.361 E0.02414 ; perimeter
G1 X158.686 Y87.878 E0.01519 ; perimeter
G1 X158.685 Y84.093 E0.11866 ; perimeter
G1 X158.710 Y83.609 E0.01521 ; perimeter
G1 X158.767 Y83.141 E0.01477 ; perimeter
G1 X158.780 Y82.101 E0.03261 ; perimeter
G1 X159.057 Y81.714 E0.01495 ; perimeter
G1 X159.188 Y81.564 E0.00623 ; perimeter
G1 X159.188 Y78.420 E0.09856 ; perimeter
G1 X159.057 Y78.270 E0.00623 ; perimeter
G1 X158.779 Y77.882 E0.01500 ; perimeter
G1 X158.779 Y75.484 E0.07517 ; perimeter
G1 X159.568 Y75.397 E0.02490 ; perimeter
G1 X160.566 Y75.364 E0.03129 ; perimeter
G1 X169.169 Y75.364 E0.26976 ; perimeter
G1 X169.206 Y75.184 E0.00574 ; perimeter
G1 X169.206 Y73.383 E0.05647 ; perimeter
G1 X169.169 Y73.204 E0.00574 ; perimeter
G1 X160.499 Y73.204 E0.27184 ; perimeter
G1 X159.495 Y73.171 E0.03152 ; perimeter
G1 X158.701 Y73.084 E0.02502 ; perimeter
G1 X158.701 Y71.412 E0.05242 ; perimeter
G1 X158.980 Y71.023 E0.01500 ; perimeter
G1 X159.110 Y70.874 E0.00621 ; perimeter
G1 X159.102 Y68.805 E0.06487 ; perimeter
G1 X171.225 Y68.805 E0.38010 ; perimeter
G1 X171.859 Y68.855 E0.01994 ; perimeter
G1 X172.378 Y68.979 E0.01674 ; perimeter
G1 X172.871 Y69.183 E0.01674 ; perimeter
G1 X173.326 Y69.462 E0.01674 ; perimeter
G1 X173.732 Y69.809 E0.01674 ; perimeter
G1 X174.079 Y70.215 E0.01674 ; perimeter
G1 X174.358 Y70.670 E0.01674 ; perimeter
G1 X174.562 Y71.163 E0.01674 ; perimeter
G1 X174.687 Y71.682 E0.01674 ; perimeter
G1 X174.737 Y72.316 E0.01994 ; perimeter
G1 X174.737 Y83.366 E0.34646 ; perimeter
G1 X174.230 Y83.576 E0.01719 ; perimeter
G1 X171.662 Y80.997 E0.11414 ; perimeter
G1 X171.464 Y80.983 E0.00622 ; perimeter
G1 X170.992 Y80.905 E0.01500 ; perimeter
G1 X170.146 Y80.060 E0.03750 ; perimeter
G1 X170.472 Y79.554 E0.01888 ; perimeter
G1 X170.682 Y79.284 E0.01072 ; perimeter
G1 X171.191 Y78.720 E0.02381 ; perimeter
G1 X170.802 Y78.190 E0.02061 ; perimeter
G1 X169.208 Y78.940 E0.05524 ; perimeter
G1 X168.094 Y79.437 E0.03827 ; perimeter
G1 X166.040 Y80.941 E0.07980 ; perimeter
G1 X166.411 Y81.448 E0.01970 ; perimeter
G1 X164.478 Y82.863 E0.07511 ; perimeter
G1 X164.279 Y83.036 E0.00828 ; perimeter
G1 X163.915 Y83.439 E0.01704 ; perimeter
G1 X163.740 Y83.696 E0.00973 ; perimeter
G1 X163.511 Y84.130 E0.01538 ; perimeter
G1 X163.338 Y84.642 E0.01695 ; perimeter
G1 X163.283 Y84.906 E0.00846 ; perimeter
G1 X163.242 Y85.423 E0.01626 ; perimeter
G1 X163.239 Y87.847 E0.07599 ; perimeter
G1 X163.211 Y88.345 E0.01565 ; perimeter
G1 X163.124 Y89.126 E0.02464 ; perimeter
G1 X162.087 Y89.126 E0.03251 ; perimeter
G1 X161.699 Y88.848 E0.01500 ; perimeter
G1 X161.549 Y88.717 E0.00622 ; perimeter
G1 X160.185 Y88.717 E0.04277 ; perimeter
G1 X160.035 Y88.848 E0.00622 ; perimeter
G1 X159.646 Y89.126 E0.01500 ; perimeter
G1 X158.862 Y89.126 E0.02461 ; perimeter
G1 X158.406 Y89.186 F10800.000 ; move inwards before travel
G1 X158.862 Y89.503 ; move to first perimeter point
G1 F1800.000
G1 X159.646 Y89.503 E0.02461 ; perimeter
G1 X160.035 Y89.782 E0.01500 ; perimeter
G1 X160.185 Y89.912 E0.00622 ; perimeter
G1 X161.549 Y89.912 E0.04277 ; perimeter
G1 X161.699 Y89.782 E0.00622 ; perimeter
G1 X162.087 Y89.503 E0.01500 ; perimeter
G1 X163.125 Y89.503 E0.03254 ; perimeter
G1 X163.213 Y90.297 E0.02503 ; perimeter
G1 X163.238 Y90.987 E0.02165 ; perimeter
G1 X163.820 Y90.987 E0.01824 ; perimeter
G1 X163.821 Y85.447 E0.17372 ; perimeter
G1 X163.859 Y84.989 E0.01440 ; perimeter
G1 X163.903 Y84.777 E0.00679 ; perimeter
G1 X163.984 Y84.515 E0.00861 ; perimeter
G1 X164.140 Y84.161 E0.01211 ; perimeter
G1 X164.376 Y83.794 E0.01368 ; perimeter
G1 X164.523 Y83.618 E0.00719 ; perimeter
G1 X164.838 Y83.322 E0.01355 ; perimeter
G1 X166.755 Y81.918 E0.07451 ; perimeter
G1 X167.128 Y82.427 E0.01978 ; perimeter
G1 X169.208 Y80.924 E0.08048 ; perimeter
G1 X169.890 Y80.336 E0.02820 ; perimeter
G1 X170.725 Y81.172 E0.03704 ; perimeter
G1 X170.803 Y81.644 E0.01500 ; perimeter
G1 X170.817 Y81.842 E0.00622 ; perimeter
G1 X174.737 Y85.751 E0.17358 ; perimeter
G1 X174.737 Y97.602 E0.37159 ; perimeter
G1 X170.360 Y97.594 E0.13723 ; perimeter
G1 X170.210 Y97.725 E0.00622 ; perimeter
G1 X169.821 Y98.003 E0.01500 ; perimeter
G1 X168.879 Y98.003 E0.02954 ; perimeter
G1 X168.791 Y97.259 E0.02351 ; perimeter
G1 X168.763 Y96.794 E0.01458 ; perimeter
G1 X168.758 Y94.844 E0.06115 ; perimeter
G1 X167.704 Y94.844 E0.03304 ; perimeter
G1 X167.704 Y105.267 E0.32681 ; perimeter
G1 X167.671 Y106.255 E0.03099 ; perimeter
G1 X167.584 Y107.039 E0.02474 ; perimeter
G1 X163.788 Y107.039 E0.11900 ; perimeter
G1 X163.700 Y106.255 E0.02474 ; perimeter
G1 X163.668 Y105.267 E0.03099 ; perimeter
G1 X163.667 Y94.844 E0.32681 ; perimeter
G1 X162.614 Y94.844 E0.03302 ; perimeter
G1 X162.614 Y126.168 E0.98213 ; perimeter
G1 X161.830 Y126.168 E0.02458 ; perimeter
G1 X161.808 Y126.685 E0.01623 ; perimeter
G1 X161.720 Y127.435 E0.02367 ; perimeter
G1 X160.231 Y127.435 E0.04668 ; perimeter
G1 X159.842 Y127.156 E0.01500 ; perimeter
G1 X159.692 Y127.025 E0.00623 ; perimeter
G1 X158.509 Y127.025 E0.03711 ; perimeter
G1 X158.359 Y127.156 E0.00623 ; perimeter
G1 X157.970 Y127.435 E0.01500 ; perimeter
G1 X157.161 Y127.435 E0.02536 ; perimeter
G1 X156.806 Y126.565 E0.02946 ; perimeter
G1 X156.557 Y126.079 E0.01711 ; perimeter
G1 X156.252 Y125.647 E0.01660 ; perimeter
G1 X155.888 Y125.264 E0.01656 ; perimeter
G1 X155.471 Y124.939 E0.01656 ; perimeter
G1 X155.012 Y124.679 E0.01656 ; perimeter
G1 X154.519 Y124.489 E0.01656 ; perimeter
G1 X154.195 Y124.416 E0.01042 ; perimeter
G1 X154.123 Y124.333 E0.00346 ; perimeter
G1 X152.832 Y124.333 E0.04047 ; perimeter
G1 X152.760 Y124.416 E0.00346 ; perimeter
G1 X152.436 Y124.489 E0.01042 ; perimeter
G1 X151.943 Y124.679 E0.01656 ; perimeter
G1 X151.483 Y124.940 E0.01656 ; perimeter
G1 X151.067 Y125.265 E0.01656 ; perimeter
G1 X150.703 Y125.647 E0.01656 ; perimeter
G1 X150.398 Y126.080 E0.01660 ; perimeter
G1 X150.149 Y126.565 E0.01711 ; perimeter
G1 X149.795 Y127.435 E0.02945 ; perimeter
G1 X148.951 Y127.435 E0.02646 ; perimeter
G1 X148.562 Y127.156 E0.01500 ; perimeter
G1 X148.412 Y127.025 E0.00623 ; perimeter
G1 X147.229 Y127.025 E0.03711 ; perimeter
G1 X147.079 Y127.156 E0.00623 ; perimeter
G1 X146.690 Y127.435 E0.01500 ; perimeter
G1 X145.946 Y127.435 E0.02334 ; perimeter
G1 X145.858 Y126.645 E0.02492 ; perimeter
G1 X145.825 Y125.646 E0.03133 ; perimeter
G1 X145.826 Y121.690 E0.12404 ; perimeter
G1 X145.870 Y120.476 E0.03807 ; perimeter
G1 X146.493 Y120.194 E0.02146 ; perimeter
G1 X147.393 Y119.678 E0.03252 ; perimeter
G1 X147.869 Y119.725 E0.01499 ; perimeter
G1 X148.064 Y119.763 E0.00623 ; perimeter
G1 X152.321 Y117.305 E0.15413 ; perimeter
G1 X152.386 Y117.117 E0.00623 ; perimeter
G1 X152.583 Y116.682 E0.01499 ; perimeter
G1 X153.100 Y116.381 E0.01876 ; perimeter
G1 X153.680 Y116.000 E0.02174 ; perimeter
G1 X154.442 Y116.345 E0.02625 ; perimeter
G1 X154.958 Y116.511 E0.01698 ; perimeter
G1 X155.479 Y116.601 E0.01660 ; perimeter
G1 X156.007 Y116.614 E0.01656 ; perimeter
G1 X156.531 Y116.549 E0.01656 ; perimeter
G1 X157.040 Y116.409 E0.01656 ; perimeter
G1 X157.521 Y116.195 E0.01649 ; perimeter
G1 X157.953 Y115.910 E0.01625 ; perimeter
G1 X157.960 Y115.738 E0.00539 ; perimeter
G1 X157.218 Y114.996 E0.03288 ; perimeter
G1 X156.754 Y115.258 E0.01670 ; perimeter
G1 X156.302 Y115.395 E0.01483 ; perimeter
G1 X155.831 Y115.442 E0.01483 ; perimeter
G1 X155.361 Y115.395 E0.01483 ; perimeter
G1 X154.908 Y115.258 E0.01483 ; perimeter
G1 X154.491 Y115.035 E0.01482 ; perimeter
G1 X154.126 Y114.735 E0.01483 ; perimeter
G1 X153.826 Y114.370 E0.01483 ; perimeter
G1 X153.603 Y113.953 E0.01483 ; perimeter
G1 X153.465 Y113.500 E0.01483 ; perimeter
G1 X153.420 Y113.032 E0.01474 ; perimeter
G1 X153.465 Y112.559 E0.01490 ; perimeter
G1 X153.604 Y112.105 E0.01491 ; perimeter
G1 X153.825 Y111.690 E0.01475 ; perimeter
G1 X154.125 Y111.324 E0.01483 ; perimeter
G1 X154.491 Y111.024 E0.01483 ; perimeter
G1 X154.908 Y110.801 E0.01483 ; perimeter
G1 X155.360 Y110.664 E0.01483 ; perimeter
G1 X155.831 Y110.618 E0.01483 ; perimeter
G1 X156.301 Y110.664 E0.01482 ; perimeter
G1 X156.754 Y110.801 E0.01483 ; perimeter
G1 X157.218 Y111.063 E0.01670 ; perimeter
G1 X157.959 Y110.321 E0.03288 ; perimeter
G1 X157.953 Y110.149 E0.00539 ; perimeter
G1 X157.521 Y109.863 E0.01625 ; perimeter
G1 X157.040 Y109.650 E0.01649 ; perimeter
G1 X156.529 Y109.509 E0.01661 ; perimeter
G1 X155.986 Y109.437 E0.01720 ; perimeter
G1 X154.990 Y109.395 E0.03126 ; perimeter
G1 X154.990 Y108.585 E0.02541 ; perimeter
G1 X155.269 Y108.196 E0.01500 ; perimeter
G1 X155.399 Y108.046 E0.00623 ; perimeter
G1 X155.399 Y99.913 E0.25502 ; perimeter
G1 X155.269 Y99.763 E0.00623 ; perimeter
G1 X154.990 Y99.374 E0.01500 ; perimeter
G1 X154.990 Y98.324 E0.03293 ; perimeter
G1 X155.757 Y98.236 E0.02421 ; perimeter
G1 X156.242 Y98.208 E0.01524 ; perimeter
G1 X158.680 Y98.203 E0.07644 ; perimeter
G1 X158.686 Y90.786 E0.23254 ; perimeter
G1 X158.714 Y90.286 E0.01571 ; perimeter
G1 X158.802 Y89.503 E0.02470 ; perimeter
G1 X158.880 Y89.104 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X159.646 Y89.503 E-0.22297 ; wipe and retract
G1 X160.035 Y89.782 E-0.12624 ; wipe and retract
G1 X160.185 Y89.912 E-0.05238 ; wipe and retract
G1 X161.549 Y89.912 E-0.35994 ; wipe and retract
G1 X161.699 Y89.782 E-0.05238 ; wipe and retract
G1 X162.087 Y89.503 E-0.12624 ; wipe and retract
G1 X163.125 Y89.503 E-0.27386 ; wipe and retract
G1 X163.213 Y90.297 E-0.21068 ; wipe and retract
G1 X163.238 Y90.987 E-0.18223 ; wipe and retract
G1 X163.820 Y90.987 E-0.15348 ; wipe and retract
G1 X163.820 Y89.018 E-0.51960 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.878 Y98.380 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X169.821 Y98.380 E0.02958 ; perimeter
G1 X170.210 Y98.659 E0.01500 ; perimeter
G1 X170.360 Y98.790 E0.00622 ; perimeter
G1 X174.737 Y98.782 E0.13723 ; perimeter
G1 X174.737 Y130.586 E0.99719 ; perimeter
G1 X171.164 Y130.578 E0.11202 ; perimeter
G1 X171.014 Y130.708 E0.00622 ; perimeter
G1 X170.625 Y130.987 E0.01500 ; perimeter
G1 X169.651 Y130.987 E0.03056 ; perimeter
G1 X169.563 Y130.201 E0.02479 ; perimeter
G1 X169.535 Y129.698 E0.01580 ; perimeter
G1 X169.530 Y126.168 E0.11068 ; perimeter
G1 X168.757 Y126.168 E0.02424 ; perimeter
G1 X168.758 Y100.165 E0.81530 ; perimeter
G1 X168.790 Y99.169 E0.03124 ; perimeter
G1 X168.871 Y98.440 E0.02299 ; perimeter
G1 X168.887 Y97.981 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X169.821 Y98.380 E-0.25123 ; wipe and retract
G1 X170.210 Y98.659 E-0.12624 ; wipe and retract
G1 X170.360 Y98.790 E-0.05237 ; wipe and retract
G1 X174.737 Y98.782 E-1.15494 ; wipe and retract
G1 X174.737 Y101.416 E-0.69522 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X167.583 Y107.416 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X167.671 Y108.200 E0.02472 ; perimeter
G1 X167.704 Y109.186 E0.03094 ; perimeter
G1 X167.704 Y126.168 E0.53244 ; perimeter
G1 X166.932 Y126.168 E0.02423 ; perimeter
G1 X166.931 Y137.587 E0.35805 ; perimeter
G1 X169.530 Y137.587 E0.08148 ; perimeter
G1 X169.535 Y132.626 E0.15555 ; perimeter
G1 X169.563 Y132.136 E0.01540 ; perimeter
G1 X169.651 Y131.364 E0.02437 ; perimeter
G1 X170.625 Y131.364 E0.03055 ; perimeter
G1 X171.014 Y131.642 E0.01500 ; perimeter
G1 X171.164 Y131.773 E0.00622 ; perimeter
G1 X174.737 Y131.765 E0.11202 ; perimeter
G1 X174.737 Y137.684 E0.18558 ; perimeter
G1 X174.687 Y138.318 E0.01994 ; perimeter
G1 X174.562 Y138.837 E0.01674 ; perimeter
G1 X174.358 Y139.330 E0.01674 ; perimeter
G1 X174.079 Y139.785 E0.01674 ; perimeter
G1 X173.732 Y140.191 E0.01674 ; perimeter
G1 X173.326 Y140.538 E0.01674 ; perimeter
G1 X172.871 Y140.817 E0.01674 ; perimeter
G1 X172.378 Y141.021 E0.01674 ; perimeter
G1 X171.859 Y141.145 E0.01674 ; perimeter
G1 X171.225 Y141.195 E0.01994 ; perimeter
G1 X150.960 Y141.195 E0.63538 ; perimeter
G1 X150.968 Y137.530 E0.11494 ; perimeter
G1 X150.838 Y137.380 E0.00622 ; perimeter
G1 X150.559 Y136.991 E0.01500 ; perimeter
G1 X150.559 Y136.156 E0.02617 ; perimeter
G1 X150.677 Y136.129 E0.00377 ; perimeter
G1 X150.874 Y135.243 E0.02848 ; perimeter
G1 X152.378 Y135.240 E0.04717 ; perimeter
G1 X152.578 Y136.015 E0.02509 ; perimeter
G1 X153.033 Y136.015 E0.01426 ; perimeter
G1 X153.233 Y135.241 E0.02508 ; perimeter
G1 X154.479 Y135.241 E0.03904 ; perimeter
G1 X154.679 Y136.015 E0.02508 ; perimeter
G1 X155.084 Y136.015 E0.01272 ; perimeter
G1 X155.287 Y135.241 E0.02510 ; perimeter
G1 X156.472 Y135.262 E0.03715 ; perimeter
G1 X156.683 Y136.016 E0.02456 ; perimeter
G1 X156.950 Y136.017 E0.00838 ; perimeter
G1 X157.037 Y135.022 E0.03133 ; perimeter
G1 X158.130 Y135.022 E0.03426 ; perimeter
G1 X158.519 Y135.300 E0.01500 ; perimeter
G1 X158.669 Y135.431 E0.00623 ; perimeter
G1 X160.352 Y135.431 E0.05279 ; perimeter
G1 X160.502 Y135.300 E0.00623 ; perimeter
G1 X160.891 Y135.022 E0.01500 ; perimeter
G1 X161.718 Y135.022 E0.02595 ; perimeter
G1 X161.808 Y135.741 E0.02272 ; perimeter
G1 X161.836 Y136.181 E0.01383 ; perimeter
G1 X161.841 Y137.587 E0.04409 ; perimeter
G1 X164.440 Y137.587 E0.08150 ; perimeter
G1 X164.440 Y126.168 E0.35805 ; perimeter
G1 X163.667 Y126.168 E0.02423 ; perimeter
G1 X163.668 Y109.186 E0.53244 ; perimeter
G1 X163.700 Y108.200 E0.03094 ; perimeter
G1 X163.788 Y107.416 E0.02472 ; perimeter
G1 X167.523 Y107.416 E0.11712 ; perimeter
G1 X167.980 Y107.360 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X167.671 Y108.200 E-0.21041 ; wipe and retract
G1 X167.704 Y109.186 E-0.26041 ; wipe and retract
G1 X167.704 Y116.042 E-1.80917 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X133.177 Y127.634 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X133.591 Y128.409 E0.02758 ; perimeter
G1 X133.847 Y129.251 E0.02758 ; perimeter
G1 X133.933 Y130.126 E0.02758 ; perimeter
G1 X133.847 Y131.002 E0.02758 ; perimeter
G1 X133.591 Y131.843 E0.02758 ; perimeter
G1 X133.177 Y132.619 E0.02758 ; perimeter
G1 X132.618 Y133.299 E0.02758 ; perimeter
G1 X131.938 Y133.857 E0.02759 ; perimeter
G1 X131.162 Y134.272 E0.02759 ; perimeter
G1 X130.320 Y134.527 E0.02759 ; perimeter
G1 X129.444 Y134.613 E0.02759 ; perimeter
G1 X128.569 Y134.527 E0.02759 ; perimeter
G1 X127.726 Y134.272 E0.02759 ; perimeter
G1 X126.950 Y133.857 E0.02759 ; perimeter
G1 X126.270 Y133.299 E0.02759 ; perimeter
G1 X125.712 Y132.619 E0.02758 ; perimeter
G1 X125.297 Y131.843 E0.02758 ; perimeter
G1 X125.042 Y131.002 E0.02758 ; perimeter
G1 X124.956 Y130.126 E0.02758 ; perimeter
G1 X125.042 Y129.251 E0.02758 ; perimeter
G1 X125.297 Y128.409 E0.02758 ; perimeter
G1 X125.712 Y127.634 E0.02758 ; perimeter
G1 X126.270 Y126.954 E0.02758 ; perimeter
G1 X126.950 Y126.396 E0.02759 ; perimeter
G1 X127.726 Y125.981 E0.02759 ; perimeter
G1 X128.569 Y125.726 E0.02759 ; perimeter
G1 X129.444 Y125.639 E0.02759 ; perimeter
G1 X130.320 Y125.726 E0.02759 ; perimeter
G1 X131.162 Y125.981 E0.02759 ; perimeter
G1 X131.938 Y126.396 E0.02759 ; perimeter
G1 X132.618 Y126.954 E0.02759 ; perimeter
G1 X133.139 Y127.587 E0.02570 ; perimeter
G1 X133.576 Y127.607 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X133.591 Y128.409 E-0.24767 ; wipe and retract
G1 X133.847 Y129.251 E-0.23211 ; wipe and retract
G1 X133.933 Y130.126 E-0.23210 ; wipe and retract
G1 X133.847 Y131.002 E-0.23210 ; wipe and retract
G1 X133.591 Y131.843 E-0.23211 ; wipe and retract
G1 X133.177 Y132.619 E-0.23213 ; wipe and retract
G1 X132.618 Y133.299 E-0.23215 ; wipe and retract
G1 X131.938 Y133.857 E-0.23217 ; wipe and retract
G1 X131.162 Y134.272 E-0.23220 ; wipe and retract
G1 X130.527 Y134.464 E-0.17526 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X133.700 Y133.285 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X134.368 Y133.455 E0.02162 ; perimeter
G1 X134.948 Y133.555 E0.01844 ; perimeter
G1 X135.284 Y133.896 E0.01500 ; perimeter
G1 X135.409 Y134.050 E0.00623 ; perimeter
G1 X141.877 Y135.166 E0.20580 ; perimeter
G1 X142.047 Y135.062 E0.00623 ; perimeter
G1 X142.477 Y134.854 E0.01497 ; perimeter
G1 X143.715 Y135.059 E0.03935 ; perimeter
G1 X143.793 Y136.017 E0.03015 ; perimeter
G1 X144.059 Y136.016 E0.00833 ; perimeter
G1 X144.270 Y135.262 E0.02456 ; perimeter
G1 X145.455 Y135.241 E0.03715 ; perimeter
G1 X145.657 Y136.015 E0.02510 ; perimeter
G1 X146.063 Y136.015 E0.01272 ; perimeter
G1 X146.263 Y135.241 E0.02508 ; perimeter
G1 X147.508 Y135.241 E0.03904 ; perimeter
G1 X147.708 Y136.015 E0.02508 ; perimeter
G1 X148.163 Y136.015 E0.01426 ; perimeter
G1 X148.363 Y135.240 E0.02509 ; perimeter
G1 X149.868 Y135.243 E0.04717 ; perimeter
G1 X150.065 Y136.129 E0.02848 ; perimeter
G1 X150.182 Y136.156 E0.00377 ; perimeter
G1 X150.182 Y136.991 E0.02617 ; perimeter
G1 X149.904 Y137.380 E0.01500 ; perimeter
G1 X149.773 Y137.530 E0.00622 ; perimeter
G1 X149.781 Y141.195 E0.11494 ; perimeter
G1 X122.064 Y141.195 E0.86905 ; perimeter
G1 X121.430 Y141.145 E0.01994 ; perimeter
G1 X120.911 Y141.021 E0.01674 ; perimeter
G1 X120.418 Y140.817 E0.01674 ; perimeter
G1 X119.962 Y140.537 E0.01678 ; perimeter
G1 X119.525 Y140.154 E0.01820 ; perimeter
G1 X119.210 Y139.785 E0.01522 ; perimeter
G1 X118.931 Y139.330 E0.01674 ; perimeter
G1 X118.727 Y138.837 E0.01674 ; perimeter
G1 X118.602 Y138.318 E0.01674 ; perimeter
G1 X118.552 Y137.684 E0.01994 ; perimeter
G1 X118.552 Y131.208 E0.20304 ; perimeter
G1 X122.478 Y131.216 E0.12309 ; perimeter
G1 X122.628 Y131.086 E0.00622 ; perimeter
G1 X123.017 Y130.807 E0.01500 ; perimeter
G1 X124.107 Y130.808 E0.03419 ; perimeter
G1 X124.361 Y131.463 E0.02201 ; perimeter
G1 X124.584 Y132.134 E0.02218 ; perimeter
G1 X125.073 Y133.046 E0.03243 ; perimeter
G1 X125.727 Y133.843 E0.03231 ; perimeter
G1 X126.523 Y134.496 E0.03231 ; perimeter
G1 X127.432 Y134.982 E0.03231 ; perimeter
G1 X128.419 Y135.281 E0.03232 ; perimeter
G1 X129.444 Y135.382 E0.03232 ; perimeter
G1 X130.470 Y135.281 E0.03232 ; perimeter
G1 X131.456 Y134.982 E0.03232 ; perimeter
G1 X132.366 Y134.496 E0.03234 ; perimeter
G1 X133.179 Y133.839 E0.03278 ; perimeter
G1 X133.659 Y133.329 E0.02196 ; perimeter
G1 X133.872 Y132.924 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X134.368 Y133.455 E-0.19012 ; wipe and retract
G1 X134.948 Y133.555 E-0.15520 ; wipe and retract
G1 X135.284 Y133.896 E-0.12624 ; wipe and retract
G1 X135.409 Y134.050 E-0.05246 ; wipe and retract
G1 X141.877 Y135.166 E-1.73205 ; wipe and retract
G1 X141.955 Y135.119 E-0.02393 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X121.147 Y142.932 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X120.352 Y142.741 E0.02564 ; perimeter
G1 X119.597 Y142.428 E0.02564 ; perimeter
G1 X118.900 Y142.001 E0.02564 ; perimeter
G1 X118.278 Y141.470 E0.02564 ; perimeter
G1 X117.747 Y140.848 E0.02564 ; perimeter
G1 X117.320 Y140.151 E0.02564 ; perimeter
G1 X117.007 Y139.395 E0.02564 ; perimeter
G1 X116.816 Y138.600 E0.02564 ; perimeter
G1 X116.749 Y137.754 E0.02661 ; perimeter
G1 X116.749 Y72.246 E2.05398 ; perimeter
G1 X116.816 Y71.400 E0.02661 ; perimeter
G1 X117.007 Y70.605 E0.02564 ; perimeter
G1 X117.320 Y69.849 E0.02564 ; perimeter
G1 X117.747 Y69.152 E0.02564 ; perimeter
G1 X118.278 Y68.530 E0.02564 ; perimeter
G1 X118.900 Y67.999 E0.02564 ; perimeter
G1 X119.597 Y67.572 E0.02564 ; perimeter
G1 X120.352 Y67.259 E0.02564 ; perimeter
G1 X121.147 Y67.068 E0.02564 ; perimeter
G1 X121.993 Y67.002 E0.02661 ; perimeter
G1 X171.350 Y67.006 E1.54756 ; perimeter
G1 X172.142 Y67.068 E0.02489 ; perimeter
G1 X172.937 Y67.259 E0.02564 ; perimeter
G1 X173.692 Y67.572 E0.02564 ; perimeter
G1 X174.389 Y67.999 E0.02564 ; perimeter
G1 X175.011 Y68.530 E0.02564 ; perimeter
G1 X175.542 Y69.152 E0.02564 ; perimeter
G1 X175.969 Y69.849 E0.02564 ; perimeter
G1 X176.282 Y70.605 E0.02564 ; perimeter
G1 X176.473 Y71.400 E0.02564 ; perimeter
G1 X176.539 Y72.246 E0.02661 ; perimeter
G1 X176.539 Y137.754 E2.05398 ; perimeter
G1 X176.473 Y138.600 E0.02661 ; perimeter
G1 X176.282 Y139.395 E0.02564 ; perimeter
G1 X175.969 Y140.151 E0.02564 ; perimeter
G1 X175.542 Y140.848 E0.02564 ; perimeter
G1 X175.011 Y141.470 E0.02564 ; perimeter
G1 X174.389 Y142.001 E0.02564 ; perimeter
G1 X173.692 Y142.428 E0.02564 ; perimeter
G1 X172.937 Y142.741 E0.02564 ; perimeter
G1 X172.142 Y142.932 E0.02564 ; perimeter
G1 X171.296 Y142.998 E0.02661 ; perimeter
G1 X121.993 Y142.998 E1.54584 ; perimeter
G1 X121.207 Y142.936 E0.02473 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X120.352 Y142.741 E-0.23142 ; wipe and retract
G1 X119.597 Y142.428 E-0.21576 ; wipe and retract
G1 X118.900 Y142.001 E-0.21576 ; wipe and retract
G1 X118.278 Y141.470 E-0.21576 ; wipe and retract
G1 X117.747 Y140.848 E-0.21576 ; wipe and retract
G1 X117.320 Y140.151 E-0.21576 ; wipe and retract
G1 X117.007 Y139.395 E-0.21576 ; wipe and retract
G1 X116.816 Y138.600 E-0.21576 ; wipe and retract
G1 X116.749 Y137.754 E-0.22395 ; wipe and retract
G1 X116.749 Y136.563 E-0.31431 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X122.067 Y91.143 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X122.803 Y87.976 E0.10194 ; perimeter
G1 X124.584 Y87.229 E0.06056 ; perimeter
G1 X125.262 Y87.011 E0.02234 ; perimeter
G1 X126.125 Y86.804 E0.02780 ; perimeter
G1 X125.690 Y87.011 E0.01510 ; perimeter
G1 X124.781 Y87.598 E0.03391 ; perimeter
G1 X123.959 Y88.296 E0.03382 ; perimeter
G1 X123.237 Y89.093 E0.03372 ; perimeter
G1 X122.627 Y89.976 E0.03362 ; perimeter
G1 X122.142 Y90.929 E0.03354 ; perimeter
G1 X122.087 Y91.086 E0.00523 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X122.803 Y87.976 E-0.84219 ; wipe and retract
G1 X124.584 Y87.229 E-0.50966 ; wipe and retract
G1 X125.262 Y87.011 E-0.18801 ; wipe and retract
G1 X126.125 Y86.804 E-0.23401 ; wipe and retract
G1 X125.690 Y87.011 E-0.12712 ; wipe and retract
G1 X124.781 Y87.598 E-0.28542 ; wipe and retract
G1 X124.511 Y87.828 E-0.09359 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X133.578 Y86.804 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X134.438 Y87.011 E0.02775 ; perimeter
G1 X135.116 Y87.230 E0.02234 ; perimeter
G1 X136.898 Y87.977 E0.06058 ; perimeter
G1 X137.634 Y91.143 E0.10190 ; perimeter
G1 X137.559 Y90.929 E0.00711 ; perimeter
G1 X137.073 Y89.976 E0.03354 ; perimeter
G1 X136.464 Y89.093 E0.03362 ; perimeter
G1 X135.742 Y88.296 E0.03372 ; perimeter
G1 X134.919 Y87.598 E0.03382 ; perimeter
G1 X134.011 Y87.011 E0.03391 ; perimeter
G1 X133.632 Y86.830 E0.01317 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X134.438 Y87.011 E-0.21810 ; wipe and retract
G1 X135.116 Y87.230 E-0.18800 ; wipe and retract
G1 X136.898 Y87.977 E-0.50983 ; wipe and retract
G1 X137.634 Y91.143 E-0.85766 ; wipe and retract
G1 X137.559 Y90.929 E-0.05981 ; wipe and retract
G1 X137.073 Y89.976 E-0.28229 ; wipe and retract
G1 X136.719 Y89.463 E-0.16430 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X139.601 Y93.287 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X139.897 Y93.066 E0.01157 ; perimeter
G1 X140.798 Y93.066 E0.02825 ; perimeter
G1 X141.094 Y93.287 E0.01157 ; perimeter
G1 X140.798 Y93.508 E0.01157 ; perimeter
G1 X139.897 Y93.508 E0.02825 ; perimeter
G1 X139.650 Y93.322 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X139.897 Y93.066 E-0.09381 ; wipe and retract
G1 X140.798 Y93.066 E-0.23778 ; wipe and retract
G1 X141.094 Y93.287 E-0.09738 ; wipe and retract
G1 X140.798 Y93.508 E-0.09738 ; wipe and retract
G1 X139.897 Y93.508 E-0.23778 ; wipe and retract
G1 X139.650 Y93.322 E-0.08155 ; wipe and retract
G1 E-1.55431 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X128.463 Y103.100 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X129.544 Y103.204 E0.03407 ; perimeter
G1 X130.667 Y103.542 E0.03676 ; perimeter
G1 X131.702 Y104.092 E0.03676 ; perimeter
G1 X132.610 Y104.834 E0.03676 ; perimeter
G1 X133.355 Y105.738 E0.03675 ; perimeter
G1 X133.911 Y106.772 E0.03678 ; perimeter
G1 X134.264 Y107.912 E0.03743 ; perimeter
G1 X134.427 Y108.953 E0.03304 ; perimeter
G1 X134.513 Y108.985 E0.00288 ; perimeter
G1 X134.331 Y109.834 E0.02723 ; perimeter
G1 X134.272 Y110.196 E0.01151 ; perimeter
G1 X133.920 Y111.346 E0.03769 ; perimeter
G1 X133.369 Y112.382 E0.03679 ; perimeter
G1 X132.627 Y113.289 E0.03675 ; perimeter
G1 X131.722 Y114.035 E0.03679 ; perimeter
G1 X130.206 Y114.849 E0.05394 ; perimeter
G1 X130.210 Y116.052 E0.03771 ; perimeter
G1 X126.597 Y116.060 E0.11328 ; perimeter
G1 X126.598 Y114.857 E0.03770 ; perimeter
G1 X125.077 Y114.049 E0.05401 ; perimeter
G1 X124.169 Y113.307 E0.03676 ; perimeter
G1 X123.423 Y112.402 E0.03675 ; perimeter
G1 X122.867 Y111.368 E0.03681 ; perimeter
G1 X122.621 Y110.579 E0.02593 ; perimeter
G1 X122.467 Y110.177 E0.01349 ; perimeter
G1 X122.260 Y109.391 E0.02548 ; perimeter
G1 X122.403 Y108.765 E0.02013 ; perimeter
G1 X122.517 Y107.929 E0.02647 ; perimeter
G1 X122.859 Y106.794 E0.03715 ; perimeter
G1 X123.409 Y105.759 E0.03675 ; perimeter
G1 X124.151 Y104.852 E0.03675 ; perimeter
G1 X125.056 Y104.106 E0.03676 ; perimeter
G1 X126.089 Y103.551 E0.03676 ; perimeter
G1 X127.210 Y103.209 E0.03676 ; perimeter
G1 X128.291 Y103.100 E0.03407 ; perimeter
G1 X128.291 Y102.885 E0.00674 ; perimeter
G1 X128.462 Y102.885 E0.00538 ; perimeter
G1 X128.462 Y103.040 E0.00486 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X129.544 Y103.204 E-0.28869 ; wipe and retract
G1 X130.667 Y103.542 E-0.30939 ; wipe and retract
G1 X131.702 Y104.092 E-0.30937 ; wipe and retract
G1 X132.610 Y104.834 E-0.30937 ; wipe and retract
G1 X133.355 Y105.738 E-0.30934 ; wipe and retract
G1 X133.911 Y106.772 E-0.30957 ; wipe and retract
G1 X134.264 Y107.912 E-0.31506 ; wipe and retract
G1 X134.340 Y108.396 E-0.12921 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X124.396 Y130.512 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X124.553 Y129.887 E0.02019 ; perimeter
G1 X124.654 Y129.190 E0.02209 ; perimeter
G1 X124.937 Y128.260 E0.03047 ; perimeter
G1 X125.388 Y127.417 E0.02999 ; perimeter
G1 X125.994 Y126.678 E0.02998 ; perimeter
G1 X126.734 Y126.071 E0.02998 ; perimeter
G1 X127.577 Y125.621 E0.02999 ; perimeter
G1 X128.492 Y125.343 E0.02999 ; perimeter
G1 X129.444 Y125.249 E0.02999 ; perimeter
G1 X130.396 Y125.343 E0.02999 ; perimeter
G1 X131.311 Y125.621 E0.02999 ; perimeter
G1 X132.155 Y126.071 E0.02999 ; perimeter
G1 X132.894 Y126.678 E0.02998 ; perimeter
G1 X133.501 Y127.417 E0.02998 ; perimeter
G1 X133.952 Y128.260 E0.02998 ; perimeter
G1 X134.229 Y129.175 E0.02998 ; perimeter
G1 X134.323 Y130.126 E0.02997 ; perimeter
G1 X134.229 Y131.083 E0.03014 ; perimeter
G1 X133.959 Y132.030 E0.03087 ; perimeter
G1 X133.865 Y132.233 E0.00701 ; perimeter
G1 X133.640 Y132.881 E0.02151 ; perimeter
G1 X133.578 Y132.865 E0.00200 ; perimeter
G1 X132.922 Y133.562 E0.03000 ; perimeter
G1 X132.157 Y134.180 E0.03085 ; perimeter
G1 X131.311 Y134.632 E0.03006 ; perimeter
G1 X130.396 Y134.909 E0.02999 ; perimeter
G1 X129.444 Y135.003 E0.02999 ; perimeter
G1 X128.492 Y134.909 E0.02999 ; perimeter
G1 X127.577 Y134.632 E0.02999 ; perimeter
G1 X126.734 Y134.181 E0.02999 ; perimeter
G1 X125.994 Y133.575 E0.02998 ; perimeter
G1 X125.388 Y132.836 E0.02999 ; perimeter
G1 X124.932 Y131.985 E0.03026 ; perimeter
G1 X124.716 Y131.335 E0.02146 ; perimeter
G1 X124.418 Y130.568 E0.02580 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X124.553 Y129.887 E-0.18310 ; wipe and retract
G1 X124.654 Y129.190 E-0.18591 ; wipe and retract
G1 X124.937 Y128.260 E-0.25647 ; wipe and retract
G1 X125.388 Y127.417 E-0.25238 ; wipe and retract
G1 X125.994 Y126.678 E-0.25233 ; wipe and retract
G1 X126.734 Y126.071 E-0.25235 ; wipe and retract
G1 X127.577 Y125.621 E-0.25237 ; wipe and retract
G1 X128.492 Y125.343 E-0.25239 ; wipe and retract
G1 X129.444 Y125.249 E-0.25240 ; wipe and retract
G1 X129.973 Y125.301 E-0.14031 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X135.359 Y133.435 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X135.688 Y133.268 E0.01157 ; perimeter
G1 X141.878 Y134.335 E0.19695 ; perimeter
G1 X142.131 Y134.603 E0.01156 ; perimeter
G1 X141.802 Y134.770 E0.01157 ; perimeter
G1 X135.613 Y133.703 E0.19694 ; perimeter
G1 X135.401 Y133.478 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X135.688 Y133.268 E-0.09379 ; wipe and retract
G1 X141.878 Y134.335 E-1.65760 ; wipe and retract
G1 X142.131 Y134.603 E-0.09727 ; wipe and retract
G1 X141.802 Y134.770 E-0.09738 ; wipe and retract
G1 X140.555 Y134.555 E-0.33396 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X144.106 Y134.403 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X144.119 Y134.276 E0.00403 ; perimeter
G1 X145.744 Y134.305 E0.05095 ; perimeter
G1 X145.859 Y133.866 E0.01422 ; perimeter
G1 X145.971 Y134.300 E0.01403 ; perimeter
G1 X147.800 Y134.300 E0.05736 ; perimeter
G1 X147.936 Y133.775 E0.01698 ; perimeter
G1 X148.071 Y134.300 E0.01698 ; perimeter
G1 X150.158 Y134.300 E0.06543 ; perimeter
G1 X150.358 Y133.525 E0.02508 ; perimeter
G1 X150.384 Y133.525 E0.00082 ; perimeter
G1 X150.584 Y134.300 E0.02508 ; perimeter
G1 X152.671 Y134.300 E0.06543 ; perimeter
G1 X152.806 Y133.775 E0.01698 ; perimeter
G1 X152.941 Y134.300 E0.01698 ; perimeter
G1 X154.771 Y134.300 E0.05736 ; perimeter
G1 X154.883 Y133.866 E0.01403 ; perimeter
G1 X154.997 Y134.305 E0.01422 ; perimeter
G1 X156.622 Y134.276 E0.05093 ; perimeter
G1 X156.679 Y134.795 E0.01639 ; perimeter
G1 X156.670 Y134.888 E0.00293 ; perimeter
G1 X154.997 Y134.858 E0.05247 ; perimeter
G1 X154.883 Y135.297 E0.01422 ; perimeter
G1 X154.771 Y134.863 E0.01403 ; perimeter
G1 X152.941 Y134.863 E0.05736 ; perimeter
G1 X152.806 Y135.388 E0.01698 ; perimeter
G1 X152.670 Y134.863 E0.01700 ; perimeter
G1 X150.575 Y134.866 E0.06569 ; perimeter
G1 X150.371 Y135.733 E0.02793 ; perimeter
G1 X150.166 Y134.866 E0.02793 ; perimeter
G1 X148.071 Y134.863 E0.06569 ; perimeter
G1 X147.936 Y135.388 E0.01700 ; perimeter
G1 X147.800 Y134.863 E0.01698 ; perimeter
G1 X145.971 Y134.863 E0.05736 ; perimeter
G1 X145.859 Y135.297 E0.01403 ; perimeter
G1 X145.744 Y134.858 E0.01422 ; perimeter
G1 X144.080 Y134.888 E0.05220 ; perimeter
G1 X144.069 Y134.753 E0.00426 ; perimeter
G1 X144.099 Y134.463 E0.00913 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X144.119 Y134.276 E-0.04976 ; wipe and retract
G1 X145.744 Y134.305 E-0.42882 ; wipe and retract
G1 X145.859 Y133.866 E-0.11965 ; wipe and retract
G1 X145.971 Y134.300 E-0.11809 ; wipe and retract
G1 X147.800 Y134.300 E-0.48274 ; wipe and retract
G1 X147.936 Y133.775 E-0.14288 ; wipe and retract
G1 X148.071 Y134.300 E-0.14288 ; wipe and retract
G1 X150.158 Y134.300 E-0.55067 ; wipe and retract
G1 X150.358 Y133.525 E-0.21109 ; wipe and retract
G1 X150.384 Y133.525 E-0.00687 ; wipe and retract
G1 X150.409 Y133.623 E-0.02655 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X147.370 Y127.844 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X147.074 Y127.623 E0.01157 ; perimeter
G1 X147.370 Y127.402 E0.01157 ; perimeter
G1 X148.271 Y127.402 E0.02825 ; perimeter
G1 X148.567 Y127.623 E0.01157 ; perimeter
G1 X148.271 Y127.844 E0.01157 ; perimeter
G1 X147.430 Y127.844 E0.02637 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X147.074 Y127.623 E-0.11048 ; wipe and retract
G1 X147.370 Y127.402 E-0.09739 ; wipe and retract
G1 X148.271 Y127.402 E-0.23780 ; wipe and retract
G1 X148.567 Y127.623 E-0.09738 ; wipe and retract
G1 X148.271 Y127.844 E-0.09739 ; wipe and retract
G1 X147.430 Y127.844 E-0.22196 ; wipe and retract
G1 E-1.53761 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X150.090 Y127.709 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X150.492 Y126.723 E0.03339 ; perimeter
G1 X150.721 Y126.276 E0.01576 ; perimeter
G1 X150.995 Y125.887 E0.01491 ; perimeter
G1 X151.321 Y125.545 E0.01482 ; perimeter
G1 X151.694 Y125.254 E0.01481 ; perimeter
G1 X152.105 Y125.021 E0.01481 ; perimeter
G1 X152.545 Y124.851 E0.01481 ; perimeter
G1 X152.964 Y124.757 E0.01346 ; perimeter
G1 X153.005 Y124.710 E0.00195 ; perimeter
G1 X153.950 Y124.710 E0.02963 ; perimeter
G1 X153.991 Y124.757 E0.00195 ; perimeter
G1 X154.409 Y124.851 E0.01346 ; perimeter
G1 X154.850 Y125.021 E0.01481 ; perimeter
G1 X155.261 Y125.254 E0.01481 ; perimeter
G1 X155.634 Y125.544 E0.01481 ; perimeter
G1 X155.959 Y125.887 E0.01482 ; perimeter
G1 X156.233 Y126.275 E0.01491 ; perimeter
G1 X156.463 Y126.722 E0.01576 ; perimeter
G1 X156.865 Y127.709 E0.03339 ; perimeter
G1 X156.505 Y128.997 E0.04195 ; perimeter
G1 X156.312 Y129.431 E0.01490 ; perimeter
G1 X156.227 Y129.560 E0.00483 ; perimeter
G1 X155.918 Y129.250 E0.01372 ; perimeter
G1 X156.056 Y128.991 E0.00921 ; perimeter
G1 X156.215 Y128.468 E0.01715 ; perimeter
G1 X156.268 Y127.923 E0.01715 ; perimeter
G1 X156.215 Y127.379 E0.01715 ; perimeter
G1 X156.056 Y126.855 E0.01715 ; perimeter
G1 X155.798 Y126.373 E0.01715 ; perimeter
G1 X155.451 Y125.950 E0.01715 ; perimeter
G1 X155.028 Y125.603 E0.01715 ; perimeter
G1 X154.548 Y125.346 E0.01707 ; perimeter
G1 X154.016 Y125.184 E0.01742 ; perimeter
G1 X153.479 Y125.133 E0.01692 ; perimeter
G1 X152.933 Y125.186 E0.01719 ; perimeter
G1 X152.409 Y125.345 E0.01717 ; perimeter
G1 X151.927 Y125.603 E0.01715 ; perimeter
G1 X151.504 Y125.950 E0.01715 ; perimeter
G1 X151.157 Y126.373 E0.01715 ; perimeter
G1 X150.899 Y126.856 E0.01715 ; perimeter
G1 X150.740 Y127.379 E0.01715 ; perimeter
G1 X150.687 Y127.924 E0.01715 ; perimeter
G1 X150.740 Y128.468 E0.01715 ; perimeter
G1 X150.899 Y128.992 E0.01715 ; perimeter
G1 X151.038 Y129.251 E0.00921 ; perimeter
G1 X150.728 Y129.560 E0.01372 ; perimeter
G1 X150.643 Y129.432 E0.00483 ; perimeter
G1 X150.450 Y128.997 E0.01490 ; perimeter
G1 X150.108 Y127.766 E0.04007 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X150.492 Y126.723 E-0.29349 ; wipe and retract
G1 X150.721 Y126.276 E-0.13265 ; wipe and retract
G1 X150.995 Y125.887 E-0.12547 ; wipe and retract
G1 X151.321 Y125.545 E-0.12469 ; wipe and retract
G1 X151.694 Y125.254 E-0.12466 ; wipe and retract
G1 X152.105 Y125.021 E-0.12466 ; wipe and retract
G1 X152.545 Y124.851 E-0.12466 ; wipe and retract
G1 X152.964 Y124.757 E-0.11327 ; wipe and retract
G1 X153.005 Y124.710 E-0.01643 ; wipe and retract
G1 X153.950 Y124.710 E-0.24942 ; wipe and retract
G1 X153.991 Y124.757 E-0.01642 ; wipe and retract
G1 X154.409 Y124.851 E-0.11329 ; wipe and retract
G1 X154.850 Y125.021 E-0.12466 ; wipe and retract
G1 X155.261 Y125.254 E-0.12466 ; wipe and retract
G1 X155.634 Y125.544 E-0.12466 ; wipe and retract
G1 X155.959 Y125.887 E-0.12469 ; wipe and retract
G1 X156.233 Y126.275 E-0.12548 ; wipe and retract
G1 X156.401 Y126.601 E-0.09674 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.354 Y127.623 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X158.650 Y127.402 E0.01157 ; perimeter
G1 X159.551 Y127.402 E0.02825 ; perimeter
G1 X159.847 Y127.623 E0.01157 ; perimeter
G1 X159.551 Y127.844 E0.01157 ; perimeter
G1 X158.650 Y127.844 E0.02825 ; perimeter
G1 X158.403 Y127.658 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X158.650 Y127.402 E-0.09383 ; wipe and retract
G1 X159.551 Y127.402 E-0.23778 ; wipe and retract
G1 X159.847 Y127.623 E-0.09738 ; wipe and retract
G1 X159.551 Y127.844 E-0.09739 ; wipe and retract
G1 X158.650 Y127.844 E-0.23780 ; wipe and retract
G1 X158.403 Y127.658 E-0.08155 ; wipe and retract
G1 E-1.55426 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.810 Y134.612 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X160.211 Y134.612 E0.04393 ; perimeter
G1 X160.507 Y134.833 E0.01157 ; perimeter
G1 X160.211 Y135.054 E0.01157 ; perimeter
G1 X158.810 Y135.054 E0.04393 ; perimeter
G1 X158.514 Y134.833 E0.01157 ; perimeter
G1 X158.765 Y134.652 E0.00970 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X160.211 Y134.612 E-0.38180 ; wipe and retract
G1 X160.507 Y134.833 E-0.09738 ; wipe and retract
G1 X160.211 Y135.054 E-0.09738 ; wipe and retract
G1 X158.810 Y135.054 E-0.36973 ; wipe and retract
G1 X158.514 Y134.833 E-0.09738 ; wipe and retract
G1 X158.765 Y134.652 E-0.08160 ; wipe and retract
G1 E-1.27471 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X172.201 Y143.305 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:External perimeter
G1 F1800.000
G1 X171.310 Y143.375 E0.02800 ; perimeter
G1 X121.979 Y143.375 E1.54677 ; perimeter
G1 X121.088 Y143.305 E0.02800 ; perimeter
G1 X120.235 Y143.101 E0.02750 ; perimeter
G1 X119.425 Y142.765 E0.02750 ; perimeter
G1 X118.677 Y142.307 E0.02750 ; perimeter
G1 X118.011 Y141.737 E0.02750 ; perimeter
G1 X117.441 Y141.070 E0.02750 ; perimeter
G1 X116.983 Y140.323 E0.02750 ; perimeter
G1 X116.647 Y139.512 E0.02750 ; perimeter
G1 X116.442 Y138.660 E0.02750 ; perimeter
G1 X116.372 Y137.769 E0.02800 ; perimeter
G1 X116.372 Y72.231 E2.05491 ; perimeter
G1 X116.442 Y71.340 E0.02800 ; perimeter
G1 X116.647 Y70.488 E0.02750 ; perimeter
G1 X116.983 Y69.677 E0.02750 ; perimeter
G1 X117.441 Y68.930 E0.02750 ; perimeter
G1 X118.011 Y68.263 E0.02750 ; perimeter
G1 X118.677 Y67.693 E0.02750 ; perimeter
G1 X119.425 Y67.235 E0.02750 ; perimeter
G1 X120.235 Y66.899 E0.02750 ; perimeter
G1 X121.088 Y66.695 E0.02750 ; perimeter
G1 X121.979 Y66.625 E0.02800 ; perimeter
G1 X171.365 Y66.629 E1.54848 ; perimeter
G1 X172.201 Y66.695 E0.02628 ; perimeter
G1 X173.054 Y66.899 E0.02750 ; perimeter
G1 X173.864 Y67.235 E0.02750 ; perimeter
G1 X174.612 Y67.693 E0.02750 ; perimeter
G1 X175.278 Y68.263 E0.02750 ; perimeter
G1 X175.848 Y68.930 E0.02750 ; perimeter
G1 X176.306 Y69.677 E0.02750 ; perimeter
G1 X176.642 Y70.488 E0.02750 ; perimeter
G1 X176.846 Y71.340 E0.02750 ; perimeter
G1 X176.917 Y72.231 E0.02800 ; perimeter
G1 X176.917 Y137.769 E2.05491 ; perimeter
G1 X176.846 Y138.660 E0.02800 ; perimeter
G1 X176.642 Y139.512 E0.02750 ; perimeter
G1 X176.306 Y140.323 E0.02750 ; perimeter
G1 X175.848 Y141.070 E0.02750 ; perimeter
G1 X175.278 Y141.737 E0.02750 ; perimeter
G1 X174.612 Y142.307 E0.02750 ; perimeter
G1 X173.864 Y142.765 E0.02750 ; perimeter
G1 X173.054 Y143.101 E0.02750 ; perimeter
G1 X172.259 Y143.291 E0.02562 ; perimeter
G1 X171.949 Y142.994 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X171.310 Y143.375 E-0.25134 ; wipe and retract
G1 X163.623 Y143.375 E-2.02866 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.211 Y137.097 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X167.591 Y136.477 E0.02843 ; infill
G1 X167.591 Y135.926 E0.01789 ; infill
G1 X168.593 Y136.927 E0.04594 ; infill
G1 X168.871 Y136.927 E0.00902 ; infill
G1 X168.871 Y136.654 E0.00886 ; infill
G1 X167.591 Y135.374 E0.05870 ; infill
G1 X167.591 Y134.823 E0.01789 ; infill
G1 X168.872 Y136.103 E0.05873 ; infill
G1 X168.872 Y135.552 E0.01787 ; infill
G1 X167.591 Y134.271 E0.05875 ; infill
G1 X167.591 Y133.720 E0.01789 ; infill
G1 X168.873 Y135.001 E0.05878 ; infill
G1 X168.874 Y134.450 E0.01787 ; infill
G1 X167.591 Y133.168 E0.05880 ; infill
G1 X167.591 Y132.616 E0.01789 ; infill
G1 X168.874 Y133.899 E0.05883 ; infill
G1 X168.875 Y133.348 E0.01787 ; infill
G1 X167.591 Y132.065 E0.05886 ; infill
G1 X167.591 Y131.513 E0.01789 ; infill
G1 X168.875 Y132.797 E0.05888 ; infill
G1 X168.895 Y132.266 E0.01726 ; infill
G1 X167.591 Y130.962 E0.05979 ; infill
G1 X167.591 Y130.410 E0.01789 ; infill
G1 X168.942 Y131.761 E0.06193 ; infill
G1 X168.998 Y131.266 E0.01617 ; infill
G1 X167.591 Y129.859 E0.06451 ; infill
G1 X167.591 Y129.307 E0.01789 ; infill
G1 X168.951 Y130.667 E0.06236 ; infill
G1 X168.895 Y130.059 E0.01981 ; infill
G1 X167.591 Y128.756 E0.05977 ; infill
G1 X167.591 Y128.204 E0.01789 ; infill
G1 X168.875 Y129.488 E0.05888 ; infill
G1 X168.874 Y128.936 E0.01791 ; infill
G1 X167.591 Y127.653 E0.05884 ; infill
G1 X167.591 Y127.101 E0.01789 ; infill
G1 X168.874 Y128.383 E0.05880 ; infill
G1 X168.873 Y127.831 E0.01791 ; infill
G1 X167.869 Y126.828 E0.04602 ; infill
G1 X168.421 Y126.828 E0.01789 ; infill
G1 X169.042 Y127.449 E0.02849 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X168.421 Y126.828 E-0.23180 ; wipe and retract
G1 X167.869 Y126.828 E-0.14554 ; wipe and retract
G1 X168.873 Y127.831 E-0.37451 ; wipe and retract
G1 X168.874 Y128.383 E-0.14575 ; wipe and retract
G1 X167.591 Y127.101 E-0.47853 ; wipe and retract
G1 X167.591 Y127.653 E-0.14554 ; wipe and retract
G1 X168.874 Y128.936 E-0.47883 ; wipe and retract
G1 X168.875 Y129.488 E-0.14575 ; wipe and retract
G1 X168.517 Y129.130 E-0.13374 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X171.333 Y131.175 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X174.189 Y131.175 E0.01495 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X171.333 Y131.175 E-0.75364 ; wipe and retract
G1 E-1.64636 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X150.516 Y135.947 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X150.371 Y135.963 E0.00101 ; infill
G1 X150.225 Y135.947 E0.00101 ; infill
G1 X150.371 Y137.699 F10800.000 ; move to first infill point
G1 F1800.000
G1 X150.371 Y140.640 E0.01500 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X150.371 Y137.699 E-0.77600 ; wipe and retract
G1 E-1.62400 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X120.370 Y142.626 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X117.436 Y139.691 E0.13048 ; infill
G1 X117.573 Y140.022 E0.01126 ; infill
G1 X117.977 Y140.681 E0.02431 ; infill
G1 X118.478 Y141.268 E0.02428 ; infill
G1 X119.359 Y142.150 E0.03918 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X118.478 Y141.268 E-0.32887 ; wipe and retract
G1 X117.977 Y140.681 E-0.20375 ; wipe and retract
G1 X117.573 Y140.022 E-0.20401 ; wipe and retract
G1 X117.436 Y139.691 E-0.09451 ; wipe and retract
G1 X120.370 Y142.626 E-1.09516 ; wipe and retract
G1 E-0.47369 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X119.138 Y130.618 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X122.309 Y130.618 E0.01504 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X119.138 Y130.618 E-0.83672 ; wipe and retract
G1 E-1.56328 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X135.726 Y133.498 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X141.812 Y134.548 E0.02926 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X135.726 Y133.498 E-1.62980 ; wipe and retract
G1 E-0.77020 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X143.967 Y135.568 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X143.983 Y135.405 E0.00129 ; infill
G1 X143.998 Y135.241 E0.00189 ; infill
G1 X144.014 Y135.078 E0.00249 ; infill
G1 X143.995 Y133.698 F10800.000 ; move to first infill point
G1 F1800.000
G1 X144.010 Y133.825 E0.00091 ; infill
G1 X144.026 Y133.957 E0.00135 ; infill
G1 X144.036 Y134.085 E0.00155 ; infill
G1 X144.277 Y134.582 F10800.000 ; move to first infill point
G1 F1800.000
G1 X145.082 Y134.582 E0.01507 ; infill
G1 X145.887 Y134.582 E0.01326 ; infill
G1 X156.466 Y134.582 E0.16431 ; infill
G1 X156.705 Y134.085 F10800.000 ; move to first infill point
G1 F1800.000
G1 X156.714 Y133.970 E0.00137 ; infill
G1 X156.730 Y133.833 E0.00146 ; infill
G1 X156.746 Y133.700 E0.00098 ; infill
G1 X156.732 Y135.078 F10800.000 ; move to first infill point
G1 F1800.000
G1 X156.747 Y135.246 E0.00263 ; infill
G1 X156.763 Y135.413 E0.00199 ; infill
G1 X156.778 Y135.581 E0.00135 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X156.763 Y135.413 E-0.04441 ; wipe and retract
G1 E-2.35559 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.838 Y134.833 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X160.183 Y134.833 E0.00637 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X158.838 Y134.833 E-0.35499 ; wipe and retract
G1 E-2.04501 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X163.119 Y137.097 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X162.497 Y136.475 E0.02853 ; infill
G1 X162.480 Y135.906 E0.01846 ; infill
G1 X163.501 Y136.927 E0.04684 ; infill
G1 X163.780 Y136.927 E0.00906 ; infill
G1 X163.780 Y136.655 E0.00883 ; infill
G1 X162.417 Y135.292 E0.06252 ; infill
G1 X162.362 Y134.847 E0.01455 ; infill
G1 X162.378 Y134.701 E0.00474 ; infill
G1 X163.780 Y136.103 E0.06431 ; infill
G1 X163.780 Y135.552 E0.01789 ; infill
G1 X162.434 Y134.206 E0.06172 ; infill
G1 X162.479 Y133.699 E0.01650 ; infill
G1 X163.780 Y135.000 E0.05968 ; infill
G1 X163.780 Y134.449 E0.01789 ; infill
G1 X162.496 Y133.164 E0.05890 ; infill
G1 X162.496 Y132.613 E0.01789 ; infill
G1 X163.780 Y133.897 E0.05890 ; infill
G1 X163.780 Y133.345 E0.01789 ; infill
G1 X162.496 Y132.061 E0.05890 ; infill
G1 X162.496 Y131.510 E0.01789 ; infill
G1 X163.780 Y132.794 E0.05890 ; infill
G1 X163.780 Y132.242 E0.01789 ; infill
G1 X162.496 Y130.958 E0.05890 ; infill
G1 X162.496 Y130.406 E0.01789 ; infill
G1 X163.780 Y131.691 E0.05890 ; infill
G1 X163.780 Y131.139 E0.01789 ; infill
G1 X162.496 Y129.855 E0.05890 ; infill
G1 X162.496 Y129.303 E0.01789 ; infill
G1 X163.780 Y130.587 E0.05890 ; infill
G1 X163.780 Y130.036 E0.01789 ; infill
G1 X162.478 Y128.733 E0.05974 ; infill
G1 X162.420 Y128.124 E0.01985 ; infill
G1 X163.780 Y129.484 E0.06238 ; infill
G1 X163.780 Y128.933 E0.01789 ; infill
G1 X162.372 Y127.524 E0.06459 ; infill
G1 X162.425 Y127.026 E0.01626 ; infill
G1 X163.780 Y128.381 E0.06216 ; infill
G1 X163.780 Y127.830 E0.01789 ; infill
G1 X162.778 Y126.828 E0.04595 ; infill
G1 X163.330 Y126.828 E0.01789 ; infill
G1 X163.950 Y127.448 E0.02843 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X163.330 Y126.828 E-0.23134 ; wipe and retract
G1 X162.778 Y126.828 E-0.14557 ; wipe and retract
G1 X163.780 Y127.830 E-0.37389 ; wipe and retract
G1 X163.780 Y128.381 E-0.14556 ; wipe and retract
G1 X162.425 Y127.026 E-0.50578 ; wipe and retract
G1 X162.372 Y127.524 E-0.13232 ; wipe and retract
G1 X163.780 Y128.933 E-0.52555 ; wipe and retract
G1 X163.780 Y129.484 E-0.14556 ; wipe and retract
G1 X163.581 Y129.285 E-0.07443 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X159.523 Y127.623 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X158.678 Y127.623 E0.00400 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X159.523 Y127.623 E-0.22306 ; wipe and retract
G1 E-2.17694 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X156.283 Y128.975 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X156.428 Y128.507 E0.00221 ; infill
G1 X156.530 Y127.916 E0.00271 ; infill
G1 X156.549 Y127.723 E0.00294 ; infill
G1 X156.485 Y127.466 E0.00403 ; infill
G1 X156.453 Y127.337 E0.00159 ; infill
G1 X156.359 Y127.070 E0.00249 ; infill
G1 X156.268 Y126.812 E0.00178 ; infill
G1 X156.252 Y126.774 E0.00018 ; infill
G1 X156.130 Y126.540 F10800.000 ; move to first infill point
G1 F1800.000
G1 X156.026 Y126.349 E0.00095 ; infill
G1 X155.851 Y126.102 F10800.000 ; move to first infill point
G1 F1800.000
G1 X155.728 Y125.952 E0.00090 ; infill
G1 X155.518 Y125.730 F10800.000 ; move to first infill point
G1 F1800.000
G1 X155.417 Y125.646 E0.00057 ; infill
G1 X154.840 Y125.260 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.723 Y125.199 E0.00057 ; infill
G1 X154.440 Y125.091 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.254 Y125.034 E0.00090 ; infill
G1 X153.946 Y124.964 F10800.000 ; move to first infill point
G1 F1800.000
G1 X153.845 Y124.938 E0.00048 ; infill
G1 X153.505 Y124.922 E0.00157 ; infill
G1 X153.455 Y124.922 F10800.000 ; move to first infill point
G1 F1800.000
G1 X153.091 Y124.949 E0.00246 ; infill
G1 X153.072 Y124.955 E0.00011 ; infill
G1 X152.999 Y124.967 E0.00035 ; infill
G1 X152.702 Y125.034 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.517 Y125.090 E0.00090 ; infill
G1 X152.232 Y125.199 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.115 Y125.261 E0.00057 ; infill
G1 X151.538 Y125.646 F10800.000 ; move to first infill point
G1 F1800.000
G1 X151.437 Y125.731 E0.00057 ; infill
G1 X151.227 Y125.952 F10800.000 ; move to first infill point
G1 F1800.000
G1 X151.104 Y126.102 E0.00090 ; infill
G1 X150.929 Y126.349 F10800.000 ; move to first infill point
G1 F1800.000
G1 X150.825 Y126.541 E0.00096 ; infill
G1 X150.703 Y126.775 F10800.000 ; move to first infill point
G1 F1800.000
G1 X150.470 Y127.466 E0.00323 ; infill
G1 X150.406 Y127.724 E0.00401 ; infill
G1 X150.425 Y127.917 E0.00293 ; infill
G1 X150.454 Y128.063 E0.00179 ; infill
G1 X150.480 Y128.195 E0.00128 ; infill
G1 X150.518 Y128.464 E0.00199 ; infill
G1 X150.527 Y128.508 E0.00024 ; infill
G1 X150.672 Y128.975 E0.00224 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X150.527 Y128.508 E-0.12910 ; wipe and retract
G1 E-2.27090 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X148.243 Y127.623 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X147.398 Y127.623 E0.00401 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X148.243 Y127.623 E-0.22307 ; wipe and retract
G1 E-2.17693 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X143.717 Y128.029 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X144.328 Y128.640 E0.02772 ; infill
G1 X144.873 Y128.640 E0.01750 ; infill
G1 X143.886 Y127.653 E0.04478 ; infill
G1 X143.886 Y127.108 E0.01750 ; infill
G1 X145.213 Y128.434 E0.06019 ; infill
G1 X145.267 Y127.943 E0.01586 ; infill
G1 X143.886 Y126.562 E0.06264 ; infill
G1 X143.886 Y126.016 E0.01750 ; infill
G1 X145.279 Y127.409 E0.06317 ; infill
G1 X145.211 Y126.795 E0.01980 ; infill
G1 X143.886 Y125.471 E0.06009 ; infill
G1 X143.886 Y124.925 E0.01750 ; infill
G1 X145.184 Y126.223 E0.05888 ; infill
G1 X145.166 Y125.659 E0.01811 ; infill
G1 X143.886 Y124.379 E0.05804 ; infill
G1 X143.886 Y123.834 E0.01750 ; infill
G1 X145.166 Y125.113 E0.05804 ; infill
G1 X145.166 Y124.568 E0.01750 ; infill
G1 X143.886 Y123.288 E0.05805 ; infill
G1 X143.886 Y122.743 E0.01750 ; infill
G1 X145.166 Y124.022 E0.05805 ; infill
G1 X145.166 Y123.477 E0.01750 ; infill
G1 X143.886 Y122.197 E0.05806 ; infill
G1 X143.886 Y121.651 E0.01750 ; infill
G1 X145.166 Y122.931 E0.05806 ; infill
G1 X145.166 Y122.386 E0.01750 ; infill
G1 X143.886 Y121.106 E0.05807 ; infill
G1 X143.886 Y120.560 E0.01750 ; infill
G1 X145.167 Y121.840 E0.05808 ; infill
G1 X145.180 Y121.308 E0.01708 ; infill
G1 X143.886 Y120.014 E0.05868 ; infill
G1 X143.886 Y119.469 E0.01750 ; infill
G1 X145.199 Y120.781 E0.05954 ; infill
G1 X145.218 Y120.254 E0.01691 ; infill
G1 X144.214 Y119.250 E0.04555 ; infill
G1 X144.759 Y119.250 E0.01750 ; infill
G1 X145.455 Y119.946 E0.03154 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X144.759 Y119.250 E-0.25947 ; wipe and retract
G1 X144.214 Y119.250 E-0.14399 ; wipe and retract
G1 X145.218 Y120.254 E-0.37465 ; wipe and retract
G1 X145.199 Y120.781 E-0.13909 ; wipe and retract
G1 X143.886 Y119.469 E-0.48973 ; wipe and retract
G1 X143.886 Y120.014 E-0.14398 ; wipe and retract
G1 X145.180 Y121.308 E-0.48268 ; wipe and retract
G1 X145.167 Y121.840 E-0.14052 ; wipe and retract
G1 X144.883 Y121.556 E-0.10589 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X147.915 Y119.161 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X151.871 Y116.872 E0.02160 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X147.915 Y119.161 E-1.20608 ; wipe and retract
G1 E-1.19392 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X156.877 Y115.837 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X156.751 Y115.876 E0.00057 ; infill
G1 X156.070 Y116.011 F10800.000 ; move to first infill point
G1 F1800.000
G1 X155.940 Y116.023 E0.00057 ; infill
G1 X155.634 Y116.015 F10800.000 ; move to first infill point
G1 F1800.000
G1 X155.441 Y115.996 E0.00090 ; infill
G1 X155.142 Y115.945 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.942 Y115.886 E0.00092 ; infill
G1 X154.680 Y115.803 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.027 Y115.467 E0.00309 ; infill
G1 X153.787 Y115.318 E0.00383 ; infill
G1 X153.680 Y115.191 E0.00225 ; infill
G1 X153.515 Y114.950 E0.00335 ; infill
G1 X153.356 Y114.739 E0.00189 ; infill
G1 X153.332 Y114.703 E0.00023 ; infill
G1 X153.104 Y114.270 E0.00222 ; infill
G1 X152.999 Y113.993 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.941 Y113.805 E0.00091 ; infill
G1 X152.874 Y113.508 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.846 Y113.397 E0.00054 ; infill
G1 X152.830 Y113.052 E0.00162 ; infill
G1 X152.830 Y113.013 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.846 Y112.662 E0.00164 ; infill
G1 X152.874 Y112.553 E0.00053 ; infill
G1 X152.942 Y112.253 F10800.000 ; move to first infill point
G1 F1800.000
G1 X152.998 Y112.067 E0.00090 ; infill
G1 X153.107 Y111.784 F10800.000 ; move to first infill point
G1 F1800.000
G1 X153.168 Y111.667 E0.00057 ; infill
G1 X153.553 Y111.091 F10800.000 ; move to first infill point
G1 F1800.000
G1 X153.638 Y110.989 E0.00058 ; infill
G1 X153.854 Y110.784 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.057 Y110.617 E0.00124 ; infill
G1 X154.192 Y110.516 F10800.000 ; move to first infill point
G1 F1800.000
G1 X154.324 Y110.433 E0.00089 ; infill
G1 X154.551 Y110.306 E0.00168 ; infill
G1 X154.676 Y110.231 E0.00116 ; infill
G1 X154.789 Y110.176 E0.00139 ; infill
G1 X155.013 Y110.068 E0.00362 ; infill
G1 X155.229 Y110.040 E0.00317 ; infill
G1 X155.828 Y110.023 E0.00292 ; infill
G1 X156.197 Y110.060 E0.00181 ; infill
G1 X156.748 Y110.182 F10800.000 ; move to first infill point
G1 F1800.000
G1 X156.876 Y110.222 E0.00058 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X156.748 Y110.182 E-0.03537 ; wipe and retract
G1 E-2.36463 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X154.802 Y107.877 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X154.802 Y100.082 E0.03978 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X154.802 Y107.877 E-2.05707 ; wipe and retract
G1 E-0.34293 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X145.112 Y105.448 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X144.374 Y104.710 E0.03435 ; infill
G1 X144.195 Y104.710 E0.00588 ; infill
G1 X144.156 Y105.052 E0.01133 ; infill
G1 X144.991 Y105.887 E0.03887 ; infill
G1 X145.063 Y106.519 E0.02093 ; infill
G1 X144.099 Y105.555 E0.04488 ; infill
G1 X144.041 Y106.058 E0.01665 ; infill
G1 X145.131 Y107.147 E0.05073 ; infill
G1 X145.060 Y107.636 E0.01626 ; infill
G1 X143.984 Y106.560 E0.05009 ; infill
G1 X143.927 Y107.063 E0.01665 ; infill
G1 X144.971 Y108.107 E0.04863 ; infill
G1 X144.879 Y108.574 E0.01567 ; infill
G1 X144.000 Y107.696 E0.04089 ; infill
G1 X144.137 Y108.392 E0.02336 ; infill
G1 X144.778 Y109.034 E0.02985 ; infill
G1 X144.677 Y109.493 E0.01547 ; infill
G1 X144.289 Y109.105 E0.01808 ; infill
G1 X144.446 Y109.822 E0.02416 ; infill
G1 X144.719 Y110.095 E0.01271 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X144.446 Y109.822 E-0.10187 ; wipe and retract
G1 X144.289 Y109.105 E-0.19370 ; wipe and retract
G1 X144.677 Y109.493 E-0.14491 ; wipe and retract
G1 X144.778 Y109.034 E-0.12405 ; wipe and retract
G1 X144.137 Y108.392 E-0.23929 ; wipe and retract
G1 X144.000 Y107.696 E-0.18727 ; wipe and retract
G1 X144.879 Y108.574 E-0.32778 ; wipe and retract
G1 X144.971 Y108.107 E-0.12566 ; wipe and retract
G1 X143.927 Y107.063 E-0.38983 ; wipe and retract
G1 X143.984 Y106.560 E-0.13348 ; wipe and retract
G1 X144.821 Y107.397 E-0.31216 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X144.464 Y113.007 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X144.486 Y112.514 E0.00364 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X144.464 Y113.007 E-0.13046 ; wipe and retract
G1 E-2.26954 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X142.147 Y112.393 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X136.670 Y109.741 E0.02881 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X142.147 Y112.393 E-1.60589 ; wipe and retract
G1 E-0.79411 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X133.366 Y105.997 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X132.382 Y105.013 E0.04464 ; infill
G1 X131.785 Y104.526 E0.02473 ; infill
G1 X131.786 Y104.963 E0.01403 ; infill
G1 X133.584 Y106.760 E0.08155 ; infill
G1 X133.649 Y106.882 E0.00442 ; infill
G1 X133.868 Y107.590 E0.02380 ; infill
G1 X131.787 Y105.510 E0.09441 ; infill
G1 X131.788 Y106.056 E0.01754 ; infill
G1 X134.039 Y108.307 E0.10213 ; infill
G1 X134.141 Y108.955 E0.02102 ; infill
G1 X131.790 Y106.603 E0.10668 ; infill
G1 X131.791 Y107.150 E0.01754 ; infill
G1 X134.118 Y109.477 E0.10559 ; infill
G1 X134.028 Y109.933 E0.01490 ; infill
G1 X131.792 Y107.697 E0.10146 ; infill
G1 X131.793 Y108.244 E0.01754 ; infill
G1 X133.922 Y110.373 E0.09660 ; infill
G1 X133.794 Y110.791 E0.01402 ; infill
G1 X131.794 Y108.790 E0.09075 ; infill
G1 X131.795 Y109.337 E0.01754 ; infill
G1 X133.667 Y111.209 E0.08491 ; infill
G1 X133.481 Y111.569 E0.01300 ; infill
G1 X131.796 Y109.884 E0.07645 ; infill
G1 X131.798 Y110.431 E0.01754 ; infill
G1 X133.292 Y111.925 E0.06780 ; infill
G1 X133.093 Y112.272 E0.01283 ; infill
G1 X131.799 Y110.978 E0.05874 ; infill
G1 X131.800 Y111.524 E0.01754 ; infill
G1 X132.848 Y112.573 E0.04756 ; infill
G1 X132.603 Y112.873 E0.01244 ; infill
G1 X131.801 Y112.071 E0.03637 ; infill
G1 X131.802 Y112.618 E0.01754 ; infill
G1 X132.342 Y113.158 E0.02450 ; infill
G1 X132.043 Y113.404 E0.01244 ; infill
G1 X131.633 Y112.995 E0.01859 ; infill
G1 X131.548 Y114.001 F10800.000 ; move to first infill point
G1 F1800.000
G1 X131.232 Y113.685 E0.01432 ; infill
G1 X130.687 Y113.686 E0.01747 ; infill
G1 X131.067 Y114.066 E0.01723 ; infill
G1 X130.712 Y114.257 E0.01293 ; infill
G1 X130.143 Y113.687 E0.02583 ; infill
G1 X129.598 Y113.688 E0.01747 ; infill
G1 X130.357 Y114.447 E0.03443 ; infill
G1 X130.002 Y114.638 E0.01293 ; infill
G1 X129.054 Y113.689 E0.04303 ; infill
G1 X128.509 Y113.691 E0.01747 ; infill
G1 X129.924 Y115.106 E0.06420 ; infill
G1 X129.926 Y115.653 E0.01756 ; infill
G1 X127.965 Y113.692 E0.08898 ; infill
G1 X127.420 Y113.693 E0.01747 ; infill
G1 X129.498 Y115.771 E0.09427 ; infill
G1 X128.954 Y115.772 E0.01747 ; infill
G1 X126.876 Y113.694 E0.09427 ; infill
G1 X126.331 Y113.695 E0.01747 ; infill
G1 X128.409 Y115.773 E0.09427 ; infill
G1 X127.865 Y115.774 E0.01747 ; infill
G1 X125.618 Y113.527 E0.10196 ; infill
G1 X125.162 Y113.071 F10800.000 ; move to first infill point
G1 F1800.000
G1 X123.030 Y110.939 E0.09675 ; infill
G1 X122.888 Y110.486 E0.01522 ; infill
G1 X122.743 Y110.107 E0.01301 ; infill
G1 X124.991 Y112.355 E0.10197 ; infill
G1 X124.990 Y111.808 E0.01754 ; infill
G1 X122.554 Y109.372 E0.11051 ; infill
G1 X122.656 Y108.928 E0.01461 ; infill
G1 X124.989 Y111.261 E0.10584 ; infill
G1 X124.987 Y110.714 E0.01754 ; infill
G1 X122.730 Y108.457 E0.10241 ; infill
G1 X122.797 Y107.978 E0.01551 ; infill
G1 X124.986 Y110.167 E0.09932 ; infill
G1 X124.985 Y109.621 E0.01754 ; infill
G1 X122.924 Y107.559 E0.09354 ; infill
G1 X123.050 Y107.140 E0.01405 ; infill
G1 X124.984 Y109.074 E0.08775 ; infill
G1 X124.983 Y108.527 E0.01754 ; infill
G1 X123.204 Y106.748 E0.08072 ; infill
G1 X123.393 Y106.392 E0.01294 ; infill
G1 X124.982 Y107.980 E0.07207 ; infill
G1 X124.981 Y107.433 E0.01754 ; infill
G1 X123.583 Y106.036 E0.06342 ; infill
G1 X123.646 Y105.917 E0.00432 ; infill
G1 X123.809 Y105.717 E0.00829 ; infill
G1 X124.979 Y106.887 E0.05308 ; infill
G1 X124.978 Y106.340 E0.01754 ; infill
G1 X124.055 Y105.416 E0.04189 ; infill
G1 X124.300 Y105.116 E0.01244 ; infill
G1 X124.977 Y105.793 E0.03071 ; infill
G1 X124.976 Y105.246 E0.01754 ; infill
G1 X124.588 Y104.858 E0.01760 ; infill
G1 X124.887 Y104.612 E0.01244 ; infill
G1 X125.145 Y104.869 E0.01169 ; infill
G1 X125.447 Y104.626 F10800.000 ; move to first infill point
G1 F1800.000
G1 X125.186 Y104.365 E0.01183 ; infill
G1 X125.536 Y104.169 E0.01286 ; infill
G1 X125.822 Y104.455 E0.01298 ; infill
G1 X126.367 Y104.454 E0.01747 ; infill
G1 X125.891 Y103.979 E0.02158 ; infill
G1 X126.255 Y103.796 E0.01304 ; infill
G1 X126.911 Y104.453 E0.02979 ; infill
G1 X127.456 Y104.452 E0.01747 ; infill
G1 X126.673 Y103.669 E0.03553 ; infill
G1 X127.091 Y103.541 E0.01402 ; infill
G1 X128.000 Y104.451 E0.04128 ; infill
G1 X128.545 Y104.450 E0.01747 ; infill
G1 X127.554 Y103.459 E0.04497 ; infill
G1 X128.049 Y103.409 E0.01599 ; infill
G1 X129.089 Y104.449 E0.04718 ; infill
G1 X129.634 Y104.447 E0.01747 ; infill
G1 X128.582 Y103.395 E0.04773 ; infill
G1 X129.186 Y103.454 E0.01946 ; infill
G1 X130.178 Y104.446 E0.04504 ; infill
G1 X130.723 Y104.445 E0.01747 ; infill
G1 X129.877 Y103.600 E0.03836 ; infill
G1 X130.559 Y103.805 E0.02283 ; infill
G1 X130.707 Y103.883 E0.00538 ; infill
G1 X131.437 Y104.613 E0.03312 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X130.707 Y103.883 E-0.27246 ; wipe and retract
G1 X130.559 Y103.805 E-0.04422 ; wipe and retract
G1 X129.877 Y103.600 E-0.18777 ; wipe and retract
G1 X130.723 Y104.445 E-0.31556 ; wipe and retract
G1 X130.178 Y104.446 E-0.14369 ; wipe and retract
G1 X129.186 Y103.454 E-0.37046 ; wipe and retract
G1 X128.582 Y103.395 E-0.16008 ; wipe and retract
G1 X129.634 Y104.447 E-0.39259 ; wipe and retract
G1 X129.089 Y104.449 E-0.14369 ; wipe and retract
G1 X128.421 Y103.780 E-0.24948 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X130.250 Y116.240 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X130.258 Y119.440 E0.08031 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X130.250 Y116.240 E-0.84431 ; wipe and retract
G1 E-1.55569 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X126.558 Y119.448 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X126.555 Y116.248 E0.07996 ; infill
G1 X127.490 Y115.945 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X126.711 Y115.166 E0.03533 ; infill
G1 X125.907 Y114.362 F10800.000 ; move to first infill point
G1 F1800.000
G1 X123.092 Y111.547 E0.12770 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X125.907 Y114.362 E-1.05040 ; wipe and retract
G1 E-1.34960 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X120.128 Y109.575 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X118.919 Y109.575 E0.00615 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X120.128 Y109.575 E-0.31903 ; wipe and retract
G1 E-2.08097 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X118.851 Y93.302 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X119.583 Y93.302 E0.00366 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X118.851 Y93.302 E-0.19302 ; wipe and retract
G1 E-2.20698 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X121.728 Y93.249 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X121.730 Y93.019 E0.00182 ; infill
G1 X121.754 Y92.788 E0.00254 ; infill
G1 X121.778 Y92.558 E0.00326 ; infill
G1 X121.803 Y92.321 E0.00409 ; infill
G1 X121.816 Y92.143 E0.00365 ; infill
G1 X121.834 Y91.943 E0.00478 ; infill
G1 X121.924 Y91.633 E0.00837 ; infill
G1 X122.014 Y91.324 E0.00906 ; infill
G1 X122.644 Y89.584 F10800.000 ; move to first infill point
G1 F1800.000
G1 X122.712 Y89.429 E0.00141 ; infill
G1 X122.781 Y89.274 E0.00211 ; infill
G1 X122.850 Y89.118 E0.00281 ; infill
G1 X122.918 Y88.963 E0.00351 ; infill
G1 X122.808 Y88.455 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X123.076 Y88.723 E0.01429 ; infill
G1 X123.158 Y88.759 E0.00334 ; infill
G1 X123.440 Y88.448 E0.01584 ; infill
G1 X123.136 Y88.143 E0.01620 ; infill
G1 X123.587 Y87.954 E0.01840 ; infill
G1 X123.865 Y88.232 E0.01479 ; infill
G1 X123.891 Y87.898 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X124.199 Y87.708 E0.00698 ; infill
G1 X124.663 Y87.424 E0.00433 ; infill
G1 X126.304 Y86.746 F10800.000 ; move to first infill point
G1 F1800.000
G1 X126.498 Y86.683 E0.00490 ; infill
G1 X127.070 Y86.529 E0.00922 ; infill
G1 X127.683 Y86.392 E0.00465 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X127.070 Y86.529 E-0.16566 ; wipe and retract
G1 E-2.23434 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X132.017 Y86.392 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X132.274 Y86.450 E0.00210 ; infill
G1 X132.531 Y86.507 E0.00310 ; infill
G1 X132.788 Y86.565 E0.00411 ; infill
G1 X133.008 Y86.620 E0.00413 ; infill
G1 X133.203 Y86.684 E0.00433 ; infill
G1 X133.398 Y86.747 E0.00493 ; infill
G1 X135.040 Y87.425 F10800.000 ; move to first infill point
G1 F1800.000
G1 X135.194 Y87.520 E0.00144 ; infill
G1 X135.349 Y87.615 E0.00213 ; infill
G1 X135.503 Y87.710 E0.00281 ; infill
G1 X135.658 Y87.804 E0.00349 ; infill
G1 X135.812 Y87.899 E0.00418 ; infill
G1 X136.888 Y88.432 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X136.625 Y88.169 E0.01381 ; infill
G1 X136.111 Y87.953 E0.02072 ; infill
G1 X135.990 Y88.149 E0.00855 ; infill
G1 X136.700 Y88.876 E0.03773 ; infill
G1 X136.782 Y88.963 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X136.920 Y89.274 E0.00562 ; infill
G1 X137.057 Y89.584 E0.00282 ; infill
G1 X137.687 Y91.324 F10800.000 ; move to first infill point
G1 F1800.000
G1 X137.867 Y91.943 E0.01674 ; infill
G1 X137.923 Y92.553 E0.01058 ; infill
G1 X137.972 Y93.028 E0.00386 ; infill
G1 X137.974 Y93.233 E0.00179 ; infill
G1 X139.925 Y93.287 F10800.000 ; move to first infill point
G1 F1800.000
G1 X140.770 Y93.287 E0.00400 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X139.925 Y93.287 E-0.22305 ; wipe and retract
G1 E-2.17695 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X144.141 Y97.712 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X143.545 Y97.116 E0.02651 ; infill
G1 X143.544 Y96.581 E0.01685 ; infill
G1 X144.506 Y97.543 E0.04280 ; infill
G1 X145.041 Y97.543 E0.01683 ; infill
G1 X143.543 Y96.045 E0.06663 ; infill
G1 X143.542 Y95.509 E0.01685 ; infill
G1 X145.576 Y97.543 E0.09047 ; infill
G1 X146.111 Y97.543 E0.01683 ; infill
G1 X143.542 Y94.973 E0.11431 ; infill
G1 X143.524 Y94.420 E0.01740 ; infill
G1 X146.646 Y97.543 E0.13889 ; infill
G1 X147.181 Y97.543 E0.01683 ; infill
G1 X143.470 Y93.832 E0.16509 ; infill
G1 X143.414 Y93.241 E0.01867 ; infill
G1 X147.716 Y97.543 E0.19137 ; infill
G1 X148.251 Y97.543 E0.01683 ; infill
G1 X143.468 Y92.759 E0.21280 ; infill
G1 X143.515 Y92.272 E0.01541 ; infill
G1 X148.786 Y97.543 E0.23449 ; infill
G1 X149.158 Y97.543 E0.01171 ; infill
G1 X149.483 Y98.240 E0.02421 ; infill
G1 X150.315 Y99.072 E0.03699 ; infill
G1 X150.544 Y99.133 E0.00745 ; infill
G1 X150.783 Y99.154 E0.00757 ; infill
G1 X150.920 Y99.142 E0.00432 ; infill
G1 X143.532 Y91.754 E0.32867 ; infill
G1 X143.546 Y91.233 E0.01639 ; infill
G1 X151.343 Y99.030 E0.34686 ; infill
G1 X151.474 Y98.969 E0.00454 ; infill
G1 X151.675 Y98.827 E0.00775 ; infill
G1 X143.546 Y90.698 E0.36162 ; infill
G1 X143.546 Y90.163 E0.01683 ; infill
G1 X151.925 Y98.541 E0.37273 ; infill
G1 X151.980 Y98.463 E0.00300 ; infill
G1 X152.108 Y98.189 E0.00951 ; infill
G1 X143.546 Y89.628 E0.38086 ; infill
G1 X143.546 Y89.093 E0.01683 ; infill
G1 X152.278 Y97.824 E0.38843 ; infill
G1 X152.412 Y97.538 E0.00995 ; infill
G1 X152.527 Y97.539 E0.00364 ; infill
G1 X143.546 Y88.558 E0.39953 ; infill
G1 X143.546 Y88.023 E0.01683 ; infill
G1 X153.067 Y97.544 E0.42356 ; infill
G1 X153.612 Y97.554 E0.01715 ; infill
G1 X143.546 Y87.488 E0.44780 ; infill
G1 X143.546 Y86.953 E0.01683 ; infill
G1 X154.201 Y97.608 E0.47398 ; infill
G1 X154.809 Y97.680 E0.01926 ; infill
G1 X143.546 Y86.418 E0.50102 ; infill
G1 X143.546 Y85.883 E0.01683 ; infill
G1 X155.289 Y97.625 E0.52238 ; infill
G1 X155.773 Y97.574 E0.01530 ; infill
G1 X143.546 Y85.348 E0.54389 ; infill
G1 X143.546 Y84.813 E0.01683 ; infill
G1 X156.281 Y97.548 E0.56653 ; infill
G1 X156.815 Y97.547 E0.01680 ; infill
G1 X143.546 Y84.278 E0.59028 ; infill
G1 X143.546 Y84.003 E0.00864 ; infill
G1 X143.807 Y84.003 E0.00818 ; infill
G1 X157.349 Y97.546 E0.60246 ; infill
G1 X157.883 Y97.545 E0.01680 ; infill
G1 X144.342 Y84.003 E0.60241 ; infill
G1 X144.877 Y84.003 E0.01683 ; infill
G1 X158.021 Y97.148 E0.58475 ; infill
G1 X158.022 Y96.613 E0.01682 ; infill
G1 X145.412 Y84.003 E0.56097 ; infill
G1 X145.947 Y84.003 E0.01683 ; infill
G1 X158.022 Y96.078 E0.53719 ; infill
G1 X158.022 Y95.544 E0.01682 ; infill
G1 X146.482 Y84.003 E0.51340 ; infill
G1 X147.017 Y84.003 E0.01683 ; infill
G1 X158.023 Y95.009 E0.48962 ; infill
G1 X158.023 Y94.475 E0.01682 ; infill
G1 X147.552 Y84.003 E0.46584 ; infill
G1 X148.087 Y84.003 E0.01683 ; infill
G1 X158.024 Y93.940 E0.44205 ; infill
G1 X158.024 Y93.405 E0.01682 ; infill
G1 X148.622 Y84.003 E0.41827 ; infill
G1 X149.157 Y84.003 E0.01683 ; infill
G1 X158.024 Y92.871 E0.39449 ; infill
G1 X158.025 Y92.336 E0.01682 ; infill
G1 X149.692 Y84.003 E0.37070 ; infill
G1 X150.227 Y84.003 E0.01683 ; infill
G1 X158.025 Y91.801 E0.34692 ; infill
G1 X158.025 Y91.267 E0.01682 ; infill
G1 X150.762 Y84.003 E0.32314 ; infill
G1 X151.297 Y84.003 E0.01683 ; infill
G1 X158.028 Y90.734 E0.29944 ; infill
G1 X158.056 Y90.228 E0.01596 ; infill
G1 X151.832 Y84.003 E0.27691 ; infill
G1 X152.367 Y84.003 E0.01683 ; infill
G1 X158.110 Y89.746 E0.25549 ; infill
G1 X158.152 Y89.253 E0.01556 ; infill
G1 X152.902 Y84.003 E0.23357 ; infill
G1 X153.437 Y84.003 E0.01683 ; infill
G1 X158.082 Y88.649 E0.20668 ; infill
G1 X158.036 Y88.067 E0.01836 ; infill
G1 X153.972 Y84.003 E0.18079 ; infill
G1 X154.507 Y84.003 E0.01683 ; infill
G1 X158.026 Y87.522 E0.15655 ; infill
G1 X158.026 Y86.987 E0.01683 ; infill
G1 X155.042 Y84.003 E0.13274 ; infill
G1 X155.577 Y84.003 E0.01683 ; infill
G1 X158.025 Y86.452 E0.10894 ; infill
G1 X158.025 Y85.917 E0.01683 ; infill
G1 X156.112 Y84.003 E0.08514 ; infill
G1 X156.646 Y84.003 E0.01682 ; infill
G1 X158.025 Y85.382 E0.06134 ; infill
G1 X158.025 Y84.846 E0.01683 ; infill
G1 X157.164 Y83.986 E0.03830 ; infill
G1 X157.681 Y83.967 E0.01626 ; infill
G1 X158.195 Y84.481 E0.02286 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X157.681 Y83.967 E-0.19179 ; wipe and retract
G1 X157.164 Y83.986 E-0.13642 ; wipe and retract
G1 X158.025 Y84.846 E-0.32129 ; wipe and retract
G1 X158.025 Y85.382 E-0.14121 ; wipe and retract
G1 X156.646 Y84.003 E-0.51458 ; wipe and retract
G1 X156.112 Y84.003 E-0.14113 ; wipe and retract
G1 X158.025 Y85.917 E-0.71420 ; wipe and retract
G1 X158.025 Y86.369 E-0.11938 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.590 Y81.395 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X158.590 Y78.589 E0.01328 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X158.590 Y81.395 E-0.74027 ; wipe and retract
G1 E-1.65973 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X158.513 Y70.704 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X158.513 Y69.196 E0.00769 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X158.513 Y70.704 E-0.39790 ; wipe and retract
G1 E-2.00210 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X145.968 Y74.284 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X148.554 Y74.284 E0.05532 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X145.968 Y74.284 E-0.68254 ; wipe and retract
G1 E-1.71746 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X150.619 Y74.284 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X150.842 Y74.284 E0.00172 ; infill
G1 X151.065 Y74.284 E0.00250 ; infill
G1 X151.289 Y74.284 E0.00328 ; infill
G1 X151.512 Y74.284 E0.00406 ; infill
G1 X151.735 Y74.284 E0.00485 ; infill
G1 X151.958 Y74.284 E0.00563 ; infill
G1 X152.956 Y74.638 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X152.471 Y74.154 E0.02210 ; infill
G1 X152.966 Y74.099 E0.01606 ; infill
G1 X153.423 Y74.556 E0.02086 ; infill
G1 X154.078 Y74.663 E0.02142 ; infill
G1 X153.426 Y74.011 E0.02976 ; infill
G1 X153.898 Y73.933 E0.01541 ; infill
G1 X154.661 Y74.696 E0.03483 ; infill
G1 X155.218 Y74.705 E0.01800 ; infill
G1 X154.398 Y73.885 E0.03743 ; infill
G1 X154.926 Y73.864 E0.01704 ; infill
G1 X155.768 Y74.706 E0.03845 ; infill
G1 X156.319 Y74.707 E0.01775 ; infill
G1 X155.473 Y73.862 E0.03857 ; infill
G1 X156.021 Y73.861 E0.01767 ; infill
G1 X156.869 Y74.709 E0.03868 ; infill
G1 X157.433 Y74.724 E0.01823 ; infill
G1 X156.569 Y73.860 E0.03946 ; infill
G1 X157.116 Y73.858 E0.01767 ; infill
G1 X158.037 Y74.779 E0.04201 ; infill
G1 X158.642 Y74.835 E0.01962 ; infill
G1 X157.634 Y73.827 E0.04601 ; infill
G1 X158.126 Y73.770 E0.01597 ; infill
G1 X159.136 Y74.781 E0.04613 ; infill
G1 X159.639 Y74.734 E0.01628 ; infill
G1 X158.646 Y73.741 E0.04532 ; infill
G1 X159.263 Y73.809 E0.02003 ; infill
G1 X160.170 Y74.717 E0.04142 ; infill
G1 X160.707 Y74.704 E0.01731 ; infill
G1 X159.845 Y73.843 E0.03933 ; infill
G1 X160.412 Y73.861 E0.01832 ; infill
G1 X161.255 Y74.704 E0.03848 ; infill
G1 X161.804 Y74.704 E0.01771 ; infill
G1 X160.964 Y73.864 E0.03837 ; infill
G1 X161.513 Y73.864 E0.01771 ; infill
G1 X162.353 Y74.704 E0.03837 ; infill
G1 X162.902 Y74.704 E0.01771 ; infill
G1 X162.061 Y73.864 E0.03836 ; infill
G1 X162.610 Y73.864 E0.01771 ; infill
G1 X163.451 Y74.704 E0.03836 ; infill
G1 X164.000 Y74.704 E0.01771 ; infill
G1 X163.159 Y73.864 E0.03836 ; infill
G1 X163.708 Y73.864 E0.01771 ; infill
G1 X164.549 Y74.704 E0.03836 ; infill
G1 X165.097 Y74.704 E0.01771 ; infill
G1 X164.257 Y73.864 E0.03836 ; infill
G1 X164.806 Y73.864 E0.01771 ; infill
G1 X165.646 Y74.704 E0.03835 ; infill
G1 X166.195 Y74.704 E0.01771 ; infill
G1 X165.355 Y73.864 E0.03835 ; infill
G1 X165.904 Y73.864 E0.01771 ; infill
G1 X166.744 Y74.704 E0.03835 ; infill
G1 X167.293 Y74.704 E0.01771 ; infill
G1 X166.453 Y73.864 E0.03835 ; infill
G1 X167.002 Y73.864 E0.01771 ; infill
G1 X167.842 Y74.704 E0.03835 ; infill
G1 X168.391 Y74.704 E0.01771 ; infill
G1 X167.550 Y73.864 E0.03834 ; infill
G1 X168.099 Y73.864 E0.01771 ; infill
G1 X168.715 Y74.480 E0.02812 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X168.099 Y73.864 E-0.22990 ; wipe and retract
G1 X167.550 Y73.864 E-0.14485 ; wipe and retract
G1 X168.391 Y74.704 E-0.31354 ; wipe and retract
G1 X167.842 Y74.704 E-0.14484 ; wipe and retract
G1 X167.002 Y73.864 E-0.31355 ; wipe and retract
G1 X166.453 Y73.864 E-0.14485 ; wipe and retract
G1 X167.293 Y74.704 E-0.31357 ; wipe and retract
G1 X166.744 Y74.704 E-0.14484 ; wipe and retract
G1 X165.904 Y73.864 E-0.31359 ; wipe and retract
G1 X165.355 Y73.864 E-0.14485 ; wipe and retract
G1 X165.547 Y74.056 E-0.07162 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X171.616 Y67.140 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X172.997 Y68.521 E0.06140 ; infill
G1 X172.582 Y68.350 E0.01409 ; infill
G1 X172.198 Y68.257 E0.01243 ; infill
G1 X171.229 Y67.289 E0.04306 ; infill
G1 X170.695 Y67.289 E0.01681 ; infill
G1 X171.576 Y68.170 E0.03920 ; infill
G1 X171.016 Y68.145 E0.01764 ; infill
G1 X170.160 Y67.289 E0.03806 ; infill
G1 X169.625 Y67.289 E0.01681 ; infill
G1 X170.481 Y68.145 E0.03807 ; infill
G1 X169.946 Y68.145 E0.01681 ; infill
G1 X169.090 Y67.289 E0.03807 ; infill
G1 X168.556 Y67.289 E0.01681 ; infill
G1 X169.412 Y68.145 E0.03807 ; infill
G1 X168.877 Y68.145 E0.01681 ; infill
G1 X168.021 Y67.289 E0.03807 ; infill
G1 X167.486 Y67.289 E0.01681 ; infill
G1 X168.342 Y68.145 E0.03807 ; infill
G1 X167.808 Y68.145 E0.01681 ; infill
G1 X166.951 Y67.288 E0.03808 ; infill
G1 X166.416 Y67.288 E0.01681 ; infill
G1 X167.273 Y68.145 E0.03808 ; infill
G1 X166.738 Y68.145 E0.01681 ; infill
G1 X165.882 Y67.288 E0.03808 ; infill
G1 X165.347 Y67.288 E0.01681 ; infill
G1 X166.203 Y68.145 E0.03808 ; infill
G1 X165.669 Y68.145 E0.01681 ; infill
G1 X164.812 Y67.288 E0.03808 ; infill
G1 X164.277 Y67.288 E0.01681 ; infill
G1 X165.134 Y68.145 E0.03809 ; infill
G1 X164.599 Y68.145 E0.01681 ; infill
G1 X163.743 Y67.288 E0.03809 ; infill
G1 X163.208 Y67.288 E0.01681 ; infill
G1 X164.064 Y68.145 E0.03809 ; infill
G1 X163.530 Y68.145 E0.01681 ; infill
G1 X162.673 Y67.288 E0.03809 ; infill
G1 X162.138 Y67.288 E0.01681 ; infill
G1 X162.995 Y68.145 E0.03809 ; infill
G1 X162.460 Y68.145 E0.01681 ; infill
G1 X161.603 Y67.288 E0.03810 ; infill
G1 X161.069 Y67.288 E0.01681 ; infill
G1 X161.925 Y68.145 E0.03810 ; infill
G1 X161.391 Y68.145 E0.01681 ; infill
G1 X160.534 Y67.288 E0.03810 ; infill
G1 X159.999 Y67.288 E0.01681 ; infill
G1 X160.856 Y68.145 E0.03810 ; infill
G1 X160.321 Y68.145 E0.01681 ; infill
G1 X159.464 Y67.288 E0.03810 ; infill
G1 X158.930 Y67.288 E0.01681 ; infill
G1 X159.787 Y68.145 E0.03811 ; infill
G1 X159.252 Y68.145 E0.01681 ; infill
G1 X158.395 Y67.288 E0.03811 ; infill
G1 X157.860 Y67.288 E0.01681 ; infill
G1 X158.717 Y68.145 E0.03811 ; infill
G1 X158.182 Y68.145 E0.01681 ; infill
G1 X157.325 Y67.288 E0.03811 ; infill
G1 X156.790 Y67.288 E0.01681 ; infill
G1 X157.648 Y68.145 E0.03811 ; infill
G1 X157.113 Y68.145 E0.01681 ; infill
G1 X156.256 Y67.288 E0.03812 ; infill
G1 X155.721 Y67.287 E0.01681 ; infill
G1 X156.578 Y68.145 E0.03812 ; infill
G1 X156.043 Y68.145 E0.01681 ; infill
G1 X155.186 Y67.287 E0.03812 ; infill
G1 X154.651 Y67.287 E0.01681 ; infill
G1 X155.509 Y68.145 E0.03812 ; infill
G1 X154.974 Y68.145 E0.01681 ; infill
G1 X154.117 Y67.287 E0.03813 ; infill
G1 X153.582 Y67.287 E0.01681 ; infill
G1 X154.439 Y68.145 E0.03813 ; infill
G1 X153.905 Y68.145 E0.01681 ; infill
G1 X153.047 Y67.287 E0.03813 ; infill
G1 X152.512 Y67.287 E0.01681 ; infill
G1 X153.370 Y68.145 E0.03813 ; infill
G1 X152.835 Y68.145 E0.01681 ; infill
G1 X151.977 Y67.287 E0.03813 ; infill
G1 X151.443 Y67.287 E0.01681 ; infill
G1 X152.300 Y68.145 E0.03814 ; infill
G1 X151.766 Y68.145 E0.01681 ; infill
G1 X150.908 Y67.287 E0.03814 ; infill
G1 X150.373 Y67.287 E0.01681 ; infill
G1 X151.231 Y68.145 E0.03814 ; infill
G1 X150.696 Y68.145 E0.01681 ; infill
G1 X149.838 Y67.287 E0.03814 ; infill
G1 X149.304 Y67.287 E0.01681 ; infill
G1 X150.161 Y68.145 E0.03814 ; infill
G1 X149.627 Y68.145 E0.01681 ; infill
G1 X148.769 Y67.287 E0.03815 ; infill
G1 X148.234 Y67.287 E0.01681 ; infill
G1 X149.092 Y68.145 E0.03815 ; infill
G1 X148.557 Y68.145 E0.01681 ; infill
G1 X147.699 Y67.287 E0.03815 ; infill
G1 X147.164 Y67.287 E0.01681 ; infill
G1 X148.023 Y68.145 E0.03815 ; infill
G1 X147.488 Y68.145 E0.01681 ; infill
G1 X146.630 Y67.287 E0.03815 ; infill
G1 X146.095 Y67.287 E0.01681 ; infill
G1 X146.953 Y68.145 E0.03816 ; infill
G1 X146.418 Y68.145 E0.01681 ; infill
G1 X145.560 Y67.287 E0.03816 ; infill
G1 X145.025 Y67.287 E0.01681 ; infill
G1 X145.884 Y68.145 E0.03816 ; infill
G1 X145.349 Y68.145 E0.01681 ; infill
G1 X144.491 Y67.287 E0.03816 ; infill
G1 X143.956 Y67.286 E0.01681 ; infill
G1 X144.814 Y68.145 E0.03816 ; infill
G1 X144.279 Y68.145 E0.01681 ; infill
G1 X143.421 Y67.286 E0.03817 ; infill
G1 X142.886 Y67.286 E0.01681 ; infill
G1 X143.745 Y68.145 E0.03817 ; infill
G1 X143.210 Y68.145 E0.01681 ; infill
G1 X142.351 Y67.286 E0.03817 ; infill
G1 X141.817 Y67.286 E0.01681 ; infill
G1 X142.675 Y68.145 E0.03817 ; infill
G1 X142.141 Y68.145 E0.01681 ; infill
G1 X141.282 Y67.286 E0.03817 ; infill
G1 X140.747 Y67.286 E0.01681 ; infill
G1 X141.669 Y68.208 E0.04099 ; infill
G1 X141.669 Y68.743 E0.01681 ; infill
G1 X140.212 Y67.286 E0.06477 ; infill
G1 X139.678 Y67.286 E0.01681 ; infill
G1 X141.669 Y69.278 E0.08855 ; infill
G1 X141.669 Y69.812 E0.01681 ; infill
G1 X139.143 Y67.286 E0.11232 ; infill
G1 X138.608 Y67.286 E0.01681 ; infill
G1 X141.669 Y70.347 E0.13610 ; infill
G1 X141.669 Y70.882 E0.01681 ; infill
G1 X138.073 Y67.286 E0.15988 ; infill
G1 X137.538 Y67.286 E0.01681 ; infill
G1 X141.669 Y71.416 E0.18366 ; infill
G1 X141.669 Y71.951 E0.01681 ; infill
G1 X137.004 Y67.286 E0.20743 ; infill
G1 X136.469 Y67.286 E0.01681 ; infill
G1 X141.669 Y72.486 E0.23121 ; infill
G1 X141.669 Y73.021 E0.01681 ; infill
G1 X135.934 Y67.286 E0.25499 ; infill
G1 X135.399 Y67.286 E0.01681 ; infill
G1 X141.669 Y73.555 E0.27877 ; infill
G1 X141.669 Y73.677 E0.00383 ; infill
G1 X141.463 Y73.884 E0.00918 ; infill
G1 X134.865 Y67.286 E0.29337 ; infill
G1 X134.330 Y67.286 E0.01681 ; infill
G1 X141.195 Y74.151 E0.30526 ; infill
G1 X140.928 Y74.418 E0.01189 ; infill
G1 X133.795 Y67.286 E0.31715 ; infill
G1 X133.260 Y67.286 E0.01681 ; infill
G1 X140.620 Y74.645 E0.32722 ; infill
G1 X140.085 Y74.645 E0.01681 ; infill
G1 X132.725 Y67.285 E0.32722 ; infill
G1 X132.191 Y67.285 E0.01681 ; infill
G1 X139.550 Y74.645 E0.32722 ; infill
G1 X139.015 Y74.645 E0.01681 ; infill
G1 X131.656 Y67.285 E0.32722 ; infill
G1 X131.121 Y67.285 E0.01681 ; infill
G1 X138.481 Y74.645 E0.32722 ; infill
G1 X137.946 Y74.645 E0.01681 ; infill
G1 X130.586 Y67.285 E0.32723 ; infill
G1 X130.052 Y67.285 E0.01681 ; infill
G1 X137.411 Y74.645 E0.32723 ; infill
G1 X136.876 Y74.645 E0.01681 ; infill
G1 X129.517 Y67.285 E0.32723 ; infill
G1 X128.982 Y67.285 E0.01681 ; infill
G1 X136.342 Y74.645 E0.32723 ; infill
G1 X135.807 Y74.645 E0.01681 ; infill
G1 X128.447 Y67.285 E0.32723 ; infill
G1 X127.913 Y67.285 E0.01681 ; infill
G1 X135.272 Y74.645 E0.32724 ; infill
G1 X134.738 Y74.645 E0.01681 ; infill
G1 X127.378 Y67.285 E0.32724 ; infill
G1 X126.843 Y67.285 E0.01681 ; infill
G1 X134.203 Y74.645 E0.32724 ; infill
G1 X133.668 Y74.645 E0.01681 ; infill
G1 X126.308 Y67.285 E0.32724 ; infill
G1 X125.773 Y67.285 E0.01681 ; infill
G1 X133.133 Y74.645 E0.32724 ; infill
G1 X132.599 Y74.645 E0.01681 ; infill
G1 X125.239 Y67.285 E0.32725 ; infill
G1 X124.704 Y67.285 E0.01681 ; infill
G1 X132.064 Y74.645 E0.32725 ; infill
G1 X131.529 Y74.645 E0.01681 ; infill
G1 X124.169 Y67.285 E0.32725 ; infill
G1 X123.634 Y67.285 E0.01681 ; infill
G1 X130.994 Y74.645 E0.32725 ; infill
G1 X130.460 Y74.645 E0.01681 ; infill
G1 X123.100 Y67.285 E0.32725 ; infill
G1 X122.565 Y67.285 E0.01681 ; infill
G1 X129.925 Y74.645 E0.32726 ; infill
G1 X129.390 Y74.645 E0.01681 ; infill
G1 X122.030 Y67.285 E0.32726 ; infill
G1 X121.532 Y67.322 E0.01569 ; infill
G1 X128.855 Y74.645 E0.32561 ; infill
G1 X128.321 Y74.645 E0.01681 ; infill
G1 X121.057 Y67.381 E0.32298 ; infill
G1 X120.626 Y67.484 E0.01394 ; infill
G1 X127.786 Y74.645 E0.31837 ; infill
G1 X127.251 Y74.645 E0.01681 ; infill
G1 X120.225 Y67.618 E0.31243 ; infill
G1 X119.847 Y67.775 E0.01287 ; infill
G1 X126.717 Y74.645 E0.30546 ; infill
G1 X126.182 Y74.645 E0.01681 ; infill
G1 X119.500 Y67.963 E0.29709 ; infill
G1 X119.169 Y68.166 E0.01223 ; infill
G1 X125.647 Y74.645 E0.28806 ; infill
G1 X125.112 Y74.645 E0.01681 ; infill
G1 X118.867 Y68.399 E0.27769 ; infill
G1 X118.578 Y68.646 E0.01192 ; infill
G1 X124.578 Y74.645 E0.26674 ; infill
G1 X124.043 Y74.645 E0.01681 ; infill
G1 X118.318 Y68.919 E0.25457 ; infill
G1 X118.071 Y69.208 E0.01192 ; infill
G1 X123.508 Y74.645 E0.24174 ; infill
G1 X122.973 Y74.645 E0.01681 ; infill
G1 X117.851 Y69.523 E0.22774 ; infill
G1 X117.648 Y69.854 E0.01223 ; infill
G1 X122.439 Y74.645 E0.21300 ; infill
G1 X121.904 Y74.645 E0.01681 ; infill
G1 X117.474 Y70.215 E0.19696 ; infill
G1 X117.318 Y70.593 E0.01287 ; infill
G1 X121.369 Y74.645 E0.18014 ; infill
G1 X120.835 Y74.645 E0.01681 ; infill
G1 X117.200 Y71.011 E0.16159 ; infill
G1 X117.097 Y71.442 E0.01394 ; infill
G1 X120.300 Y74.645 E0.14242 ; infill
G1 X119.765 Y74.645 E0.01681 ; infill
G1 X117.057 Y71.937 E0.12039 ; infill
G1 X117.032 Y72.447 E0.01604 ; infill
G1 X119.230 Y74.645 E0.09773 ; infill
G1 X118.696 Y74.645 E0.01681 ; infill
G1 X117.032 Y72.981 E0.07396 ; infill
G1 X117.032 Y73.516 E0.01681 ; infill
G1 X118.161 Y74.645 E0.05018 ; infill
G1 X117.893 Y74.645 E0.00844 ; infill
G1 X117.893 Y74.911 E0.00838 ; infill
G1 X117.032 Y74.051 E0.03825 ; infill
G1 X117.032 Y74.586 E0.01681 ; infill
G1 X117.893 Y75.446 E0.03825 ; infill
G1 X117.893 Y75.981 E0.01681 ; infill
G1 X117.032 Y75.120 E0.03825 ; infill
G1 X117.032 Y75.655 E0.01681 ; infill
G1 X117.893 Y76.515 E0.03825 ; infill
G1 X117.893 Y77.050 E0.01681 ; infill
G1 X117.032 Y76.190 E0.03825 ; infill
G1 X117.032 Y76.725 E0.01681 ; infill
G1 X117.893 Y77.585 E0.03825 ; infill
G1 X117.893 Y78.120 E0.01681 ; infill
G1 X117.032 Y77.259 E0.03825 ; infill
G1 X117.032 Y77.794 E0.01681 ; infill
G1 X117.893 Y78.654 E0.03825 ; infill
G1 X117.893 Y79.189 E0.01681 ; infill
G1 X117.032 Y78.329 E0.03825 ; infill
G1 X117.032 Y78.863 E0.01681 ; infill
G1 X117.893 Y79.724 E0.03825 ; infill
G1 X117.893 Y80.258 E0.01681 ; infill
G1 X117.032 Y79.398 E0.03825 ; infill
G1 X117.032 Y79.933 E0.01681 ; infill
G1 X117.893 Y80.793 E0.03825 ; infill
G1 X117.893 Y81.328 E0.01681 ; infill
G1 X117.032 Y80.468 E0.03825 ; infill
G1 X117.032 Y81.002 E0.01681 ; infill
G1 X117.893 Y81.863 E0.03825 ; infill
G1 X117.893 Y82.397 E0.01681 ; infill
G1 X117.032 Y81.537 E0.03825 ; infill
G1 X117.032 Y82.072 E0.01681 ; infill
G1 X117.893 Y82.932 E0.03825 ; infill
G1 X117.893 Y83.467 E0.01681 ; infill
G1 X117.032 Y82.607 E0.03825 ; infill
G1 X117.032 Y83.141 E0.01681 ; infill
G1 X117.893 Y84.002 E0.03825 ; infill
G1 X117.893 Y84.536 E0.01681 ; infill
G1 X117.032 Y83.676 E0.03825 ; infill
G1 X117.032 Y84.211 E0.01681 ; infill
G1 X117.893 Y85.071 E0.03825 ; infill
G1 X117.893 Y85.606 E0.01681 ; infill
G1 X117.032 Y84.746 E0.03825 ; infill
G1 X117.032 Y85.280 E0.01681 ; infill
G1 X117.893 Y86.140 E0.03825 ; infill
G1 X117.893 Y86.675 E0.01681 ; infill
G1 X117.032 Y85.815 E0.03825 ; infill
G1 X117.032 Y86.350 E0.01681 ; infill
G1 X117.893 Y87.210 E0.03825 ; infill
G1 X117.893 Y87.745 E0.01681 ; infill
G1 X117.032 Y86.884 E0.03825 ; infill
G1 X117.032 Y87.419 E0.01681 ; infill
G1 X117.893 Y88.279 E0.03825 ; infill
G1 X117.893 Y88.814 E0.01681 ; infill
G1 X117.032 Y87.954 E0.03825 ; infill
G1 X117.032 Y88.489 E0.01681 ; infill
G1 X117.893 Y89.349 E0.03825 ; infill
G1 X117.893 Y89.884 E0.01681 ; infill
G1 X117.032 Y89.023 E0.03825 ; infill
G1 X117.032 Y89.558 E0.01681 ; infill
G1 X117.893 Y90.418 E0.03825 ; infill
G1 X117.893 Y90.953 E0.01681 ; infill
G1 X117.032 Y90.093 E0.03825 ; infill
G1 X117.032 Y90.628 E0.01681 ; infill
G1 X117.893 Y91.488 E0.03825 ; infill
G1 X117.893 Y92.022 E0.01681 ; infill
G1 X117.032 Y91.162 E0.03825 ; infill
G1 X117.032 Y91.697 E0.01681 ; infill
G1 X117.893 Y92.557 E0.03825 ; infill
G1 X117.893 Y93.092 E0.01681 ; infill
G1 X117.032 Y92.232 E0.03825 ; infill
G1 X117.032 Y92.766 E0.01681 ; infill
G1 X117.893 Y93.627 E0.03825 ; infill
G1 X117.893 Y94.161 E0.01681 ; infill
G1 X117.032 Y93.301 E0.03825 ; infill
G1 X117.032 Y93.836 E0.01681 ; infill
G1 X117.893 Y94.696 E0.03825 ; infill
G1 X117.893 Y95.231 E0.01681 ; infill
G1 X117.032 Y94.371 E0.03825 ; infill
G1 X117.032 Y94.905 E0.01681 ; infill
G1 X117.893 Y95.766 E0.03825 ; infill
G1 X117.893 Y96.300 E0.01681 ; infill
G1 X117.032 Y95.440 E0.03825 ; infill
G1 X117.032 Y95.975 E0.01681 ; infill
G1 X117.893 Y96.835 E0.03825 ; infill
G1 X117.893 Y97.370 E0.01681 ; infill
G1 X117.032 Y96.510 E0.03825 ; infill
G1 X117.032 Y97.044 E0.01681 ; infill
G1 X117.893 Y97.905 E0.03825 ; infill
G1 X117.893 Y98.439 E0.01681 ; infill
G1 X117.032 Y97.579 E0.03825 ; infill
G1 X117.032 Y98.114 E0.01681 ; infill
G1 X117.893 Y98.974 E0.03825 ; infill
G1 X117.893 Y99.509 E0.01681 ; infill
G1 X117.032 Y98.648 E0.03825 ; infill
G1 X117.032 Y99.183 E0.01681 ; infill
G1 X117.893 Y100.043 E0.03825 ; infill
G1 X117.893 Y100.578 E0.01681 ; infill
G1 X117.032 Y99.718 E0.03825 ; infill
G1 X117.032 Y100.253 E0.01681 ; infill
G1 X117.893 Y101.113 E0.03825 ; infill
G1 X117.893 Y101.648 E0.01681 ; infill
G1 X117.032 Y100.787 E0.03825 ; infill
G1 X117.032 Y101.322 E0.01681 ; infill
G1 X117.893 Y102.182 E0.03825 ; infill
G1 X117.893 Y102.717 E0.01681 ; infill
G1 X117.032 Y101.857 E0.03825 ; infill
G1 X117.032 Y102.392 E0.01681 ; infill
G1 X117.893 Y103.252 E0.03825 ; infill
G1 X117.893 Y103.787 E0.01681 ; infill
G1 X117.032 Y102.926 E0.03825 ; infill
G1 X117.032 Y103.461 E0.01681 ; infill
G1 X117.893 Y104.321 E0.03825 ; infill
G1 X117.893 Y104.856 E0.01681 ; infill
G1 X117.032 Y103.996 E0.03825 ; infill
G1 X117.032 Y104.531 E0.01681 ; infill
G1 X117.893 Y105.391 E0.03825 ; infill
G1 X117.893 Y105.926 E0.01681 ; infill
G1 X117.032 Y105.065 E0.03825 ; infill
G1 X117.032 Y105.600 E0.01681 ; infill
G1 X117.893 Y106.460 E0.03825 ; infill
G1 X117.893 Y106.995 E0.01681 ; infill
G1 X117.032 Y106.135 E0.03825 ; infill
G1 X117.032 Y106.669 E0.01681 ; infill
G1 X117.893 Y107.530 E0.03825 ; infill
G1 X117.893 Y108.064 E0.01681 ; infill
G1 X117.032 Y107.204 E0.03825 ; infill
G1 X117.032 Y107.739 E0.01681 ; infill
G1 X117.893 Y108.599 E0.03825 ; infill
G1 X117.893 Y109.134 E0.01681 ; infill
G1 X117.032 Y108.274 E0.03825 ; infill
G1 X117.032 Y108.808 E0.01681 ; infill
G1 X117.893 Y109.669 E0.03825 ; infill
G1 X117.893 Y110.203 E0.01681 ; infill
G1 X117.032 Y109.343 E0.03825 ; infill
G1 X117.032 Y109.878 E0.01681 ; infill
G1 X117.893 Y110.738 E0.03825 ; infill
G1 X117.893 Y111.273 E0.01681 ; infill
G1 X117.032 Y110.413 E0.03825 ; infill
G1 X117.032 Y110.947 E0.01681 ; infill
G1 X117.893 Y111.808 E0.03825 ; infill
G1 X117.893 Y112.342 E0.01681 ; infill
G1 X117.032 Y111.482 E0.03825 ; infill
G1 X117.032 Y112.017 E0.01681 ; infill
G1 X117.893 Y112.877 E0.03825 ; infill
G1 X117.893 Y113.412 E0.01681 ; infill
G1 X117.032 Y112.551 E0.03825 ; infill
G1 X117.032 Y113.086 E0.01681 ; infill
G1 X117.893 Y113.946 E0.03825 ; infill
G1 X117.893 Y114.481 E0.01681 ; infill
G1 X117.032 Y113.621 E0.03825 ; infill
G1 X117.032 Y114.156 E0.01681 ; infill
G1 X117.893 Y115.016 E0.03825 ; infill
G1 X117.893 Y115.551 E0.01681 ; infill
G1 X117.032 Y114.690 E0.03825 ; infill
G1 X117.032 Y115.225 E0.01681 ; infill
G1 X117.893 Y116.085 E0.03825 ; infill
G1 X117.893 Y116.620 E0.01681 ; infill
G1 X117.032 Y115.760 E0.03825 ; infill
G1 X117.032 Y116.295 E0.01681 ; infill
G1 X117.893 Y117.155 E0.03825 ; infill
G1 X117.893 Y117.690 E0.01681 ; infill
G1 X117.032 Y116.829 E0.03825 ; infill
G1 X117.032 Y117.364 E0.01681 ; infill
G1 X117.893 Y118.224 E0.03825 ; infill
G1 X117.893 Y118.759 E0.01681 ; infill
G1 X117.032 Y117.899 E0.03825 ; infill
G1 X117.032 Y118.433 E0.01681 ; infill
G1 X117.893 Y119.294 E0.03825 ; infill
G1 X117.893 Y119.828 E0.01681 ; infill
G1 X117.032 Y118.968 E0.03825 ; infill
G1 X117.032 Y119.503 E0.01681 ; infill
G1 X117.893 Y120.363 E0.03825 ; infill
G1 X117.893 Y120.898 E0.01681 ; infill
G1 X117.032 Y120.038 E0.03825 ; infill
G1 X117.032 Y120.572 E0.01681 ; infill
G1 X117.893 Y121.433 E0.03825 ; infill
G1 X117.893 Y121.967 E0.01681 ; infill
G1 X117.032 Y121.107 E0.03825 ; infill
G1 X117.032 Y121.642 E0.01681 ; infill
G1 X117.893 Y122.502 E0.03825 ; infill
G1 X117.893 Y123.037 E0.01681 ; infill
G1 X117.032 Y122.177 E0.03825 ; infill
G1 X117.032 Y122.711 E0.01681 ; infill
G1 X117.893 Y123.572 E0.03825 ; infill
G1 X117.893 Y124.106 E0.01681 ; infill
G1 X117.032 Y123.246 E0.03825 ; infill
G1 X117.032 Y123.781 E0.01681 ; infill
G1 X117.893 Y124.641 E0.03825 ; infill
G1 X117.893 Y125.176 E0.01681 ; infill
G1 X117.032 Y124.316 E0.03825 ; infill
G1 X117.032 Y124.850 E0.01681 ; infill
G1 X117.893 Y125.710 E0.03825 ; infill
G1 X117.893 Y126.245 E0.01681 ; infill
G1 X117.032 Y125.385 E0.03825 ; infill
G1 X117.032 Y125.920 E0.01681 ; infill
G1 X117.893 Y126.780 E0.03825 ; infill
G1 X117.893 Y127.315 E0.01681 ; infill
G1 X117.032 Y126.454 E0.03825 ; infill
G1 X117.032 Y126.989 E0.01681 ; infill
G1 X117.893 Y127.849 E0.03825 ; infill
G1 X117.893 Y128.384 E0.01681 ; infill
G1 X117.032 Y127.524 E0.03825 ; infill
G1 X117.032 Y128.059 E0.01681 ; infill
G1 X117.893 Y128.919 E0.03825 ; infill
G1 X117.893 Y129.454 E0.01681 ; infill
G1 X117.032 Y128.593 E0.03825 ; infill
G1 X117.032 Y129.128 E0.01681 ; infill
G1 X117.893 Y129.988 E0.03825 ; infill
G1 X117.893 Y130.523 E0.01681 ; infill
G1 X117.032 Y129.663 E0.03825 ; infill
G1 X117.032 Y130.198 E0.01681 ; infill
G1 X117.893 Y131.058 E0.03825 ; infill
G1 X117.893 Y131.593 E0.01681 ; infill
G1 X117.032 Y130.732 E0.03825 ; infill
G1 X117.032 Y131.267 E0.01681 ; infill
G1 X117.893 Y132.127 E0.03825 ; infill
G1 X117.893 Y132.662 E0.01681 ; infill
G1 X117.032 Y131.802 E0.03825 ; infill
G1 X117.032 Y132.336 E0.01681 ; infill
G1 X117.893 Y133.197 E0.03825 ; infill
G1 X117.893 Y133.731 E0.01681 ; infill
G1 X117.032 Y132.871 E0.03825 ; infill
G1 X117.032 Y133.406 E0.01681 ; infill
G1 X117.893 Y134.266 E0.03825 ; infill
G1 X117.893 Y134.801 E0.01681 ; infill
G1 X117.032 Y133.941 E0.03825 ; infill
G1 X117.032 Y134.475 E0.01681 ; infill
G1 X117.893 Y135.336 E0.03825 ; infill
G1 X117.893 Y135.870 E0.01681 ; infill
G1 X117.032 Y135.010 E0.03825 ; infill
G1 X117.032 Y135.545 E0.01681 ; infill
G1 X117.893 Y136.405 E0.03825 ; infill
G1 X117.893 Y136.940 E0.01681 ; infill
G1 X117.032 Y136.080 E0.03825 ; infill
G1 X117.032 Y136.614 E0.01681 ; infill
G1 X117.893 Y137.475 E0.03825 ; infill
G1 X117.918 Y138.035 E0.01764 ; infill
G1 X117.032 Y137.149 E0.03939 ; infill
G1 X117.032 Y137.684 E0.01681 ; infill
G1 X118.005 Y138.657 E0.04325 ; infill
G1 X118.097 Y139.041 E0.01244 ; infill
G1 X118.269 Y139.455 E0.01409 ; infill
G1 X117.073 Y138.259 E0.05318 ; infill
G1 X117.096 Y138.556 E0.00937 ; infill
G1 X117.179 Y138.900 E0.01111 ; infill
G1 X120.848 Y142.569 E0.16315 ; infill
G1 X121.192 Y142.651 E0.01111 ; infill
G1 X121.489 Y142.675 E0.00937 ; infill
G1 X120.293 Y141.479 E0.05318 ; infill
G1 X120.707 Y141.650 E0.01409 ; infill
G1 X121.091 Y141.743 E0.01244 ; infill
G1 X122.064 Y142.715 E0.04325 ; infill
G1 X122.599 Y142.715 E0.01681 ; infill
G1 X121.713 Y141.830 E0.03939 ; infill
G1 X122.273 Y141.855 E0.01764 ; infill
G1 X123.133 Y142.715 E0.03825 ; infill
G1 X123.668 Y142.715 E0.01681 ; infill
G1 X122.808 Y141.855 E0.03825 ; infill
G1 X123.343 Y141.855 E0.01681 ; infill
G1 X124.203 Y142.715 E0.03825 ; infill
G1 X124.738 Y142.715 E0.01681 ; infill
G1 X123.877 Y141.855 E0.03825 ; infill
G1 X124.412 Y141.855 E0.01681 ; infill
G1 X125.272 Y142.715 E0.03825 ; infill
G1 X125.807 Y142.715 E0.01681 ; infill
G1 X124.947 Y141.855 E0.03825 ; infill
G1 X125.482 Y141.855 E0.01681 ; infill
G1 X126.342 Y142.715 E0.03825 ; infill
G1 X126.877 Y142.715 E0.01681 ; infill
G1 X126.016 Y141.855 E0.03825 ; infill
G1 X126.551 Y141.855 E0.01681 ; infill
G1 X127.411 Y142.715 E0.03825 ; infill
G1 X127.946 Y142.715 E0.01681 ; infill
G1 X127.086 Y141.855 E0.03825 ; infill
G1 X127.620 Y141.855 E0.01681 ; infill
G1 X128.481 Y142.715 E0.03825 ; infill
G1 X129.015 Y142.715 E0.01681 ; infill
G1 X128.155 Y141.855 E0.03825 ; infill
G1 X128.690 Y141.855 E0.01681 ; infill
G1 X129.550 Y142.715 E0.03825 ; infill
G1 X130.085 Y142.715 E0.01681 ; infill
G1 X129.225 Y141.855 E0.03825 ; infill
G1 X129.759 Y141.855 E0.01681 ; infill
G1 X130.620 Y142.715 E0.03825 ; infill
G1 X131.154 Y142.715 E0.01681 ; infill
G1 X130.294 Y141.855 E0.03825 ; infill
G1 X130.829 Y141.855 E0.01681 ; infill
G1 X131.689 Y142.715 E0.03825 ; infill
G1 X132.224 Y142.715 E0.01681 ; infill
G1 X131.364 Y141.855 E0.03825 ; infill
G1 X131.898 Y141.855 E0.01681 ; infill
G1 X132.759 Y142.715 E0.03825 ; infill
G1 X133.293 Y142.715 E0.01681 ; infill
G1 X132.433 Y141.855 E0.03825 ; infill
G1 X132.968 Y141.855 E0.01681 ; infill
G1 X133.828 Y142.715 E0.03825 ; infill
G1 X134.363 Y142.715 E0.01681 ; infill
G1 X133.503 Y141.855 E0.03825 ; infill
G1 X134.037 Y141.855 E0.01681 ; infill
G1 X134.898 Y142.715 E0.03825 ; infill
G1 X135.432 Y142.715 E0.01681 ; infill
G1 X134.572 Y141.855 E0.03825 ; infill
G1 X135.107 Y141.855 E0.01681 ; infill
G1 X135.967 Y142.715 E0.03825 ; infill
G1 X136.502 Y142.715 E0.01681 ; infill
G1 X135.641 Y141.855 E0.03825 ; infill
G1 X136.176 Y141.855 E0.01681 ; infill
G1 X137.036 Y142.715 E0.03825 ; infill
G1 X137.571 Y142.715 E0.01681 ; infill
G1 X136.711 Y141.855 E0.03825 ; infill
G1 X137.246 Y141.855 E0.01681 ; infill
G1 X138.106 Y142.715 E0.03825 ; infill
G1 X138.641 Y142.715 E0.01681 ; infill
G1 X137.780 Y141.855 E0.03825 ; infill
G1 X138.315 Y141.855 E0.01681 ; infill
G1 X139.175 Y142.715 E0.03825 ; infill
G1 X139.710 Y142.715 E0.01681 ; infill
G1 X138.850 Y141.855 E0.03825 ; infill
G1 X139.385 Y141.855 E0.01681 ; infill
G1 X140.245 Y142.715 E0.03825 ; infill
G1 X140.780 Y142.715 E0.01681 ; infill
G1 X139.919 Y141.855 E0.03825 ; infill
G1 X140.454 Y141.855 E0.01681 ; infill
G1 X141.314 Y142.715 E0.03825 ; infill
G1 X141.849 Y142.715 E0.01681 ; infill
G1 X140.989 Y141.855 E0.03825 ; infill
G1 X141.523 Y141.855 E0.01681 ; infill
G1 X142.384 Y142.715 E0.03825 ; infill
G1 X142.918 Y142.715 E0.01681 ; infill
G1 X142.058 Y141.855 E0.03825 ; infill
G1 X142.593 Y141.855 E0.01681 ; infill
G1 X143.453 Y142.715 E0.03825 ; infill
G1 X143.988 Y142.715 E0.01681 ; infill
G1 X143.128 Y141.855 E0.03825 ; infill
G1 X143.662 Y141.855 E0.01681 ; infill
G1 X144.523 Y142.715 E0.03825 ; infill
G1 X145.057 Y142.715 E0.01681 ; infill
G1 X144.197 Y141.855 E0.03825 ; infill
G1 X144.732 Y141.855 E0.01681 ; infill
G1 X145.592 Y142.715 E0.03825 ; infill
G1 X146.127 Y142.715 E0.01681 ; infill
G1 X145.267 Y141.855 E0.03825 ; infill
G1 X145.801 Y141.855 E0.01681 ; infill
G1 X146.662 Y142.715 E0.03825 ; infill
G1 X147.196 Y142.715 E0.01681 ; infill
G1 X146.336 Y141.855 E0.03825 ; infill
G1 X146.871 Y141.855 E0.01681 ; infill
G1 X147.731 Y142.715 E0.03825 ; infill
G1 X148.266 Y142.715 E0.01681 ; infill
G1 X147.405 Y141.855 E0.03825 ; infill
G1 X147.940 Y141.855 E0.01681 ; infill
G1 X148.800 Y142.715 E0.03825 ; infill
G1 X149.335 Y142.715 E0.01681 ; infill
G1 X148.475 Y141.855 E0.03825 ; infill
G1 X149.010 Y141.855 E0.01681 ; infill
G1 X149.870 Y142.715 E0.03825 ; infill
G1 X150.405 Y142.715 E0.01681 ; infill
G1 X149.544 Y141.855 E0.03825 ; infill
G1 X150.079 Y141.855 E0.01681 ; infill
G1 X150.939 Y142.715 E0.03825 ; infill
G1 X151.474 Y142.715 E0.01681 ; infill
G1 X150.614 Y141.855 E0.03825 ; infill
G1 X151.149 Y141.855 E0.01681 ; infill
G1 X152.009 Y142.715 E0.03825 ; infill
G1 X152.544 Y142.715 E0.01681 ; infill
G1 X151.683 Y141.855 E0.03825 ; infill
G1 X152.218 Y141.855 E0.01681 ; infill
G1 X153.078 Y142.715 E0.03825 ; infill
G1 X153.613 Y142.715 E0.01681 ; infill
G1 X152.753 Y141.855 E0.03825 ; infill
G1 X153.288 Y141.855 E0.01681 ; infill
G1 X154.148 Y142.715 E0.03825 ; infill
G1 X154.683 Y142.715 E0.01681 ; infill
G1 X153.822 Y141.855 E0.03825 ; infill
G1 X154.357 Y141.855 E0.01681 ; infill
G1 X155.217 Y142.715 E0.03825 ; infill
G1 X155.752 Y142.715 E0.01681 ; infill
G1 X154.892 Y141.855 E0.03825 ; infill
G1 X155.426 Y141.855 E0.01681 ; infill
G1 X156.287 Y142.715 E0.03825 ; infill
G1 X156.821 Y142.715 E0.01681 ; infill
G1 X155.961 Y141.855 E0.03825 ; infill
G1 X156.496 Y141.855 E0.01681 ; infill
G1 X157.356 Y142.715 E0.03825 ; infill
G1 X157.891 Y142.715 E0.01681 ; infill
G1 X157.031 Y141.855 E0.03825 ; infill
G1 X157.565 Y141.855 E0.01681 ; infill
G1 X158.426 Y142.715 E0.03825 ; infill
G1 X158.960 Y142.715 E0.01681 ; infill
G1 X158.100 Y141.855 E0.03825 ; infill
G1 X158.635 Y141.855 E0.01681 ; infill
G1 X159.495 Y142.715 E0.03825 ; infill
G1 X160.030 Y142.715 E0.01681 ; infill
G1 X159.170 Y141.855 E0.03825 ; infill
G1 X159.704 Y141.855 E0.01681 ; infill
G1 X160.565 Y142.715 E0.03825 ; infill
G1 X161.099 Y142.715 E0.01681 ; infill
G1 X160.239 Y141.855 E0.03825 ; infill
G1 X160.774 Y141.855 E0.01681 ; infill
G1 X161.634 Y142.715 E0.03825 ; infill
G1 X162.169 Y142.715 E0.01681 ; infill
G1 X161.308 Y141.855 E0.03825 ; infill
G1 X161.843 Y141.855 E0.01681 ; infill
G1 X162.703 Y142.715 E0.03825 ; infill
G1 X163.238 Y142.715 E0.01681 ; infill
G1 X162.378 Y141.855 E0.03825 ; infill
G1 X162.913 Y141.855 E0.01681 ; infill
G1 X163.773 Y142.715 E0.03825 ; infill
G1 X164.308 Y142.715 E0.01681 ; infill
G1 X163.447 Y141.855 E0.03825 ; infill
G1 X163.982 Y141.855 E0.01681 ; infill
G1 X164.842 Y142.715 E0.03825 ; infill
G1 X165.377 Y142.715 E0.01681 ; infill
G1 X164.517 Y141.855 E0.03825 ; infill
G1 X165.052 Y141.855 E0.01681 ; infill
G1 X165.912 Y142.715 E0.03825 ; infill
G1 X166.447 Y142.715 E0.01681 ; infill
G1 X165.586 Y141.855 E0.03825 ; infill
G1 X166.121 Y141.855 E0.01681 ; infill
G1 X166.981 Y142.715 E0.03825 ; infill
G1 X167.516 Y142.715 E0.01681 ; infill
G1 X166.656 Y141.855 E0.03825 ; infill
G1 X167.190 Y141.855 E0.01681 ; infill
G1 X168.051 Y142.715 E0.03825 ; infill
G1 X168.585 Y142.715 E0.01681 ; infill
G1 X167.725 Y141.855 E0.03825 ; infill
G1 X168.260 Y141.855 E0.01681 ; infill
G1 X169.120 Y142.715 E0.03825 ; infill
G1 X169.655 Y142.715 E0.01681 ; infill
G1 X168.795 Y141.855 E0.03825 ; infill
G1 X169.329 Y141.855 E0.01681 ; infill
G1 X170.190 Y142.715 E0.03825 ; infill
G1 X170.724 Y142.715 E0.01681 ; infill
G1 X169.864 Y141.855 E0.03825 ; infill
G1 X170.399 Y141.855 E0.01681 ; infill
G1 X171.259 Y142.715 E0.03825 ; infill
G1 X171.285 Y142.715 E0.00080 ; infill
G1 X171.757 Y142.678 E0.01489 ; infill
G1 X170.934 Y141.855 E0.03660 ; infill
G1 X171.452 Y141.839 E0.01632 ; infill
G1 X172.232 Y142.619 E0.03467 ; infill
G1 X172.663 Y142.516 E0.01394 ; infill
G1 X171.948 Y141.800 E0.03180 ; infill
G1 X172.381 Y141.699 E0.01399 ; infill
G1 X173.064 Y142.382 E0.03038 ; infill
G1 X173.443 Y142.225 E0.01287 ; infill
G1 X172.784 Y141.567 E0.02928 ; infill
G1 X173.162 Y141.410 E0.01287 ; infill
G1 X173.789 Y142.037 E0.02787 ; infill
G1 X174.120 Y141.834 E0.01223 ; infill
G1 X173.495 Y141.208 E0.02782 ; infill
G1 X173.715 Y141.073 E0.00813 ; infill
G1 X173.812 Y140.990 E0.00400 ; infill
G1 X174.422 Y141.601 E0.02713 ; infill
G1 X174.711 Y141.354 E0.01192 ; infill
G1 X174.100 Y140.744 E0.02713 ; infill
G1 X174.200 Y140.659 E0.00413 ; infill
G1 X174.361 Y140.470 E0.00780 ; infill
G1 X174.971 Y141.080 E0.02713 ; infill
G1 X175.218 Y140.792 E0.01192 ; infill
G1 X174.608 Y140.182 E0.02713 ; infill
G1 X174.812 Y139.852 E0.01221 ; infill
G1 X175.438 Y140.477 E0.02782 ; infill
G1 X175.641 Y140.146 E0.01223 ; infill
G1 X175.000 Y139.504 E0.02850 ; infill
G1 X175.156 Y139.126 E0.01287 ; infill
G1 X175.815 Y139.785 E0.02928 ; infill
G1 X175.971 Y139.407 E0.01287 ; infill
G1 X175.272 Y138.707 E0.03110 ; infill
G1 X175.340 Y138.421 E0.00925 ; infill
G1 X175.354 Y138.254 E0.00526 ; infill
G1 X176.089 Y138.989 E0.03269 ; infill
G1 X176.192 Y138.558 E0.01394 ; infill
G1 X175.393 Y137.758 E0.03556 ; infill
G1 X175.396 Y137.228 E0.01669 ; infill
G1 X176.232 Y138.063 E0.03713 ; infill
G1 X176.257 Y137.743 E0.01007 ; infill
G1 X176.257 Y137.553 E0.00598 ; infill
G1 X175.396 Y136.693 E0.03825 ; infill
G1 X175.396 Y136.158 E0.01681 ; infill
G1 X176.257 Y137.018 E0.03825 ; infill
G1 X176.257 Y136.484 E0.01681 ; infill
G1 X175.396 Y135.623 E0.03825 ; infill
G1 X175.396 Y135.089 E0.01681 ; infill
G1 X176.257 Y135.949 E0.03825 ; infill
G1 X176.257 Y135.414 E0.01681 ; infill
G1 X175.396 Y134.554 E0.03825 ; infill
G1 X175.396 Y134.019 E0.01681 ; infill
G1 X176.257 Y134.880 E0.03825 ; infill
G1 X176.257 Y134.345 E0.01681 ; infill
G1 X175.396 Y133.485 E0.03825 ; infill
G1 X175.396 Y132.950 E0.01681 ; infill
G1 X176.257 Y133.810 E0.03825 ; infill
G1 X176.257 Y133.275 E0.01681 ; infill
G1 X175.396 Y132.415 E0.03825 ; infill
G1 X175.396 Y131.880 E0.01681 ; infill
G1 X176.257 Y132.741 E0.03825 ; infill
G1 X176.257 Y132.206 E0.01681 ; infill
G1 X175.396 Y131.346 E0.03825 ; infill
G1 X175.396 Y130.811 E0.01681 ; infill
G1 X176.257 Y131.671 E0.03825 ; infill
G1 X176.257 Y131.136 E0.01681 ; infill
G1 X175.396 Y130.276 E0.03825 ; infill
G1 X175.396 Y129.741 E0.01681 ; infill
G1 X176.257 Y130.602 E0.03825 ; infill
G1 X176.257 Y130.067 E0.01681 ; infill
G1 X175.396 Y129.207 E0.03825 ; infill
G1 X175.396 Y128.672 E0.01681 ; infill
G1 X176.257 Y129.532 E0.03825 ; infill
G1 X176.257 Y128.997 E0.01681 ; infill
G1 X175.396 Y128.137 E0.03825 ; infill
G1 X175.396 Y127.602 E0.01681 ; infill
G1 X176.257 Y128.463 E0.03825 ; infill
G1 X176.257 Y127.928 E0.01681 ; infill
G1 X175.396 Y127.068 E0.03825 ; infill
G1 X175.396 Y126.533 E0.01681 ; infill
G1 X176.257 Y127.393 E0.03825 ; infill
G1 X176.257 Y126.859 E0.01681 ; infill
G1 X175.396 Y125.998 E0.03825 ; infill
G1 X175.396 Y125.464 E0.01681 ; infill
G1 X176.257 Y126.324 E0.03825 ; infill
G1 X176.257 Y125.789 E0.01681 ; infill
G1 X175.396 Y124.929 E0.03825 ; infill
G1 X175.396 Y124.394 E0.01681 ; infill
G1 X176.257 Y125.254 E0.03825 ; infill
G1 X176.257 Y124.720 E0.01681 ; infill
G1 X175.396 Y123.859 E0.03825 ; infill
G1 X175.396 Y123.325 E0.01681 ; infill
G1 X176.257 Y124.185 E0.03825 ; infill
G1 X176.257 Y123.650 E0.01681 ; infill
G1 X175.396 Y122.790 E0.03825 ; infill
G1 X175.396 Y122.255 E0.01681 ; infill
G1 X176.257 Y123.115 E0.03825 ; infill
G1 X176.257 Y122.581 E0.01681 ; infill
G1 X175.396 Y121.720 E0.03825 ; infill
G1 X175.396 Y121.186 E0.01681 ; infill
G1 X176.257 Y122.046 E0.03825 ; infill
G1 X176.257 Y121.511 E0.01681 ; infill
G1 X175.396 Y120.651 E0.03825 ; infill
G1 X175.396 Y120.116 E0.01681 ; infill
G1 X176.257 Y120.977 E0.03825 ; infill
G1 X176.257 Y120.442 E0.01681 ; infill
G1 X175.396 Y119.582 E0.03825 ; infill
G1 X175.396 Y119.047 E0.01681 ; infill
G1 X176.257 Y119.907 E0.03825 ; infill
G1 X176.257 Y119.372 E0.01681 ; infill
G1 X175.396 Y118.512 E0.03825 ; infill
G1 X175.396 Y117.977 E0.01681 ; infill
G1 X176.257 Y118.838 E0.03825 ; infill
G1 X176.257 Y118.303 E0.01681 ; infill
G1 X175.396 Y117.443 E0.03825 ; infill
G1 X175.396 Y116.908 E0.01681 ; infill
G1 X176.257 Y117.768 E0.03825 ; infill
G1 X176.257 Y117.233 E0.01681 ; infill
G1 X175.396 Y116.373 E0.03825 ; infill
G1 X175.396 Y115.838 E0.01681 ; infill
G1 X176.257 Y116.699 E0.03825 ; infill
G1 X176.257 Y116.164 E0.01681 ; infill
G1 X175.396 Y115.304 E0.03825 ; infill
G1 X175.396 Y114.769 E0.01681 ; infill
G1 X176.257 Y115.629 E0.03825 ; infill
G1 X176.257 Y115.095 E0.01681 ; infill
G1 X175.396 Y114.234 E0.03825 ; infill
G1 X175.396 Y113.700 E0.01681 ; infill
G1 X176.257 Y114.560 E0.03825 ; infill
G1 X176.257 Y114.025 E0.01681 ; infill
G1 X175.396 Y113.165 E0.03825 ; infill
G1 X175.396 Y112.630 E0.01681 ; infill
G1 X176.257 Y113.490 E0.03825 ; infill
G1 X176.257 Y112.956 E0.01681 ; infill
G1 X175.396 Y112.095 E0.03825 ; infill
G1 X175.396 Y111.561 E0.01681 ; infill
G1 X176.257 Y112.421 E0.03825 ; infill
G1 X176.257 Y111.886 E0.01681 ; infill
G1 X175.396 Y111.026 E0.03825 ; infill
G1 X175.396 Y110.491 E0.01681 ; infill
G1 X176.257 Y111.351 E0.03825 ; infill
G1 X176.257 Y110.817 E0.01681 ; infill
G1 X175.396 Y109.956 E0.03825 ; infill
G1 X175.396 Y109.422 E0.01681 ; infill
G1 X176.257 Y110.282 E0.03825 ; infill
G1 X176.257 Y109.747 E0.01681 ; infill
G1 X175.396 Y108.887 E0.03825 ; infill
G1 X175.396 Y108.352 E0.01681 ; infill
G1 X176.257 Y109.212 E0.03825 ; infill
G1 X176.257 Y108.678 E0.01681 ; infill
G1 X175.396 Y107.817 E0.03825 ; infill
G1 X175.396 Y107.283 E0.01681 ; infill
G1 X176.257 Y108.143 E0.03825 ; infill
G1 X176.257 Y107.608 E0.01681 ; infill
G1 X175.396 Y106.748 E0.03825 ; infill
G1 X175.396 Y106.213 E0.01681 ; infill
G1 X176.257 Y107.074 E0.03825 ; infill
G1 X176.257 Y106.539 E0.01681 ; infill
G1 X175.396 Y105.679 E0.03825 ; infill
G1 X175.396 Y105.144 E0.01681 ; infill
G1 X176.257 Y106.004 E0.03825 ; infill
G1 X176.257 Y105.469 E0.01681 ; infill
G1 X175.396 Y104.609 E0.03825 ; infill
G1 X175.396 Y104.074 E0.01681 ; infill
G1 X176.257 Y104.935 E0.03825 ; infill
G1 X176.257 Y104.400 E0.01681 ; infill
G1 X175.396 Y103.540 E0.03825 ; infill
G1 X175.396 Y103.005 E0.01681 ; infill
G1 X176.257 Y103.865 E0.03825 ; infill
G1 X176.257 Y103.330 E0.01681 ; infill
G1 X175.396 Y102.470 E0.03825 ; infill
G1 X175.396 Y101.935 E0.01681 ; infill
G1 X176.257 Y102.796 E0.03825 ; infill
G1 X176.257 Y102.261 E0.01681 ; infill
G1 X175.396 Y101.401 E0.03825 ; infill
G1 X175.396 Y100.866 E0.01681 ; infill
G1 X176.257 Y101.726 E0.03825 ; infill
G1 X176.257 Y101.192 E0.01681 ; infill
G1 X175.396 Y100.331 E0.03825 ; infill
G1 X175.396 Y99.797 E0.01681 ; infill
G1 X176.257 Y100.657 E0.03825 ; infill
G1 X176.257 Y100.122 E0.01681 ; infill
G1 X175.396 Y99.262 E0.03825 ; infill
G1 X175.396 Y98.727 E0.01681 ; infill
G1 X176.257 Y99.587 E0.03825 ; infill
G1 X176.257 Y99.053 E0.01681 ; infill
G1 X175.396 Y98.192 E0.03825 ; infill
G1 X175.396 Y97.658 E0.01681 ; infill
G1 X176.257 Y98.518 E0.03825 ; infill
G1 X176.257 Y97.983 E0.01681 ; infill
G1 X175.396 Y97.123 E0.03825 ; infill
G1 X175.396 Y96.588 E0.01681 ; infill
G1 X176.257 Y97.448 E0.03825 ; infill
G1 X176.257 Y96.914 E0.01681 ; infill
G1 X175.396 Y96.053 E0.03825 ; infill
G1 X175.396 Y95.519 E0.01681 ; infill
G1 X176.257 Y96.379 E0.03825 ; infill
G1 X176.257 Y95.844 E0.01681 ; infill
G1 X175.396 Y94.984 E0.03825 ; infill
G1 X175.396 Y94.449 E0.01681 ; infill
G1 X176.257 Y95.310 E0.03825 ; infill
G1 X176.257 Y94.775 E0.01681 ; infill
G1 X175.396 Y93.915 E0.03825 ; infill
G1 X175.396 Y93.380 E0.01681 ; infill
G1 X176.257 Y94.240 E0.03825 ; infill
G1 X176.257 Y93.705 E0.01681 ; infill
G1 X175.396 Y92.845 E0.03825 ; infill
G1 X175.396 Y92.310 E0.01681 ; infill
G1 X176.257 Y93.171 E0.03825 ; infill
G1 X176.257 Y92.636 E0.01681 ; infill
G1 X175.396 Y91.776 E0.03825 ; infill
G1 X175.396 Y91.241 E0.01681 ; infill
G1 X176.257 Y92.101 E0.03825 ; infill
G1 X176.257 Y91.566 E0.01681 ; infill
G1 X175.396 Y90.706 E0.03825 ; infill
G1 X175.396 Y90.171 E0.01681 ; infill
G1 X176.257 Y91.032 E0.03825 ; infill
G1 X176.257 Y90.497 E0.01681 ; infill
G1 X175.396 Y89.637 E0.03825 ; infill
G1 X175.396 Y89.102 E0.01681 ; infill
G1 X176.257 Y89.962 E0.03825 ; infill
G1 X176.257 Y89.427 E0.01681 ; infill
G1 X175.396 Y88.567 E0.03825 ; infill
G1 X175.396 Y88.032 E0.01681 ; infill
G1 X176.257 Y88.893 E0.03825 ; infill
G1 X176.257 Y88.358 E0.01681 ; infill
G1 X175.396 Y87.498 E0.03825 ; infill
G1 X175.396 Y86.963 E0.01681 ; infill
G1 X176.257 Y87.823 E0.03825 ; infill
G1 X176.257 Y87.289 E0.01681 ; infill
G1 X175.396 Y86.428 E0.03825 ; infill
G1 X175.396 Y85.894 E0.01681 ; infill
G1 X176.257 Y86.754 E0.03825 ; infill
G1 X176.257 Y86.219 E0.01681 ; infill
G1 X174.299 Y84.262 E0.08703 ; infill
G1 X174.677 Y84.105 E0.01287 ; infill
G1 X176.257 Y85.684 E0.07022 ; infill
G1 X176.257 Y85.150 E0.01681 ; infill
G1 X175.056 Y83.949 E0.05341 ; infill
G1 X175.396 Y83.807 E0.01160 ; infill
G1 X175.396 Y83.755 E0.00166 ; infill
G1 X176.257 Y84.615 E0.03825 ; infill
G1 X176.257 Y84.080 E0.01681 ; infill
G1 X175.396 Y83.220 E0.03825 ; infill
G1 X175.396 Y82.685 E0.01681 ; infill
G1 X176.257 Y83.545 E0.03825 ; infill
G1 X176.257 Y83.011 E0.01681 ; infill
G1 X175.396 Y82.150 E0.03825 ; infill
G1 X175.396 Y81.616 E0.01681 ; infill
G1 X176.257 Y82.476 E0.03825 ; infill
G1 X176.257 Y81.941 E0.01681 ; infill
G1 X175.396 Y81.081 E0.03825 ; infill
G1 X175.396 Y80.546 E0.01681 ; infill
G1 X176.257 Y81.407 E0.03825 ; infill
G1 X176.257 Y80.872 E0.01681 ; infill
G1 X175.396 Y80.012 E0.03825 ; infill
G1 X175.396 Y79.477 E0.01681 ; infill
G1 X176.257 Y80.337 E0.03825 ; infill
G1 X176.257 Y79.802 E0.01681 ; infill
G1 X175.396 Y78.942 E0.03825 ; infill
G1 X175.396 Y78.407 E0.01681 ; infill
G1 X176.257 Y79.268 E0.03825 ; infill
G1 X176.257 Y78.733 E0.01681 ; infill
G1 X175.396 Y77.873 E0.03825 ; infill
G1 X175.396 Y77.338 E0.01681 ; infill
G1 X176.257 Y78.198 E0.03825 ; infill
G1 X176.257 Y77.663 E0.01681 ; infill
G1 X175.396 Y76.803 E0.03825 ; infill
G1 X175.396 Y76.268 E0.01681 ; infill
G1 X176.257 Y77.129 E0.03825 ; infill
G1 X176.257 Y76.594 E0.01681 ; infill
G1 X175.396 Y75.734 E0.03825 ; infill
G1 X175.396 Y75.199 E0.01681 ; infill
G1 X176.257 Y76.059 E0.03825 ; infill
G1 X176.257 Y75.525 E0.01681 ; infill
G1 X175.396 Y74.664 E0.03825 ; infill
G1 X175.396 Y74.130 E0.01681 ; infill
G1 X176.257 Y74.990 E0.03825 ; infill
G1 X176.257 Y74.455 E0.01681 ; infill
G1 X175.396 Y73.595 E0.03825 ; infill
G1 X175.396 Y73.060 E0.01681 ; infill
G1 X176.257 Y73.920 E0.03825 ; infill
G1 X176.257 Y73.386 E0.01681 ; infill
G1 X175.396 Y72.525 E0.03825 ; infill
G1 X175.371 Y71.965 E0.01764 ; infill
G1 X176.257 Y72.851 E0.03939 ; infill
G1 X176.257 Y72.316 E0.01681 ; infill
G1 X175.284 Y71.343 E0.04326 ; infill
G1 X175.192 Y70.959 E0.01243 ; infill
G1 X175.020 Y70.545 E0.01409 ; infill
G1 X176.216 Y71.741 E0.05318 ; infill
G1 X176.193 Y71.444 E0.00936 ; infill
G1 X176.110 Y71.100 E0.01112 ; infill
G1 X172.441 Y67.431 E0.16314 ; infill
G1 X172.849 Y67.529 E0.01319 ; infill
G1 X173.233 Y67.688 E0.01305 ; infill
G1 X176.167 Y70.622 E0.13047 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X173.233 Y67.688 E-1.09505 ; wipe and retract
G1 X172.849 Y67.529 E-0.10957 ; wipe and retract
G1 X172.441 Y67.431 E-0.11072 ; wipe and retract
G1 X175.026 Y70.016 E-0.96466 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X173.949 Y84.131 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X171.359 Y81.539 E0.01923 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X173.949 Y84.131 E-0.96683 ; wipe and retract
G1 E-1.43317 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X169.806 Y79.683 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X169.606 Y79.483 E0.00912 ; infill
G1 X169.228 Y79.654 E0.01336 ; infill
G1 X169.435 Y79.860 E0.00941 ; infill
G1 X169.139 Y80.113 E0.01255 ; infill
G1 X168.849 Y79.823 E0.01323 ; infill
G1 X168.470 Y79.992 E0.01340 ; infill
G1 X168.844 Y80.366 E0.01706 ; infill
G1 X168.529 Y80.600 E0.01264 ; infill
G1 X168.146 Y80.217 E0.01749 ; infill
G1 X167.829 Y80.449 E0.01266 ; infill
G1 X168.211 Y80.830 E0.01741 ; infill
G1 X167.892 Y81.060 E0.01267 ; infill
G1 X167.513 Y80.680 E0.01733 ; infill
G1 X167.196 Y80.912 E0.01266 ; infill
G1 X167.696 Y81.412 E0.02279 ; infill
G1 X166.735 Y81.572 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X164.660 Y83.091 E0.04400 ; infill
G1 X164.319 Y83.418 E0.00808 ; infill
G1 X164.143 Y83.619 E0.00430 ; infill
G1 X163.885 Y84.032 E0.00784 ; infill
G1 X163.715 Y84.419 E0.00680 ; infill
G1 X163.621 Y84.709 E0.00490 ; infill
G1 X163.571 Y84.947 E0.00392 ; infill
G1 X163.531 Y85.435 E0.00787 ; infill
G1 X163.530 Y87.852 E0.03890 ; infill
G1 X163.498 Y88.686 E0.01343 ; infill
G1 X163.463 Y89.311 E0.01575 ; infill
G1 X163.498 Y89.951 E0.01611 ; infill
G1 X163.516 Y90.270 E0.00709 ; infill
G1 X163.526 Y90.798 E0.01014 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X163.516 Y90.270 E-0.13941 ; wipe and retract
G1 E-2.26059 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X161.380 Y89.315 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X160.354 Y89.315 E0.00485 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X161.380 Y89.315 E-0.27053 ; wipe and retract
G1 E-2.12947 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X174.102 Y98.192 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X170.529 Y98.192 E0.01876 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X174.102 Y98.192 E-0.94290 ; wipe and retract
G1 E-1.45710 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.294 Y98.303 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X168.293 Y98.066 E0.00120 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X168.294 Y98.303 E-0.06248 ; wipe and retract
G1 E-2.33752 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X168.168 Y107.342 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X168.168 Y107.114 E0.00114 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X168.168 Y107.342 E-0.06004 ; wipe and retract
G1 E-2.33996 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X163.204 Y107.116 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X163.204 Y107.340 E0.00111 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X163.204 Y107.116 E-0.05887 ; wipe and retract
G1 E-2.34113 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X129.959 Y129.783 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X130.052 Y130.006 E0.00757 ; perimeter
G1 X130.052 Y130.247 E0.00757 ; perimeter
G1 X129.959 Y130.470 E0.00757 ; perimeter
G1 X129.788 Y130.641 E0.00757 ; perimeter
G1 X129.565 Y130.733 E0.00758 ; perimeter
G1 X129.323 Y130.733 E0.00758 ; perimeter
G1 X129.100 Y130.641 E0.00758 ; perimeter
G1 X128.929 Y130.470 E0.00757 ; perimeter
G1 X128.837 Y130.247 E0.00757 ; perimeter
G1 X128.837 Y130.006 E0.00757 ; perimeter
G1 X128.929 Y129.783 E0.00757 ; perimeter
G1 X129.100 Y129.612 E0.00757 ; perimeter
G1 X129.323 Y129.519 E0.00758 ; perimeter
G1 X129.547 Y129.518 E0.00702 ; perimeter
G1 X129.686 Y129.557 E0.00452 ; perimeter
G1 X129.788 Y129.612 E0.00365 ; perimeter
G1 X129.921 Y129.736 E0.00570 ; perimeter
G1 X130.274 Y129.572 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X130.367 Y129.745 E0.00613 ; perimeter
G1 X130.423 Y129.932 E0.00613 ; perimeter
G1 X130.442 Y130.126 E0.00613 ; perimeter
G1 X130.423 Y130.321 E0.00613 ; perimeter
G1 X130.367 Y130.508 E0.00613 ; perimeter
G1 X130.274 Y130.680 E0.00613 ; perimeter
G1 X130.150 Y130.832 E0.00613 ; perimeter
G1 X129.999 Y130.956 E0.00613 ; perimeter
G1 X129.826 Y131.048 E0.00614 ; perimeter
G1 X129.639 Y131.105 E0.00614 ; perimeter
G1 X129.444 Y131.124 E0.00614 ; perimeter
G1 X129.250 Y131.105 E0.00614 ; perimeter
G1 X129.062 Y131.048 E0.00614 ; perimeter
G1 X128.890 Y130.956 E0.00614 ; perimeter
G1 X128.738 Y130.832 E0.00613 ; perimeter
G1 X128.614 Y130.680 E0.00613 ; perimeter
G1 X128.522 Y130.508 E0.00613 ; perimeter
G1 X128.465 Y130.321 E0.00613 ; perimeter
G1 X128.446 Y130.126 E0.00613 ; perimeter
G1 X128.465 Y129.932 E0.00613 ; perimeter
G1 X128.522 Y129.745 E0.00613 ; perimeter
G1 X128.614 Y129.572 E0.00613 ; perimeter
G1 X128.738 Y129.421 E0.00613 ; perimeter
G1 X128.890 Y129.297 E0.00613 ; perimeter
G1 X129.062 Y129.205 E0.00614 ; perimeter
G1 X129.250 Y129.148 E0.00614 ; perimeter
G1 X129.444 Y129.129 E0.00614 ; perimeter
G1 X129.618 Y129.146 E0.00547 ; perimeter
G1 X129.828 Y129.205 E0.00685 ; perimeter
G1 X129.999 Y129.297 E0.00608 ; perimeter
G1 X130.150 Y129.421 E0.00613 ; perimeter
G1 X130.236 Y129.526 E0.00425 ; perimeter
G1 X130.188 Y129.748 F10800.000 ; move inwards before travel
G1 X129.656 Y130.573 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X129.127 Y130.044 E0.02816 ; infill
G1 X129.169 Y129.943 E0.00411 ; infill
G1 X129.260 Y129.852 E0.00485 ; infill
G1 X129.381 Y129.802 E0.00491 ; infill
G1 X129.530 Y129.807 E0.00562 ; infill
G1 X129.939 Y130.215 E0.02174 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X129.530 Y129.807 E-0.15245 ; wipe and retract
G1 X129.381 Y129.802 E-0.03944 ; wipe and retract
G1 X129.260 Y129.852 E-0.03441 ; wipe and retract
G1 X129.169 Y129.943 E-0.03405 ; wipe and retract
G1 X129.127 Y130.044 E-0.02883 ; wipe and retract
G1 X129.656 Y130.573 E-0.19749 ; wipe and retract
G1 E-1.91334 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X71.026 Y104.478 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X70.805 Y104.774 E0.01157 ; perimeter
G1 X70.585 Y104.478 E0.01157 ; perimeter
G1 X70.585 Y102.667 E0.05679 ; perimeter
G1 X70.805 Y102.371 E0.01157 ; perimeter
G1 X71.026 Y102.667 E0.01157 ; perimeter
G1 X71.026 Y104.418 E0.05491 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.805 Y104.774 E-0.11046 ; wipe and retract
G1 X70.585 Y104.478 E-0.09737 ; wipe and retract
G1 X70.585 Y102.667 E-0.47794 ; wipe and retract
G1 X70.805 Y102.371 E-0.09737 ; wipe and retract
G1 X71.026 Y102.667 E-0.09737 ; wipe and retract
G1 X71.026 Y104.418 E-0.46211 ; wipe and retract
G1 E-1.05738 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X67.420 Y98.343 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X66.852 Y98.348 E0.01780 ; perimeter
G1 X67.172 Y98.093 E0.01280 ; perimeter
G1 X67.423 Y97.778 E0.01264 ; perimeter
G1 X67.421 Y98.283 E0.01585 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X66.852 Y98.348 E-0.15086 ; wipe and retract
G1 X67.172 Y98.093 E-0.10771 ; wipe and retract
G1 X67.423 Y97.778 E-0.10642 ; wipe and retract
G1 X67.421 Y98.283 E-0.13339 ; wipe and retract
G1 E-1.90161 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X74.190 Y98.251 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X74.188 Y97.778 E0.01483 ; perimeter
G1 X74.439 Y98.093 E0.01265 ; perimeter
G1 X74.759 Y98.348 E0.01280 ; perimeter
G1 X74.191 Y98.343 E0.01780 ; perimeter
G1 X74.191 Y98.311 E0.00102 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.188 Y97.778 E-0.14062 ; wipe and retract
G1 X74.439 Y98.093 E-0.10644 ; wipe and retract
G1 X74.759 Y98.348 E-0.10771 ; wipe and retract
G1 X74.191 Y98.343 E-0.14985 ; wipe and retract
G1 X74.191 Y98.311 E-0.00862 ; wipe and retract
G1 E-1.88676 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X73.125 Y93.906 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X74.757 Y93.896 E0.05117 ; perimeter
G1 X74.439 Y94.149 E0.01273 ; perimeter
G1 X74.194 Y94.457 E0.01235 ; perimeter
G1 X74.197 Y94.392 E0.00205 ; perimeter
G1 X73.019 Y94.346 E0.03697 ; perimeter
G1 X71.019 Y94.336 E0.06271 ; perimeter
G1 X71.019 Y100.449 E0.19166 ; perimeter
G1 X70.805 Y100.474 E0.00675 ; perimeter
G1 X70.592 Y100.449 E0.00675 ; perimeter
G1 X70.592 Y94.336 E0.19166 ; perimeter
G1 X68.592 Y94.346 E0.06271 ; perimeter
G1 X67.413 Y94.392 E0.03697 ; perimeter
G1 X67.417 Y94.457 E0.00204 ; perimeter
G1 X67.172 Y94.149 E0.01235 ; perimeter
G1 X66.854 Y93.896 E0.01273 ; perimeter
G1 X68.486 Y93.906 E0.05117 ; perimeter
G1 X69.835 Y91.223 E0.09414 ; perimeter
G1 X70.805 Y91.119 E0.03061 ; perimeter
G1 X71.776 Y91.223 E0.03061 ; perimeter
G1 X73.098 Y93.852 E0.09226 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.757 Y93.896 E-0.43791 ; wipe and retract
G1 X74.439 Y94.149 E-0.10715 ; wipe and retract
G1 X74.194 Y94.457 E-0.10398 ; wipe and retract
G1 X74.197 Y94.392 E-0.01723 ; wipe and retract
G1 X73.019 Y94.346 E-0.31113 ; wipe and retract
G1 X71.019 Y94.336 E-0.52779 ; wipe and retract
G1 X71.019 Y97.272 E-0.77481 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X96.602 Y86.057 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X96.652 Y87.576 E0.04766 ; perimeter
G1 X96.765 Y88.261 E0.02176 ; perimeter
G1 X96.698 Y88.817 E0.01756 ; perimeter
G1 X96.211 Y88.817 E0.01527 ; perimeter
G1 X96.145 Y88.252 E0.01786 ; perimeter
G1 X96.257 Y87.602 E0.02069 ; perimeter
G1 X96.306 Y86.057 E0.04846 ; perimeter
G1 X95.523 Y85.879 E0.02516 ; perimeter
G1 X95.082 Y85.709 E0.01485 ; perimeter
G1 X94.670 Y85.476 E0.01481 ; perimeter
G1 X94.298 Y85.186 E0.01481 ; perimeter
G1 X93.972 Y84.844 E0.01481 ; perimeter
G1 X93.700 Y84.458 E0.01481 ; perimeter
G1 X93.487 Y84.036 E0.01481 ; perimeter
G1 X93.339 Y83.587 E0.01481 ; perimeter
G1 X93.258 Y83.122 E0.01481 ; perimeter
G1 X93.246 Y82.649 E0.01481 ; perimeter
G1 X93.304 Y82.181 E0.01481 ; perimeter
G1 X93.430 Y81.725 E0.01481 ; perimeter
G1 X93.619 Y81.299 E0.01463 ; perimeter
G1 X93.703 Y81.171 E0.00481 ; perimeter
G1 X94.013 Y81.480 E0.01372 ; perimeter
G1 X93.874 Y81.739 E0.00920 ; perimeter
G1 X93.716 Y82.262 E0.01716 ; perimeter
G1 X93.662 Y82.807 E0.01716 ; perimeter
G1 X93.716 Y83.351 E0.01715 ; perimeter
G1 X93.875 Y83.875 E0.01715 ; perimeter
G1 X94.133 Y84.357 E0.01715 ; perimeter
G1 X94.480 Y84.780 E0.01716 ; perimeter
G1 X94.904 Y85.127 E0.01716 ; perimeter
G1 X95.386 Y85.385 E0.01715 ; perimeter
G1 X95.919 Y85.546 E0.01746 ; perimeter
G1 X96.443 Y85.585 E0.01649 ; perimeter
G1 X96.994 Y85.555 E0.01731 ; perimeter
G1 X97.528 Y85.381 E0.01758 ; perimeter
G1 X98.005 Y85.126 E0.01696 ; perimeter
G1 X98.427 Y84.779 E0.01715 ; perimeter
G1 X98.774 Y84.355 E0.01715 ; perimeter
G1 X99.032 Y83.873 E0.01716 ; perimeter
G1 X99.191 Y83.349 E0.01715 ; perimeter
G1 X99.244 Y82.805 E0.01715 ; perimeter
G1 X99.190 Y82.260 E0.01715 ; perimeter
G1 X99.031 Y81.737 E0.01715 ; perimeter
G1 X98.893 Y81.478 E0.00921 ; perimeter
G1 X99.202 Y81.168 E0.01372 ; perimeter
G1 X99.287 Y81.296 E0.00481 ; perimeter
G1 X99.476 Y81.723 E0.01463 ; perimeter
G1 X99.602 Y82.178 E0.01481 ; perimeter
G1 X99.660 Y82.646 E0.01479 ; perimeter
G1 X99.647 Y83.126 E0.01504 ; perimeter
G1 X99.568 Y83.585 E0.01460 ; perimeter
G1 X99.420 Y84.033 E0.01481 ; perimeter
G1 X99.208 Y84.455 E0.01481 ; perimeter
G1 X98.936 Y84.842 E0.01481 ; perimeter
G1 X98.610 Y85.184 E0.01481 ; perimeter
G1 X98.238 Y85.475 E0.01481 ; perimeter
G1 X97.827 Y85.708 E0.01481 ; perimeter
G1 X97.385 Y85.879 E0.01485 ; perimeter
G1 X96.660 Y86.044 E0.02331 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X96.652 Y87.576 E-0.40444 ; wipe and retract
G1 X96.765 Y88.261 E-0.18313 ; wipe and retract
G1 X96.698 Y88.817 E-0.14781 ; wipe and retract
G1 X96.211 Y88.817 E-0.12853 ; wipe and retract
G1 X96.145 Y88.252 E-0.15033 ; wipe and retract
G1 X96.257 Y87.602 E-0.17412 ; wipe and retract
G1 X96.306 Y86.057 E-0.40786 ; wipe and retract
G1 X95.523 Y85.879 E-0.21173 ; wipe and retract
G1 X95.082 Y85.709 E-0.12495 ; wipe and retract
G1 X94.670 Y85.476 E-0.12468 ; wipe and retract
G1 X94.298 Y85.186 E-0.12466 ; wipe and retract
G1 X94.042 Y84.917 E-0.09776 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X74.774 Y81.830 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X74.730 Y82.395 E0.01775 ; perimeter
G1 X74.638 Y82.857 E0.01479 ; perimeter
G1 X74.471 Y83.349 E0.01627 ; perimeter
G1 X74.242 Y83.814 E0.01627 ; perimeter
G1 X73.954 Y84.246 E0.01627 ; perimeter
G1 X73.611 Y84.636 E0.01627 ; perimeter
G1 X73.221 Y84.978 E0.01627 ; perimeter
G1 X72.790 Y85.267 E0.01627 ; perimeter
G1 X72.324 Y85.496 E0.01627 ; perimeter
G1 X71.832 Y85.663 E0.01627 ; perimeter
G1 X71.323 Y85.764 E0.01627 ; perimeter
G1 X70.805 Y85.798 E0.01628 ; perimeter
G1 X70.288 Y85.764 E0.01627 ; perimeter
G1 X69.779 Y85.663 E0.01627 ; perimeter
G1 X69.284 Y85.495 E0.01638 ; perimeter
G1 X68.782 Y85.240 E0.01764 ; perimeter
G1 X68.390 Y84.978 E0.01479 ; perimeter
G1 X68.000 Y84.636 E0.01627 ; perimeter
G1 X67.657 Y84.246 E0.01627 ; perimeter
G1 X67.369 Y83.814 E0.01627 ; perimeter
G1 X67.140 Y83.349 E0.01627 ; perimeter
G1 X66.973 Y82.857 E0.01627 ; perimeter
G1 X66.871 Y82.348 E0.01627 ; perimeter
G1 X66.837 Y81.827 E0.01638 ; perimeter
G1 X66.881 Y81.266 E0.01764 ; perimeter
G1 X66.973 Y80.803 E0.01478 ; perimeter
G1 X67.141 Y80.309 E0.01638 ; perimeter
G1 X67.395 Y79.807 E0.01764 ; perimeter
G1 X67.657 Y79.415 E0.01479 ; perimeter
G1 X68.000 Y79.025 E0.01627 ; perimeter
G1 X68.390 Y78.682 E0.01627 ; perimeter
G1 X68.821 Y78.394 E0.01627 ; perimeter
G1 X69.287 Y78.164 E0.01627 ; perimeter
G1 X69.778 Y77.998 E0.01627 ; perimeter
G1 X70.288 Y77.896 E0.01627 ; perimeter
G1 X70.758 Y77.865 E0.01479 ; perimeter
G1 X71.320 Y77.896 E0.01764 ; perimeter
G1 X71.832 Y77.998 E0.01638 ; perimeter
G1 X72.324 Y78.164 E0.01627 ; perimeter
G1 X72.790 Y78.394 E0.01627 ; perimeter
G1 X73.221 Y78.682 E0.01627 ; perimeter
G1 X73.611 Y79.025 E0.01627 ; perimeter
G1 X73.953 Y79.415 E0.01627 ; perimeter
G1 X74.242 Y79.846 E0.01627 ; perimeter
G1 X74.471 Y80.312 E0.01627 ; perimeter
G1 X74.638 Y80.803 E0.01627 ; perimeter
G1 X74.730 Y81.266 E0.01479 ; perimeter
G1 X74.769 Y81.771 E0.01587 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.730 Y82.395 E-0.16506 ; wipe and retract
G1 X74.638 Y82.857 E-0.12445 ; wipe and retract
G1 X74.471 Y83.349 E-0.13697 ; wipe and retract
G1 X74.242 Y83.814 E-0.13696 ; wipe and retract
G1 X73.954 Y84.246 E-0.13696 ; wipe and retract
G1 X73.611 Y84.636 E-0.13697 ; wipe and retract
G1 X73.221 Y84.978 E-0.13698 ; wipe and retract
G1 X72.790 Y85.267 E-0.13696 ; wipe and retract
G1 X72.324 Y85.496 E-0.13698 ; wipe and retract
G1 X71.832 Y85.663 E-0.13697 ; wipe and retract
G1 X71.323 Y85.764 E-0.13696 ; wipe and retract
G1 X70.805 Y85.798 E-0.13698 ; wipe and retract
G1 X70.288 Y85.764 E-0.13697 ; wipe and retract
G1 X69.779 Y85.663 E-0.13696 ; wipe and retract
G1 X69.284 Y85.495 E-0.13790 ; wipe and retract
G1 X68.782 Y85.240 E-0.14849 ; wipe and retract
G1 X68.591 Y85.113 E-0.06049 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.805 Y74.124 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X71.025 Y73.829 E0.01153 ; perimeter
G1 X71.016 Y71.428 E0.07530 ; perimeter
G1 X102.851 Y71.428 E0.99815 ; perimeter
G1 X103.529 Y71.481 E0.02133 ; perimeter
G1 X104.106 Y71.619 E0.01860 ; perimeter
G1 X104.654 Y71.846 E0.01860 ; perimeter
G1 X105.160 Y72.156 E0.01860 ; perimeter
G1 X105.611 Y72.542 E0.01860 ; perimeter
G1 X105.996 Y72.993 E0.01860 ; perimeter
G1 X106.306 Y73.498 E0.01860 ; perimeter
G1 X106.533 Y74.046 E0.01860 ; perimeter
G1 X106.671 Y74.623 E0.01860 ; perimeter
G1 X106.725 Y75.302 E0.02133 ; perimeter
G1 X106.725 Y88.099 E0.40126 ; perimeter
G1 X99.297 Y88.091 E0.23288 ; perimeter
G1 X99.002 Y88.311 E0.01156 ; perimeter
G1 X99.297 Y88.532 E0.01156 ; perimeter
G1 X106.725 Y88.524 E0.23288 ; perimeter
G1 X106.725 Y93.339 E0.15099 ; perimeter
G1 X99.497 Y93.331 E0.22661 ; perimeter
G1 X99.202 Y93.551 E0.01156 ; perimeter
G1 X99.497 Y93.772 E0.01156 ; perimeter
G1 X106.725 Y93.764 E0.22661 ; perimeter
G1 X106.724 Y111.288 E0.54946 ; perimeter
G1 X106.691 Y112.304 E0.03188 ; perimeter
G1 X106.586 Y113.252 E0.02990 ; perimeter
G1 X106.690 Y114.206 E0.03008 ; perimeter
G1 X106.719 Y114.737 E0.01668 ; perimeter
G1 X106.725 Y122.036 E0.22886 ; perimeter
G1 X103.395 Y122.027 E0.10442 ; perimeter
G1 X103.100 Y122.247 E0.01154 ; perimeter
G1 X103.395 Y122.468 E0.01154 ; perimeter
G1 X106.725 Y122.459 E0.10440 ; perimeter
G1 X106.725 Y134.698 E0.38376 ; perimeter
G1 X106.671 Y135.377 E0.02133 ; perimeter
G1 X106.533 Y135.954 E0.01860 ; perimeter
G1 X106.306 Y136.502 E0.01860 ; perimeter
G1 X105.996 Y137.007 E0.01860 ; perimeter
G1 X105.611 Y137.458 E0.01860 ; perimeter
G1 X105.160 Y137.844 E0.01860 ; perimeter
G1 X104.654 Y138.154 E0.01860 ; perimeter
G1 X104.106 Y138.381 E0.01860 ; perimeter
G1 X103.529 Y138.519 E0.01860 ; perimeter
G1 X102.851 Y138.572 E0.02133 ; perimeter
G1 X87.066 Y138.572 E0.49490 ; perimeter
G1 X87.075 Y134.319 E0.13337 ; perimeter
G1 X86.855 Y134.024 E0.01155 ; perimeter
G1 X86.634 Y134.319 E0.01155 ; perimeter
G1 X86.643 Y138.572 E0.13337 ; perimeter
G1 X71.018 Y138.572 E0.48992 ; perimeter
G1 X71.026 Y132.337 E0.19551 ; perimeter
G1 X70.805 Y132.041 E0.01156 ; perimeter
G1 X70.585 Y132.337 E0.01156 ; perimeter
G1 X70.593 Y138.572 E0.19551 ; perimeter
G1 X54.967 Y138.572 E0.48994 ; perimeter
G1 X54.976 Y135.848 E0.08541 ; perimeter
G1 X54.756 Y135.554 E0.01153 ; perimeter
G1 X54.536 Y135.848 E0.01153 ; perimeter
G1 X54.545 Y138.572 E0.08541 ; perimeter
G1 X38.760 Y138.572 E0.49493 ; perimeter
G1 X38.082 Y138.519 E0.02133 ; perimeter
G1 X37.505 Y138.381 E0.01860 ; perimeter
G1 X36.957 Y138.154 E0.01860 ; perimeter
G1 X36.451 Y137.844 E0.01860 ; perimeter
G1 X36.000 Y137.458 E0.01860 ; perimeter
G1 X35.615 Y137.007 E0.01860 ; perimeter
G1 X35.305 Y136.502 E0.01860 ; perimeter
G1 X35.078 Y135.953 E0.01860 ; perimeter
G1 X34.940 Y135.377 E0.01860 ; perimeter
G1 X34.886 Y134.698 E0.02133 ; perimeter
G1 X34.886 Y122.459 E0.38376 ; perimeter
G1 X38.216 Y122.468 E0.10440 ; perimeter
G1 X38.511 Y122.247 E0.01154 ; perimeter
G1 X38.216 Y122.027 E0.01154 ; perimeter
G1 X34.886 Y122.036 E0.10442 ; perimeter
G1 X34.892 Y114.737 E0.22886 ; perimeter
G1 X34.921 Y114.206 E0.01668 ; perimeter
G1 X35.025 Y113.252 E0.03008 ; perimeter
G1 X34.920 Y112.304 E0.02990 ; perimeter
G1 X34.887 Y111.288 E0.03188 ; perimeter
G1 X34.886 Y93.764 E0.54946 ; perimeter
G1 X42.114 Y93.772 E0.22661 ; perimeter
G1 X42.409 Y93.551 E0.01156 ; perimeter
G1 X42.114 Y93.331 E0.01156 ; perimeter
G1 X34.886 Y93.339 E0.22661 ; perimeter
G1 X34.886 Y88.524 E0.15099 ; perimeter
G1 X42.314 Y88.532 E0.23288 ; perimeter
G1 X42.609 Y88.311 E0.01156 ; perimeter
G1 X42.314 Y88.091 E0.01156 ; perimeter
G1 X34.886 Y88.099 E0.23288 ; perimeter
G1 X34.886 Y77.928 E0.31892 ; perimeter
G1 X51.031 Y77.928 E0.50620 ; perimeter
G1 X52.164 Y76.794 E0.05024 ; perimeter
G1 X52.164 Y71.428 E0.16827 ; perimeter
G1 X70.595 Y71.428 E0.57789 ; perimeter
G1 X70.586 Y73.829 E0.07530 ; perimeter
G1 X70.771 Y74.075 E0.00965 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X71.025 Y73.829 E-0.09346 ; wipe and retract
G1 X71.016 Y71.428 E-0.63377 ; wipe and retract
G1 X76.900 Y71.428 E-1.55278 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X65.180 Y108.991 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:External perimeter
G1 F1800.000
G1 X65.293 Y109.867 E0.02771 ; perimeter
G1 X66.198 Y110.500 E0.03460 ; perimeter
G1 X67.109 Y111.040 E0.03322 ; perimeter
G1 X69.582 Y112.563 E0.09105 ; perimeter
G1 X69.582 Y117.344 E0.14992 ; perimeter
G1 X72.029 Y117.344 E0.07671 ; perimeter
G1 X72.029 Y112.562 E0.14993 ; perimeter
G1 X74.502 Y111.040 E0.09104 ; perimeter
G1 X75.413 Y110.500 E0.03322 ; perimeter
G1 X76.318 Y109.867 E0.03460 ; perimeter
G1 X76.431 Y108.991 E0.02771 ; perimeter
G1 X77.625 Y109.340 E0.03903 ; perimeter
G1 X77.920 Y109.717 E0.01500 ; perimeter
G1 X78.028 Y109.884 E0.00623 ; perimeter
G1 X79.999 Y110.461 E0.06439 ; perimeter
G1 X80.179 Y110.377 E0.00623 ; perimeter
G1 X80.630 Y110.219 E0.01498 ; perimeter
G1 X81.785 Y110.550 E0.03769 ; perimeter
G1 X81.761 Y111.298 E0.02347 ; perimeter
G1 X81.654 Y112.266 E0.03053 ; perimeter
G1 X80.667 Y119.106 E0.21668 ; perimeter
G1 X80.192 Y119.408 E0.01764 ; perimeter
G1 X79.862 Y119.591 E0.01185 ; perimeter
G1 X79.474 Y119.869 E0.01494 ; perimeter
G1 X78.997 Y119.874 E0.01496 ; perimeter
G1 X78.799 Y119.858 E0.00623 ; perimeter
G1 X76.991 Y121.186 E0.07035 ; perimeter
G1 X76.948 Y121.380 E0.00622 ; perimeter
G1 X76.800 Y121.832 E0.01491 ; perimeter
G1 X75.999 Y122.452 E0.03178 ; perimeter
G1 X74.401 Y121.707 E0.05528 ; perimeter
G1 X73.561 Y121.422 E0.02781 ; perimeter
G1 X73.216 Y121.341 E0.01113 ; perimeter
G1 X73.216 Y123.428 E0.06545 ; perimeter
G1 X73.115 Y123.798 E0.01202 ; perimeter
G1 X73.115 Y124.490 E0.02168 ; perimeter
G1 X73.216 Y125.090 E0.01907 ; perimeter
G1 X73.216 Y125.784 E0.02177 ; perimeter
G1 X73.180 Y126.185 E0.01262 ; perimeter
G1 X73.072 Y126.591 E0.01318 ; perimeter
G1 X72.894 Y126.972 E0.01318 ; perimeter
G1 X72.652 Y127.318 E0.01323 ; perimeter
G1 X72.322 Y127.637 E0.01441 ; perimeter
G1 X72.011 Y127.855 E0.01188 ; perimeter
G1 X71.630 Y128.032 E0.01318 ; perimeter
G1 X71.224 Y128.141 E0.01318 ; perimeter
G1 X70.805 Y128.178 E0.01318 ; perimeter
G1 X70.387 Y128.141 E0.01318 ; perimeter
G1 X69.981 Y128.032 E0.01318 ; perimeter
G1 X69.600 Y127.855 E0.01318 ; perimeter
G1 X69.255 Y127.613 E0.01318 ; perimeter
G1 X68.958 Y127.316 E0.01318 ; perimeter
G1 X68.717 Y126.972 E0.01318 ; perimeter
G1 X68.539 Y126.591 E0.01318 ; perimeter
G1 X68.431 Y126.185 E0.01318 ; perimeter
G1 X68.395 Y125.784 E0.01262 ; perimeter
G1 X68.395 Y125.090 E0.02177 ; perimeter
G1 X68.495 Y124.490 E0.01907 ; perimeter
G1 X68.495 Y123.798 E0.02168 ; perimeter
G1 X68.395 Y123.428 E0.01202 ; perimeter
G1 X68.395 Y121.341 E0.06545 ; perimeter
G1 X68.050 Y121.422 E0.01113 ; perimeter
G1 X67.210 Y121.707 E0.02781 ; perimeter
G1 X65.612 Y122.452 E0.05528 ; perimeter
G1 X64.811 Y121.832 E0.03178 ; perimeter
G1 X64.663 Y121.380 E0.01491 ; perimeter
G1 X64.620 Y121.186 E0.00622 ; perimeter
G1 X62.812 Y119.858 E0.07035 ; perimeter
G1 X62.614 Y119.874 E0.00623 ; perimeter
G1 X62.137 Y119.869 E0.01496 ; perimeter
G1 X61.749 Y119.591 E0.01494 ; perimeter
G1 X61.419 Y119.408 E0.01185 ; perimeter
G1 X60.944 Y119.106 E0.01764 ; perimeter
G1 X59.957 Y112.266 E0.21668 ; perimeter
G1 X59.850 Y111.298 E0.03053 ; perimeter
G1 X59.826 Y110.550 E0.02347 ; perimeter
G1 X60.981 Y110.219 E0.03769 ; perimeter
G1 X61.432 Y110.377 E0.01498 ; perimeter
G1 X61.612 Y110.461 E0.00623 ; perimeter
G1 X63.583 Y109.884 E0.06439 ; perimeter
G1 X63.691 Y109.717 E0.00623 ; perimeter
G1 X63.986 Y109.340 E0.01500 ; perimeter
G1 X65.123 Y109.008 E0.03715 ; perimeter
G1 X65.569 Y108.897 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X65.293 Y109.867 E-0.23131 ; wipe and retract
G1 X66.198 Y110.500 E-0.29124 ; wipe and retract
G1 X67.109 Y111.040 E-0.27957 ; wipe and retract
G1 X69.582 Y112.563 E-0.76630 ; wipe and retract
G1 X69.582 Y115.259 E-0.71158 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X61.474 Y119.854 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X61.976 Y120.208 E0.01924 ; perimeter
G1 X62.489 Y120.504 E0.01858 ; perimeter
G1 X62.626 Y121.197 E0.02217 ; perimeter
G1 X63.912 Y122.149 E0.05019 ; perimeter
G1 X64.110 Y122.133 E0.00622 ; perimeter
G1 X64.588 Y122.139 E0.01500 ; perimeter
G1 X65.267 Y122.637 E0.02640 ; perimeter
G1 X64.852 Y123.202 E0.02198 ; perimeter
G1 X64.636 Y123.457 E0.01049 ; perimeter
G1 X64.234 Y124.032 E0.02199 ; perimeter
G1 X63.949 Y124.610 E0.02021 ; perimeter
G1 X63.778 Y125.201 E0.01928 ; perimeter
G1 X63.722 Y125.798 E0.01881 ; perimeter
G1 X63.778 Y126.395 E0.01881 ; perimeter
G1 X63.949 Y126.986 E0.01928 ; perimeter
G1 X64.233 Y127.563 E0.02017 ; perimeter
G1 X64.630 Y128.117 E0.02135 ; perimeter
G1 X65.134 Y128.637 E0.02271 ; perimeter
G1 X65.739 Y129.112 E0.02412 ; perimeter
G1 X66.435 Y129.533 E0.02550 ; perimeter
G1 X67.210 Y129.890 E0.02675 ; perimeter
G1 X68.050 Y130.175 E0.02782 ; perimeter
G1 X68.944 Y130.385 E0.02881 ; perimeter
G1 X70.617 Y130.666 E0.05318 ; perimeter
G1 X70.617 Y131.657 E0.03109 ; perimeter
G1 X70.338 Y132.046 E0.01500 ; perimeter
G1 X70.208 Y132.196 E0.00623 ; perimeter
G1 X70.216 Y138.195 E0.18811 ; perimeter
G1 X55.346 Y138.195 E0.46624 ; perimeter
G1 X55.354 Y135.708 E0.07800 ; perimeter
G1 X55.224 Y135.558 E0.00622 ; perimeter
G1 X54.945 Y135.169 E0.01500 ; perimeter
G1 X54.945 Y133.837 E0.04177 ; perimeter
G1 X55.651 Y133.747 E0.02231 ; perimeter
G1 X56.506 Y133.715 E0.02683 ; perimeter
G1 X56.506 Y131.941 E0.05560 ; perimeter
G1 X55.202 Y131.939 E0.04089 ; perimeter
G1 X55.219 Y129.483 E0.07701 ; perimeter
G1 X54.945 Y129.429 E0.00876 ; perimeter
G1 X54.945 Y128.690 E0.02316 ; perimeter
G1 X55.224 Y128.302 E0.01500 ; perimeter
G1 X55.354 Y128.152 E0.00623 ; perimeter
G1 X55.354 Y126.228 E0.06032 ; perimeter
G1 X55.224 Y126.078 E0.00623 ; perimeter
G1 X54.944 Y125.688 E0.01503 ; perimeter
G1 X54.949 Y125.173 E0.01617 ; perimeter
G1 X54.863 Y123.784 E0.04362 ; perimeter
G1 X54.859 Y122.817 E0.03032 ; perimeter
G1 X54.882 Y122.468 E0.01099 ; perimeter
G1 X54.953 Y122.111 E0.01140 ; perimeter
G1 X55.070 Y121.767 E0.01140 ; perimeter
G1 X55.231 Y121.440 E0.01140 ; perimeter
G1 X55.434 Y121.138 E0.01140 ; perimeter
G1 X55.673 Y120.865 E0.01140 ; perimeter
G1 X55.947 Y120.625 E0.01140 ; perimeter
G1 X56.249 Y120.423 E0.01140 ; perimeter
G1 X56.576 Y120.263 E0.01140 ; perimeter
G1 X56.920 Y120.146 E0.01140 ; perimeter
G1 X57.277 Y120.075 E0.01140 ; perimeter
G1 X57.640 Y120.051 E0.01140 ; perimeter
G1 X58.002 Y120.075 E0.01139 ; perimeter
G1 X58.359 Y120.146 E0.01140 ; perimeter
G1 X58.703 Y120.263 E0.01140 ; perimeter
G1 X59.030 Y120.425 E0.01144 ; perimeter
G1 X59.355 Y120.647 E0.01232 ; perimeter
G1 X59.605 Y120.866 E0.01045 ; perimeter
G1 X59.845 Y121.140 E0.01140 ; perimeter
G1 X60.047 Y121.442 E0.01140 ; perimeter
G1 X60.207 Y121.769 E0.01140 ; perimeter
G1 X60.324 Y122.113 E0.01140 ; perimeter
G1 X60.395 Y122.470 E0.01140 ; perimeter
G1 X60.418 Y122.819 E0.01098 ; perimeter
G1 X60.417 Y124.792 E0.06185 ; perimeter
G1 X60.696 Y124.792 E0.00876 ; perimeter
G1 X60.770 Y124.644 E0.00518 ; perimeter
G1 X60.938 Y124.189 E0.01520 ; perimeter
G1 X61.036 Y123.760 E0.01380 ; perimeter
G1 X61.045 Y120.925 E0.08888 ; perimeter
G1 X61.071 Y120.552 E0.01175 ; perimeter
G1 X61.155 Y120.016 E0.01700 ; perimeter
G1 X61.421 Y119.881 E0.00936 ; perimeter
G1 X61.695 Y119.521 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X61.976 Y120.208 E-0.16990 ; wipe and retract
G1 X62.489 Y120.504 E-0.15641 ; wipe and retract
G1 X62.626 Y121.197 E-0.18655 ; wipe and retract
G1 X63.912 Y122.149 E-0.42240 ; wipe and retract
G1 X64.110 Y122.133 E-0.05233 ; wipe and retract
G1 X64.588 Y122.139 E-0.12623 ; wipe and retract
G1 X65.267 Y122.637 E-0.22218 ; wipe and retract
G1 X64.852 Y123.202 E-0.18500 ; wipe and retract
G1 X64.636 Y123.457 E-0.08828 ; wipe and retract
G1 X64.234 Y124.032 E-0.18503 ; wipe and retract
G1 X63.949 Y124.610 E-0.17013 ; wipe and retract
G1 X63.778 Y125.201 E-0.16230 ; wipe and retract
G1 X63.723 Y125.779 E-0.15324 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X50.129 Y111.582 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X51.276 Y111.582 E0.03598 ; perimeter
G1 X51.665 Y111.861 E0.01500 ; perimeter
G1 X51.815 Y111.991 E0.00622 ; perimeter
G1 X53.579 Y111.991 E0.05531 ; perimeter
G1 X53.728 Y111.861 E0.00622 ; perimeter
G1 X54.117 Y111.582 E0.01500 ; perimeter
G1 X55.305 Y111.582 E0.03724 ; perimeter
G1 X55.277 Y112.411 E0.02599 ; perimeter
G1 X55.235 Y112.907 E0.01561 ; perimeter
G1 X54.279 Y119.632 E0.21297 ; perimeter
G1 X54.247 Y120.118 E0.01529 ; perimeter
G1 X54.244 Y123.760 E0.11418 ; perimeter
G1 X54.337 Y124.203 E0.01418 ; perimeter
G1 X54.574 Y125.000 E0.02608 ; perimeter
G1 X54.567 Y125.690 E0.02165 ; perimeter
G1 X54.289 Y126.078 E0.01496 ; perimeter
G1 X54.159 Y126.228 E0.00623 ; perimeter
G1 X54.159 Y128.152 E0.06032 ; perimeter
G1 X54.289 Y128.302 E0.00623 ; perimeter
G1 X54.568 Y128.690 E0.01500 ; perimeter
G1 X54.568 Y129.432 E0.02327 ; perimeter
G1 X54.024 Y129.528 E0.01732 ; perimeter
G1 X54.026 Y131.938 E0.07559 ; perimeter
G1 X52.722 Y131.940 E0.04088 ; perimeter
G1 X52.723 Y133.715 E0.05567 ; perimeter
G1 X53.291 Y133.719 E0.01782 ; perimeter
G1 X53.788 Y133.747 E0.01561 ; perimeter
G1 X54.568 Y133.834 E0.02460 ; perimeter
G1 X54.568 Y135.169 E0.04187 ; perimeter
G1 X54.289 Y135.558 E0.01500 ; perimeter
G1 X54.159 Y135.708 E0.00622 ; perimeter
G1 X54.167 Y138.195 E0.07800 ; perimeter
G1 X38.775 Y138.195 E0.48260 ; perimeter
G1 X38.141 Y138.145 E0.01994 ; perimeter
G1 X37.622 Y138.021 E0.01674 ; perimeter
G1 X37.129 Y137.817 E0.01674 ; perimeter
G1 X36.674 Y137.538 E0.01674 ; perimeter
G1 X36.268 Y137.191 E0.01674 ; perimeter
G1 X35.921 Y136.785 E0.01674 ; perimeter
G1 X35.642 Y136.330 E0.01674 ; perimeter
G1 X35.438 Y135.837 E0.01674 ; perimeter
G1 X35.313 Y135.318 E0.01674 ; perimeter
G1 X35.263 Y134.684 E0.01994 ; perimeter
G1 X35.263 Y122.837 E0.37144 ; perimeter
G1 X38.357 Y122.845 E0.09700 ; perimeter
G1 X38.507 Y122.715 E0.00622 ; perimeter
G1 X38.895 Y122.436 E0.01500 ; perimeter
G1 X40.591 Y122.436 E0.05316 ; perimeter
G1 X40.679 Y123.179 E0.02345 ; perimeter
G1 X40.708 Y123.641 E0.01452 ; perimeter
G1 X40.712 Y125.037 E0.04379 ; perimeter
G1 X41.854 Y125.038 E0.03582 ; perimeter
G1 X41.859 Y123.641 E0.04379 ; perimeter
G1 X41.887 Y123.179 E0.01452 ; perimeter
G1 X41.976 Y122.436 E0.02345 ; perimeter
G1 X43.671 Y122.436 E0.05313 ; perimeter
G1 X44.059 Y122.715 E0.01500 ; perimeter
G1 X44.209 Y122.845 E0.00622 ; perimeter
G1 X46.433 Y122.845 E0.06973 ; perimeter
G1 X46.583 Y122.715 E0.00622 ; perimeter
G1 X46.972 Y122.436 E0.01500 ; perimeter
G1 X48.214 Y122.436 E0.03896 ; perimeter
G1 X48.296 Y122.837 E0.01283 ; perimeter
G1 X49.597 Y122.821 E0.04079 ; perimeter
G1 X49.964 Y112.742 E0.31625 ; perimeter
G1 X50.017 Y112.242 E0.01575 ; perimeter
G1 X50.119 Y111.641 E0.01912 ; perimeter
G1 X50.148 Y111.182 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X51.276 Y111.582 E-0.30583 ; wipe and retract
G1 X51.665 Y111.861 E-0.12622 ; wipe and retract
G1 X51.815 Y111.991 E-0.05238 ; wipe and retract
G1 X53.579 Y111.991 E-0.46550 ; wipe and retract
G1 X53.728 Y111.861 E-0.05238 ; wipe and retract
G1 X54.117 Y111.582 E-0.12624 ; wipe and retract
G1 X55.305 Y111.582 E-0.31341 ; wipe and retract
G1 X55.277 Y112.411 E-0.21878 ; wipe and retract
G1 X55.235 Y112.907 E-0.13141 ; wipe and retract
G1 X54.975 Y114.737 E-0.48784 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X47.920 Y114.449 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X48.038 Y114.918 E0.01514 ; perimeter
G1 X48.094 Y115.495 E0.01819 ; perimeter
G1 X48.182 Y117.814 E0.07276 ; perimeter
G1 X48.282 Y120.941 E0.09810 ; perimeter
G1 X48.274 Y121.280 E0.01061 ; perimeter
G1 X48.207 Y122.059 E0.02453 ; perimeter
G1 X46.972 Y122.059 E0.03873 ; perimeter
G1 X46.583 Y121.780 E0.01500 ; perimeter
G1 X46.433 Y121.650 E0.00622 ; perimeter
G1 X44.209 Y121.650 E0.06973 ; perimeter
G1 X44.059 Y121.780 E0.00622 ; perimeter
G1 X43.671 Y122.059 E0.01500 ; perimeter
G1 X42.225 Y122.059 E0.04533 ; perimeter
G1 X41.978 Y122.018 E0.00784 ; perimeter
G1 X41.526 Y122.049 E0.01423 ; perimeter
G1 X41.041 Y122.049 E0.01519 ; perimeter
G1 X40.588 Y122.018 E0.01423 ; perimeter
G1 X40.342 Y122.059 E0.00784 ; perimeter
G1 X38.895 Y122.059 E0.04534 ; perimeter
G1 X38.507 Y121.780 E0.01500 ; perimeter
G1 X38.357 Y121.650 E0.00622 ; perimeter
G1 X35.263 Y121.658 E0.09700 ; perimeter
G1 X35.269 Y114.747 E0.21668 ; perimeter
G1 X35.297 Y114.237 E0.01604 ; perimeter
G1 X35.384 Y113.443 E0.02504 ; perimeter
G1 X37.500 Y113.443 E0.06635 ; perimeter
G1 X37.588 Y114.195 E0.02374 ; perimeter
G1 X37.616 Y114.666 E0.01480 ; perimeter
G1 X37.622 Y117.834 E0.09935 ; perimeter
G1 X37.669 Y118.023 E0.00610 ; perimeter
G1 X37.747 Y118.230 E0.00693 ; perimeter
G1 X37.848 Y118.427 E0.00693 ; perimeter
G1 X37.971 Y118.610 E0.00693 ; perimeter
G1 X38.114 Y118.779 E0.00693 ; perimeter
G1 X38.276 Y118.929 E0.00693 ; perimeter
G1 X38.454 Y119.060 E0.00693 ; perimeter
G1 X38.646 Y119.170 E0.00693 ; perimeter
G1 X39.050 Y119.316 E0.01347 ; perimeter
G1 X39.524 Y119.371 E0.01495 ; perimeter
G1 X41.900 Y119.371 E0.07450 ; perimeter
G1 X42.373 Y119.316 E0.01495 ; perimeter
G1 X42.777 Y119.170 E0.01347 ; perimeter
G1 X42.969 Y119.060 E0.00693 ; perimeter
G1 X43.147 Y118.929 E0.00693 ; perimeter
G1 X43.309 Y118.778 E0.00693 ; perimeter
G1 X43.452 Y118.610 E0.00693 ; perimeter
G1 X43.576 Y118.427 E0.00693 ; perimeter
G1 X43.677 Y118.230 E0.00693 ; perimeter
G1 X43.802 Y117.834 E0.01301 ; perimeter
G1 X43.807 Y115.647 E0.06858 ; perimeter
G1 X43.835 Y115.188 E0.01440 ; perimeter
G1 X43.924 Y114.450 E0.02333 ; perimeter
G1 X45.059 Y114.450 E0.03560 ; perimeter
G1 X45.448 Y114.728 E0.01500 ; perimeter
G1 X45.598 Y114.859 E0.00622 ; perimeter
G1 X46.352 Y114.859 E0.02365 ; perimeter
G1 X46.502 Y114.728 E0.00622 ; perimeter
G1 X46.890 Y114.450 E0.01500 ; perimeter
G1 X47.860 Y114.449 E0.03041 ; perimeter
G1 X48.310 Y114.358 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.038 Y114.918 E-0.13223 ; wipe and retract
G1 X48.094 Y115.495 E-0.15314 ; wipe and retract
G1 X48.182 Y117.814 E-0.61237 ; wipe and retract
G1 X48.282 Y120.941 E-0.82563 ; wipe and retract
G1 X48.274 Y121.280 E-0.08931 ; wipe and retract
G1 X48.207 Y122.059 E-0.20643 ; wipe and retract
G1 X47.218 Y122.059 E-0.26091 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X47.415 Y93.503 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X46.389 Y93.503 E0.03217 ; perimeter
G1 X46.297 Y92.849 E0.02073 ; perimeter
G1 X46.272 Y92.167 E0.02141 ; perimeter
G1 X44.111 Y92.166 E0.06776 ; perimeter
G1 X44.087 Y92.849 E0.02140 ; perimeter
G1 X43.984 Y93.363 E0.01645 ; perimeter
G1 X42.793 Y93.363 E0.03732 ; perimeter
G1 X42.405 Y93.084 E0.01500 ; perimeter
G1 X42.255 Y92.954 E0.00623 ; perimeter
G1 X35.263 Y92.962 E0.21921 ; perimeter
G1 X35.263 Y88.901 E0.12731 ; perimeter
G1 X42.455 Y88.909 E0.22548 ; perimeter
G1 X42.605 Y88.779 E0.00623 ; perimeter
G1 X42.993 Y88.500 E0.01500 ; perimeter
G1 X44.495 Y88.500 E0.04708 ; perimeter
G1 X44.577 Y89.194 E0.02191 ; perimeter
G1 X45.735 Y89.195 E0.03628 ; perimeter
G1 X45.817 Y88.500 E0.02194 ; perimeter
G1 X46.792 Y88.500 E0.03059 ; perimeter
G1 X47.181 Y88.779 E0.01500 ; perimeter
G1 X47.331 Y88.909 E0.00623 ; perimeter
G1 X47.895 Y88.909 E0.01767 ; perimeter
G1 X48.045 Y88.779 E0.00623 ; perimeter
G1 X48.433 Y88.500 E0.01500 ; perimeter
G1 X49.568 Y88.500 E0.03557 ; perimeter
G1 X49.657 Y89.210 E0.02242 ; perimeter
G1 X49.685 Y89.640 E0.01352 ; perimeter
G1 X49.688 Y90.283 E0.02015 ; perimeter
G1 X50.399 Y90.846 E0.02842 ; perimeter
G1 X50.373 Y92.343 E0.04696 ; perimeter
G1 X50.339 Y92.786 E0.01392 ; perimeter
G1 X50.241 Y93.504 E0.02271 ; perimeter
G1 X49.256 Y93.503 E0.03088 ; perimeter
G1 X48.867 Y93.225 E0.01500 ; perimeter
G1 X48.718 Y93.094 E0.00622 ; perimeter
G1 X47.953 Y93.094 E0.02396 ; perimeter
G1 X47.804 Y93.225 E0.00622 ; perimeter
G1 X47.464 Y93.469 E0.01312 ; perimeter
G1 X47.294 Y93.885 F10800.000 ; move inwards before travel
G1 X47.415 Y93.881 ; move to first perimeter point
G1 F1800.000
G1 X47.804 Y94.159 E0.01500 ; perimeter
G1 X47.953 Y94.290 E0.00622 ; perimeter
G1 X48.718 Y94.290 E0.02396 ; perimeter
G1 X48.867 Y94.159 E0.00622 ; perimeter
G1 X49.256 Y93.881 E0.01500 ; perimeter
G1 X50.235 Y93.881 E0.03069 ; perimeter
G1 X50.316 Y94.593 E0.02250 ; perimeter
G1 X50.338 Y95.504 E0.02855 ; perimeter
G1 X49.681 Y97.321 E0.06060 ; perimeter
G1 X49.677 Y100.597 E0.10270 ; perimeter
G1 X52.326 Y100.561 E0.08308 ; perimeter
G1 X52.229 Y97.285 E0.10277 ; perimeter
G1 X51.521 Y95.491 E0.06046 ; perimeter
G1 X51.329 Y90.835 E0.14612 ; perimeter
G1 X51.653 Y90.555 E0.01342 ; perimeter
G1 X52.101 Y90.222 E0.01751 ; perimeter
G1 X52.151 Y89.950 E0.00867 ; perimeter
G1 X53.172 Y89.950 E0.03201 ; perimeter
G1 X53.561 Y90.229 E0.01500 ; perimeter
G1 X53.711 Y90.359 E0.00623 ; perimeter
G1 X54.175 Y90.359 E0.01454 ; perimeter
G1 X54.325 Y90.229 E0.00623 ; perimeter
G1 X54.713 Y89.950 E0.01500 ; perimeter
G1 X55.719 Y89.948 E0.03153 ; perimeter
G1 X55.832 Y90.313 E0.01198 ; perimeter
G1 X55.889 Y90.685 E0.01180 ; perimeter
G1 X55.966 Y91.473 E0.02483 ; perimeter
G1 X58.575 Y91.473 E0.08179 ; perimeter
G1 X58.656 Y90.790 E0.02156 ; perimeter
G1 X58.806 Y90.298 E0.01613 ; perimeter
G1 X59.906 Y90.723 E0.03698 ; perimeter
G1 X60.168 Y91.123 E0.01500 ; perimeter
G1 X60.261 Y91.298 E0.00622 ; perimeter
G1 X60.983 Y91.577 E0.02427 ; perimeter
G1 X61.170 Y91.509 E0.00622 ; perimeter
G1 X61.633 Y91.389 E0.01500 ; perimeter
G1 X62.471 Y91.712 E0.02817 ; perimeter
G1 X61.760 Y92.719 E0.03863 ; perimeter
G1 X61.436 Y93.262 E0.01983 ; perimeter
G1 X61.181 Y93.838 E0.01976 ; perimeter
G1 X60.995 Y94.447 E0.01996 ; perimeter
G1 X60.882 Y95.078 E0.02011 ; perimeter
G1 X60.844 Y95.721 E0.02019 ; perimeter
G1 X60.882 Y96.364 E0.02019 ; perimeter
G1 X60.995 Y96.996 E0.02011 ; perimeter
G1 X61.181 Y97.605 E0.01996 ; perimeter
G1 X61.436 Y98.180 E0.01974 ; perimeter
G1 X61.756 Y98.712 E0.01946 ; perimeter
G1 X62.134 Y99.191 E0.01915 ; perimeter
G1 X62.564 Y99.610 E0.01882 ; perimeter
G1 X63.038 Y99.962 E0.01850 ; perimeter
G1 X63.547 Y100.241 E0.01820 ; perimeter
G1 X64.083 Y100.443 E0.01796 ; perimeter
G1 X64.637 Y100.566 E0.01779 ; perimeter
G1 X65.202 Y100.608 E0.01777 ; perimeter
G1 X65.819 Y100.572 E0.01935 ; perimeter
G1 X68.044 Y100.710 E0.06989 ; perimeter
G1 X69.401 Y100.715 E0.04257 ; perimeter
G1 X69.869 Y100.743 E0.01468 ; perimeter
G1 X70.617 Y100.832 E0.02363 ; perimeter
G1 X70.617 Y101.987 E0.03623 ; perimeter
G1 X70.338 Y102.376 E0.01500 ; perimeter
G1 X70.208 Y102.526 E0.00623 ; perimeter
G1 X70.208 Y104.619 E0.06564 ; perimeter
G1 X70.338 Y104.769 E0.00623 ; perimeter
G1 X70.617 Y105.158 E0.01500 ; perimeter
G1 X70.617 Y106.264 E0.03468 ; perimeter
G1 X70.510 Y106.288 E0.00344 ; perimeter
G1 X70.531 Y106.896 E0.01906 ; perimeter
G1 X70.532 Y108.666 E0.05551 ; perimeter
G1 X66.010 Y108.667 E0.14178 ; perimeter
G1 X65.155 Y108.631 E0.02681 ; perimeter
G1 X64.653 Y108.752 E0.01621 ; perimeter
G1 X63.880 Y108.978 E0.02525 ; perimeter
G1 X63.428 Y108.820 E0.01500 ; perimeter
G1 X63.248 Y108.737 E0.00623 ; perimeter
G1 X61.277 Y109.313 E0.06439 ; perimeter
G1 X61.170 Y109.480 E0.00623 ; perimeter
G1 X60.875 Y109.857 E0.01500 ; perimeter
G1 X59.793 Y110.173 E0.03532 ; perimeter
G1 X59.609 Y109.575 E0.01964 ; perimeter
G1 X59.481 Y109.004 E0.01834 ; perimeter
G1 X59.397 Y108.763 E0.00801 ; perimeter
G1 X59.286 Y108.539 E0.00782 ; perimeter
G1 X59.148 Y108.333 E0.00779 ; perimeter
G1 X58.984 Y108.146 E0.00777 ; perimeter
G1 X58.798 Y107.983 E0.00777 ; perimeter
G1 X58.592 Y107.845 E0.00777 ; perimeter
G1 X58.370 Y107.736 E0.00777 ; perimeter
G1 X58.135 Y107.656 E0.00777 ; perimeter
G1 X57.892 Y107.608 E0.00777 ; perimeter
G1 X57.645 Y107.591 E0.00777 ; perimeter
G1 X57.397 Y107.608 E0.00777 ; perimeter
G1 X57.154 Y107.656 E0.00777 ; perimeter
G1 X56.920 Y107.736 E0.00777 ; perimeter
G1 X56.698 Y107.845 E0.00777 ; perimeter
G1 X56.532 Y107.956 E0.00625 ; perimeter
G1 X56.304 Y108.148 E0.00934 ; perimeter
G1 X56.142 Y108.332 E0.00770 ; perimeter
G1 X56.005 Y108.538 E0.00777 ; perimeter
G1 X55.895 Y108.760 E0.00776 ; perimeter
G1 X55.817 Y108.991 E0.00765 ; perimeter
G1 X55.634 Y110.118 E0.03577 ; perimeter
G1 X55.546 Y110.545 E0.01369 ; perimeter
G1 X55.367 Y111.211 E0.02162 ; perimeter
G1 X54.117 Y111.205 E0.03920 ; perimeter
G1 X53.728 Y110.927 E0.01498 ; perimeter
G1 X53.579 Y110.796 E0.00622 ; perimeter
G1 X51.815 Y110.796 E0.05531 ; perimeter
G1 X51.665 Y110.927 E0.00622 ; perimeter
G1 X51.276 Y111.205 E0.01500 ; perimeter
G1 X50.158 Y111.205 E0.03506 ; perimeter
G1 X50.086 Y110.581 E0.01969 ; perimeter
G1 X50.097 Y109.508 E0.03366 ; perimeter
G1 X51.111 Y106.073 E0.11229 ; perimeter
G1 X50.885 Y103.935 E0.06740 ; perimeter
G1 X47.071 Y103.935 E0.11957 ; perimeter
G1 X46.845 Y106.073 E0.06740 ; perimeter
G1 X47.858 Y109.505 E0.11219 ; perimeter
G1 X47.993 Y112.794 E0.10322 ; perimeter
G1 X47.983 Y113.286 E0.01544 ; perimeter
G1 X47.922 Y114.073 E0.02472 ; perimeter
G1 X46.890 Y114.073 E0.03236 ; perimeter
G1 X46.502 Y113.794 E0.01500 ; perimeter
G1 X46.352 Y113.664 E0.00622 ; perimeter
G1 X45.598 Y113.664 E0.02365 ; perimeter
G1 X45.448 Y113.794 E0.00622 ; perimeter
G1 X45.059 Y114.073 E0.01500 ; perimeter
G1 X43.923 Y114.073 E0.03564 ; perimeter
G1 X43.835 Y113.304 E0.02425 ; perimeter
G1 X43.807 Y112.818 E0.01528 ; perimeter
G1 X43.802 Y109.025 E0.11893 ; perimeter
G1 X43.737 Y107.857 E0.03667 ; perimeter
G1 X43.657 Y107.292 E0.01789 ; perimeter
G1 X43.546 Y106.726 E0.01807 ; perimeter
G1 X43.403 Y106.168 E0.01807 ; perimeter
G1 X43.229 Y105.618 E0.01807 ; perimeter
G1 X43.025 Y105.079 E0.01807 ; perimeter
G1 X42.791 Y104.553 E0.01807 ; perimeter
G1 X42.528 Y104.040 E0.01807 ; perimeter
G1 X42.045 Y103.252 E0.02896 ; perimeter
G1 X41.669 Y102.843 E0.01744 ; perimeter
G1 X41.198 Y102.580 E0.01691 ; perimeter
G1 X40.829 Y102.495 E0.01187 ; perimeter
G1 X40.594 Y102.495 E0.00736 ; perimeter
G1 X40.226 Y102.580 E0.01187 ; perimeter
G1 X39.755 Y102.843 E0.01691 ; perimeter
G1 X39.378 Y103.252 E0.01744 ; perimeter
G1 X38.895 Y104.040 E0.02896 ; perimeter
G1 X38.633 Y104.553 E0.01807 ; perimeter
G1 X38.399 Y105.079 E0.01807 ; perimeter
G1 X38.195 Y105.618 E0.01807 ; perimeter
G1 X38.021 Y106.168 E0.01807 ; perimeter
G1 X37.878 Y106.726 E0.01807 ; perimeter
G1 X37.766 Y107.292 E0.01807 ; perimeter
G1 X37.687 Y107.857 E0.01789 ; perimeter
G1 X37.622 Y109.025 E0.03667 ; perimeter
G1 X37.616 Y111.825 E0.08781 ; perimeter
G1 X37.588 Y112.305 E0.01506 ; perimeter
G1 X37.500 Y113.066 E0.02402 ; perimeter
G1 X35.384 Y113.066 E0.06635 ; perimeter
G1 X35.297 Y112.277 E0.02487 ; perimeter
G1 X35.264 Y111.282 E0.03123 ; perimeter
G1 X35.263 Y94.141 E0.53743 ; perimeter
G1 X42.255 Y94.149 E0.21921 ; perimeter
G1 X42.405 Y94.019 E0.00623 ; perimeter
G1 X42.793 Y93.740 E0.01500 ; perimeter
G1 X43.994 Y93.740 E0.03763 ; perimeter
G1 X44.086 Y94.383 E0.02037 ; perimeter
G1 X44.110 Y94.942 E0.01755 ; perimeter
G1 X46.274 Y94.942 E0.06787 ; perimeter
G1 X46.297 Y94.386 E0.01744 ; perimeter
G1 X46.400 Y93.881 E0.01619 ; perimeter
G1 X47.355 Y93.881 E0.02993 ; perimeter
G1 X47.701 Y93.601 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X47.804 Y94.159 E-0.13942 ; wipe and retract
G1 X47.953 Y94.290 E-0.05236 ; wipe and retract
G1 X48.718 Y94.290 E-0.20165 ; wipe and retract
G1 X48.867 Y94.159 E-0.05236 ; wipe and retract
G1 X49.256 Y93.881 E-0.12625 ; wipe and retract
G1 X50.235 Y93.881 E-0.25827 ; wipe and retract
G1 X50.316 Y94.593 E-0.18935 ; wipe and retract
G1 X50.338 Y95.504 E-0.24032 ; wipe and retract
G1 X49.681 Y97.321 E-0.50999 ; wipe and retract
G1 X49.678 Y99.254 E-0.51004 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X62.931 Y95.670 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X63.063 Y95.236 E0.01422 ; perimeter
G1 X63.277 Y94.836 E0.01422 ; perimeter
G1 X63.564 Y94.486 E0.01422 ; perimeter
G1 X63.915 Y94.198 E0.01422 ; perimeter
G1 X64.315 Y93.984 E0.01424 ; perimeter
G1 X64.765 Y93.851 E0.01471 ; perimeter
G1 X65.194 Y93.809 E0.01351 ; perimeter
G1 X65.639 Y93.829 E0.01396 ; perimeter
G1 X66.094 Y93.918 E0.01454 ; perimeter
G1 X66.528 Y94.119 E0.01501 ; perimeter
G1 X66.903 Y94.418 E0.01503 ; perimeter
G1 X67.202 Y94.792 E0.01503 ; perimeter
G1 X67.403 Y95.227 E0.01501 ; perimeter
G1 X67.492 Y95.681 E0.01452 ; perimeter
G1 X67.514 Y96.121 E0.01381 ; perimeter
G1 X67.492 Y96.561 E0.01381 ; perimeter
G1 X67.403 Y97.016 E0.01452 ; perimeter
G1 X67.202 Y97.450 E0.01501 ; perimeter
G1 X66.903 Y97.825 E0.01503 ; perimeter
G1 X66.528 Y98.124 E0.01503 ; perimeter
G1 X66.094 Y98.325 E0.01501 ; perimeter
G1 X65.639 Y98.413 E0.01454 ; perimeter
G1 X65.194 Y98.434 E0.01396 ; perimeter
G1 X64.748 Y98.390 E0.01404 ; perimeter
G1 X64.315 Y98.258 E0.01422 ; perimeter
G1 X63.915 Y98.044 E0.01422 ; perimeter
G1 X63.564 Y97.757 E0.01422 ; perimeter
G1 X63.277 Y97.406 E0.01422 ; perimeter
G1 X63.063 Y97.006 E0.01422 ; perimeter
G1 X62.931 Y96.572 E0.01422 ; perimeter
G1 X62.887 Y96.121 E0.01422 ; perimeter
G1 X62.925 Y95.730 E0.01234 ; perimeter
G1 X62.630 Y95.406 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X63.063 Y95.236 E-0.13522 ; wipe and retract
G1 X63.277 Y94.836 E-0.11966 ; wipe and retract
G1 X63.564 Y94.486 E-0.11965 ; wipe and retract
G1 X63.915 Y94.198 E-0.11964 ; wipe and retract
G1 X64.315 Y93.984 E-0.11986 ; wipe and retract
G1 X64.765 Y93.851 E-0.12384 ; wipe and retract
G1 X65.194 Y93.809 E-0.11373 ; wipe and retract
G1 X65.639 Y93.829 E-0.11750 ; wipe and retract
G1 X66.094 Y93.918 E-0.12237 ; wipe and retract
G1 X66.528 Y94.119 E-0.12631 ; wipe and retract
G1 X66.903 Y94.418 E-0.12649 ; wipe and retract
G1 X67.202 Y94.792 E-0.12648 ; wipe and retract
G1 X67.403 Y95.227 E-0.12631 ; wipe and retract
G1 X67.492 Y95.681 E-0.12221 ; wipe and retract
G1 X67.514 Y96.121 E-0.11623 ; wipe and retract
G1 X67.492 Y96.561 E-0.11623 ; wipe and retract
G1 X67.403 Y97.016 E-0.12221 ; wipe and retract
G1 X67.202 Y97.450 E-0.12631 ; wipe and retract
G1 X67.014 Y97.686 E-0.07974 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X69.401 Y91.247 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X68.254 Y93.527 E0.08001 ; perimeter
G1 X66.594 Y93.518 E0.05206 ; perimeter
G1 X65.206 Y93.431 E0.04359 ; perimeter
G1 X64.675 Y93.482 E0.01675 ; perimeter
G1 X64.170 Y93.636 E0.01655 ; perimeter
G1 X63.705 Y93.884 E0.01651 ; perimeter
G1 X63.297 Y94.219 E0.01655 ; perimeter
G1 X62.963 Y94.626 E0.01654 ; perimeter
G1 X62.714 Y95.092 E0.01654 ; perimeter
G1 X62.561 Y95.597 E0.01655 ; perimeter
G1 X62.509 Y96.121 E0.01651 ; perimeter
G1 X62.561 Y96.646 E0.01655 ; perimeter
G1 X62.714 Y97.151 E0.01654 ; perimeter
G1 X62.963 Y97.616 E0.01654 ; perimeter
G1 X63.297 Y98.024 E0.01654 ; perimeter
G1 X63.705 Y98.358 E0.01654 ; perimeter
G1 X64.170 Y98.607 E0.01654 ; perimeter
G1 X64.675 Y98.760 E0.01653 ; perimeter
G1 X65.206 Y98.811 E0.01674 ; perimeter
G1 X66.480 Y98.727 E0.04002 ; perimeter
G1 X67.796 Y98.718 E0.04126 ; perimeter
G1 X67.801 Y97.619 E0.03444 ; perimeter
G1 X67.890 Y96.126 E0.04691 ; perimeter
G1 X67.812 Y94.754 E0.04309 ; perimeter
G1 X68.600 Y94.723 E0.02473 ; perimeter
G1 X70.215 Y94.715 E0.05063 ; perimeter
G1 X70.215 Y100.207 E0.17219 ; perimeter
G1 X65.185 Y100.205 E0.15769 ; perimeter
G1 X64.695 Y100.171 E0.01542 ; perimeter
G1 X64.196 Y100.061 E0.01601 ; perimeter
G1 X63.712 Y99.878 E0.01620 ; perimeter
G1 X63.252 Y99.626 E0.01648 ; perimeter
G1 X62.821 Y99.306 E0.01681 ; perimeter
G1 X62.429 Y98.924 E0.01718 ; perimeter
G1 X62.082 Y98.485 E0.01755 ; perimeter
G1 X61.788 Y97.995 E0.01790 ; perimeter
G1 X61.552 Y97.465 E0.01821 ; perimeter
G1 X61.380 Y96.902 E0.01845 ; perimeter
G1 X61.276 Y96.317 E0.01862 ; perimeter
G1 X61.240 Y95.721 E0.01871 ; perimeter
G1 X61.276 Y95.125 E0.01871 ; perimeter
G1 X61.380 Y94.541 E0.01862 ; perimeter
G1 X61.552 Y93.978 E0.01845 ; perimeter
G1 X61.788 Y93.447 E0.01821 ; perimeter
G1 X62.082 Y92.958 E0.01790 ; perimeter
G1 X62.429 Y92.519 E0.01755 ; perimeter
G1 X62.821 Y92.136 E0.01718 ; perimeter
G1 X63.252 Y91.817 E0.01681 ; perimeter
G1 X63.712 Y91.564 E0.01648 ; perimeter
G1 X64.196 Y91.382 E0.01620 ; perimeter
G1 X64.695 Y91.272 E0.01601 ; perimeter
G1 X65.185 Y91.238 E0.01543 ; perimeter
G1 X69.341 Y91.247 E0.13029 ; perimeter
G1 X69.782 Y91.369 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X68.254 Y93.527 E-0.66648 ; wipe and retract
G1 X66.594 Y93.518 E-0.43813 ; wipe and retract
G1 X65.206 Y93.431 E-0.36689 ; wipe and retract
G1 X64.675 Y93.482 E-0.14098 ; wipe and retract
G1 X64.170 Y93.636 E-0.13926 ; wipe and retract
G1 X63.705 Y93.884 E-0.13894 ; wipe and retract
G1 X63.297 Y94.219 E-0.13932 ; wipe and retract
G1 X62.963 Y94.626 E-0.13918 ; wipe and retract
G1 X62.765 Y94.997 E-0.11080 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X63.931 Y83.856 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X64.296 Y84.320 E0.01852 ; perimeter
G1 X64.537 Y84.678 E0.01354 ; perimeter
G1 X65.050 Y85.314 E0.02562 ; perimeter
G1 X65.656 Y85.886 E0.02613 ; perimeter
G1 X66.360 Y86.395 E0.02721 ; perimeter
G1 X67.142 Y86.825 E0.02801 ; perimeter
G1 X67.994 Y87.170 E0.02879 ; perimeter
G1 X68.900 Y87.421 E0.02948 ; perimeter
G1 X70.617 Y87.734 E0.05473 ; perimeter
G1 X70.617 Y90.760 E0.09487 ; perimeter
G1 X69.824 Y90.846 E0.02501 ; perimeter
G1 X69.314 Y90.872 E0.01600 ; perimeter
G1 X65.809 Y90.869 E0.10991 ; perimeter
G1 X65.203 Y90.834 E0.01904 ; perimeter
G1 X64.637 Y90.877 E0.01778 ; perimeter
G1 X64.082 Y90.999 E0.01783 ; perimeter
G1 X63.534 Y91.201 E0.01831 ; perimeter
G1 X62.854 Y91.527 E0.02364 ; perimeter
G1 X62.290 Y91.241 E0.01981 ; perimeter
G1 X61.768 Y91.037 E0.01759 ; perimeter
G1 X61.506 Y90.637 E0.01498 ; perimeter
G1 X61.413 Y90.462 E0.00622 ; perimeter
G1 X60.691 Y90.183 E0.02427 ; perimeter
G1 X60.505 Y90.251 E0.00622 ; perimeter
G1 X60.042 Y90.371 E0.01500 ; perimeter
G1 X59.315 Y90.091 E0.02441 ; perimeter
G1 X58.768 Y89.912 E0.01803 ; perimeter
G1 X58.758 Y88.879 E0.03239 ; perimeter
G1 X58.916 Y86.333 E0.08000 ; perimeter
G1 X58.994 Y85.444 E0.02796 ; perimeter
G1 X59.102 Y84.751 E0.02200 ; perimeter
G1 X59.758 Y84.656 E0.02078 ; perimeter
G1 X60.678 Y84.482 E0.02934 ; perimeter
G1 X61.111 Y84.683 E0.01500 ; perimeter
G1 X61.283 Y84.783 E0.00622 ; perimeter
G1 X62.122 Y84.625 E0.02678 ; perimeter
G1 X62.245 Y84.469 E0.00622 ; perimeter
G1 X62.575 Y84.123 E0.01500 ; perimeter
G1 X63.872 Y83.868 E0.04144 ; perimeter
G1 X64.269 Y83.643 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X64.296 Y84.320 E-0.16357 ; wipe and retract
G1 X64.537 Y84.678 E-0.11393 ; wipe and retract
G1 X65.050 Y85.314 E-0.21564 ; wipe and retract
G1 X65.656 Y85.886 E-0.21995 ; wipe and retract
G1 X66.360 Y86.395 E-0.22902 ; wipe and retract
G1 X67.142 Y86.825 E-0.23574 ; wipe and retract
G1 X67.994 Y87.170 E-0.24234 ; wipe and retract
G1 X68.900 Y87.421 E-0.24814 ; wipe and retract
G1 X70.617 Y87.734 E-0.46065 ; wipe and retract
G1 X70.617 Y88.307 E-0.15101 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X67.338 Y82.760 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X67.246 Y82.299 E0.01472 ; perimeter
G1 X67.215 Y81.829 E0.01476 ; perimeter
G1 X67.255 Y81.317 E0.01609 ; perimeter
G1 X67.338 Y80.901 E0.01331 ; perimeter
G1 X67.489 Y80.455 E0.01476 ; perimeter
G1 X67.721 Y79.998 E0.01609 ; perimeter
G1 X67.957 Y79.645 E0.01331 ; perimeter
G1 X68.267 Y79.292 E0.01472 ; perimeter
G1 X68.620 Y78.982 E0.01472 ; perimeter
G1 X69.010 Y78.721 E0.01472 ; perimeter
G1 X69.432 Y78.514 E0.01472 ; perimeter
G1 X69.876 Y78.363 E0.01472 ; perimeter
G1 X70.337 Y78.271 E0.01472 ; perimeter
G1 X70.760 Y78.243 E0.01331 ; perimeter
G1 X71.273 Y78.271 E0.01609 ; perimeter
G1 X71.735 Y78.363 E0.01476 ; perimeter
G1 X72.179 Y78.514 E0.01472 ; perimeter
G1 X72.601 Y78.721 E0.01472 ; perimeter
G1 X72.991 Y78.982 E0.01472 ; perimeter
G1 X73.344 Y79.292 E0.01472 ; perimeter
G1 X73.654 Y79.645 E0.01472 ; perimeter
G1 X73.915 Y80.035 E0.01472 ; perimeter
G1 X74.122 Y80.456 E0.01472 ; perimeter
G1 X74.273 Y80.901 E0.01472 ; perimeter
G1 X74.356 Y81.317 E0.01331 ; perimeter
G1 X74.396 Y81.830 E0.01613 ; perimeter
G1 X74.356 Y82.343 E0.01613 ; perimeter
G1 X74.273 Y82.760 E0.01331 ; perimeter
G1 X74.122 Y83.204 E0.01472 ; perimeter
G1 X73.915 Y83.625 E0.01472 ; perimeter
G1 X73.654 Y84.016 E0.01472 ; perimeter
G1 X73.344 Y84.369 E0.01472 ; perimeter
G1 X72.991 Y84.679 E0.01473 ; perimeter
G1 X72.601 Y84.939 E0.01472 ; perimeter
G1 X72.179 Y85.147 E0.01472 ; perimeter
G1 X71.735 Y85.298 E0.01472 ; perimeter
G1 X71.274 Y85.390 E0.01472 ; perimeter
G1 X70.805 Y85.421 E0.01473 ; perimeter
G1 X70.337 Y85.390 E0.01472 ; perimeter
G1 X69.876 Y85.298 E0.01472 ; perimeter
G1 X69.430 Y85.147 E0.01476 ; perimeter
G1 X68.973 Y84.914 E0.01609 ; perimeter
G1 X68.620 Y84.679 E0.01331 ; perimeter
G1 X68.267 Y84.369 E0.01472 ; perimeter
G1 X67.957 Y84.016 E0.01472 ; perimeter
G1 X67.696 Y83.625 E0.01472 ; perimeter
G1 X67.489 Y83.204 E0.01472 ; perimeter
G1 X67.357 Y82.816 E0.01284 ; perimeter
G1 X66.951 Y82.656 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X67.246 Y82.299 E-0.13963 ; wipe and retract
G1 X67.215 Y81.829 E-0.12426 ; wipe and retract
G1 X67.255 Y81.317 E-0.13544 ; wipe and retract
G1 X67.338 Y80.901 E-0.11198 ; wipe and retract
G1 X67.489 Y80.455 E-0.12425 ; wipe and retract
G1 X67.721 Y79.998 E-0.13545 ; wipe and retract
G1 X67.957 Y79.645 E-0.11199 ; wipe and retract
G1 X68.267 Y79.292 E-0.12392 ; wipe and retract
G1 X68.620 Y78.982 E-0.12393 ; wipe and retract
G1 X69.010 Y78.721 E-0.12392 ; wipe and retract
G1 X69.432 Y78.514 E-0.12393 ; wipe and retract
G1 X69.876 Y78.363 E-0.12393 ; wipe and retract
G1 X70.337 Y78.271 E-0.12392 ; wipe and retract
G1 X70.760 Y78.243 E-0.11199 ; wipe and retract
G1 X71.273 Y78.271 E-0.13545 ; wipe and retract
G1 X71.735 Y78.363 E-0.12425 ; wipe and retract
G1 X72.179 Y78.514 E-0.12393 ; wipe and retract
G1 X72.601 Y78.721 E-0.12393 ; wipe and retract
G1 X72.707 Y78.793 E-0.03391 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.994 Y75.900 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X70.994 Y74.508 E0.04363 ; perimeter
G1 X71.273 Y74.119 E0.01500 ; perimeter
G1 X71.403 Y73.970 E0.00622 ; perimeter
G1 X71.395 Y71.805 E0.06789 ; perimeter
G1 X102.836 Y71.805 E0.98581 ; perimeter
G1 X103.470 Y71.855 E0.01994 ; perimeter
G1 X103.989 Y71.979 E0.01674 ; perimeter
G1 X104.482 Y72.183 E0.01674 ; perimeter
G1 X104.937 Y72.462 E0.01674 ; perimeter
G1 X105.343 Y72.809 E0.01674 ; perimeter
G1 X105.690 Y73.215 E0.01674 ; perimeter
G1 X105.969 Y73.670 E0.01674 ; perimeter
G1 X106.173 Y74.163 E0.01674 ; perimeter
G1 X106.298 Y74.682 E0.01674 ; perimeter
G1 X106.348 Y75.316 E0.01994 ; perimeter
G1 X106.348 Y87.722 E0.38896 ; perimeter
G1 X99.156 Y87.714 E0.22548 ; perimeter
G1 X99.006 Y87.844 E0.00623 ; perimeter
G1 X98.618 Y88.123 E0.01500 ; perimeter
G1 X97.124 Y88.123 E0.04683 ; perimeter
G1 X97.028 Y87.539 E0.01855 ; perimeter
G1 X96.989 Y86.355 E0.03713 ; perimeter
G1 X97.496 Y86.240 E0.01629 ; perimeter
G1 X97.989 Y86.050 E0.01657 ; perimeter
G1 X98.448 Y85.789 E0.01656 ; perimeter
G1 X98.864 Y85.464 E0.01656 ; perimeter
G1 X99.228 Y85.082 E0.01656 ; perimeter
G1 X99.532 Y84.650 E0.01656 ; perimeter
G1 X99.769 Y84.178 E0.01656 ; perimeter
G1 X99.935 Y83.676 E0.01656 ; perimeter
G1 X100.024 Y83.163 E0.01633 ; perimeter
G1 X100.038 Y82.628 E0.01678 ; perimeter
G1 X99.973 Y82.104 E0.01655 ; perimeter
G1 X99.832 Y81.595 E0.01656 ; perimeter
G1 X99.618 Y81.115 E0.01649 ; perimeter
G1 X99.333 Y80.683 E0.01625 ; perimeter
G1 X99.161 Y80.676 E0.00539 ; perimeter
G1 X98.420 Y81.418 E0.03288 ; perimeter
G1 X98.681 Y81.882 E0.01670 ; perimeter
G1 X98.819 Y82.334 E0.01483 ; perimeter
G1 X98.865 Y82.805 E0.01483 ; perimeter
G1 X98.819 Y83.275 E0.01482 ; perimeter
G1 X98.682 Y83.728 E0.01483 ; perimeter
G1 X98.459 Y84.145 E0.01483 ; perimeter
G1 X98.159 Y84.511 E0.01483 ; perimeter
G1 X97.794 Y84.811 E0.01482 ; perimeter
G1 X97.379 Y85.033 E0.01476 ; perimeter
G1 X96.925 Y85.181 E0.01499 ; perimeter
G1 X96.447 Y85.207 E0.01499 ; perimeter
G1 X95.988 Y85.173 E0.01442 ; perimeter
G1 X95.531 Y85.035 E0.01499 ; perimeter
G1 X95.114 Y84.812 E0.01482 ; perimeter
G1 X94.748 Y84.512 E0.01483 ; perimeter
G1 X94.448 Y84.147 E0.01483 ; perimeter
G1 X94.225 Y83.730 E0.01483 ; perimeter
G1 X94.088 Y83.277 E0.01482 ; perimeter
G1 X94.041 Y82.807 E0.01483 ; perimeter
G1 X94.087 Y82.336 E0.01483 ; perimeter
G1 X94.224 Y81.884 E0.01483 ; perimeter
G1 X94.486 Y81.419 E0.01670 ; perimeter
G1 X93.744 Y80.678 E0.03288 ; perimeter
G1 X93.572 Y80.685 E0.00539 ; perimeter
G1 X93.287 Y81.117 E0.01625 ; perimeter
G1 X93.074 Y81.598 E0.01649 ; perimeter
G1 X92.933 Y82.107 E0.01656 ; perimeter
G1 X92.869 Y82.631 E0.01656 ; perimeter
G1 X92.882 Y83.159 E0.01656 ; perimeter
G1 X92.972 Y83.679 E0.01656 ; perimeter
G1 X93.138 Y84.180 E0.01656 ; perimeter
G1 X93.376 Y84.652 E0.01656 ; perimeter
G1 X93.680 Y85.084 E0.01656 ; perimeter
G1 X94.044 Y85.466 E0.01656 ; perimeter
G1 X94.460 Y85.791 E0.01656 ; perimeter
G1 X94.920 Y86.051 E0.01656 ; perimeter
G1 X95.413 Y86.241 E0.01657 ; perimeter
G1 X95.919 Y86.356 E0.01626 ; perimeter
G1 X95.881 Y87.563 E0.03788 ; perimeter
G1 X95.784 Y88.123 E0.01781 ; perimeter
G1 X94.819 Y88.123 E0.03028 ; perimeter
G1 X94.430 Y87.844 E0.01500 ; perimeter
G1 X94.280 Y87.714 E0.00623 ; perimeter
G1 X93.716 Y87.714 E0.01767 ; perimeter
G1 X93.566 Y87.844 E0.00623 ; perimeter
G1 X93.178 Y88.123 E0.01500 ; perimeter
G1 X92.069 Y88.123 E0.03475 ; perimeter
G1 X91.951 Y87.714 E0.01334 ; perimeter
G1 X91.978 Y87.155 E0.01754 ; perimeter
G1 X89.632 Y87.119 E0.07359 ; perimeter
G1 X89.667 Y87.680 E0.01763 ; perimeter
G1 X89.654 Y88.097 E0.01308 ; perimeter
G1 X89.598 Y88.897 E0.02514 ; perimeter
G1 X89.487 Y89.573 E0.02148 ; perimeter
G1 X88.438 Y89.573 E0.03288 ; perimeter
G1 X88.050 Y89.294 E0.01500 ; perimeter
G1 X87.900 Y89.164 E0.00623 ; perimeter
G1 X87.436 Y89.164 E0.01454 ; perimeter
G1 X87.286 Y89.294 E0.00623 ; perimeter
G1 X86.898 Y89.573 E0.01500 ; perimeter
G1 X85.904 Y89.573 E0.03116 ; perimeter
G1 X85.872 Y88.770 E0.02520 ; perimeter
G1 X85.880 Y88.275 E0.01553 ; perimeter
G1 X86.214 Y83.471 E0.15097 ; perimeter
G1 X86.218 Y80.806 E0.08358 ; perimeter
G1 X86.403 Y80.341 E0.01569 ; perimeter
G1 X86.456 Y80.076 E0.00847 ; perimeter
G1 X86.474 Y79.801 E0.00865 ; perimeter
G1 X86.439 Y79.437 E0.01147 ; perimeter
G1 X86.401 Y79.246 E0.00609 ; perimeter
G1 X86.312 Y78.982 E0.00874 ; perimeter
G1 X86.188 Y78.732 E0.00874 ; perimeter
G1 X86.033 Y78.501 E0.00874 ; perimeter
G1 X85.850 Y78.291 E0.00874 ; perimeter
G1 X85.642 Y78.109 E0.00864 ; perimeter
G1 X85.332 Y77.915 E0.01147 ; perimeter
G1 X85.158 Y77.829 E0.00609 ; perimeter
G1 X84.894 Y77.739 E0.00874 ; perimeter
G1 X84.621 Y77.685 E0.00874 ; perimeter
G1 X84.343 Y77.667 E0.00874 ; perimeter
G1 X84.064 Y77.685 E0.00874 ; perimeter
G1 X83.791 Y77.739 E0.00874 ; perimeter
G1 X83.527 Y77.829 E0.00874 ; perimeter
G1 X83.277 Y77.952 E0.00874 ; perimeter
G1 X83.045 Y78.107 E0.00874 ; perimeter
G1 X82.835 Y78.291 E0.00874 ; perimeter
G1 X82.652 Y78.501 E0.00874 ; perimeter
G1 X82.497 Y78.732 E0.00874 ; perimeter
G1 X82.373 Y78.982 E0.00874 ; perimeter
G1 X82.311 Y79.166 E0.00609 ; perimeter
G1 X82.229 Y79.523 E0.01147 ; perimeter
G1 X82.211 Y79.798 E0.00864 ; perimeter
G1 X82.229 Y80.076 E0.00874 ; perimeter
G1 X82.283 Y80.344 E0.00856 ; perimeter
G1 X82.467 Y80.805 E0.01558 ; perimeter
G1 X82.467 Y82.995 E0.06867 ; perimeter
G1 X82.410 Y84.377 E0.04337 ; perimeter
G1 X81.004 Y84.111 E0.04488 ; perimeter
G1 X80.673 Y83.765 E0.01500 ; perimeter
G1 X80.551 Y83.609 E0.00622 ; perimeter
G1 X79.711 Y83.450 E0.02678 ; perimeter
G1 X79.540 Y83.551 E0.00622 ; perimeter
G1 X79.106 Y83.752 E0.01500 ; perimeter
G1 X77.832 Y83.511 E0.04066 ; perimeter
G1 X77.882 Y82.886 E0.01965 ; perimeter
G1 X77.931 Y82.602 E0.00905 ; perimeter
G1 X77.979 Y81.847 E0.02369 ; perimeter
G1 X77.921 Y81.112 E0.02314 ; perimeter
G1 X77.749 Y80.387 E0.02336 ; perimeter
G1 X77.462 Y79.682 E0.02388 ; perimeter
G1 X77.064 Y79.006 E0.02459 ; perimeter
G1 X76.557 Y78.371 E0.02547 ; perimeter
G1 X75.894 Y77.750 E0.02847 ; perimeter
G1 X75.247 Y77.277 E0.02515 ; perimeter
G1 X74.463 Y76.839 E0.02815 ; perimeter
G1 X73.611 Y76.488 E0.02890 ; perimeter
G1 X72.704 Y76.230 E0.02957 ; perimeter
G1 X71.750 Y76.050 E0.03042 ; perimeter
G1 X71.513 Y76.025 E0.00750 ; perimeter
G1 X71.052 Y75.914 E0.01485 ; perimeter
G1 X70.595 Y75.873 F10800.000 ; move inwards before travel
G1 X70.617 Y75.900 ; move to first perimeter point
G1 F1800.000
G1 X70.098 Y76.025 E0.01673 ; perimeter
G1 X69.860 Y76.050 E0.00750 ; perimeter
G1 X68.907 Y76.230 E0.03042 ; perimeter
G1 X68.000 Y76.488 E0.02957 ; perimeter
G1 X67.148 Y76.839 E0.02890 ; perimeter
G1 X66.364 Y77.277 E0.02815 ; perimeter
G1 X65.717 Y77.750 E0.02515 ; perimeter
G1 X65.054 Y78.371 E0.02847 ; perimeter
G1 X64.547 Y79.006 E0.02547 ; perimeter
G1 X64.149 Y79.682 E0.02459 ; perimeter
G1 X63.862 Y80.387 E0.02388 ; perimeter
G1 X63.690 Y81.112 E0.02336 ; perimeter
G1 X63.632 Y81.847 E0.02314 ; perimeter
G1 X63.680 Y82.602 E0.02369 ; perimeter
G1 X63.729 Y82.886 E0.00905 ; perimeter
G1 X63.779 Y83.511 E0.01965 ; perimeter
G1 X62.505 Y83.752 E0.04066 ; perimeter
G1 X62.071 Y83.551 E0.01500 ; perimeter
G1 X61.900 Y83.450 E0.00622 ; perimeter
G1 X61.060 Y83.609 E0.02678 ; perimeter
G1 X60.938 Y83.765 E0.00622 ; perimeter
G1 X60.607 Y84.111 E0.01500 ; perimeter
G1 X59.201 Y84.377 E0.04488 ; perimeter
G1 X59.144 Y82.995 E0.04337 ; perimeter
G1 X59.144 Y80.805 E0.06867 ; perimeter
G1 X59.329 Y80.341 E0.01567 ; perimeter
G1 X59.382 Y80.076 E0.00847 ; perimeter
G1 X59.400 Y79.798 E0.00874 ; perimeter
G1 X59.382 Y79.520 E0.00874 ; perimeter
G1 X59.327 Y79.246 E0.00874 ; perimeter
G1 X59.237 Y78.982 E0.00874 ; perimeter
G1 X59.114 Y78.732 E0.00874 ; perimeter
G1 X58.959 Y78.501 E0.00874 ; perimeter
G1 X58.776 Y78.291 E0.00874 ; perimeter
G1 X58.566 Y78.107 E0.00874 ; perimeter
G1 X58.334 Y77.952 E0.00874 ; perimeter
G1 X58.084 Y77.829 E0.00874 ; perimeter
G1 X57.820 Y77.739 E0.00874 ; perimeter
G1 X57.547 Y77.685 E0.00874 ; perimeter
G1 X57.268 Y77.667 E0.00874 ; perimeter
G1 X56.990 Y77.685 E0.00874 ; perimeter
G1 X56.717 Y77.739 E0.00874 ; perimeter
G1 X56.453 Y77.829 E0.00874 ; perimeter
G1 X56.203 Y77.952 E0.00874 ; perimeter
G1 X55.971 Y78.107 E0.00874 ; perimeter
G1 X55.761 Y78.291 E0.00874 ; perimeter
G1 X55.578 Y78.501 E0.00874 ; perimeter
G1 X55.470 Y78.662 E0.00609 ; perimeter
G1 X55.298 Y78.985 E0.01147 ; perimeter
G1 X55.210 Y79.246 E0.00864 ; perimeter
G1 X55.155 Y79.520 E0.00874 ; perimeter
G1 X55.137 Y79.798 E0.00874 ; perimeter
G1 X55.155 Y80.076 E0.00874 ; perimeter
G1 X55.209 Y80.344 E0.00857 ; perimeter
G1 X55.393 Y80.805 E0.01557 ; perimeter
G1 X55.397 Y83.472 E0.08361 ; perimeter
G1 X55.731 Y88.275 E0.15095 ; perimeter
G1 X55.739 Y88.770 E0.01553 ; perimeter
G1 X55.707 Y89.573 E0.02520 ; perimeter
G1 X54.713 Y89.573 E0.03116 ; perimeter
G1 X54.325 Y89.294 E0.01500 ; perimeter
G1 X54.175 Y89.164 E0.00623 ; perimeter
G1 X53.711 Y89.164 E0.01454 ; perimeter
G1 X53.561 Y89.294 E0.00623 ; perimeter
G1 X53.173 Y89.573 E0.01500 ; perimeter
G1 X52.124 Y89.573 E0.03288 ; perimeter
G1 X52.013 Y88.897 E0.02148 ; perimeter
G1 X51.957 Y88.097 E0.02514 ; perimeter
G1 X51.944 Y87.680 E0.01308 ; perimeter
G1 X51.979 Y87.119 E0.01763 ; perimeter
G1 X49.633 Y87.155 E0.07358 ; perimeter
G1 X49.660 Y87.714 E0.01754 ; perimeter
G1 X49.542 Y88.123 E0.01334 ; perimeter
G1 X48.433 Y88.123 E0.03475 ; perimeter
G1 X48.045 Y87.844 E0.01500 ; perimeter
G1 X47.895 Y87.714 E0.00623 ; perimeter
G1 X47.331 Y87.714 E0.01767 ; perimeter
G1 X47.181 Y87.844 E0.00623 ; perimeter
G1 X46.792 Y88.123 E0.01500 ; perimeter
G1 X45.827 Y88.123 E0.03028 ; perimeter
G1 X45.730 Y87.563 E0.01781 ; perimeter
G1 X45.692 Y86.356 E0.03788 ; perimeter
G1 X46.198 Y86.241 E0.01626 ; perimeter
G1 X46.691 Y86.051 E0.01657 ; perimeter
G1 X47.151 Y85.791 E0.01656 ; perimeter
G1 X47.567 Y85.466 E0.01656 ; perimeter
G1 X47.931 Y85.084 E0.01656 ; perimeter
G1 X48.235 Y84.652 E0.01656 ; perimeter
G1 X48.473 Y84.180 E0.01656 ; perimeter
G1 X48.639 Y83.679 E0.01656 ; perimeter
G1 X48.729 Y83.159 E0.01656 ; perimeter
G1 X48.742 Y82.631 E0.01656 ; perimeter
G1 X48.678 Y82.107 E0.01656 ; perimeter
G1 X48.537 Y81.598 E0.01656 ; perimeter
G1 X48.324 Y81.117 E0.01649 ; perimeter
G1 X48.039 Y80.685 E0.01625 ; perimeter
G1 X47.867 Y80.678 E0.00539 ; perimeter
G1 X47.125 Y81.419 E0.03288 ; perimeter
G1 X47.387 Y81.884 E0.01670 ; perimeter
G1 X47.524 Y82.336 E0.01482 ; perimeter
G1 X47.570 Y82.807 E0.01483 ; perimeter
G1 X47.523 Y83.277 E0.01483 ; perimeter
G1 X47.386 Y83.730 E0.01483 ; perimeter
G1 X47.163 Y84.147 E0.01483 ; perimeter
G1 X46.863 Y84.512 E0.01482 ; perimeter
G1 X46.497 Y84.812 E0.01482 ; perimeter
G1 X46.080 Y85.035 E0.01483 ; perimeter
G1 X45.623 Y85.173 E0.01499 ; perimeter
G1 X45.164 Y85.207 E0.01442 ; perimeter
G1 X44.686 Y85.181 E0.01499 ; perimeter
G1 X44.232 Y85.033 E0.01499 ; perimeter
G1 X43.817 Y84.811 E0.01476 ; perimeter
G1 X43.452 Y84.511 E0.01483 ; perimeter
G1 X43.152 Y84.145 E0.01482 ; perimeter
G1 X42.929 Y83.728 E0.01483 ; perimeter
G1 X42.792 Y83.275 E0.01483 ; perimeter
G1 X42.746 Y82.805 E0.01482 ; perimeter
G1 X42.792 Y82.334 E0.01483 ; perimeter
G1 X42.930 Y81.882 E0.01483 ; perimeter
G1 X43.191 Y81.418 E0.01670 ; perimeter
G1 X42.450 Y80.676 E0.03288 ; perimeter
G1 X42.278 Y80.683 E0.00539 ; perimeter
G1 X41.993 Y81.115 E0.01624 ; perimeter
G1 X41.777 Y81.602 E0.01672 ; perimeter
G1 X41.638 Y82.104 E0.01633 ; perimeter
G1 X41.573 Y82.628 E0.01656 ; perimeter
G1 X41.586 Y83.156 E0.01656 ; perimeter
G1 X41.676 Y83.676 E0.01656 ; perimeter
G1 X41.842 Y84.178 E0.01656 ; perimeter
G1 X42.079 Y84.650 E0.01656 ; perimeter
G1 X42.383 Y85.082 E0.01656 ; perimeter
G1 X42.747 Y85.464 E0.01656 ; perimeter
G1 X43.163 Y85.789 E0.01656 ; perimeter
G1 X43.622 Y86.050 E0.01656 ; perimeter
G1 X44.115 Y86.240 E0.01657 ; perimeter
G1 X44.622 Y86.355 E0.01629 ; perimeter
G1 X44.583 Y87.539 E0.03713 ; perimeter
G1 X44.487 Y88.123 E0.01855 ; perimeter
G1 X42.993 Y88.123 E0.04683 ; perimeter
G1 X42.605 Y87.844 E0.01500 ; perimeter
G1 X42.455 Y87.714 E0.00623 ; perimeter
G1 X35.263 Y87.722 E0.22548 ; perimeter
G1 X35.263 Y78.305 E0.29526 ; perimeter
G1 X51.187 Y78.305 E0.49927 ; perimeter
G1 X52.541 Y76.951 E0.06004 ; perimeter
G1 X52.541 Y71.805 E0.16135 ; perimeter
G1 X70.216 Y71.805 E0.55420 ; perimeter
G1 X70.208 Y73.970 E0.06789 ; perimeter
G1 X70.338 Y74.119 E0.00622 ; perimeter
G1 X70.617 Y74.508 E0.01500 ; perimeter
G1 X70.617 Y75.840 E0.04175 ; perimeter
G1 X70.700 Y76.291 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.098 Y76.025 E-0.14530 ; wipe and retract
G1 X69.860 Y76.050 E-0.06313 ; wipe and retract
G1 X68.907 Y76.230 E-0.25602 ; wipe and retract
G1 X68.000 Y76.488 E-0.24887 ; wipe and retract
G1 X67.148 Y76.839 E-0.24322 ; wipe and retract
G1 X66.364 Y77.277 E-0.23691 ; wipe and retract
G1 X65.717 Y77.750 E-0.21166 ; wipe and retract
G1 X65.054 Y78.371 E-0.23959 ; wipe and retract
G1 X64.547 Y79.006 E-0.21433 ; wipe and retract
G1 X64.149 Y79.682 E-0.20700 ; wipe and retract
G1 X63.862 Y80.387 E-0.20094 ; wipe and retract
G1 X63.851 Y80.435 E-0.01303 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X92.043 Y88.500 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X93.178 Y88.500 E0.03557 ; perimeter
G1 X93.566 Y88.779 E0.01500 ; perimeter
G1 X93.716 Y88.909 E0.00623 ; perimeter
G1 X94.280 Y88.909 E0.01767 ; perimeter
G1 X94.430 Y88.779 E0.00623 ; perimeter
G1 X94.819 Y88.500 E0.01500 ; perimeter
G1 X95.794 Y88.500 E0.03059 ; perimeter
G1 X95.876 Y89.195 E0.02194 ; perimeter
G1 X97.033 Y89.194 E0.03628 ; perimeter
G1 X97.116 Y88.500 E0.02191 ; perimeter
G1 X98.618 Y88.500 E0.04708 ; perimeter
G1 X99.006 Y88.779 E0.01500 ; perimeter
G1 X99.156 Y88.909 E0.00623 ; perimeter
G1 X106.348 Y88.901 E0.22548 ; perimeter
G1 X106.348 Y92.962 E0.12731 ; perimeter
G1 X99.356 Y92.954 E0.21921 ; perimeter
G1 X99.206 Y93.084 E0.00623 ; perimeter
G1 X98.817 Y93.363 E0.01500 ; perimeter
G1 X97.611 Y93.363 E0.03782 ; perimeter
G1 X97.524 Y92.583 E0.02462 ; perimeter
G1 X97.505 Y92.166 E0.01307 ; perimeter
G1 X95.340 Y92.167 E0.06787 ; perimeter
G1 X95.314 Y92.961 E0.02491 ; perimeter
G1 X95.214 Y93.503 E0.01731 ; perimeter
G1 X94.196 Y93.503 E0.03193 ; perimeter
G1 X93.807 Y93.225 E0.01500 ; perimeter
G1 X93.658 Y93.094 E0.00622 ; perimeter
G1 X92.893 Y93.094 E0.02396 ; perimeter
G1 X92.744 Y93.225 E0.00622 ; perimeter
G1 X92.355 Y93.503 E0.01500 ; perimeter
G1 X91.370 Y93.504 E0.03088 ; perimeter
G1 X91.272 Y92.786 E0.02271 ; perimeter
G1 X91.238 Y92.343 E0.01392 ; perimeter
G1 X91.212 Y90.846 E0.04696 ; perimeter
G1 X91.922 Y90.283 E0.02842 ; perimeter
G1 X91.926 Y89.640 E0.02015 ; perimeter
G1 X91.954 Y89.210 E0.01352 ; perimeter
G1 X92.036 Y88.559 E0.02054 ; perimeter
G1 X92.057 Y88.100 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X93.178 Y88.500 E-0.30177 ; wipe and retract
G1 X93.566 Y88.779 E-0.12624 ; wipe and retract
G1 X93.716 Y88.909 E-0.05247 ; wipe and retract
G1 X94.280 Y88.909 E-0.14870 ; wipe and retract
G1 X94.430 Y88.779 E-0.05247 ; wipe and retract
G1 X94.819 Y88.500 E-0.12624 ; wipe and retract
G1 X95.794 Y88.500 E-0.25747 ; wipe and retract
G1 X95.876 Y89.195 E-0.18465 ; wipe and retract
G1 X97.033 Y89.194 E-0.30537 ; wipe and retract
G1 X97.116 Y88.500 E-0.18439 ; wipe and retract
G1 X98.618 Y88.500 E-0.39628 ; wipe and retract
G1 X99.006 Y88.779 E-0.12624 ; wipe and retract
G1 X99.057 Y88.823 E-0.01770 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X90.160 Y90.729 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X90.282 Y90.835 E0.00507 ; perimeter
G1 X90.090 Y95.491 E0.14612 ; perimeter
G1 X89.382 Y97.285 E0.06046 ; perimeter
G1 X89.285 Y100.561 E0.10277 ; perimeter
G1 X91.934 Y100.597 E0.08308 ; perimeter
G1 X91.930 Y97.321 E0.10270 ; perimeter
G1 X91.273 Y95.504 E0.06060 ; perimeter
G1 X91.295 Y94.593 E0.02855 ; perimeter
G1 X91.376 Y93.881 E0.02250 ; perimeter
G1 X92.355 Y93.881 E0.03069 ; perimeter
G1 X92.744 Y94.159 E0.01500 ; perimeter
G1 X92.893 Y94.290 E0.00622 ; perimeter
G1 X93.658 Y94.290 E0.02396 ; perimeter
G1 X93.807 Y94.159 E0.00622 ; perimeter
G1 X94.196 Y93.881 E0.01500 ; perimeter
G1 X95.227 Y93.881 E0.03231 ; perimeter
G1 X95.314 Y94.644 E0.02409 ; perimeter
G1 X95.331 Y94.943 E0.00941 ; perimeter
G1 X97.500 Y94.942 E0.06802 ; perimeter
G1 X97.525 Y94.275 E0.02095 ; perimeter
G1 X97.625 Y93.740 E0.01705 ; perimeter
G1 X98.817 Y93.740 E0.03739 ; perimeter
G1 X99.206 Y94.019 E0.01500 ; perimeter
G1 X99.356 Y94.149 E0.00623 ; perimeter
G1 X106.348 Y94.141 E0.21921 ; perimeter
G1 X106.347 Y111.282 E0.53743 ; perimeter
G1 X106.314 Y112.277 E0.03123 ; perimeter
G1 X106.227 Y113.066 E0.02487 ; perimeter
G1 X104.111 Y113.066 E0.06635 ; perimeter
G1 X104.023 Y112.305 E0.02402 ; perimeter
G1 X103.995 Y111.825 E0.01506 ; perimeter
G1 X103.989 Y109.025 E0.08781 ; perimeter
G1 X103.924 Y107.857 E0.03667 ; perimeter
G1 X103.845 Y107.292 E0.01789 ; perimeter
G1 X103.733 Y106.726 E0.01807 ; perimeter
G1 X103.590 Y106.168 E0.01807 ; perimeter
G1 X103.416 Y105.618 E0.01807 ; perimeter
G1 X103.212 Y105.079 E0.01807 ; perimeter
G1 X102.978 Y104.553 E0.01807 ; perimeter
G1 X102.716 Y104.040 E0.01807 ; perimeter
G1 X102.233 Y103.252 E0.02895 ; perimeter
G1 X101.856 Y102.843 E0.01744 ; perimeter
G1 X101.385 Y102.580 E0.01691 ; perimeter
G1 X101.017 Y102.495 E0.01187 ; perimeter
G1 X100.782 Y102.495 E0.00736 ; perimeter
G1 X100.413 Y102.580 E0.01187 ; perimeter
G1 X99.942 Y102.843 E0.01691 ; perimeter
G1 X99.566 Y103.252 E0.01744 ; perimeter
G1 X99.083 Y104.040 E0.02895 ; perimeter
G1 X98.820 Y104.553 E0.01807 ; perimeter
G1 X98.586 Y105.079 E0.01807 ; perimeter
G1 X98.382 Y105.618 E0.01807 ; perimeter
G1 X98.208 Y106.168 E0.01807 ; perimeter
G1 X98.065 Y106.726 E0.01807 ; perimeter
G1 X97.954 Y107.292 E0.01807 ; perimeter
G1 X97.874 Y107.857 E0.01789 ; perimeter
G1 X97.809 Y109.025 E0.03667 ; perimeter
G1 X97.804 Y112.818 E0.11893 ; perimeter
G1 X97.776 Y113.304 E0.01528 ; perimeter
G1 X97.688 Y114.073 E0.02425 ; perimeter
G1 X96.551 Y114.073 E0.03564 ; perimeter
G1 X96.163 Y113.794 E0.01500 ; perimeter
G1 X96.013 Y113.664 E0.00622 ; perimeter
G1 X95.259 Y113.664 E0.02365 ; perimeter
G1 X95.109 Y113.794 E0.00622 ; perimeter
G1 X94.721 Y114.073 E0.01500 ; perimeter
G1 X93.689 Y114.073 E0.03236 ; perimeter
G1 X93.628 Y113.286 E0.02472 ; perimeter
G1 X93.618 Y112.794 E0.01544 ; perimeter
G1 X93.753 Y109.505 E0.10322 ; perimeter
G1 X94.766 Y106.073 E0.11219 ; perimeter
G1 X94.540 Y103.935 E0.06740 ; perimeter
G1 X90.726 Y103.935 E0.11957 ; perimeter
G1 X90.500 Y106.073 E0.06740 ; perimeter
G1 X91.514 Y109.508 E0.11229 ; perimeter
G1 X91.525 Y110.581 E0.03366 ; perimeter
G1 X91.453 Y111.205 E0.01969 ; perimeter
G1 X90.335 Y111.205 E0.03507 ; perimeter
G1 X89.946 Y110.927 E0.01500 ; perimeter
G1 X89.796 Y110.796 E0.00622 ; perimeter
G1 X88.032 Y110.796 E0.05531 ; perimeter
G1 X87.883 Y110.927 E0.00622 ; perimeter
G1 X87.494 Y111.205 E0.01498 ; perimeter
G1 X86.244 Y111.211 E0.03920 ; perimeter
G1 X86.065 Y110.545 E0.02162 ; perimeter
G1 X85.977 Y110.118 E0.01369 ; perimeter
G1 X85.794 Y108.991 E0.03577 ; perimeter
G1 X85.716 Y108.760 E0.00765 ; perimeter
G1 X85.606 Y108.538 E0.00776 ; perimeter
G1 X85.469 Y108.332 E0.00777 ; perimeter
G1 X85.305 Y108.146 E0.00776 ; perimeter
G1 X85.119 Y107.983 E0.00777 ; perimeter
G1 X84.915 Y107.847 E0.00770 ; perimeter
G1 X84.645 Y107.720 E0.00935 ; perimeter
G1 X84.457 Y107.656 E0.00624 ; perimeter
G1 X84.214 Y107.608 E0.00777 ; perimeter
G1 X83.966 Y107.591 E0.00777 ; perimeter
G1 X83.719 Y107.608 E0.00777 ; perimeter
G1 X83.476 Y107.656 E0.00777 ; perimeter
G1 X83.241 Y107.736 E0.00777 ; perimeter
G1 X83.019 Y107.845 E0.00777 ; perimeter
G1 X82.813 Y107.983 E0.00777 ; perimeter
G1 X82.627 Y108.146 E0.00777 ; perimeter
G1 X82.463 Y108.333 E0.00777 ; perimeter
G1 X82.325 Y108.539 E0.00779 ; perimeter
G1 X82.214 Y108.763 E0.00782 ; perimeter
G1 X82.130 Y109.004 E0.00801 ; perimeter
G1 X82.002 Y109.575 E0.01834 ; perimeter
G1 X81.818 Y110.173 E0.01964 ; perimeter
G1 X80.736 Y109.857 E0.03532 ; perimeter
G1 X80.441 Y109.480 E0.01500 ; perimeter
G1 X80.334 Y109.313 E0.00623 ; perimeter
G1 X78.363 Y108.737 E0.06439 ; perimeter
G1 X78.183 Y108.820 E0.00623 ; perimeter
G1 X77.731 Y108.978 E0.01500 ; perimeter
G1 X76.958 Y108.752 E0.02525 ; perimeter
G1 X76.456 Y108.631 E0.01621 ; perimeter
G1 X75.601 Y108.667 E0.02681 ; perimeter
G1 X71.079 Y108.666 E0.14178 ; perimeter
G1 X71.080 Y106.896 E0.05551 ; perimeter
G1 X71.101 Y106.288 E0.01906 ; perimeter
G1 X70.994 Y106.264 E0.00344 ; perimeter
G1 X70.994 Y105.158 E0.03468 ; perimeter
G1 X71.273 Y104.769 E0.01500 ; perimeter
G1 X71.403 Y104.619 E0.00623 ; perimeter
G1 X71.403 Y102.526 E0.06564 ; perimeter
G1 X71.273 Y102.376 E0.00623 ; perimeter
G1 X70.994 Y101.987 E0.01500 ; perimeter
G1 X70.994 Y100.832 E0.03623 ; perimeter
G1 X71.742 Y100.743 E0.02363 ; perimeter
G1 X72.210 Y100.715 E0.01468 ; perimeter
G1 X73.567 Y100.710 E0.04257 ; perimeter
G1 X75.792 Y100.572 E0.06989 ; perimeter
G1 X76.409 Y100.608 E0.01935 ; perimeter
G1 X76.974 Y100.566 E0.01777 ; perimeter
G1 X77.528 Y100.443 E0.01779 ; perimeter
G1 X78.064 Y100.241 E0.01796 ; perimeter
G1 X78.573 Y99.962 E0.01820 ; perimeter
G1 X79.047 Y99.610 E0.01850 ; perimeter
G1 X79.477 Y99.191 E0.01882 ; perimeter
G1 X79.855 Y98.712 E0.01915 ; perimeter
G1 X80.175 Y98.180 E0.01946 ; perimeter
G1 X80.430 Y97.605 E0.01974 ; perimeter
G1 X80.616 Y96.996 E0.01996 ; perimeter
G1 X80.729 Y96.364 E0.02011 ; perimeter
G1 X80.767 Y95.721 E0.02019 ; perimeter
G1 X80.729 Y95.078 E0.02019 ; perimeter
G1 X80.616 Y94.447 E0.02011 ; perimeter
G1 X80.430 Y93.838 E0.01996 ; perimeter
G1 X80.175 Y93.262 E0.01976 ; perimeter
G1 X79.851 Y92.719 E0.01983 ; perimeter
G1 X79.140 Y91.712 E0.03863 ; perimeter
G1 X79.978 Y91.389 E0.02817 ; perimeter
G1 X80.441 Y91.509 E0.01500 ; perimeter
G1 X80.628 Y91.577 E0.00622 ; perimeter
G1 X81.350 Y91.298 E0.02427 ; perimeter
G1 X81.443 Y91.123 E0.00622 ; perimeter
G1 X81.705 Y90.723 E0.01500 ; perimeter
G1 X82.805 Y90.298 E0.03698 ; perimeter
G1 X82.955 Y90.790 E0.01613 ; perimeter
G1 X83.036 Y91.473 E0.02156 ; perimeter
G1 X85.644 Y91.473 E0.08179 ; perimeter
G1 X85.677 Y91.041 E0.01359 ; perimeter
G1 X85.779 Y90.315 E0.02300 ; perimeter
G1 X85.892 Y89.948 E0.01202 ; perimeter
G1 X86.898 Y89.950 E0.03154 ; perimeter
G1 X87.286 Y90.229 E0.01499 ; perimeter
G1 X87.436 Y90.359 E0.00623 ; perimeter
G1 X87.900 Y90.359 E0.01454 ; perimeter
G1 X88.050 Y90.229 E0.00623 ; perimeter
G1 X88.439 Y89.950 E0.01500 ; perimeter
G1 X89.460 Y89.950 E0.03201 ; perimeter
G1 X89.510 Y90.222 E0.00867 ; perimeter
G1 X90.114 Y90.690 E0.02397 ; perimeter
G1 X90.315 Y90.682 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X90.282 Y90.835 E-0.05853 ; wipe and retract
G1 X90.090 Y95.491 E-1.22976 ; wipe and retract
G1 X89.382 Y97.285 E-0.50888 ; wipe and retract
G1 X89.328 Y99.114 E-0.48282 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X82.843 Y89.912 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X82.296 Y90.091 E0.01803 ; perimeter
G1 X81.569 Y90.371 E0.02441 ; perimeter
G1 X81.106 Y90.251 E0.01500 ; perimeter
G1 X80.920 Y90.183 E0.00622 ; perimeter
G1 X80.198 Y90.462 E0.02427 ; perimeter
G1 X80.105 Y90.637 E0.00622 ; perimeter
G1 X79.843 Y91.037 E0.01498 ; perimeter
G1 X79.321 Y91.241 E0.01759 ; perimeter
G1 X78.757 Y91.527 E0.01981 ; perimeter
G1 X78.077 Y91.201 E0.02364 ; perimeter
G1 X77.529 Y90.999 E0.01831 ; perimeter
G1 X76.974 Y90.877 E0.01783 ; perimeter
G1 X76.408 Y90.834 E0.01777 ; perimeter
G1 X75.802 Y90.869 E0.01904 ; perimeter
G1 X72.297 Y90.872 E0.10991 ; perimeter
G1 X71.787 Y90.846 E0.01600 ; perimeter
G1 X70.994 Y90.760 E0.02501 ; perimeter
G1 X70.994 Y87.734 E0.09487 ; perimeter
G1 X72.711 Y87.421 E0.05473 ; perimeter
G1 X73.617 Y87.170 E0.02948 ; perimeter
G1 X74.469 Y86.825 E0.02879 ; perimeter
G1 X75.251 Y86.395 E0.02801 ; perimeter
G1 X75.955 Y85.886 E0.02721 ; perimeter
G1 X76.561 Y85.314 E0.02613 ; perimeter
G1 X77.072 Y84.680 E0.02554 ; perimeter
G1 X77.371 Y84.226 E0.01706 ; perimeter
G1 X77.685 Y83.858 E0.01515 ; perimeter
G1 X79.037 Y84.123 E0.04319 ; perimeter
G1 X79.366 Y84.469 E0.01498 ; perimeter
G1 X79.489 Y84.625 E0.00622 ; perimeter
G1 X80.328 Y84.783 E0.02678 ; perimeter
G1 X80.499 Y84.683 E0.00622 ; perimeter
G1 X80.933 Y84.482 E0.01500 ; perimeter
G1 X81.853 Y84.656 E0.02934 ; perimeter
G1 X82.509 Y84.751 E0.02078 ; perimeter
G1 X82.617 Y85.444 E0.02200 ; perimeter
G1 X82.695 Y86.333 E0.02796 ; perimeter
G1 X82.853 Y88.879 E0.08000 ; perimeter
G1 X82.843 Y89.852 E0.03051 ; perimeter
G1 X82.931 Y90.302 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X82.296 Y90.091 E-0.15754 ; wipe and retract
G1 X81.569 Y90.371 E-0.20546 ; wipe and retract
G1 X81.106 Y90.251 E-0.12625 ; wipe and retract
G1 X80.920 Y90.183 E-0.05236 ; wipe and retract
G1 X80.198 Y90.462 E-0.20426 ; wipe and retract
G1 X80.105 Y90.637 E-0.05237 ; wipe and retract
G1 X79.843 Y91.037 E-0.12610 ; wipe and retract
G1 X79.321 Y91.241 E-0.14802 ; wipe and retract
G1 X78.757 Y91.527 E-0.16672 ; wipe and retract
G1 X78.077 Y91.201 E-0.19895 ; wipe and retract
G1 X77.529 Y90.999 E-0.15411 ; wipe and retract
G1 X76.974 Y90.877 E-0.15007 ; wipe and retract
G1 X76.408 Y90.834 E-0.14960 ; wipe and retract
G1 X75.802 Y90.869 E-0.16027 ; wipe and retract
G1 X74.938 Y90.870 E-0.22791 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X71.396 Y100.207 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X71.396 Y94.715 E0.17219 ; perimeter
G1 X73.011 Y94.723 E0.05063 ; perimeter
G1 X73.799 Y94.754 E0.02473 ; perimeter
G1 X73.721 Y96.126 E0.04309 ; perimeter
G1 X73.810 Y97.619 E0.04691 ; perimeter
G1 X73.815 Y98.718 E0.03444 ; perimeter
G1 X75.131 Y98.727 E0.04126 ; perimeter
G1 X76.405 Y98.811 E0.04002 ; perimeter
G1 X76.936 Y98.760 E0.01674 ; perimeter
G1 X77.441 Y98.607 E0.01653 ; perimeter
G1 X77.906 Y98.358 E0.01654 ; perimeter
G1 X78.314 Y98.024 E0.01654 ; perimeter
G1 X78.648 Y97.616 E0.01654 ; perimeter
G1 X78.897 Y97.151 E0.01654 ; perimeter
G1 X79.050 Y96.646 E0.01655 ; perimeter
G1 X79.102 Y96.122 E0.01651 ; perimeter
G1 X79.050 Y95.596 E0.01655 ; perimeter
G1 X78.897 Y95.091 E0.01655 ; perimeter
G1 X78.649 Y94.627 E0.01651 ; perimeter
G1 X78.314 Y94.219 E0.01655 ; perimeter
G1 X77.906 Y93.884 E0.01655 ; perimeter
G1 X77.441 Y93.636 E0.01651 ; perimeter
G1 X76.936 Y93.482 E0.01655 ; perimeter
G1 X76.405 Y93.431 E0.01675 ; perimeter
G1 X75.017 Y93.518 E0.04359 ; perimeter
G1 X73.357 Y93.527 E0.05206 ; perimeter
G1 X72.210 Y91.247 E0.08002 ; perimeter
G1 X76.425 Y91.238 E0.13215 ; perimeter
G1 X76.916 Y91.272 E0.01545 ; perimeter
G1 X77.415 Y91.382 E0.01601 ; perimeter
G1 X77.898 Y91.564 E0.01620 ; perimeter
G1 X78.359 Y91.817 E0.01648 ; perimeter
G1 X78.790 Y92.136 E0.01681 ; perimeter
G1 X79.182 Y92.519 E0.01718 ; perimeter
G1 X79.529 Y92.958 E0.01755 ; perimeter
G1 X79.823 Y93.447 E0.01790 ; perimeter
G1 X80.059 Y93.978 E0.01821 ; perimeter
G1 X80.231 Y94.541 E0.01845 ; perimeter
G1 X80.335 Y95.125 E0.01862 ; perimeter
G1 X80.371 Y95.721 E0.01871 ; perimeter
G1 X80.335 Y96.317 E0.01871 ; perimeter
G1 X80.231 Y96.902 E0.01862 ; perimeter
G1 X80.059 Y97.465 E0.01845 ; perimeter
G1 X79.823 Y97.995 E0.01821 ; perimeter
G1 X79.529 Y98.485 E0.01790 ; perimeter
G1 X79.182 Y98.924 E0.01755 ; perimeter
G1 X78.790 Y99.306 E0.01718 ; perimeter
G1 X78.359 Y99.626 E0.01681 ; perimeter
G1 X77.898 Y99.878 E0.01648 ; perimeter
G1 X77.415 Y100.061 E0.01620 ; perimeter
G1 X76.916 Y100.171 E0.01601 ; perimeter
G1 X76.426 Y100.205 E0.01542 ; perimeter
G1 X71.456 Y100.207 E0.15581 ; perimeter
G1 X70.996 Y100.208 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X71.396 Y94.715 E-1.44926 ; wipe and retract
G1 X73.011 Y94.723 E-0.42609 ; wipe and retract
G1 X73.799 Y94.754 E-0.20812 ; wipe and retract
G1 X73.757 Y95.497 E-0.19654 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X74.409 Y97.450 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X74.208 Y97.016 E0.01501 ; perimeter
G1 X74.119 Y96.561 E0.01452 ; perimeter
G1 X74.097 Y96.121 E0.01381 ; perimeter
G1 X74.119 Y95.681 E0.01381 ; perimeter
G1 X74.208 Y95.227 E0.01452 ; perimeter
G1 X74.409 Y94.792 E0.01501 ; perimeter
G1 X74.708 Y94.418 E0.01503 ; perimeter
G1 X75.083 Y94.119 E0.01503 ; perimeter
G1 X75.517 Y93.918 E0.01501 ; perimeter
G1 X75.972 Y93.829 E0.01454 ; perimeter
G1 X76.400 Y93.810 E0.01343 ; perimeter
G1 X76.862 Y93.853 E0.01454 ; perimeter
G1 X77.296 Y93.984 E0.01424 ; perimeter
G1 X77.696 Y94.198 E0.01422 ; perimeter
G1 X78.047 Y94.486 E0.01422 ; perimeter
G1 X78.334 Y94.836 E0.01422 ; perimeter
G1 X78.548 Y95.236 E0.01422 ; perimeter
G1 X78.680 Y95.670 E0.01422 ; perimeter
G1 X78.724 Y96.121 E0.01422 ; perimeter
G1 X78.680 Y96.573 E0.01422 ; perimeter
G1 X78.548 Y97.006 E0.01422 ; perimeter
G1 X78.334 Y97.406 E0.01422 ; perimeter
G1 X78.047 Y97.757 E0.01422 ; perimeter
G1 X77.696 Y98.044 E0.01422 ; perimeter
G1 X77.296 Y98.258 E0.01422 ; perimeter
G1 X76.862 Y98.390 E0.01422 ; perimeter
G1 X76.417 Y98.434 E0.01404 ; perimeter
G1 X75.972 Y98.413 E0.01396 ; perimeter
G1 X75.517 Y98.325 E0.01454 ; perimeter
G1 X75.083 Y98.124 E0.01501 ; perimeter
G1 X74.708 Y97.825 E0.01503 ; perimeter
G1 X74.446 Y97.497 E0.01315 ; perimeter
G1 X74.009 Y97.461 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.208 Y97.016 E-0.14175 ; wipe and retract
G1 X74.119 Y96.561 E-0.12221 ; wipe and retract
G1 X74.097 Y96.121 E-0.11624 ; wipe and retract
G1 X74.119 Y95.681 E-0.11624 ; wipe and retract
G1 X74.208 Y95.227 E-0.12221 ; wipe and retract
G1 X74.409 Y94.792 E-0.12631 ; wipe and retract
G1 X74.708 Y94.418 E-0.12648 ; wipe and retract
G1 X75.083 Y94.119 E-0.12649 ; wipe and retract
G1 X75.517 Y93.918 E-0.12631 ; wipe and retract
G1 X75.972 Y93.829 E-0.12239 ; wipe and retract
G1 X76.400 Y93.810 E-0.11306 ; wipe and retract
G1 X76.862 Y93.853 E-0.12238 ; wipe and retract
G1 X77.296 Y93.984 E-0.11982 ; wipe and retract
G1 X77.696 Y94.198 E-0.11965 ; wipe and retract
G1 X78.047 Y94.486 E-0.11966 ; wipe and retract
G1 X78.334 Y94.836 E-0.11965 ; wipe and retract
G1 X78.548 Y95.236 E-0.11965 ; wipe and retract
G1 X78.680 Y95.670 E-0.11965 ; wipe and retract
G1 X78.709 Y95.971 E-0.07984 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.134 Y119.853 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X80.460 Y120.018 E0.01143 ; perimeter
G1 X80.541 Y120.646 E0.01987 ; perimeter
G1 X80.569 Y121.108 E0.01451 ; perimeter
G1 X80.575 Y123.760 E0.08315 ; perimeter
G1 X80.673 Y124.189 E0.01380 ; perimeter
G1 X80.841 Y124.644 E0.01520 ; perimeter
G1 X80.914 Y124.792 E0.00518 ; perimeter
G1 X81.194 Y124.792 E0.00877 ; perimeter
G1 X81.193 Y122.819 E0.06185 ; perimeter
G1 X81.216 Y122.470 E0.01098 ; perimeter
G1 X81.287 Y122.112 E0.01144 ; perimeter
G1 X81.417 Y121.741 E0.01232 ; perimeter
G1 X81.564 Y121.442 E0.01045 ; perimeter
G1 X81.766 Y121.140 E0.01140 ; perimeter
G1 X82.006 Y120.866 E0.01140 ; perimeter
G1 X82.279 Y120.627 E0.01140 ; perimeter
G1 X82.582 Y120.424 E0.01140 ; perimeter
G1 X82.908 Y120.263 E0.01140 ; perimeter
G1 X83.252 Y120.146 E0.01140 ; perimeter
G1 X83.609 Y120.075 E0.01140 ; perimeter
G1 X83.971 Y120.051 E0.01139 ; perimeter
G1 X84.334 Y120.075 E0.01140 ; perimeter
G1 X84.691 Y120.146 E0.01140 ; perimeter
G1 X85.035 Y120.263 E0.01140 ; perimeter
G1 X85.361 Y120.423 E0.01140 ; perimeter
G1 X85.664 Y120.625 E0.01140 ; perimeter
G1 X85.937 Y120.865 E0.01140 ; perimeter
G1 X86.177 Y121.138 E0.01140 ; perimeter
G1 X86.363 Y121.415 E0.01046 ; perimeter
G1 X86.540 Y121.765 E0.01231 ; perimeter
G1 X86.658 Y122.111 E0.01144 ; perimeter
G1 X86.729 Y122.468 E0.01140 ; perimeter
G1 X86.752 Y122.819 E0.01103 ; perimeter
G1 X86.730 Y124.260 E0.04521 ; perimeter
G1 X86.662 Y125.174 E0.02873 ; perimeter
G1 X86.667 Y125.688 E0.01613 ; perimeter
G1 X86.387 Y126.078 E0.01503 ; perimeter
G1 X86.257 Y126.228 E0.00623 ; perimeter
G1 X86.257 Y128.862 E0.08257 ; perimeter
G1 X86.387 Y129.012 E0.00623 ; perimeter
G1 X86.666 Y129.400 E0.01500 ; perimeter
G1 X86.666 Y130.767 E0.04285 ; perimeter
G1 X85.891 Y130.854 E0.02445 ; perimeter
G1 X85.398 Y130.882 E0.01549 ; perimeter
G1 X81.899 Y130.875 E0.10972 ; perimeter
G1 X81.834 Y131.310 E0.01379 ; perimeter
G1 X81.237 Y131.356 E0.01878 ; perimeter
G1 X81.237 Y131.668 E0.00978 ; perimeter
G1 X81.834 Y131.714 E0.01878 ; perimeter
G1 X81.899 Y132.149 E0.01378 ; perimeter
G1 X84.146 Y132.138 E0.07047 ; perimeter
G1 X84.146 Y131.801 E0.01056 ; perimeter
G1 X85.462 Y131.808 E0.04127 ; perimeter
G1 X85.924 Y131.836 E0.01450 ; perimeter
G1 X86.666 Y131.924 E0.02344 ; perimeter
G1 X86.666 Y133.639 E0.05377 ; perimeter
G1 X86.387 Y134.028 E0.01500 ; perimeter
G1 X86.257 Y134.178 E0.00622 ; perimeter
G1 X86.265 Y138.195 E0.12597 ; perimeter
G1 X71.395 Y138.195 E0.46623 ; perimeter
G1 X71.403 Y132.196 E0.18811 ; perimeter
G1 X71.273 Y132.046 E0.00623 ; perimeter
G1 X70.994 Y131.657 E0.01500 ; perimeter
G1 X70.994 Y130.666 E0.03109 ; perimeter
G1 X72.667 Y130.385 E0.05318 ; perimeter
G1 X73.561 Y130.175 E0.02881 ; perimeter
G1 X74.401 Y129.890 E0.02782 ; perimeter
G1 X75.176 Y129.533 E0.02675 ; perimeter
G1 X75.872 Y129.112 E0.02550 ; perimeter
G1 X76.477 Y128.637 E0.02412 ; perimeter
G1 X76.981 Y128.117 E0.02271 ; perimeter
G1 X77.378 Y127.563 E0.02135 ; perimeter
G1 X77.662 Y126.986 E0.02017 ; perimeter
G1 X77.833 Y126.395 E0.01928 ; perimeter
G1 X77.889 Y125.798 E0.01881 ; perimeter
G1 X77.833 Y125.201 E0.01881 ; perimeter
G1 X77.662 Y124.610 E0.01928 ; perimeter
G1 X77.377 Y124.032 E0.02021 ; perimeter
G1 X76.975 Y123.457 E0.02199 ; perimeter
G1 X76.759 Y123.202 E0.01049 ; perimeter
G1 X76.344 Y122.637 E0.02198 ; perimeter
G1 X77.022 Y122.139 E0.02640 ; perimeter
G1 X77.501 Y122.133 E0.01500 ; perimeter
G1 X77.698 Y122.149 E0.00622 ; perimeter
G1 X78.985 Y121.198 E0.05017 ; perimeter
G1 X79.118 Y120.503 E0.02218 ; perimeter
G1 X79.741 Y120.140 E0.02261 ; perimeter
G1 X80.086 Y119.888 E0.01338 ; perimeter
G1 X80.354 Y119.562 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X80.460 Y120.018 E-0.10434 ; wipe and retract
G1 X80.541 Y120.646 E-0.16721 ; wipe and retract
G1 X80.569 Y121.108 E-0.12215 ; wipe and retract
G1 X80.575 Y123.760 E-0.69983 ; wipe and retract
G1 X80.673 Y124.189 E-0.11613 ; wipe and retract
G1 X80.841 Y124.644 E-0.12793 ; wipe and retract
G1 X80.914 Y124.792 E-0.04360 ; wipe and retract
G1 X81.194 Y124.792 E-0.07377 ; wipe and retract
G1 X81.193 Y122.819 E-0.52053 ; wipe and retract
G1 X81.216 Y122.470 E-0.09241 ; wipe and retract
G1 X81.287 Y122.112 E-0.09626 ; wipe and retract
G1 X81.417 Y121.741 E-0.10365 ; wipe and retract
G1 X81.438 Y121.700 E-0.01218 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X91.481 Y111.582 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X91.604 Y112.280 E0.02223 ; perimeter
G1 X91.647 Y112.744 E0.01462 ; perimeter
G1 X92.014 Y122.821 E0.31617 ; perimeter
G1 X93.315 Y122.837 E0.04079 ; perimeter
G1 X93.397 Y122.436 E0.01283 ; perimeter
G1 X94.639 Y122.436 E0.03897 ; perimeter
G1 X95.028 Y122.715 E0.01500 ; perimeter
G1 X95.178 Y122.845 E0.00622 ; perimeter
G1 X97.402 Y122.845 E0.06973 ; perimeter
G1 X97.551 Y122.715 E0.00622 ; perimeter
G1 X97.940 Y122.436 E0.01500 ; perimeter
G1 X99.635 Y122.436 E0.05314 ; perimeter
G1 X99.724 Y123.179 E0.02345 ; perimeter
G1 X99.752 Y123.641 E0.01452 ; perimeter
G1 X99.756 Y125.038 E0.04379 ; perimeter
G1 X100.899 Y125.037 E0.03582 ; perimeter
G1 X100.903 Y123.641 E0.04379 ; perimeter
G1 X100.931 Y123.179 E0.01452 ; perimeter
G1 X101.020 Y122.436 E0.02345 ; perimeter
G1 X102.716 Y122.436 E0.05316 ; perimeter
G1 X103.104 Y122.715 E0.01500 ; perimeter
G1 X103.254 Y122.845 E0.00622 ; perimeter
G1 X106.348 Y122.837 E0.09700 ; perimeter
G1 X106.348 Y134.684 E0.37144 ; perimeter
G1 X106.298 Y135.318 E0.01994 ; perimeter
G1 X106.173 Y135.837 E0.01674 ; perimeter
G1 X105.969 Y136.330 E0.01674 ; perimeter
G1 X105.690 Y136.785 E0.01674 ; perimeter
G1 X105.343 Y137.191 E0.01674 ; perimeter
G1 X104.937 Y137.538 E0.01674 ; perimeter
G1 X104.482 Y137.817 E0.01674 ; perimeter
G1 X103.989 Y138.021 E0.01674 ; perimeter
G1 X103.470 Y138.145 E0.01674 ; perimeter
G1 X102.836 Y138.195 E0.01994 ; perimeter
G1 X87.444 Y138.195 E0.48259 ; perimeter
G1 X87.452 Y134.178 E0.12597 ; perimeter
G1 X87.322 Y134.028 E0.00622 ; perimeter
G1 X87.043 Y133.639 E0.01500 ; perimeter
G1 X87.043 Y131.924 E0.05378 ; perimeter
G1 X87.794 Y131.836 E0.02371 ; perimeter
G1 X88.264 Y131.808 E0.01476 ; perimeter
G1 X89.597 Y131.801 E0.04180 ; perimeter
G1 X89.597 Y132.137 E0.01053 ; perimeter
G1 X91.846 Y132.145 E0.07051 ; perimeter
G1 X91.912 Y131.715 E0.01365 ; perimeter
G1 X92.507 Y131.668 E0.01872 ; perimeter
G1 X92.507 Y131.357 E0.00974 ; perimeter
G1 X91.912 Y131.310 E0.01872 ; perimeter
G1 X91.846 Y130.876 E0.01376 ; perimeter
G1 X88.318 Y130.883 E0.11062 ; perimeter
G1 X87.821 Y130.855 E0.01559 ; perimeter
G1 X87.043 Y130.767 E0.02456 ; perimeter
G1 X87.043 Y129.400 E0.04286 ; perimeter
G1 X87.322 Y129.012 E0.01500 ; perimeter
G1 X87.452 Y128.862 E0.00623 ; perimeter
G1 X87.452 Y126.228 E0.08257 ; perimeter
G1 X87.322 Y126.078 E0.00623 ; perimeter
G1 X87.044 Y125.690 E0.01496 ; perimeter
G1 X87.037 Y125.000 E0.02165 ; perimeter
G1 X87.274 Y124.203 E0.02608 ; perimeter
G1 X87.367 Y123.760 E0.01418 ; perimeter
G1 X87.364 Y120.118 E0.11418 ; perimeter
G1 X87.332 Y119.632 E0.01529 ; perimeter
G1 X86.376 Y112.907 E0.21297 ; perimeter
G1 X86.334 Y112.411 E0.01561 ; perimeter
G1 X86.306 Y111.582 E0.02599 ; perimeter
G1 X87.494 Y111.582 E0.03724 ; perimeter
G1 X87.883 Y111.861 E0.01500 ; perimeter
G1 X88.032 Y111.991 E0.00622 ; perimeter
G1 X89.796 Y111.991 E0.05531 ; perimeter
G1 X89.946 Y111.861 E0.00622 ; perimeter
G1 X90.335 Y111.582 E0.01500 ; perimeter
G1 X91.421 Y111.582 E0.03406 ; perimeter
G1 X91.875 Y111.511 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X91.604 Y112.280 E-0.19048 ; wipe and retract
G1 X91.647 Y112.744 E-0.12303 ; wipe and retract
G1 X91.918 Y120.191 E-1.96649 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X93.691 Y114.449 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X94.721 Y114.450 E0.03229 ; perimeter
G1 X95.109 Y114.728 E0.01500 ; perimeter
G1 X95.259 Y114.859 E0.00622 ; perimeter
G1 X96.013 Y114.859 E0.02365 ; perimeter
G1 X96.163 Y114.728 E0.00622 ; perimeter
G1 X96.551 Y114.450 E0.01500 ; perimeter
G1 X97.687 Y114.450 E0.03560 ; perimeter
G1 X97.776 Y115.188 E0.02333 ; perimeter
G1 X97.804 Y115.647 E0.01440 ; perimeter
G1 X97.809 Y117.834 E0.06858 ; perimeter
G1 X97.934 Y118.230 E0.01301 ; perimeter
G1 X98.035 Y118.427 E0.00693 ; perimeter
G1 X98.158 Y118.610 E0.00693 ; perimeter
G1 X98.302 Y118.779 E0.00693 ; perimeter
G1 X98.464 Y118.929 E0.00693 ; perimeter
G1 X98.642 Y119.060 E0.00693 ; perimeter
G1 X98.834 Y119.170 E0.00693 ; perimeter
G1 X99.238 Y119.316 E0.01347 ; perimeter
G1 X99.711 Y119.371 E0.01495 ; perimeter
G1 X102.087 Y119.371 E0.07449 ; perimeter
G1 X102.561 Y119.316 E0.01495 ; perimeter
G1 X102.965 Y119.170 E0.01347 ; perimeter
G1 X103.157 Y119.060 E0.00693 ; perimeter
G1 X103.335 Y118.929 E0.00693 ; perimeter
G1 X103.497 Y118.779 E0.00693 ; perimeter
G1 X103.640 Y118.610 E0.00693 ; perimeter
G1 X103.763 Y118.427 E0.00693 ; perimeter
G1 X103.864 Y118.230 E0.00693 ; perimeter
G1 X103.942 Y118.023 E0.00693 ; perimeter
G1 X103.989 Y117.834 E0.00610 ; perimeter
G1 X103.995 Y114.666 E0.09935 ; perimeter
G1 X104.023 Y114.195 E0.01480 ; perimeter
G1 X104.111 Y113.443 E0.02374 ; perimeter
G1 X106.227 Y113.443 E0.06635 ; perimeter
G1 X106.314 Y114.237 E0.02504 ; perimeter
G1 X106.342 Y114.747 E0.01604 ; perimeter
G1 X106.348 Y121.658 E0.21668 ; perimeter
G1 X103.254 Y121.650 E0.09700 ; perimeter
G1 X103.104 Y121.780 E0.00622 ; perimeter
G1 X102.716 Y122.059 E0.01500 ; perimeter
G1 X101.269 Y122.059 E0.04534 ; perimeter
G1 X101.023 Y122.018 E0.00784 ; perimeter
G1 X100.570 Y122.049 E0.01423 ; perimeter
G1 X100.085 Y122.049 E0.01519 ; perimeter
G1 X99.633 Y122.018 E0.01423 ; perimeter
G1 X99.386 Y122.059 E0.00784 ; perimeter
G1 X97.940 Y122.059 E0.04533 ; perimeter
G1 X97.551 Y121.780 E0.01500 ; perimeter
G1 X97.402 Y121.650 E0.00622 ; perimeter
G1 X95.178 Y121.650 E0.06973 ; perimeter
G1 X95.028 Y121.780 E0.00622 ; perimeter
G1 X94.639 Y122.059 E0.01500 ; perimeter
G1 X93.404 Y122.059 E0.03873 ; perimeter
G1 X93.337 Y121.280 E0.02453 ; perimeter
G1 X93.329 Y120.941 E0.01061 ; perimeter
G1 X93.405 Y118.472 E0.07745 ; perimeter
G1 X93.517 Y115.495 E0.09341 ; perimeter
G1 X93.572 Y114.918 E0.01820 ; perimeter
G1 X93.676 Y114.508 E0.01326 ; perimeter
G1 X93.713 Y114.050 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X94.721 Y114.450 E-0.27608 ; wipe and retract
G1 X95.109 Y114.728 E-0.12623 ; wipe and retract
G1 X95.259 Y114.859 E-0.05236 ; wipe and retract
G1 X96.013 Y114.859 E-0.19901 ; wipe and retract
G1 X96.163 Y114.728 E-0.05236 ; wipe and retract
G1 X96.551 Y114.450 E-0.12625 ; wipe and retract
G1 X97.687 Y114.450 E-0.29965 ; wipe and retract
G1 X97.776 Y115.188 E-0.19634 ; wipe and retract
G1 X97.804 Y115.647 E-0.12123 ; wipe and retract
G1 X97.809 Y117.834 E-0.57719 ; wipe and retract
G1 X97.934 Y118.230 E-0.10953 ; wipe and retract
G1 X98.035 Y118.427 E-0.05835 ; wipe and retract
G1 X98.158 Y118.610 E-0.05834 ; wipe and retract
G1 X98.225 Y118.688 E-0.02710 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X108.150 Y114.508 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X108.150 Y134.754 E0.63483 ; perimeter
G1 X108.084 Y135.600 E0.02661 ; perimeter
G1 X107.893 Y136.395 E0.02564 ; perimeter
G1 X107.580 Y137.151 E0.02564 ; perimeter
G1 X107.153 Y137.848 E0.02564 ; perimeter
G1 X106.622 Y138.470 E0.02564 ; perimeter
G1 X106.000 Y139.001 E0.02564 ; perimeter
G1 X105.303 Y139.428 E0.02564 ; perimeter
G1 X104.548 Y139.741 E0.02564 ; perimeter
G1 X103.753 Y139.932 E0.02564 ; perimeter
G1 X102.907 Y139.998 E0.02661 ; perimeter
G1 X38.704 Y139.998 E2.01302 ; perimeter
G1 X37.858 Y139.932 E0.02661 ; perimeter
G1 X37.063 Y139.741 E0.02564 ; perimeter
G1 X36.308 Y139.428 E0.02564 ; perimeter
G1 X35.611 Y139.001 E0.02564 ; perimeter
G1 X34.989 Y138.470 E0.02564 ; perimeter
G1 X34.458 Y137.848 E0.02564 ; perimeter
G1 X34.031 Y137.151 E0.02564 ; perimeter
G1 X33.718 Y136.395 E0.02564 ; perimeter
G1 X33.527 Y135.600 E0.02564 ; perimeter
G1 X33.461 Y134.754 E0.02661 ; perimeter
G1 X33.461 Y75.246 E1.86586 ; perimeter
G1 X33.527 Y74.400 E0.02661 ; perimeter
G1 X33.718 Y73.605 E0.02564 ; perimeter
G1 X34.031 Y72.849 E0.02564 ; perimeter
G1 X34.458 Y72.152 E0.02564 ; perimeter
G1 X34.989 Y71.530 E0.02564 ; perimeter
G1 X35.611 Y70.999 E0.02564 ; perimeter
G1 X36.308 Y70.572 E0.02563 ; perimeter
G1 X37.063 Y70.259 E0.02564 ; perimeter
G1 X37.858 Y70.068 E0.02564 ; perimeter
G1 X38.704 Y70.002 E0.02661 ; perimeter
G1 X102.958 Y70.006 E2.01462 ; perimeter
G1 X103.753 Y70.068 E0.02500 ; perimeter
G1 X104.548 Y70.259 E0.02564 ; perimeter
G1 X105.303 Y70.572 E0.02563 ; perimeter
G1 X106.000 Y70.999 E0.02564 ; perimeter
G1 X106.622 Y71.530 E0.02564 ; perimeter
G1 X107.153 Y72.152 E0.02564 ; perimeter
G1 X107.580 Y72.849 E0.02564 ; perimeter
G1 X107.893 Y73.605 E0.02564 ; perimeter
G1 X108.084 Y74.400 E0.02564 ; perimeter
G1 X108.150 Y75.246 E0.02661 ; perimeter
G1 X108.150 Y114.448 E1.22915 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X108.150 Y123.088 E-2.28000 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X45.305 Y86.057 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X45.354 Y87.602 E0.04846 ; perimeter
G1 X45.466 Y88.252 E0.02069 ; perimeter
G1 X45.400 Y88.817 E0.01786 ; perimeter
G1 X44.912 Y88.817 E0.01527 ; perimeter
G1 X44.846 Y88.261 E0.01755 ; perimeter
G1 X44.959 Y87.576 E0.02177 ; perimeter
G1 X45.009 Y86.057 E0.04766 ; perimeter
G1 X44.226 Y85.879 E0.02519 ; perimeter
G1 X43.784 Y85.708 E0.01485 ; perimeter
G1 X43.373 Y85.475 E0.01481 ; perimeter
G1 X43.001 Y85.184 E0.01481 ; perimeter
G1 X42.675 Y84.842 E0.01481 ; perimeter
G1 X42.403 Y84.455 E0.01481 ; perimeter
G1 X42.191 Y84.033 E0.01481 ; perimeter
G1 X42.043 Y83.585 E0.01481 ; perimeter
G1 X41.962 Y83.119 E0.01481 ; perimeter
G1 X41.951 Y82.647 E0.01481 ; perimeter
G1 X42.009 Y82.178 E0.01481 ; perimeter
G1 X42.133 Y81.730 E0.01460 ; perimeter
G1 X42.325 Y81.296 E0.01486 ; perimeter
G1 X42.409 Y81.168 E0.00479 ; perimeter
G1 X42.718 Y81.478 E0.01372 ; perimeter
G1 X42.580 Y81.737 E0.00921 ; perimeter
G1 X42.421 Y82.260 E0.01715 ; perimeter
G1 X42.367 Y82.805 E0.01715 ; perimeter
G1 X42.420 Y83.349 E0.01715 ; perimeter
G1 X42.579 Y83.873 E0.01715 ; perimeter
G1 X42.837 Y84.355 E0.01715 ; perimeter
G1 X43.184 Y84.778 E0.01715 ; perimeter
G1 X43.606 Y85.126 E0.01715 ; perimeter
G1 X44.083 Y85.381 E0.01696 ; perimeter
G1 X44.617 Y85.555 E0.01758 ; perimeter
G1 X45.168 Y85.585 E0.01731 ; perimeter
G1 X45.692 Y85.546 E0.01649 ; perimeter
G1 X46.225 Y85.385 E0.01746 ; perimeter
G1 X46.707 Y85.127 E0.01715 ; perimeter
G1 X47.131 Y84.780 E0.01715 ; perimeter
G1 X47.478 Y84.357 E0.01715 ; perimeter
G1 X47.736 Y83.875 E0.01715 ; perimeter
G1 X47.895 Y83.351 E0.01716 ; perimeter
G1 X47.949 Y82.807 E0.01716 ; perimeter
G1 X47.895 Y82.262 E0.01715 ; perimeter
G1 X47.737 Y81.739 E0.01715 ; perimeter
G1 X47.598 Y81.480 E0.00921 ; perimeter
G1 X47.908 Y81.171 E0.01372 ; perimeter
G1 X47.992 Y81.299 E0.00481 ; perimeter
G1 X48.181 Y81.725 E0.01463 ; perimeter
G1 X48.307 Y82.181 E0.01481 ; perimeter
G1 X48.365 Y82.650 E0.01481 ; perimeter
G1 X48.353 Y83.122 E0.01481 ; perimeter
G1 X48.272 Y83.587 E0.01481 ; perimeter
G1 X48.124 Y84.036 E0.01481 ; perimeter
G1 X47.911 Y84.458 E0.01481 ; perimeter
G1 X47.639 Y84.844 E0.01481 ; perimeter
G1 X47.313 Y85.186 E0.01481 ; perimeter
G1 X46.941 Y85.476 E0.01481 ; perimeter
G1 X46.529 Y85.709 E0.01482 ; perimeter
G1 X46.088 Y85.879 E0.01484 ; perimeter
G1 X45.364 Y86.043 E0.02327 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X45.354 Y87.602 E-0.41117 ; wipe and retract
G1 X45.466 Y88.252 E-0.17416 ; wipe and retract
G1 X45.400 Y88.817 E-0.15029 ; wipe and retract
G1 X44.912 Y88.817 E-0.12855 ; wipe and retract
G1 X44.846 Y88.261 E-0.14771 ; wipe and retract
G1 X44.959 Y87.576 E-0.18323 ; wipe and retract
G1 X45.009 Y86.057 E-0.40112 ; wipe and retract
G1 X44.226 Y85.879 E-0.21198 ; wipe and retract
G1 X43.784 Y85.708 E-0.12495 ; wipe and retract
G1 X43.373 Y85.475 E-0.12469 ; wipe and retract
G1 X43.001 Y85.184 E-0.12466 ; wipe and retract
G1 X42.746 Y84.916 E-0.09749 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X40.786 Y102.872 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X41.060 Y102.936 E0.00884 ; perimeter
G1 X41.432 Y103.143 E0.01334 ; perimeter
G1 X41.747 Y103.486 E0.01460 ; perimeter
G1 X42.197 Y104.221 E0.02703 ; perimeter
G1 X42.450 Y104.715 E0.01741 ; perimeter
G1 X42.676 Y105.223 E0.01741 ; perimeter
G1 X42.873 Y105.742 E0.01741 ; perimeter
G1 X43.040 Y106.272 E0.01741 ; perimeter
G1 X43.178 Y106.810 E0.01741 ; perimeter
G1 X43.285 Y107.354 E0.01741 ; perimeter
G1 X43.361 Y107.894 E0.01707 ; perimeter
G1 X43.425 Y109.035 E0.03586 ; perimeter
G1 X43.430 Y112.829 E0.11894 ; perimeter
G1 X43.459 Y113.337 E0.01595 ; perimeter
G1 X43.566 Y114.270 E0.02944 ; perimeter
G1 X43.459 Y115.154 E0.02794 ; perimeter
G1 X43.430 Y115.635 E0.01510 ; perimeter
G1 X43.425 Y117.787 E0.06749 ; perimeter
G1 X43.331 Y118.077 E0.00953 ; perimeter
G1 X43.250 Y118.235 E0.00557 ; perimeter
G1 X43.036 Y118.517 E0.01111 ; perimeter
G1 X42.763 Y118.744 E0.01112 ; perimeter
G1 X42.446 Y118.901 E0.01112 ; perimeter
G1 X42.297 Y118.945 E0.00485 ; perimeter
G1 X41.878 Y118.994 E0.01324 ; perimeter
G1 X39.545 Y118.994 E0.07313 ; perimeter
G1 X39.126 Y118.945 E0.01324 ; perimeter
G1 X38.978 Y118.901 E0.00485 ; perimeter
G1 X38.660 Y118.744 E0.01112 ; perimeter
G1 X38.517 Y118.638 E0.00557 ; perimeter
G1 X38.272 Y118.382 E0.01112 ; perimeter
G1 X38.173 Y118.235 E0.00557 ; perimeter
G1 X38.092 Y118.077 E0.00557 ; perimeter
G1 X37.999 Y117.788 E0.00953 ; perimeter
G1 X37.993 Y114.654 E0.09825 ; perimeter
G1 X37.964 Y114.161 E0.01548 ; perimeter
G1 X37.858 Y113.257 E0.02856 ; perimeter
G1 X37.964 Y112.337 E0.02902 ; perimeter
G1 X37.993 Y111.837 E0.01573 ; perimeter
G1 X37.999 Y109.035 E0.08783 ; perimeter
G1 X38.062 Y107.894 E0.03586 ; perimeter
G1 X38.138 Y107.354 E0.01707 ; perimeter
G1 X38.246 Y106.810 E0.01741 ; perimeter
G1 X38.383 Y106.272 E0.01741 ; perimeter
G1 X38.551 Y105.742 E0.01741 ; perimeter
G1 X38.748 Y105.223 E0.01741 ; perimeter
G1 X38.973 Y104.715 E0.01741 ; perimeter
G1 X39.226 Y104.221 E0.01741 ; perimeter
G1 X39.676 Y103.486 E0.02703 ; perimeter
G1 X39.991 Y103.143 E0.01460 ; perimeter
G1 X40.363 Y102.936 E0.01334 ; perimeter
G1 X40.638 Y102.872 E0.00884 ; perimeter
G1 X40.726 Y102.872 E0.00277 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X41.060 Y102.936 E-0.08989 ; wipe and retract
G1 X41.432 Y103.143 E-0.11231 ; wipe and retract
G1 X41.747 Y103.486 E-0.12288 ; wipe and retract
G1 X42.197 Y104.221 E-0.22747 ; wipe and retract
G1 X42.450 Y104.715 E-0.14654 ; wipe and retract
G1 X42.676 Y105.223 E-0.14655 ; wipe and retract
G1 X42.873 Y105.742 E-0.14656 ; wipe and retract
G1 X43.040 Y106.272 E-0.14655 ; wipe and retract
G1 X43.178 Y106.810 E-0.14656 ; wipe and retract
G1 X43.285 Y107.354 E-0.14655 ; wipe and retract
G1 X43.361 Y107.894 E-0.14365 ; wipe and retract
G1 X43.425 Y109.035 E-0.30178 ; wipe and retract
G1 X43.427 Y110.561 E-0.40271 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X47.799 Y93.692 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X48.095 Y93.472 E0.01156 ; perimeter
G1 X48.576 Y93.472 E0.01510 ; perimeter
G1 X48.872 Y93.692 E0.01156 ; perimeter
G1 X48.576 Y93.913 E0.01156 ; perimeter
G1 X48.095 Y93.913 E0.01510 ; perimeter
G1 X47.848 Y93.727 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.095 Y93.472 E-0.09371 ; wipe and retract
G1 X48.576 Y93.472 E-0.12708 ; wipe and retract
G1 X48.872 Y93.692 E-0.09729 ; wipe and retract
G1 X48.576 Y93.913 E-0.09729 ; wipe and retract
G1 X48.095 Y93.913 E-0.12708 ; wipe and retract
G1 X47.848 Y93.727 E-0.08146 ; wipe and retract
G1 E-1.77609 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X45.912 Y94.565 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X44.471 Y94.565 E0.04518 ; perimeter
G1 X44.462 Y94.348 E0.00681 ; perimeter
G1 X44.340 Y93.502 E0.02680 ; perimeter
G1 X44.463 Y92.893 E0.01949 ; perimeter
G1 X44.475 Y92.544 E0.01095 ; perimeter
G1 X45.908 Y92.544 E0.04495 ; perimeter
G1 X45.921 Y92.882 E0.01062 ; perimeter
G1 X46.043 Y93.748 E0.02740 ; perimeter
G1 X45.921 Y94.341 E0.01898 ; perimeter
G1 X45.914 Y94.505 E0.00516 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X44.471 Y94.565 E-0.38119 ; wipe and retract
G1 X44.462 Y94.348 E-0.05730 ; wipe and retract
G1 X44.340 Y93.502 E-0.22555 ; wipe and retract
G1 X44.463 Y92.893 E-0.16405 ; wipe and retract
G1 X44.475 Y92.544 E-0.09216 ; wipe and retract
G1 X45.908 Y92.544 E-0.37829 ; wipe and retract
G1 X45.921 Y92.882 E-0.08939 ; wipe and retract
G1 X46.043 Y93.748 E-0.23065 ; wipe and retract
G1 X45.921 Y94.341 E-0.15973 ; wipe and retract
G1 X45.914 Y94.505 E-0.04344 ; wipe and retract
G1 E-0.57825 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X47.472 Y88.532 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X47.177 Y88.311 E0.01157 ; perimeter
G1 X47.472 Y88.091 E0.01157 ; perimeter
G1 X47.753 Y88.091 E0.00881 ; perimeter
G1 X48.049 Y88.311 E0.01157 ; perimeter
G1 X47.753 Y88.532 E0.01157 ; perimeter
G1 X47.532 Y88.532 E0.00693 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X47.177 Y88.311 E-0.11049 ; wipe and retract
G1 X47.472 Y88.091 E-0.09739 ; wipe and retract
G1 X47.753 Y88.091 E-0.07415 ; wipe and retract
G1 X48.049 Y88.311 E-0.09739 ; wipe and retract
G1 X47.753 Y88.532 E-0.09739 ; wipe and retract
G1 X47.532 Y88.532 E-0.05832 ; wipe and retract
G1 E-1.86486 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X50.779 Y90.666 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X50.064 Y90.100 E0.02859 ; perimeter
G1 X50.062 Y89.627 E0.01483 ; perimeter
G1 X50.033 Y89.174 E0.01422 ; perimeter
G1 X49.911 Y88.204 E0.03066 ; perimeter
G1 X50.039 Y87.758 E0.01452 ; perimeter
G1 X50.028 Y87.527 E0.00728 ; perimeter
G1 X51.577 Y87.503 E0.04858 ; perimeter
G1 X51.580 Y88.116 E0.01925 ; perimeter
G1 X51.638 Y88.941 E0.02592 ; perimeter
G1 X51.787 Y89.848 E0.02882 ; perimeter
G1 X51.757 Y90.007 E0.00508 ; perimeter
G1 X51.417 Y90.260 E0.01330 ; perimeter
G1 X50.945 Y90.669 E0.01957 ; perimeter
G1 X51.147 Y95.570 E0.15382 ; perimeter
G1 X51.854 Y97.362 E0.06039 ; perimeter
G1 X51.938 Y100.189 E0.08869 ; perimeter
G1 X50.054 Y100.215 E0.05907 ; perimeter
G1 X50.058 Y97.388 E0.08864 ; perimeter
G1 X50.717 Y95.566 E0.06075 ; perimeter
G1 X50.693 Y94.567 E0.03130 ; perimeter
G1 X50.594 Y93.704 E0.02726 ; perimeter
G1 X50.715 Y92.826 E0.02778 ; perimeter
G1 X50.750 Y92.361 E0.01463 ; perimeter
G1 X50.778 Y90.726 E0.05126 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X50.064 Y90.100 E-0.25058 ; wipe and retract
G1 X50.062 Y89.627 E-0.12479 ; wipe and retract
G1 X50.033 Y89.174 E-0.11970 ; wipe and retract
G1 X49.911 Y88.204 E-0.25809 ; wipe and retract
G1 X50.039 Y87.758 E-0.12224 ; wipe and retract
G1 X50.028 Y87.527 E-0.06128 ; wipe and retract
G1 X51.577 Y87.503 E-0.40890 ; wipe and retract
G1 X51.580 Y88.116 E-0.16198 ; wipe and retract
G1 X51.638 Y88.941 E-0.21814 ; wipe and retract
G1 X51.787 Y89.848 E-0.24259 ; wipe and retract
G1 X51.757 Y90.007 E-0.04272 ; wipe and retract
G1 X51.417 Y90.260 E-0.11195 ; wipe and retract
G1 X50.967 Y90.650 E-0.15705 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X53.557 Y89.761 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X53.852 Y89.541 E0.01157 ; perimeter
G1 X54.033 Y89.541 E0.00568 ; perimeter
G1 X54.329 Y89.761 E0.01157 ; perimeter
G1 X54.033 Y89.982 E0.01157 ; perimeter
G1 X53.852 Y89.982 E0.00568 ; perimeter
G1 X53.605 Y89.796 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X53.852 Y89.541 E-0.09382 ; wipe and retract
G1 X54.033 Y89.541 E-0.04777 ; wipe and retract
G1 X54.329 Y89.761 E-0.09739 ; wipe and retract
G1 X54.033 Y89.982 E-0.09739 ; wipe and retract
G1 X53.852 Y89.982 E-0.04777 ; wipe and retract
G1 X53.605 Y89.796 E-0.08156 ; wipe and retract
G1 E-1.93429 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X60.332 Y90.685 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X60.687 Y90.586 E0.01156 ; perimeter
G1 X61.146 Y90.763 E0.01541 ; perimeter
G1 X61.342 Y91.075 E0.01156 ; perimeter
G1 X60.987 Y91.174 E0.01156 ; perimeter
G1 X60.528 Y90.997 E0.01541 ; perimeter
G1 X60.365 Y90.735 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X60.687 Y90.586 E-0.09371 ; wipe and retract
G1 X61.146 Y90.763 E-0.12971 ; wipe and retract
G1 X61.342 Y91.075 E-0.09730 ; wipe and retract
G1 X60.987 Y91.174 E-0.09728 ; wipe and retract
G1 X60.528 Y90.997 E-0.12973 ; wipe and retract
G1 X60.365 Y90.735 E-0.08145 ; wipe and retract
G1 E-1.77083 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X61.351 Y84.387 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X61.020 Y84.225 E0.01156 ; perimeter
G1 X61.269 Y83.953 E0.01156 ; perimeter
G1 X61.831 Y83.847 E0.01792 ; perimeter
G1 X62.162 Y84.009 E0.01156 ; perimeter
G1 X61.913 Y84.280 E0.01156 ; perimeter
G1 X61.410 Y84.376 E0.01604 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X61.020 Y84.225 E-0.11038 ; wipe and retract
G1 X61.269 Y83.953 E-0.09729 ; wipe and retract
G1 X61.831 Y83.847 E-0.15083 ; wipe and retract
G1 X62.162 Y84.009 E-0.09729 ; wipe and retract
G1 X61.913 Y84.280 E-0.09728 ; wipe and retract
G1 X61.410 Y84.376 E-0.13500 ; wipe and retract
G1 E-1.71192 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X58.236 Y91.096 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X56.312 Y91.096 E0.06034 ; perimeter
G1 X56.200 Y90.228 E0.02744 ; perimeter
G1 X56.075 Y89.823 E0.01331 ; perimeter
G1 X56.116 Y88.774 E0.03289 ; perimeter
G1 X56.108 Y88.259 E0.01617 ; perimeter
G1 X55.774 Y83.459 E0.15087 ; perimeter
G1 X55.770 Y80.732 E0.08548 ; perimeter
G1 X55.572 Y80.236 E0.01675 ; perimeter
G1 X55.530 Y80.027 E0.00670 ; perimeter
G1 X55.515 Y79.798 E0.00719 ; perimeter
G1 X55.530 Y79.569 E0.00719 ; perimeter
G1 X55.575 Y79.344 E0.00719 ; perimeter
G1 X55.646 Y79.135 E0.00692 ; perimeter
G1 X55.794 Y78.856 E0.00992 ; perimeter
G1 X56.029 Y78.558 E0.01188 ; perimeter
G1 X56.201 Y78.407 E0.00719 ; perimeter
G1 X56.392 Y78.280 E0.00719 ; perimeter
G1 X56.597 Y78.178 E0.00719 ; perimeter
G1 X56.815 Y78.104 E0.00719 ; perimeter
G1 X57.040 Y78.060 E0.00719 ; perimeter
G1 X57.268 Y78.045 E0.00719 ; perimeter
G1 X57.497 Y78.060 E0.00719 ; perimeter
G1 X57.722 Y78.104 E0.00719 ; perimeter
G1 X57.939 Y78.178 E0.00719 ; perimeter
G1 X58.145 Y78.279 E0.00719 ; perimeter
G1 X58.336 Y78.407 E0.00719 ; perimeter
G1 X58.508 Y78.558 E0.00719 ; perimeter
G1 X58.660 Y78.731 E0.00719 ; perimeter
G1 X58.787 Y78.921 E0.00719 ; perimeter
G1 X58.888 Y79.127 E0.00719 ; perimeter
G1 X58.962 Y79.344 E0.00719 ; perimeter
G1 X59.007 Y79.569 E0.00719 ; perimeter
G1 X59.022 Y79.798 E0.00719 ; perimeter
G1 X59.007 Y80.027 E0.00719 ; perimeter
G1 X58.966 Y80.234 E0.00661 ; perimeter
G1 X58.767 Y80.733 E0.01686 ; perimeter
G1 X58.767 Y83.003 E0.07118 ; perimeter
G1 X58.825 Y84.410 E0.04415 ; perimeter
G1 X58.773 Y84.418 E0.00166 ; perimeter
G1 X58.620 Y85.398 E0.03112 ; perimeter
G1 X58.540 Y86.304 E0.02851 ; perimeter
G1 X58.381 Y88.869 E0.08058 ; perimeter
G1 X58.394 Y90.187 E0.04131 ; perimeter
G1 X58.441 Y90.202 E0.00154 ; perimeter
G1 X58.286 Y90.711 E0.01668 ; perimeter
G1 X58.244 Y91.037 E0.01030 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X56.312 Y91.096 E-0.51009 ; wipe and retract
G1 X56.200 Y90.228 E-0.23091 ; wipe and retract
G1 X56.075 Y89.823 E-0.11202 ; wipe and retract
G1 X56.116 Y88.774 E-0.27683 ; wipe and retract
G1 X56.108 Y88.259 E-0.13606 ; wipe and retract
G1 X55.841 Y84.425 E-1.01409 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X64.159 Y83.537 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X64.103 Y82.839 E0.02196 ; perimeter
G1 X64.055 Y82.558 E0.00895 ; perimeter
G1 X64.010 Y81.850 E0.02222 ; perimeter
G1 X64.064 Y81.170 E0.02138 ; perimeter
G1 X64.223 Y80.502 E0.02154 ; perimeter
G1 X64.488 Y79.849 E0.02210 ; perimeter
G1 X64.859 Y79.220 E0.02289 ; perimeter
G1 X65.332 Y78.628 E0.02378 ; perimeter
G1 X65.958 Y78.041 E0.02690 ; perimeter
G1 X66.568 Y77.595 E0.02371 ; perimeter
G1 X67.312 Y77.179 E0.02673 ; perimeter
G1 X68.124 Y76.844 E0.02752 ; perimeter
G1 X68.994 Y76.597 E0.02836 ; perimeter
G1 X69.916 Y76.424 E0.02942 ; perimeter
G1 X70.163 Y76.397 E0.00780 ; perimeter
G1 X70.805 Y76.242 E0.02072 ; perimeter
G1 X71.448 Y76.397 E0.02072 ; perimeter
G1 X71.695 Y76.424 E0.00780 ; perimeter
G1 X72.617 Y76.597 E0.02942 ; perimeter
G1 X73.487 Y76.844 E0.02836 ; perimeter
G1 X74.299 Y77.179 E0.02752 ; perimeter
G1 X75.043 Y77.595 E0.02673 ; perimeter
G1 X75.653 Y78.041 E0.02371 ; perimeter
G1 X76.279 Y78.628 E0.02690 ; perimeter
G1 X76.752 Y79.220 E0.02378 ; perimeter
G1 X77.123 Y79.849 E0.02289 ; perimeter
G1 X77.388 Y80.502 E0.02210 ; perimeter
G1 X77.547 Y81.171 E0.02154 ; perimeter
G1 X77.601 Y81.850 E0.02138 ; perimeter
G1 X77.556 Y82.558 E0.02222 ; perimeter
G1 X77.508 Y82.839 E0.00895 ; perimeter
G1 X77.450 Y83.552 E0.02243 ; perimeter
G1 X77.069 Y83.999 E0.01841 ; perimeter
G1 X76.767 Y84.457 E0.01723 ; perimeter
G1 X76.283 Y85.058 E0.02417 ; perimeter
G1 X75.714 Y85.595 E0.02455 ; perimeter
G1 X75.049 Y86.075 E0.02571 ; perimeter
G1 X74.307 Y86.484 E0.02658 ; perimeter
G1 X73.496 Y86.812 E0.02742 ; perimeter
G1 X72.627 Y87.053 E0.02828 ; perimeter
G1 X70.805 Y87.385 E0.05805 ; perimeter
G1 X68.984 Y87.053 E0.05805 ; perimeter
G1 X68.115 Y86.812 E0.02828 ; perimeter
G1 X67.304 Y86.484 E0.02742 ; perimeter
G1 X66.562 Y86.075 E0.02658 ; perimeter
G1 X65.897 Y85.595 E0.02571 ; perimeter
G1 X65.327 Y85.057 E0.02456 ; perimeter
G1 X64.840 Y84.454 E0.02430 ; perimeter
G1 X64.601 Y84.098 E0.01347 ; perimeter
G1 X64.196 Y83.584 E0.02051 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X64.103 Y82.839 E-0.19816 ; wipe and retract
G1 X64.055 Y82.558 E-0.07530 ; wipe and retract
G1 X64.010 Y81.850 E-0.18703 ; wipe and retract
G1 X64.064 Y81.170 E-0.17996 ; wipe and retract
G1 X64.223 Y80.502 E-0.18125 ; wipe and retract
G1 X64.488 Y79.849 E-0.18602 ; wipe and retract
G1 X64.859 Y79.220 E-0.19262 ; wipe and retract
G1 X65.332 Y78.628 E-0.20014 ; wipe and retract
G1 X65.958 Y78.041 E-0.22638 ; wipe and retract
G1 X66.568 Y77.595 E-0.19952 ; wipe and retract
G1 X67.312 Y77.179 E-0.22494 ; wipe and retract
G1 X68.113 Y76.849 E-0.22869 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X85.302 Y90.998 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X85.294 Y91.096 E0.00307 ; perimeter
G1 X83.375 Y91.096 E0.06018 ; perimeter
G1 X83.325 Y90.711 E0.01218 ; perimeter
G1 X83.170 Y90.202 E0.01668 ; perimeter
G1 X83.217 Y90.187 E0.00154 ; perimeter
G1 X83.230 Y88.869 E0.04131 ; perimeter
G1 X83.071 Y86.304 E0.08058 ; perimeter
G1 X82.991 Y85.398 E0.02851 ; perimeter
G1 X82.838 Y84.418 E0.03112 ; perimeter
G1 X82.786 Y84.410 E0.00166 ; perimeter
G1 X82.844 Y83.003 E0.04415 ; perimeter
G1 X82.844 Y80.733 E0.07119 ; perimeter
G1 X82.646 Y80.236 E0.01676 ; perimeter
G1 X82.604 Y80.027 E0.00670 ; perimeter
G1 X82.589 Y79.798 E0.00719 ; perimeter
G1 X82.604 Y79.578 E0.00692 ; perimeter
G1 X82.723 Y79.127 E0.01461 ; perimeter
G1 X82.824 Y78.921 E0.00719 ; perimeter
G1 X82.951 Y78.731 E0.00719 ; perimeter
G1 X83.103 Y78.558 E0.00719 ; perimeter
G1 X83.275 Y78.407 E0.00719 ; perimeter
G1 X83.466 Y78.279 E0.00719 ; perimeter
G1 X83.671 Y78.178 E0.00719 ; perimeter
G1 X83.889 Y78.104 E0.00719 ; perimeter
G1 X84.114 Y78.060 E0.00719 ; perimeter
G1 X84.343 Y78.045 E0.00719 ; perimeter
G1 X84.571 Y78.060 E0.00719 ; perimeter
G1 X84.796 Y78.104 E0.00719 ; perimeter
G1 X85.014 Y78.178 E0.00719 ; perimeter
G1 X85.416 Y78.413 E0.01461 ; perimeter
G1 X85.582 Y78.558 E0.00692 ; perimeter
G1 X85.734 Y78.731 E0.00719 ; perimeter
G1 X85.861 Y78.921 E0.00719 ; perimeter
G1 X85.962 Y79.127 E0.00719 ; perimeter
G1 X86.065 Y79.492 E0.01188 ; perimeter
G1 X86.095 Y79.807 E0.00992 ; perimeter
G1 X86.081 Y80.027 E0.00692 ; perimeter
G1 X86.040 Y80.234 E0.00661 ; perimeter
G1 X85.841 Y80.733 E0.01686 ; perimeter
G1 X85.837 Y83.458 E0.08544 ; perimeter
G1 X85.503 Y88.259 E0.15089 ; perimeter
G1 X85.495 Y88.774 E0.01617 ; perimeter
G1 X85.536 Y89.823 E0.03289 ; perimeter
G1 X85.409 Y90.232 E0.01345 ; perimeter
G1 X85.311 Y90.939 E0.02238 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X85.294 Y91.096 E-0.04165 ; wipe and retract
G1 X83.375 Y91.096 E-0.50647 ; wipe and retract
G1 X83.325 Y90.711 E-0.10252 ; wipe and retract
G1 X83.170 Y90.202 E-0.14039 ; wipe and retract
G1 X83.217 Y90.187 E-0.01296 ; wipe and retract
G1 X83.230 Y88.869 E-0.34765 ; wipe and retract
G1 X83.071 Y86.304 E-0.67815 ; wipe and retract
G1 X82.991 Y85.398 E-0.23999 ; wipe and retract
G1 X82.868 Y84.611 E-0.21022 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.591 Y84.225 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X80.260 Y84.387 E0.01156 ; perimeter
G1 X79.698 Y84.280 E0.01792 ; perimeter
G1 X79.449 Y84.009 E0.01156 ; perimeter
G1 X79.780 Y83.847 E0.01156 ; perimeter
G1 X80.342 Y83.953 E0.01792 ; perimeter
G1 X80.549 Y84.182 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X80.260 Y84.387 E-0.09371 ; wipe and retract
G1 X79.698 Y84.280 E-0.15084 ; wipe and retract
G1 X79.449 Y84.009 E-0.09728 ; wipe and retract
G1 X79.780 Y83.847 E-0.09729 ; wipe and retract
G1 X80.342 Y83.953 E-0.15084 ; wipe and retract
G1 X80.549 Y84.182 E-0.08145 ; wipe and retract
G1 E-1.72859 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.924 Y90.586 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X81.279 Y90.685 E0.01156 ; perimeter
G1 X81.083 Y90.997 E0.01156 ; perimeter
G1 X80.624 Y91.174 E0.01541 ; perimeter
G1 X80.269 Y91.075 E0.01156 ; perimeter
G1 X80.465 Y90.763 E0.01156 ; perimeter
G1 X80.868 Y90.607 E0.01353 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X81.279 Y90.685 E-0.11038 ; wipe and retract
G1 X81.083 Y90.997 E-0.09729 ; wipe and retract
G1 X80.624 Y91.174 E-0.12973 ; wipe and retract
G1 X80.269 Y91.075 E-0.09728 ; wipe and retract
G1 X80.465 Y90.763 E-0.09730 ; wipe and retract
G1 X80.868 Y90.607 E-0.11386 ; wipe and retract
G1 E-1.75416 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X87.282 Y89.761 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X87.578 Y89.541 E0.01157 ; perimeter
G1 X87.759 Y89.541 E0.00568 ; perimeter
G1 X88.054 Y89.761 E0.01157 ; perimeter
G1 X87.759 Y89.982 E0.01157 ; perimeter
G1 X87.578 Y89.982 E0.00568 ; perimeter
G1 X87.331 Y89.796 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X87.578 Y89.541 E-0.09382 ; wipe and retract
G1 X87.759 Y89.541 E-0.04777 ; wipe and retract
G1 X88.054 Y89.761 E-0.09739 ; wipe and retract
G1 X87.759 Y89.982 E-0.09739 ; wipe and retract
G1 X87.578 Y89.982 E-0.04777 ; wipe and retract
G1 X87.331 Y89.796 E-0.08157 ; wipe and retract
G1 E-1.93429 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X90.666 Y90.669 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X90.194 Y90.260 E0.01957 ; perimeter
G1 X89.854 Y90.008 E0.01330 ; perimeter
G1 X89.824 Y89.848 E0.00508 ; perimeter
G1 X89.973 Y88.941 E0.02882 ; perimeter
G1 X90.031 Y88.116 E0.02592 ; perimeter
G1 X90.034 Y87.503 E0.01924 ; perimeter
G1 X91.583 Y87.527 E0.04858 ; perimeter
G1 X91.572 Y87.758 E0.00728 ; perimeter
G1 X91.700 Y88.204 E0.01453 ; perimeter
G1 X91.578 Y89.174 E0.03066 ; perimeter
G1 X91.549 Y89.627 E0.01422 ; perimeter
G1 X91.546 Y90.100 E0.01483 ; perimeter
G1 X90.832 Y90.666 E0.02859 ; perimeter
G1 X90.861 Y92.361 E0.05315 ; perimeter
G1 X90.896 Y92.826 E0.01463 ; perimeter
G1 X91.017 Y93.704 E0.02777 ; perimeter
G1 X90.918 Y94.567 E0.02726 ; perimeter
G1 X90.894 Y95.566 E0.03130 ; perimeter
G1 X91.553 Y97.388 E0.06075 ; perimeter
G1 X91.557 Y100.215 E0.08864 ; perimeter
G1 X89.673 Y100.189 E0.05906 ; perimeter
G1 X89.757 Y97.362 E0.08869 ; perimeter
G1 X90.464 Y95.570 E0.06039 ; perimeter
G1 X90.664 Y90.728 E0.15193 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X90.194 Y90.260 E-0.17498 ; wipe and retract
G1 X89.854 Y90.008 E-0.11194 ; wipe and retract
G1 X89.824 Y89.848 E-0.04274 ; wipe and retract
G1 X89.973 Y88.941 E-0.24258 ; wipe and retract
G1 X90.031 Y88.116 E-0.21814 ; wipe and retract
G1 X90.034 Y87.503 E-0.16197 ; wipe and retract
G1 X91.583 Y87.527 E-0.40890 ; wipe and retract
G1 X91.572 Y87.758 E-0.06128 ; wipe and retract
G1 X91.700 Y88.204 E-0.12226 ; wipe and retract
G1 X91.578 Y89.174 E-0.25807 ; wipe and retract
G1 X91.549 Y89.627 E-0.11970 ; wipe and retract
G1 X91.546 Y90.100 E-0.12479 ; wipe and retract
G1 X90.856 Y90.647 E-0.23265 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X93.562 Y88.311 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X93.858 Y88.091 E0.01157 ; perimeter
G1 X94.139 Y88.091 E0.00881 ; perimeter
G1 X94.434 Y88.311 E0.01157 ; perimeter
G1 X94.139 Y88.532 E0.01157 ; perimeter
G1 X93.858 Y88.532 E0.00881 ; perimeter
G1 X93.611 Y88.346 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X93.858 Y88.091 E-0.09382 ; wipe and retract
G1 X94.139 Y88.091 E-0.07415 ; wipe and retract
G1 X94.434 Y88.311 E-0.09739 ; wipe and retract
G1 X94.139 Y88.532 E-0.09739 ; wipe and retract
G1 X93.858 Y88.532 E-0.07415 ; wipe and retract
G1 X93.611 Y88.346 E-0.08156 ; wipe and retract
G1 E-1.88153 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X95.705 Y92.544 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X97.145 Y92.543 E0.04515 ; perimeter
G1 X97.262 Y93.630 E0.03428 ; perimeter
G1 X97.149 Y94.233 E0.01921 ; perimeter
G1 X97.137 Y94.565 E0.01044 ; perimeter
G1 X95.685 Y94.566 E0.04553 ; perimeter
G1 X95.576 Y93.620 E0.02986 ; perimeter
G1 X95.690 Y93.001 E0.01973 ; perimeter
G1 X95.703 Y92.604 E0.01247 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X97.145 Y92.543 E-0.38087 ; wipe and retract
G1 X97.262 Y93.630 E-0.28852 ; wipe and retract
G1 X97.149 Y94.233 E-0.16170 ; wipe and retract
G1 X97.137 Y94.565 E-0.08783 ; wipe and retract
G1 X95.685 Y94.566 E-0.38316 ; wipe and retract
G1 X95.576 Y93.620 E-0.25130 ; wipe and retract
G1 X95.690 Y93.001 E-0.16604 ; wipe and retract
G1 X95.703 Y92.604 E-0.10495 ; wipe and retract
G1 E-0.57562 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X93.812 Y93.692 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X93.516 Y93.913 E0.01156 ; perimeter
G1 X93.035 Y93.913 E0.01510 ; perimeter
G1 X92.739 Y93.692 E0.01156 ; perimeter
G1 X93.035 Y93.472 E0.01156 ; perimeter
G1 X93.516 Y93.472 E0.01510 ; perimeter
G1 X93.763 Y93.657 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X93.516 Y93.913 E-0.09371 ; wipe and retract
G1 X93.035 Y93.913 E-0.12708 ; wipe and retract
G1 X92.739 Y93.692 E-0.09729 ; wipe and retract
G1 X93.035 Y93.472 E-0.09729 ; wipe and retract
G1 X93.516 Y93.472 E-0.12708 ; wipe and retract
G1 X93.763 Y93.657 E-0.08146 ; wipe and retract
G1 E-1.77609 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X100.825 Y102.872 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X100.973 Y102.872 E0.00465 ; perimeter
G1 X101.248 Y102.936 E0.00884 ; perimeter
G1 X101.620 Y103.143 E0.01334 ; perimeter
G1 X101.935 Y103.486 E0.01460 ; perimeter
G1 X102.385 Y104.221 E0.02703 ; perimeter
G1 X102.638 Y104.715 E0.01741 ; perimeter
G1 X102.863 Y105.223 E0.01741 ; perimeter
G1 X103.060 Y105.742 E0.01741 ; perimeter
G1 X103.228 Y106.272 E0.01741 ; perimeter
G1 X103.365 Y106.810 E0.01741 ; perimeter
G1 X103.473 Y107.354 E0.01741 ; perimeter
G1 X103.549 Y107.894 E0.01707 ; perimeter
G1 X103.612 Y109.035 E0.03586 ; perimeter
G1 X103.618 Y111.837 E0.08783 ; perimeter
G1 X103.647 Y112.337 E0.01573 ; perimeter
G1 X103.753 Y113.257 E0.02902 ; perimeter
G1 X103.647 Y114.161 E0.02856 ; perimeter
G1 X103.618 Y114.654 E0.01548 ; perimeter
G1 X103.612 Y117.788 E0.09825 ; perimeter
G1 X103.519 Y118.077 E0.00953 ; perimeter
G1 X103.438 Y118.235 E0.00557 ; perimeter
G1 X103.339 Y118.382 E0.00557 ; perimeter
G1 X103.094 Y118.638 E0.01112 ; perimeter
G1 X102.951 Y118.744 E0.00557 ; perimeter
G1 X102.633 Y118.901 E0.01112 ; perimeter
G1 X102.485 Y118.945 E0.00485 ; perimeter
G1 X102.065 Y118.994 E0.01324 ; perimeter
G1 X99.733 Y118.994 E0.07313 ; perimeter
G1 X99.314 Y118.945 E0.01324 ; perimeter
G1 X99.165 Y118.901 E0.00485 ; perimeter
G1 X98.848 Y118.744 E0.01112 ; perimeter
G1 X98.575 Y118.517 E0.01112 ; perimeter
G1 X98.361 Y118.235 E0.01112 ; perimeter
G1 X98.279 Y118.077 E0.00557 ; perimeter
G1 X98.186 Y117.787 E0.00953 ; perimeter
G1 X98.181 Y115.635 E0.06749 ; perimeter
G1 X98.151 Y115.154 E0.01510 ; perimeter
G1 X98.045 Y114.270 E0.02794 ; perimeter
G1 X98.152 Y113.337 E0.02944 ; perimeter
G1 X98.181 Y112.829 E0.01595 ; perimeter
G1 X98.186 Y109.035 E0.11894 ; perimeter
G1 X98.250 Y107.894 E0.03586 ; perimeter
G1 X98.326 Y107.354 E0.01707 ; perimeter
G1 X98.433 Y106.810 E0.01741 ; perimeter
G1 X98.571 Y106.272 E0.01741 ; perimeter
G1 X98.738 Y105.742 E0.01741 ; perimeter
G1 X98.935 Y105.223 E0.01741 ; perimeter
G1 X99.161 Y104.715 E0.01741 ; perimeter
G1 X99.414 Y104.221 E0.01741 ; perimeter
G1 X99.864 Y103.486 E0.02703 ; perimeter
G1 X100.179 Y103.143 E0.01460 ; perimeter
G1 X100.550 Y102.936 E0.01334 ; perimeter
G1 X100.767 Y102.885 E0.00696 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X100.973 Y102.872 E-0.05466 ; wipe and retract
G1 X101.248 Y102.936 E-0.07442 ; wipe and retract
G1 X101.620 Y103.143 E-0.11230 ; wipe and retract
G1 X101.935 Y103.486 E-0.12288 ; wipe and retract
G1 X102.385 Y104.221 E-0.22745 ; wipe and retract
G1 X102.638 Y104.715 E-0.14656 ; wipe and retract
G1 X102.863 Y105.223 E-0.14655 ; wipe and retract
G1 X103.060 Y105.742 E-0.14655 ; wipe and retract
G1 X103.228 Y106.272 E-0.14656 ; wipe and retract
G1 X103.365 Y106.810 E-0.14654 ; wipe and retract
G1 X103.473 Y107.354 E-0.14656 ; wipe and retract
G1 X103.549 Y107.894 E-0.14366 ; wipe and retract
G1 X103.612 Y109.035 E-0.30181 ; wipe and retract
G1 X103.615 Y110.413 E-0.36350 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X94.201 Y104.312 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X94.383 Y106.038 E0.05441 ; perimeter
G1 X93.378 Y109.443 E0.11130 ; perimeter
G1 X93.241 Y112.790 E0.10505 ; perimeter
G1 X93.252 Y113.305 E0.01613 ; perimeter
G1 X93.330 Y114.335 E0.03241 ; perimeter
G1 X93.200 Y114.853 E0.01674 ; perimeter
G1 X93.141 Y115.470 E0.01944 ; perimeter
G1 X92.951 Y120.940 E0.17161 ; perimeter
G1 X92.960 Y121.301 E0.01130 ; perimeter
G1 X93.044 Y122.276 E0.03069 ; perimeter
G1 X93.008 Y122.456 E0.00577 ; perimeter
G1 X92.378 Y122.449 E0.01975 ; perimeter
G1 X92.023 Y112.720 E0.30524 ; perimeter
G1 X91.978 Y112.230 E0.01543 ; perimeter
G1 X91.819 Y111.326 E0.02877 ; perimeter
G1 X91.902 Y110.601 E0.02288 ; perimeter
G1 X91.890 Y109.452 E0.03604 ; perimeter
G1 X90.883 Y106.038 E0.11159 ; perimeter
G1 X91.066 Y104.312 E0.05441 ; perimeter
G1 X94.141 Y104.312 E0.09642 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X94.383 Y106.038 E-0.45986 ; wipe and retract
G1 X93.378 Y109.443 E-0.93674 ; wipe and retract
G1 X93.241 Y112.787 E-0.88339 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X100.013 Y122.422 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X100.642 Y122.422 E0.01972 ; perimeter
G1 X100.556 Y123.145 E0.02284 ; perimeter
G1 X100.526 Y123.629 E0.01520 ; perimeter
G1 X100.523 Y124.660 E0.03235 ; perimeter
G1 X100.132 Y124.660 E0.01225 ; perimeter
G1 X100.129 Y123.629 E0.03235 ; perimeter
G1 X100.099 Y123.145 E0.01520 ; perimeter
G1 X100.020 Y122.481 E0.02095 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X100.642 Y122.422 E-0.16485 ; wipe and retract
G1 X100.556 Y123.145 E-0.19219 ; wipe and retract
G1 X100.526 Y123.629 E-0.12792 ; wipe and retract
G1 X100.523 Y124.660 E-0.27224 ; wipe and retract
G1 X100.132 Y124.660 E-0.10311 ; wipe and retract
G1 X100.129 Y123.629 E-0.27227 ; wipe and retract
G1 X100.099 Y123.145 E-0.12792 ; wipe and retract
G1 X100.020 Y122.481 E-0.17634 ; wipe and retract
G1 E-0.96315 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X97.556 Y122.248 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X97.261 Y122.468 E0.01156 ; perimeter
G1 X95.319 Y122.468 E0.06087 ; perimeter
G1 X95.024 Y122.248 E0.01156 ; perimeter
G1 X95.319 Y122.027 E0.01156 ; perimeter
G1 X97.261 Y122.027 E0.06087 ; perimeter
G1 X97.507 Y122.213 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X97.261 Y122.468 E-0.09373 ; wipe and retract
G1 X95.319 Y122.468 E-0.51232 ; wipe and retract
G1 X95.024 Y122.248 E-0.09731 ; wipe and retract
G1 X95.319 Y122.027 E-0.09731 ; wipe and retract
G1 X97.261 Y122.027 E-0.51232 ; wipe and retract
G1 X97.507 Y122.213 E-0.08148 ; wipe and retract
G1 E-1.00552 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X95.872 Y114.482 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X95.400 Y114.482 E0.01479 ; perimeter
G1 X95.105 Y114.261 E0.01156 ; perimeter
G1 X95.400 Y114.041 E0.01156 ; perimeter
G1 X95.872 Y114.041 E0.01479 ; perimeter
G1 X96.167 Y114.261 E0.01156 ; perimeter
G1 X95.917 Y114.442 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X95.400 Y114.482 E-0.13678 ; wipe and retract
G1 X95.105 Y114.261 E-0.09729 ; wipe and retract
G1 X95.400 Y114.041 E-0.09729 ; wipe and retract
G1 X95.872 Y114.041 E-0.12444 ; wipe and retract
G1 X96.167 Y114.261 E-0.09728 ; wipe and retract
G1 X95.917 Y114.442 E-0.08151 ; wipe and retract
G1 E-1.76542 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X89.951 Y111.394 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X89.655 Y111.614 E0.01156 ; perimeter
G1 X88.173 Y111.614 E0.04645 ; perimeter
G1 X87.878 Y111.394 E0.01156 ; perimeter
G1 X88.173 Y111.173 E0.01156 ; perimeter
G1 X89.655 Y111.173 E0.04645 ; perimeter
G1 X89.902 Y111.359 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X89.655 Y111.614 E-0.09372 ; wipe and retract
G1 X88.173 Y111.614 E-0.39096 ; wipe and retract
G1 X87.878 Y111.394 E-0.09730 ; wipe and retract
G1 X88.173 Y111.173 E-0.09730 ; wipe and retract
G1 X89.655 Y111.173 E-0.39096 ; wipe and retract
G1 X89.902 Y111.359 E-0.08147 ; wipe and retract
G1 E-1.24829 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.808 Y119.771 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X80.538 Y119.635 E0.00948 ; perimeter
G1 X81.015 Y119.331 E0.01773 ; perimeter
G1 X82.028 Y112.314 E0.22231 ; perimeter
G1 X82.137 Y111.325 E0.03119 ; perimeter
G1 X82.171 Y110.307 E0.03193 ; perimeter
G1 X82.367 Y109.672 E0.02085 ; perimeter
G1 X82.494 Y109.108 E0.01813 ; perimeter
G1 X82.563 Y108.909 E0.00660 ; perimeter
G1 X82.652 Y108.728 E0.00631 ; perimeter
G1 X82.763 Y108.563 E0.00625 ; perimeter
G1 X82.894 Y108.413 E0.00623 ; perimeter
G1 X83.043 Y108.283 E0.00622 ; perimeter
G1 X83.208 Y108.172 E0.00622 ; perimeter
G1 X83.386 Y108.085 E0.00622 ; perimeter
G1 X83.574 Y108.021 E0.00622 ; perimeter
G1 X83.768 Y107.982 E0.00622 ; perimeter
G1 X83.966 Y107.969 E0.00622 ; perimeter
G1 X84.164 Y107.982 E0.00622 ; perimeter
G1 X84.359 Y108.021 E0.00622 ; perimeter
G1 X84.729 Y108.176 E0.01259 ; perimeter
G1 X84.889 Y108.283 E0.00603 ; perimeter
G1 X85.038 Y108.413 E0.00622 ; perimeter
G1 X85.169 Y108.563 E0.00621 ; perimeter
G1 X85.279 Y108.727 E0.00622 ; perimeter
G1 X85.367 Y108.905 E0.00622 ; perimeter
G1 X85.427 Y109.083 E0.00589 ; perimeter
G1 X85.606 Y110.186 E0.03503 ; perimeter
G1 X85.698 Y110.632 E0.01429 ; perimeter
G1 X85.925 Y111.479 E0.02748 ; perimeter
G1 X85.957 Y112.433 E0.02995 ; perimeter
G1 X86.001 Y112.950 E0.01625 ; perimeter
G1 X86.957 Y119.671 E0.21286 ; perimeter
G1 X86.987 Y120.131 E0.01446 ; perimeter
G1 X86.989 Y121.913 E0.05587 ; perimeter
G1 X86.889 Y121.619 E0.00974 ; perimeter
G1 X86.689 Y121.225 E0.01386 ; perimeter
G1 X86.477 Y120.908 E0.01195 ; perimeter
G1 X86.205 Y120.597 E0.01295 ; perimeter
G1 X85.894 Y120.325 E0.01295 ; perimeter
G1 X85.550 Y120.096 E0.01295 ; perimeter
G1 X85.180 Y119.913 E0.01295 ; perimeter
G1 X84.788 Y119.781 E0.01295 ; perimeter
G1 X84.383 Y119.700 E0.01295 ; perimeter
G1 X83.971 Y119.673 E0.01295 ; perimeter
G1 X83.559 Y119.701 E0.01294 ; perimeter
G1 X83.154 Y119.781 E0.01295 ; perimeter
G1 X82.763 Y119.914 E0.01295 ; perimeter
G1 X82.392 Y120.097 E0.01295 ; perimeter
G1 X82.049 Y120.327 E0.01295 ; perimeter
G1 X81.739 Y120.599 E0.01295 ; perimeter
G1 X81.466 Y120.910 E0.01295 ; perimeter
G1 X81.237 Y121.254 E0.01295 ; perimeter
G1 X81.069 Y121.595 E0.01193 ; perimeter
G1 X80.948 Y121.939 E0.01145 ; perimeter
G1 X80.946 Y121.096 E0.02644 ; perimeter
G1 X80.916 Y120.610 E0.01526 ; perimeter
G1 X80.816 Y119.831 E0.02464 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X80.538 Y119.635 E-0.08968 ; wipe and retract
G1 X81.015 Y119.331 E-0.14921 ; wipe and retract
G1 X82.028 Y112.314 E-1.87100 ; wipe and retract
G1 X82.099 Y111.673 E-0.17011 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X79.969 Y110.059 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X78.269 Y109.562 E0.05553 ; perimeter
G1 X78.047 Y109.267 E0.01157 ; perimeter
G1 X78.393 Y109.138 E0.01157 ; perimeter
G1 X80.093 Y109.635 E0.05554 ; perimeter
G1 X80.315 Y109.930 E0.01157 ; perimeter
G1 X80.023 Y110.034 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X78.269 Y109.562 E-0.47945 ; wipe and retract
G1 X78.047 Y109.267 E-0.09736 ; wipe and retract
G1 X78.393 Y109.138 E-0.09736 ; wipe and retract
G1 X80.093 Y109.635 E-0.46740 ; wipe and retract
G1 X80.315 Y109.930 E-0.09736 ; wipe and retract
G1 X80.023 Y110.034 E-0.08159 ; wipe and retract
G1 E-1.07948 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X71.652 Y112.352 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X71.652 Y116.967 E0.14471 ; perimeter
G1 X69.959 Y116.967 E0.05307 ; perimeter
G1 X69.959 Y112.352 E0.14470 ; perimeter
G1 X67.304 Y110.718 E0.09775 ; perimeter
G1 X66.402 Y110.183 E0.03287 ; perimeter
G1 X65.658 Y109.663 E0.02846 ; perimeter
G1 X65.567 Y109.026 E0.02019 ; perimeter
G1 X66.002 Y109.044 E0.01366 ; perimeter
G1 X75.609 Y109.044 E0.30123 ; perimeter
G1 X76.044 Y109.026 E0.01366 ; perimeter
G1 X75.953 Y109.663 E0.02019 ; perimeter
G1 X75.209 Y110.183 E0.02846 ; perimeter
G1 X74.307 Y110.717 E0.03287 ; perimeter
G1 X71.703 Y112.320 E0.09587 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X71.652 Y116.967 E-1.22631 ; wipe and retract
G1 X69.959 Y116.967 E-0.44665 ; wipe and retract
G1 X69.959 Y114.667 E-0.60704 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X63.564 Y109.267 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X63.342 Y109.562 E0.01157 ; perimeter
G1 X61.642 Y110.059 E0.05554 ; perimeter
G1 X61.296 Y109.930 E0.01157 ; perimeter
G1 X61.518 Y109.635 E0.01157 ; perimeter
G1 X63.218 Y109.138 E0.05553 ; perimeter
G1 X63.507 Y109.247 E0.00969 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X63.342 Y109.562 E-0.09379 ; wipe and retract
G1 X61.642 Y110.059 E-0.46740 ; wipe and retract
G1 X61.296 Y109.930 E-0.09736 ; wipe and retract
G1 X61.518 Y109.635 E-0.09737 ; wipe and retract
G1 X63.218 Y109.138 E-0.46739 ; wipe and retract
G1 X63.507 Y109.247 E-0.08154 ; wipe and retract
G1 E-1.09516 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X60.812 Y119.767 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X60.696 Y120.510 E0.02357 ; perimeter
G1 X60.668 Y120.912 E0.01265 ; perimeter
G1 X60.665 Y121.944 E0.03235 ; perimeter
G1 X60.556 Y121.624 E0.01058 ; perimeter
G1 X60.374 Y121.254 E0.01295 ; perimeter
G1 X60.145 Y120.910 E0.01295 ; perimeter
G1 X59.872 Y120.599 E0.01295 ; perimeter
G1 X59.586 Y120.348 E0.01193 ; perimeter
G1 X59.221 Y120.099 E0.01387 ; perimeter
G1 X58.848 Y119.914 E0.01305 ; perimeter
G1 X58.457 Y119.781 E0.01295 ; perimeter
G1 X58.052 Y119.701 E0.01295 ; perimeter
G1 X57.640 Y119.673 E0.01295 ; perimeter
G1 X57.228 Y119.700 E0.01295 ; perimeter
G1 X56.823 Y119.781 E0.01295 ; perimeter
G1 X56.431 Y119.913 E0.01295 ; perimeter
G1 X56.061 Y120.096 E0.01295 ; perimeter
G1 X55.717 Y120.325 E0.01295 ; perimeter
G1 X55.406 Y120.597 E0.01295 ; perimeter
G1 X55.134 Y120.908 E0.01295 ; perimeter
G1 X54.904 Y121.251 E0.01295 ; perimeter
G1 X54.721 Y121.622 E0.01295 ; perimeter
G1 X54.622 Y121.913 E0.00965 ; perimeter
G1 X54.624 Y120.131 E0.05587 ; perimeter
G1 X54.654 Y119.671 E0.01446 ; perimeter
G1 X55.609 Y112.950 E0.21286 ; perimeter
G1 X55.654 Y112.433 E0.01625 ; perimeter
G1 X55.686 Y111.479 E0.02994 ; perimeter
G1 X55.913 Y110.632 E0.02749 ; perimeter
G1 X56.005 Y110.186 E0.01429 ; perimeter
G1 X56.184 Y109.083 E0.03503 ; perimeter
G1 X56.244 Y108.905 E0.00589 ; perimeter
G1 X56.332 Y108.727 E0.00622 ; perimeter
G1 X56.442 Y108.563 E0.00622 ; perimeter
G1 X56.569 Y108.418 E0.00603 ; perimeter
G1 X56.887 Y108.173 E0.01259 ; perimeter
G1 X57.064 Y108.085 E0.00622 ; perimeter
G1 X57.252 Y108.021 E0.00622 ; perimeter
G1 X57.447 Y107.982 E0.00622 ; perimeter
G1 X57.645 Y107.969 E0.00622 ; perimeter
G1 X57.843 Y107.982 E0.00622 ; perimeter
G1 X58.037 Y108.021 E0.00622 ; perimeter
G1 X58.225 Y108.085 E0.00622 ; perimeter
G1 X58.403 Y108.172 E0.00622 ; perimeter
G1 X58.568 Y108.283 E0.00622 ; perimeter
G1 X58.717 Y108.413 E0.00622 ; perimeter
G1 X58.848 Y108.563 E0.00622 ; perimeter
G1 X58.959 Y108.728 E0.00625 ; perimeter
G1 X59.048 Y108.909 E0.00632 ; perimeter
G1 X59.117 Y109.108 E0.00660 ; perimeter
G1 X59.244 Y109.672 E0.01813 ; perimeter
G1 X59.440 Y110.308 E0.02086 ; perimeter
G1 X59.474 Y111.325 E0.03192 ; perimeter
G1 X59.583 Y112.314 E0.03119 ; perimeter
G1 X60.596 Y119.331 E0.22231 ; perimeter
G1 X61.073 Y119.635 E0.01773 ; perimeter
G1 X60.865 Y119.740 E0.00729 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X60.696 Y120.510 E-0.20801 ; wipe and retract
G1 X60.668 Y120.912 E-0.10643 ; wipe and retract
G1 X60.665 Y121.944 E-0.27229 ; wipe and retract
G1 X60.556 Y121.624 E-0.08905 ; wipe and retract
G1 X60.374 Y121.254 E-0.10901 ; wipe and retract
G1 X60.145 Y120.910 E-0.10903 ; wipe and retract
G1 X59.872 Y120.599 E-0.10899 ; wipe and retract
G1 X59.586 Y120.348 E-0.10044 ; wipe and retract
G1 X59.221 Y120.099 E-0.11670 ; wipe and retract
G1 X58.848 Y119.914 E-0.10983 ; wipe and retract
G1 X58.457 Y119.781 E-0.10901 ; wipe and retract
G1 X58.052 Y119.701 E-0.10899 ; wipe and retract
G1 X57.640 Y119.673 E-0.10895 ; wipe and retract
G1 X57.228 Y119.700 E-0.10903 ; wipe and retract
G1 X56.823 Y119.781 E-0.10900 ; wipe and retract
G1 X56.431 Y119.913 E-0.10901 ; wipe and retract
G1 X56.061 Y120.096 E-0.10902 ; wipe and retract
G1 X55.717 Y120.325 E-0.10901 ; wipe and retract
G1 X55.494 Y120.521 E-0.07820 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X53.733 Y111.394 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X53.437 Y111.614 E0.01156 ; perimeter
G1 X51.956 Y111.614 E0.04645 ; perimeter
G1 X51.660 Y111.394 E0.01156 ; perimeter
G1 X51.956 Y111.173 E0.01156 ; perimeter
G1 X53.437 Y111.173 E0.04645 ; perimeter
G1 X53.684 Y111.359 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X53.437 Y111.614 E-0.09372 ; wipe and retract
G1 X51.956 Y111.614 E-0.39096 ; wipe and retract
G1 X51.660 Y111.394 E-0.09730 ; wipe and retract
G1 X51.956 Y111.173 E-0.09730 ; wipe and retract
G1 X53.437 Y111.173 E-0.39096 ; wipe and retract
G1 X53.684 Y111.359 E-0.08147 ; wipe and retract
G1 E-1.24829 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X50.545 Y104.312 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X50.728 Y106.038 E0.05441 ; perimeter
G1 X49.721 Y109.452 E0.11159 ; perimeter
G1 X49.709 Y110.601 E0.03604 ; perimeter
G1 X49.791 Y111.317 E0.02258 ; perimeter
G1 X49.644 Y112.191 E0.02779 ; perimeter
G1 X49.588 Y112.713 E0.01647 ; perimeter
G1 X49.233 Y122.449 E0.30545 ; perimeter
G1 X48.603 Y122.456 E0.01975 ; perimeter
G1 X48.567 Y122.276 E0.00577 ; perimeter
G1 X48.651 Y121.301 E0.03069 ; perimeter
G1 X48.660 Y120.940 E0.01131 ; perimeter
G1 X48.470 Y115.470 E0.17161 ; perimeter
G1 X48.411 Y114.853 E0.01943 ; perimeter
G1 X48.281 Y114.336 E0.01673 ; perimeter
G1 X48.359 Y113.305 E0.03242 ; perimeter
G1 X48.370 Y112.790 E0.01613 ; perimeter
G1 X48.233 Y109.443 E0.10505 ; perimeter
G1 X47.228 Y106.038 E0.11130 ; perimeter
G1 X47.410 Y104.312 E0.05441 ; perimeter
G1 X50.485 Y104.312 E0.09642 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X50.728 Y106.038 E-0.45987 ; wipe and retract
G1 X49.721 Y109.452 E-0.93917 ; wipe and retract
G1 X49.709 Y110.601 E-0.30332 ; wipe and retract
G1 X49.791 Y111.317 E-0.19006 ; wipe and retract
G1 X49.644 Y112.191 E-0.23392 ; wipe and retract
G1 X49.588 Y112.713 E-0.13861 ; wipe and retract
G1 X49.586 Y112.770 E-0.01503 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X46.211 Y114.041 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X46.506 Y114.261 E0.01156 ; perimeter
G1 X46.211 Y114.482 E0.01156 ; perimeter
G1 X45.739 Y114.482 E0.01479 ; perimeter
G1 X45.444 Y114.261 E0.01156 ; perimeter
G1 X45.739 Y114.041 E0.01156 ; perimeter
G1 X46.151 Y114.041 E0.01290 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X46.506 Y114.261 E-0.11038 ; wipe and retract
G1 X46.211 Y114.482 E-0.09729 ; wipe and retract
G1 X45.739 Y114.482 E-0.12444 ; wipe and retract
G1 X45.444 Y114.261 E-0.09728 ; wipe and retract
G1 X45.739 Y114.041 E-0.09728 ; wipe and retract
G1 X46.151 Y114.041 E-0.10861 ; wipe and retract
G1 E-1.76471 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X46.292 Y122.027 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X46.587 Y122.248 E0.01156 ; perimeter
G1 X46.292 Y122.468 E0.01156 ; perimeter
G1 X44.350 Y122.468 E0.06087 ; perimeter
G1 X44.055 Y122.248 E0.01156 ; perimeter
G1 X44.350 Y122.027 E0.01156 ; perimeter
G1 X46.232 Y122.027 E0.05899 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X46.587 Y122.248 E-0.11040 ; wipe and retract
G1 X46.292 Y122.468 E-0.09731 ; wipe and retract
G1 X44.350 Y122.468 E-0.51234 ; wipe and retract
G1 X44.055 Y122.248 E-0.09731 ; wipe and retract
G1 X44.350 Y122.027 E-0.09731 ; wipe and retract
G1 X46.232 Y122.027 E-0.49651 ; wipe and retract
G1 E-0.98883 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X41.598 Y122.422 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X41.512 Y123.145 E0.02283 ; perimeter
G1 X41.482 Y123.629 E0.01520 ; perimeter
G1 X41.479 Y124.660 E0.03235 ; perimeter
G1 X41.088 Y124.660 E0.01225 ; perimeter
G1 X41.085 Y123.629 E0.03235 ; perimeter
G1 X41.055 Y123.145 E0.01520 ; perimeter
G1 X40.969 Y122.422 E0.02284 ; perimeter
G1 X41.538 Y122.426 E0.01785 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X41.512 Y123.145 E-0.18988 ; wipe and retract
G1 X41.482 Y123.629 E-0.12792 ; wipe and retract
G1 X41.479 Y124.660 E-0.27227 ; wipe and retract
G1 X41.088 Y124.660 E-0.10312 ; wipe and retract
G1 X41.085 Y123.629 E-0.27225 ; wipe and retract
G1 X41.055 Y123.145 E-0.12792 ; wipe and retract
G1 X40.969 Y122.422 E-0.19219 ; wipe and retract
G1 X41.538 Y122.426 E-0.15020 ; wipe and retract
G1 E-0.96426 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X54.401 Y129.844 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X54.772 Y129.779 E0.01180 ; perimeter
G1 X54.829 Y129.791 E0.00182 ; perimeter
G1 X54.824 Y132.315 E0.07916 ; perimeter
G1 X56.129 Y132.318 E0.04091 ; perimeter
G1 X56.129 Y133.341 E0.03208 ; perimeter
G1 X55.614 Y133.371 E0.01616 ; perimeter
G1 X54.778 Y133.478 E0.02643 ; perimeter
G1 X53.820 Y133.371 E0.03025 ; perimeter
G1 X53.100 Y133.341 E0.02259 ; perimeter
G1 X53.099 Y132.316 E0.03211 ; perimeter
G1 X54.404 Y132.315 E0.04089 ; perimeter
G1 X54.401 Y129.904 E0.07558 ; perimeter
G1 X54.756 Y128.306 F10800.000 ; move to first perimeter point
G1 F1800.000
G1 X54.536 Y128.011 E0.01156 ; perimeter
G1 X54.536 Y126.369 E0.05146 ; perimeter
G1 X54.756 Y126.074 E0.01157 ; perimeter
G1 X54.977 Y126.369 E0.01156 ; perimeter
G1 X54.977 Y128.011 E0.05146 ; perimeter
G1 X54.791 Y128.257 E0.00968 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X54.536 Y128.011 E-0.09376 ; wipe and retract
G1 X54.536 Y126.369 E-0.43310 ; wipe and retract
G1 X54.756 Y126.074 E-0.09736 ; wipe and retract
G1 X54.977 Y126.369 E-0.09732 ; wipe and retract
G1 X54.977 Y128.011 E-0.43313 ; wipe and retract
G1 X54.791 Y128.257 E-0.08150 ; wipe and retract
G1 E-1.16382 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X62.968 Y120.981 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X62.843 Y120.349 E0.02020 ; perimeter
G1 X64.283 Y121.406 E0.05600 ; perimeter
G1 X64.390 Y121.759 E0.01156 ; perimeter
G1 X64.023 Y121.762 E0.01153 ; perimeter
G1 X63.016 Y121.017 E0.03927 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X62.843 Y120.349 E-0.18200 ; wipe and retract
G1 X64.283 Y121.406 E-0.47132 ; wipe and retract
G1 X64.390 Y121.759 E-0.09731 ; wipe and retract
G1 X64.023 Y121.762 E-0.09705 ; wipe and retract
G1 X63.016 Y121.017 E-0.33052 ; wipe and retract
G1 E-1.22180 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X68.018 Y121.830 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X68.018 Y123.478 E0.05166 ; perimeter
G1 X68.118 Y123.848 E0.01202 ; perimeter
G1 X68.118 Y124.459 E0.01914 ; perimeter
G1 X68.018 Y125.059 E0.01907 ; perimeter
G1 X68.018 Y125.800 E0.02326 ; perimeter
G1 X68.058 Y126.251 E0.01417 ; perimeter
G1 X68.184 Y126.720 E0.01525 ; perimeter
G1 X68.389 Y127.161 E0.01525 ; perimeter
G1 X68.668 Y127.559 E0.01525 ; perimeter
G1 X69.012 Y127.903 E0.01525 ; perimeter
G1 X69.410 Y128.182 E0.01525 ; perimeter
G1 X69.851 Y128.388 E0.01525 ; perimeter
G1 X70.321 Y128.514 E0.01525 ; perimeter
G1 X70.805 Y128.556 E0.01525 ; perimeter
G1 X71.290 Y128.514 E0.01525 ; perimeter
G1 X71.760 Y128.388 E0.01525 ; perimeter
G1 X72.201 Y128.182 E0.01525 ; perimeter
G1 X72.562 Y127.929 E0.01385 ; perimeter
G1 X72.940 Y127.563 E0.01648 ; perimeter
G1 X73.222 Y127.161 E0.01540 ; perimeter
G1 X73.427 Y126.720 E0.01525 ; perimeter
G1 X73.553 Y126.251 E0.01525 ; perimeter
G1 X73.593 Y125.800 E0.01417 ; perimeter
G1 X73.593 Y125.059 E0.02326 ; perimeter
G1 X73.493 Y124.459 E0.01907 ; perimeter
G1 X73.493 Y123.848 E0.01914 ; perimeter
G1 X73.593 Y123.478 E0.01202 ; perimeter
G1 X73.593 Y121.830 E0.05166 ; perimeter
G1 X74.260 Y122.057 E0.02211 ; perimeter
G1 X76.057 Y122.884 E0.06203 ; perimeter
G1 X76.463 Y123.435 E0.02147 ; perimeter
G1 X76.676 Y123.687 E0.01035 ; perimeter
G1 X77.052 Y124.224 E0.02054 ; perimeter
G1 X77.309 Y124.747 E0.01826 ; perimeter
G1 X77.461 Y125.272 E0.01713 ; perimeter
G1 X77.511 Y125.798 E0.01658 ; perimeter
G1 X77.461 Y126.325 E0.01658 ; perimeter
G1 X77.309 Y126.850 E0.01713 ; perimeter
G1 X77.053 Y127.369 E0.01815 ; perimeter
G1 X76.691 Y127.875 E0.01950 ; perimeter
G1 X76.224 Y128.356 E0.02103 ; perimeter
G1 X75.657 Y128.801 E0.02260 ; perimeter
G1 X74.999 Y129.199 E0.02411 ; perimeter
G1 X74.261 Y129.539 E0.02547 ; perimeter
G1 X73.457 Y129.812 E0.02663 ; perimeter
G1 X72.592 Y130.015 E0.02785 ; perimeter
G1 X70.805 Y130.315 E0.05681 ; perimeter
G1 X69.019 Y130.015 E0.05681 ; perimeter
G1 X68.154 Y129.812 E0.02785 ; perimeter
G1 X67.350 Y129.539 E0.02663 ; perimeter
G1 X66.612 Y129.199 E0.02547 ; perimeter
G1 X65.954 Y128.801 E0.02411 ; perimeter
G1 X65.387 Y128.356 E0.02260 ; perimeter
G1 X64.920 Y127.875 E0.02103 ; perimeter
G1 X64.558 Y127.369 E0.01950 ; perimeter
G1 X64.302 Y126.850 E0.01815 ; perimeter
G1 X64.150 Y126.325 E0.01713 ; perimeter
G1 X64.100 Y125.798 E0.01658 ; perimeter
G1 X64.150 Y125.272 E0.01658 ; perimeter
G1 X64.302 Y124.747 E0.01713 ; perimeter
G1 X64.559 Y124.224 E0.01826 ; perimeter
G1 X64.935 Y123.687 E0.02054 ; perimeter
G1 X65.148 Y123.435 E0.01035 ; perimeter
G1 X65.553 Y122.884 E0.02147 ; perimeter
G1 X67.351 Y122.057 E0.06203 ; perimeter
G1 X67.962 Y121.850 E0.02023 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X68.018 Y123.478 E-0.42998 ; wipe and retract
G1 X68.118 Y123.848 E-0.10114 ; wipe and retract
G1 X68.118 Y124.459 E-0.16105 ; wipe and retract
G1 X68.018 Y125.059 E-0.16052 ; wipe and retract
G1 X68.018 Y125.800 E-0.19578 ; wipe and retract
G1 X68.058 Y126.251 E-0.11925 ; wipe and retract
G1 X68.184 Y126.720 E-0.12834 ; wipe and retract
G1 X68.389 Y127.161 E-0.12833 ; wipe and retract
G1 X68.668 Y127.559 E-0.12834 ; wipe and retract
G1 X69.012 Y127.903 E-0.12834 ; wipe and retract
G1 X69.410 Y128.182 E-0.12834 ; wipe and retract
G1 X69.851 Y128.388 E-0.12835 ; wipe and retract
G1 X70.321 Y128.514 E-0.12833 ; wipe and retract
G1 X70.805 Y128.556 E-0.12834 ; wipe and retract
G1 X71.128 Y128.528 E-0.08557 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X77.221 Y121.759 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X77.328 Y121.406 E0.01156 ; perimeter
G1 X78.763 Y120.352 E0.05583 ; perimeter
G1 X78.642 Y120.982 E0.02011 ; perimeter
G1 X77.588 Y121.762 E0.04111 ; perimeter
G1 X77.281 Y121.758 E0.00965 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X77.328 Y121.406 E-0.09374 ; wipe and retract
G1 X78.763 Y120.352 E-0.46989 ; wipe and retract
G1 X78.642 Y120.982 E-0.16922 ; wipe and retract
G1 X77.588 Y121.762 E-0.34596 ; wipe and retract
G1 X77.281 Y121.758 E-0.08122 ; wipe and retract
G1 E-1.23997 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X86.634 Y126.369 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X86.855 Y126.074 E0.01157 ; perimeter
G1 X87.075 Y126.369 E0.01157 ; perimeter
G1 X87.075 Y128.720 E0.07371 ; perimeter
G1 X86.855 Y129.016 E0.01157 ; perimeter
G1 X86.634 Y128.720 E0.01157 ; perimeter
G1 X86.634 Y126.429 E0.07184 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X86.855 Y126.074 E-0.11046 ; wipe and retract
G1 X87.075 Y126.369 E-0.09740 ; wipe and retract
G1 X87.075 Y128.720 E-0.62040 ; wipe and retract
G1 X86.855 Y129.016 E-0.09738 ; wipe and retract
G1 X86.634 Y128.720 E-0.09738 ; wipe and retract
G1 X86.634 Y126.429 E-0.60460 ; wipe and retract
G1 E-0.77239 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X89.974 Y131.422 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X88.252 Y131.431 E0.05400 ; perimeter
G1 X87.761 Y131.460 E0.01543 ; perimeter
G1 X86.852 Y131.567 E0.02869 ; perimeter
G1 X85.958 Y131.460 E0.02824 ; perimeter
G1 X85.475 Y131.431 E0.01517 ; perimeter
G1 X83.769 Y131.422 E0.05348 ; perimeter
G1 X83.769 Y131.763 E0.01068 ; perimeter
G1 X82.224 Y131.770 E0.04845 ; perimeter
G1 X82.186 Y131.513 E0.00817 ; perimeter
G1 X82.224 Y131.253 E0.00822 ; perimeter
G1 X85.408 Y131.260 E0.09984 ; perimeter
G1 X85.923 Y131.230 E0.01616 ; perimeter
G1 X86.854 Y131.125 E0.02936 ; perimeter
G1 X87.790 Y131.231 E0.02954 ; perimeter
G1 X88.308 Y131.260 E0.01627 ; perimeter
G1 X91.522 Y131.254 E0.10078 ; perimeter
G1 X91.561 Y131.514 E0.00824 ; perimeter
G1 X91.522 Y131.767 E0.00802 ; perimeter
G1 X89.974 Y131.761 E0.04854 ; perimeter
G1 X89.974 Y131.482 E0.00875 ; perimeter
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X88.252 Y131.431 E-0.45471 ; wipe and retract
G1 X87.761 Y131.460 E-0.12983 ; wipe and retract
G1 X86.852 Y131.567 E-0.24150 ; wipe and retract
G1 X85.958 Y131.460 E-0.23768 ; wipe and retract
G1 X85.475 Y131.431 E-0.12770 ; wipe and retract
G1 X83.769 Y131.422 E-0.45008 ; wipe and retract
G1 X83.769 Y131.763 E-0.08987 ; wipe and retract
G1 X82.224 Y131.770 E-0.40778 ; wipe and retract
G1 X82.186 Y131.513 E-0.06880 ; wipe and retract
G1 X82.224 Y131.253 E-0.06921 ; wipe and retract
G1 X82.235 Y131.253 E-0.00283 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X103.812 Y140.305 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:External perimeter
G1 F1800.000
G1 X102.921 Y140.375 E0.02800 ; perimeter
G1 X38.690 Y140.375 E2.01395 ; perimeter
G1 X37.799 Y140.305 E0.02801 ; perimeter
G1 X36.946 Y140.101 E0.02750 ; perimeter
G1 X36.136 Y139.765 E0.02750 ; perimeter
G1 X35.388 Y139.307 E0.02750 ; perimeter
G1 X34.722 Y138.737 E0.02750 ; perimeter
G1 X34.152 Y138.070 E0.02750 ; perimeter
G1 X33.694 Y137.323 E0.02750 ; perimeter
G1 X33.358 Y136.512 E0.02750 ; perimeter
G1 X33.153 Y135.660 E0.02750 ; perimeter
G1 X33.083 Y134.769 E0.02800 ; perimeter
G1 X33.083 Y75.231 E1.86679 ; perimeter
G1 X33.153 Y74.340 E0.02800 ; perimeter
G1 X33.358 Y73.488 E0.02750 ; perimeter
G1 X33.694 Y72.677 E0.02750 ; perimeter
G1 X34.152 Y71.930 E0.02750 ; perimeter
G1 X34.722 Y71.263 E0.02750 ; perimeter
G1 X35.388 Y70.693 E0.02750 ; perimeter
G1 X36.136 Y70.235 E0.02750 ; perimeter
G1 X36.946 Y69.899 E0.02750 ; perimeter
G1 X37.799 Y69.695 E0.02750 ; perimeter
G1 X38.690 Y69.625 E0.02801 ; perimeter
G1 X102.973 Y69.629 E2.01555 ; perimeter
G1 X103.812 Y69.695 E0.02639 ; perimeter
G1 X104.665 Y69.899 E0.02750 ; perimeter
G1 X105.475 Y70.235 E0.02750 ; perimeter
G1 X106.223 Y70.693 E0.02750 ; perimeter
G1 X106.889 Y71.263 E0.02750 ; perimeter
G1 X107.459 Y71.930 E0.02750 ; perimeter
G1 X107.917 Y72.677 E0.02750 ; perimeter
G1 X108.253 Y73.488 E0.02750 ; perimeter
G1 X108.457 Y74.340 E0.02750 ; perimeter
G1 X108.528 Y75.231 E0.02800 ; perimeter
G1 X108.528 Y134.769 E1.86679 ; perimeter
G1 X108.457 Y135.660 E0.02800 ; perimeter
G1 X108.253 Y136.512 E0.02750 ; perimeter
G1 X107.917 Y137.323 E0.02750 ; perimeter
G1 X107.459 Y138.070 E0.02750 ; perimeter
G1 X106.889 Y138.737 E0.02750 ; perimeter
G1 X106.223 Y139.307 E0.02750 ; perimeter
G1 X105.475 Y139.765 E0.02750 ; perimeter
G1 X104.665 Y140.101 E0.02750 ; perimeter
G1 X103.870 Y140.291 E0.02562 ; perimeter
G1 X103.560 Y139.994 F10800.000 ; move inwards before travel
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X102.921 Y140.375 E-0.25134 ; wipe and retract
G1 X95.234 Y140.375 E-2.02866 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X91.363 Y131.563 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X91.302 Y131.510 E0.00090 ; infill
G1 X90.163 Y131.509 E0.01274 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X91.302 Y131.510 E-0.30055 ; wipe and retract
G1 X91.363 Y131.563 E-0.02128 ; wipe and retract
G1 E-2.07816 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X83.581 Y131.510 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X82.447 Y131.511 E0.01308 ; infill
G1 X82.384 Y131.566 E0.00095 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X82.447 Y131.511 E-0.02180 ; wipe and retract
G1 X83.581 Y131.510 E-0.29926 ; wipe and retract
G1 E-2.07894 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X86.855 Y137.600 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X86.855 Y134.396 E0.01635 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X86.855 Y137.600 E-0.84560 ; wipe and retract
G1 E-1.55440 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X86.780 Y131.346 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X86.927 Y131.346 E0.00075 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X86.780 Y131.346 E-0.03874 ; wipe and retract
G1 E-2.36126 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X86.855 Y128.692 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X86.855 Y126.397 E0.01086 ; infill
G1 X86.910 Y124.686 F10800.000 ; move to first infill point
G1 F1800.000
G1 X86.948 Y124.480 E0.00162 ; infill
G1 X86.986 Y124.270 E0.00241 ; infill
G1 X87.007 Y124.135 E0.00196 ; infill
G1 X87.030 Y123.931 E0.00362 ; infill
G1 X87.053 Y123.728 E0.00405 ; infill
G1 X87.059 Y122.806 E0.01821 ; infill
G1 X87.046 Y122.417 E0.00855 ; infill
G1 X87.014 Y122.100 E0.00787 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X87.046 Y122.417 E-0.08406 ; wipe and retract
G1 E-2.31594 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.004 Y109.839 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X78.358 Y109.359 E0.00812 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X80.004 Y109.839 E-0.45240 ; wipe and retract
G1 E-1.94760 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X75.696 Y109.704 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X75.319 Y109.327 E0.01711 ; infill
G1 X74.774 Y109.327 E0.01748 ; infill
G1 X75.254 Y109.807 E0.02176 ; infill
G1 X74.925 Y110.023 E0.01262 ; infill
G1 X74.229 Y109.327 E0.03157 ; infill
G1 X73.683 Y109.327 E0.01748 ; infill
G1 X74.582 Y110.226 E0.04076 ; infill
G1 X74.240 Y110.428 E0.01276 ; infill
G1 X73.138 Y109.327 E0.04995 ; infill
G1 X72.593 Y109.327 E0.01748 ; infill
G1 X73.901 Y110.635 E0.05932 ; infill
G1 X73.564 Y110.843 E0.01270 ; infill
G1 X72.048 Y109.327 E0.06873 ; infill
G1 X71.503 Y109.327 E0.01748 ; infill
G1 X73.227 Y111.050 E0.07815 ; infill
G1 X72.889 Y111.258 E0.01270 ; infill
G1 X70.957 Y109.327 E0.08757 ; infill
G1 X70.412 Y109.327 E0.01748 ; infill
G1 X72.552 Y111.466 E0.09698 ; infill
G1 X72.214 Y111.674 E0.01270 ; infill
G1 X69.867 Y109.327 E0.10640 ; infill
G1 X69.322 Y109.327 E0.01748 ; infill
G1 X71.877 Y111.881 E0.11582 ; infill
G1 X71.539 Y112.089 E0.01270 ; infill
G1 X68.777 Y109.327 E0.12523 ; infill
G1 X68.232 Y109.327 E0.01748 ; infill
G1 X71.369 Y112.464 E0.14224 ; infill
G1 X71.369 Y113.009 E0.01747 ; infill
G1 X67.686 Y109.327 E0.16696 ; infill
G1 X67.141 Y109.327 E0.01748 ; infill
G1 X71.369 Y113.555 E0.19167 ; infill
G1 X71.369 Y114.100 E0.01747 ; infill
G1 X70.242 Y112.972 E0.05111 ; infill
G1 X70.242 Y113.518 E0.01748 ; infill
G1 X71.369 Y114.645 E0.05111 ; infill
G1 X71.369 Y115.190 E0.01747 ; infill
G1 X70.242 Y114.063 E0.05110 ; infill
G1 X70.242 Y114.608 E0.01748 ; infill
G1 X71.369 Y115.735 E0.05110 ; infill
G1 X71.369 Y116.280 E0.01747 ; infill
G1 X70.242 Y115.153 E0.05110 ; infill
G1 X70.242 Y115.698 E0.01748 ; infill
G1 X71.228 Y116.684 E0.04469 ; infill
G1 X70.683 Y116.684 E0.01748 ; infill
G1 X70.072 Y116.074 E0.02767 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.683 Y116.684 E-0.22780 ; wipe and retract
G1 X71.228 Y116.684 E-0.14387 ; wipe and retract
G1 X70.242 Y115.698 E-0.36794 ; wipe and retract
G1 X70.242 Y115.153 E-0.14388 ; wipe and retract
G1 X71.369 Y116.280 E-0.42065 ; wipe and retract
G1 X71.369 Y115.735 E-0.14386 ; wipe and retract
G1 X70.242 Y114.608 E-0.42068 ; wipe and retract
G1 X70.242 Y114.063 E-0.14388 ; wipe and retract
G1 X70.958 Y114.779 E-0.26744 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X60.626 Y124.428 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X60.645 Y124.323 E0.00075 ; infill
G1 X60.664 Y124.218 E0.00106 ; infill
G1 X60.683 Y124.113 E0.00137 ; infill
G1 X60.705 Y123.919 E0.00322 ; infill
G1 X60.727 Y123.725 E0.00398 ; infill
G1 X60.728 Y122.805 E0.01870 ; infill
G1 X60.716 Y122.418 E0.00875 ; infill
G1 X60.688 Y122.131 E0.00720 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X60.716 Y122.418 E-0.07622 ; wipe and retract
G1 E-2.32378 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X63.130 Y120.830 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X64.128 Y121.567 E0.00588 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X63.130 Y120.830 E-0.32749 ; wipe and retract
G1 E-2.07251 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X67.905 Y122.805 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X67.432 Y122.331 E0.02155 ; infill
G1 X67.057 Y122.504 E0.01328 ; infill
G1 X67.736 Y123.183 E0.03089 ; infill
G1 X67.736 Y123.516 E0.01072 ; infill
G1 X67.815 Y123.809 E0.00979 ; infill
G1 X66.682 Y122.676 E0.05157 ; infill
G1 X66.307 Y122.849 E0.01328 ; infill
G1 X67.836 Y124.377 E0.06957 ; infill
G1 X67.766 Y124.855 E0.01553 ; infill
G1 X65.932 Y123.021 E0.08345 ; infill
G1 X65.738 Y123.110 E0.00687 ; infill
G1 X65.626 Y123.262 E0.00608 ; infill
G1 X67.736 Y125.372 E0.09601 ; infill
G1 X67.746 Y125.929 E0.01795 ; infill
G1 X65.394 Y123.578 E0.10703 ; infill
G1 X65.147 Y123.878 E0.01251 ; infill
G1 X68.120 Y126.851 E0.13530 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X65.147 Y123.878 E-1.10948 ; wipe and retract
G1 X65.394 Y123.578 E-0.10261 ; wipe and retract
G1 X67.746 Y125.929 E-0.87768 ; wipe and retract
G1 X67.736 Y125.372 E-0.14716 ; wipe and retract
G1 X67.620 Y125.257 E-0.04308 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X64.565 Y127.127 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X65.608 Y128.170 E0.04747 ; infill
G1 X66.115 Y128.568 E0.02074 ; infill
G1 X66.744 Y128.949 E0.02368 ; infill
G1 X67.096 Y129.111 E0.01244 ; infill
G1 X64.500 Y126.515 E0.11814 ; infill
G1 X64.429 Y126.272 E0.00814 ; infill
G1 X64.390 Y125.858 E0.01338 ; infill
G1 X67.990 Y129.458 E0.16384 ; infill
G1 X68.232 Y129.540 E0.00821 ; infill
G1 X68.738 Y129.659 E0.01674 ; infill
G1 X64.427 Y125.348 E0.19619 ; infill
G1 X64.547 Y124.920 E0.01430 ; infill
G1 X69.423 Y129.796 E0.22193 ; infill
G1 X70.081 Y129.906 E0.02147 ; infill
G1 X64.718 Y124.543 E0.24408 ; infill
G1 X64.804 Y124.369 E0.00626 ; infill
G1 X64.922 Y124.200 E0.00663 ; infill
G1 X70.905 Y130.183 E0.27232 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X64.922 Y124.200 E-2.23304 ; wipe and retract
G1 X64.820 Y124.346 E-0.04696 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X69.721 Y128.452 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X71.226 Y129.957 E0.06852 ; infill
G1 X71.695 Y129.879 E0.01529 ; infill
G1 X70.642 Y128.826 E0.04792 ; infill
G1 X70.805 Y128.840 E0.00528 ; infill
G1 X71.172 Y128.808 E0.01183 ; infill
G1 X72.164 Y129.800 E0.04515 ; infill
G1 X72.627 Y129.716 E0.01516 ; infill
G1 X71.627 Y128.716 E0.04551 ; infill
G1 X71.857 Y128.655 E0.00765 ; infill
G1 X72.032 Y128.573 E0.00620 ; infill
G1 X73.071 Y129.612 E0.04729 ; infill
G1 X73.503 Y129.498 E0.01441 ; infill
G1 X72.396 Y128.391 E0.05039 ; infill
G1 X72.718 Y128.165 E0.01265 ; infill
G1 X73.912 Y129.359 E0.05433 ; infill
G1 X74.307 Y129.207 E0.01362 ; infill
G1 X73.000 Y127.899 E0.05950 ; infill
G1 X73.156 Y127.748 E0.00701 ; infill
G1 X73.255 Y127.607 E0.00553 ; infill
G1 X74.682 Y129.034 E0.06494 ; infill
G1 X74.867 Y128.949 E0.00655 ; infill
G1 X75.039 Y128.844 E0.00650 ; infill
G1 X73.477 Y127.282 E0.07110 ; infill
G1 X73.651 Y126.909 E0.01325 ; infill
G1 X75.381 Y128.638 E0.07870 ; infill
G1 X75.699 Y128.409 E0.01262 ; infill
G1 X73.781 Y126.492 E0.08727 ; infill
G1 X73.833 Y126.300 E0.00639 ; infill
G1 X73.857 Y126.020 E0.00903 ; infill
G1 X76.005 Y128.168 E0.09777 ; infill
G1 X76.035 Y128.146 E0.00119 ; infill
G1 X76.278 Y127.894 E0.01128 ; infill
G1 X73.875 Y125.491 E0.10937 ; infill
G1 X73.875 Y125.035 E0.01467 ; infill
G1 X73.857 Y124.925 E0.00358 ; infill
G1 X76.537 Y127.605 E0.12194 ; infill
G1 X76.765 Y127.286 E0.01262 ; infill
G1 X73.775 Y124.296 E0.13606 ; infill
G1 X73.775 Y123.886 E0.01321 ; infill
G1 X73.804 Y123.778 E0.00359 ; infill
G1 X76.955 Y126.929 E0.14338 ; infill
G1 X77.044 Y126.747 E0.00651 ; infill
G1 X77.106 Y126.533 E0.00719 ; infill
G1 X73.875 Y123.302 E0.14704 ; infill
G1 X73.875 Y122.754 E0.01761 ; infill
G1 X77.200 Y126.079 E0.15130 ; infill
G1 X77.227 Y125.798 E0.00907 ; infill
G1 X77.201 Y125.533 E0.00858 ; infill
G1 X73.903 Y122.235 E0.15011 ; infill
G1 X74.155 Y122.320 E0.00858 ; infill
G1 X74.860 Y122.644 E0.02496 ; infill
G1 X77.284 Y125.068 E0.11032 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.860 Y122.644 E-0.90459 ; wipe and retract
G1 X74.155 Y122.320 E-0.20470 ; wipe and retract
G1 X73.903 Y122.235 E-0.07034 ; wipe and retract
G1 X76.851 Y125.183 E-1.10036 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X77.482 Y121.567 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X78.479 Y120.831 E0.00650 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X77.482 Y121.567 E-0.32708 ; wipe and retract
G1 E-2.07292 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.985 Y124.428 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X80.966 Y124.323 E0.00075 ; infill
G1 X80.947 Y124.218 E0.00106 ; infill
G1 X80.928 Y124.113 E0.00137 ; infill
G1 X80.906 Y123.919 E0.00322 ; infill
G1 X80.884 Y123.725 E0.00396 ; infill
G1 X80.883 Y122.805 E0.01863 ; infill
G1 X80.896 Y122.419 E0.00871 ; infill
G1 X80.924 Y122.127 E0.00730 ; infill
G1 X80.983 Y120.242 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X81.352 Y120.611 E0.01640 ; infill
G1 X81.611 Y120.335 E0.01186 ; infill
G1 X81.100 Y119.825 E0.02266 ; infill
G1 X81.075 Y119.629 E0.00621 ; infill
G1 X81.277 Y119.500 E0.00751 ; infill
G1 X81.281 Y119.472 E0.00091 ; infill
G1 X81.897 Y120.088 E0.02737 ; infill
G1 X82.217 Y119.874 E0.01208 ; infill
G1 X81.348 Y119.005 E0.03858 ; infill
G1 X81.415 Y118.539 E0.01480 ; infill
G1 X82.571 Y119.694 E0.05128 ; infill
G1 X82.960 Y119.549 E0.01303 ; infill
G1 X81.483 Y118.072 E0.06556 ; infill
G1 X81.550 Y117.606 E0.01480 ; infill
G1 X83.391 Y119.446 E0.08170 ; infill
G1 X83.522 Y119.420 E0.00421 ; infill
G1 X83.875 Y119.396 E0.01110 ; infill
G1 X81.618 Y117.139 E0.10021 ; infill
G1 X81.685 Y116.673 E0.01480 ; infill
G1 X84.435 Y119.422 E0.12207 ; infill
G1 X84.862 Y119.507 E0.01367 ; infill
G1 X85.151 Y119.605 E0.00960 ; infill
G1 X81.752 Y116.206 E0.15090 ; infill
G1 X81.820 Y115.739 E0.01480 ; infill
G1 X86.705 Y120.625 E0.21687 ; infill
G1 X86.701 Y120.087 E0.01688 ; infill
G1 X81.887 Y115.273 E0.21371 ; infill
G1 X81.954 Y114.806 E0.01480 ; infill
G1 X86.647 Y119.499 E0.20832 ; infill
G1 X86.558 Y118.876 E0.01973 ; infill
G1 X82.022 Y114.340 E0.20140 ; infill
G1 X82.089 Y113.873 E0.01480 ; infill
G1 X86.470 Y118.254 E0.19448 ; infill
G1 X86.381 Y117.632 E0.01973 ; infill
G1 X82.156 Y113.407 E0.18756 ; infill
G1 X82.224 Y112.940 E0.01480 ; infill
G1 X86.293 Y117.009 E0.18064 ; infill
G1 X86.204 Y116.387 E0.01973 ; infill
G1 X82.291 Y112.474 E0.17373 ; infill
G1 X82.348 Y111.997 E0.01508 ; infill
G1 X86.116 Y115.765 E0.16728 ; infill
G1 X86.027 Y115.142 E0.01973 ; infill
G1 X82.401 Y111.515 E0.16100 ; infill
G1 X82.430 Y111.011 E0.01585 ; infill
G1 X85.939 Y114.520 E0.15576 ; infill
G1 X85.851 Y113.897 E0.01973 ; infill
G1 X82.448 Y110.494 E0.15107 ; infill
G1 X82.452 Y110.355 E0.00439 ; infill
G1 X82.544 Y110.057 E0.00978 ; infill
G1 X85.762 Y113.275 E0.14286 ; infill
G1 X85.694 Y112.673 E0.01902 ; infill
G1 X82.663 Y109.642 E0.13454 ; infill
G1 X82.761 Y109.206 E0.01403 ; infill
G1 X85.663 Y112.109 E0.12884 ; infill
G1 X85.645 Y111.556 E0.01735 ; infill
G1 X82.922 Y108.833 E0.12088 ; infill
G1 X82.988 Y108.735 E0.00371 ; infill
G1 X83.170 Y108.547 E0.00822 ; infill
G1 X85.461 Y110.838 E0.10170 ; infill
G1 X85.316 Y110.159 E0.02180 ; infill
G1 X83.501 Y108.344 E0.08056 ; infill
G1 X83.647 Y108.295 E0.00485 ; infill
G1 X83.944 Y108.254 E0.00942 ; infill
G1 X85.417 Y109.727 E0.06538 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X83.944 Y108.254 E-0.54964 ; wipe and retract
G1 X83.647 Y108.295 E-0.07919 ; wipe and retract
G1 X83.501 Y108.344 E-0.04078 ; wipe and retract
G1 X85.316 Y110.159 E-0.67727 ; wipe and retract
G1 X85.461 Y110.838 E-0.18326 ; wipe and retract
G1 X83.451 Y108.829 E-0.74986 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X88.202 Y111.394 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X89.627 Y111.394 E0.00674 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X88.202 Y111.394 E-0.37609 ; wipe and retract
G1 E-2.02391 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X95.477 Y114.261 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X95.844 Y114.261 E0.00173 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X95.477 Y114.261 E-0.09665 ; wipe and retract
G1 E-2.30335 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X99.881 Y118.881 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X98.468 Y117.468 E0.06269 ; infill
G1 X98.467 Y116.933 E0.01678 ; infill
G1 X100.245 Y118.711 E0.07890 ; infill
G1 X100.779 Y118.711 E0.01674 ; infill
G1 X98.466 Y116.398 E0.10263 ; infill
G1 X98.464 Y115.863 E0.01678 ; infill
G1 X101.312 Y118.711 E0.12636 ; infill
G1 X101.846 Y118.711 E0.01674 ; infill
G1 X98.444 Y115.310 E0.15093 ; infill
G1 X98.384 Y114.715 E0.01875 ; infill
G1 X102.345 Y118.677 E0.17578 ; infill
G1 X102.529 Y118.637 E0.00591 ; infill
G1 X102.736 Y118.534 E0.00725 ; infill
G1 X98.344 Y114.142 E0.19487 ; infill
G1 X98.399 Y113.663 E0.01512 ; infill
G1 X103.034 Y118.299 E0.20567 ; infill
G1 X103.198 Y118.084 E0.00848 ; infill
G1 X103.250 Y117.981 E0.00361 ; infill
G1 X98.444 Y113.175 E0.21324 ; infill
G1 X98.464 Y112.661 E0.01613 ; infill
G1 X103.330 Y117.527 E0.21590 ; infill
G1 X103.331 Y116.994 E0.01671 ; infill
G1 X98.465 Y112.128 E0.21591 ; infill
G1 X98.466 Y111.596 E0.01672 ; infill
G1 X103.332 Y116.462 E0.21591 ; infill
G1 X103.333 Y115.929 E0.01671 ; infill
G1 X98.466 Y111.063 E0.21592 ; infill
G1 X98.467 Y110.530 E0.01672 ; infill
G1 X103.334 Y115.396 E0.21593 ; infill
G1 X103.334 Y114.864 E0.01671 ; infill
G1 X98.468 Y109.997 E0.21593 ; infill
G1 X98.469 Y109.464 E0.01672 ; infill
G1 X103.353 Y114.348 E0.21670 ; infill
G1 X103.398 Y113.860 E0.01539 ; infill
G1 X98.475 Y108.937 E0.21842 ; infill
G1 X98.503 Y108.432 E0.01588 ; infill
G1 X103.454 Y113.382 E0.21965 ; infill
G1 X103.469 Y113.256 E0.00397 ; infill
G1 X103.417 Y112.812 E0.01404 ; infill
G1 X98.531 Y107.926 E0.21678 ; infill
G1 X98.597 Y107.458 E0.01484 ; infill
G1 X103.357 Y112.218 E0.21120 ; infill
G1 X103.334 Y111.662 E0.01745 ; infill
G1 X98.682 Y107.010 E0.20643 ; infill
G1 X98.709 Y106.872 E0.00439 ; infill
G1 X98.784 Y106.578 E0.00952 ; infill
G1 X103.333 Y111.127 E0.20184 ; infill
G1 X103.332 Y110.593 E0.01677 ; infill
G1 X98.902 Y106.162 E0.19657 ; infill
G1 X99.034 Y105.761 E0.01327 ; infill
G1 X103.331 Y110.058 E0.19068 ; infill
G1 X103.330 Y109.523 E0.01677 ; infill
G1 X99.180 Y105.374 E0.18413 ; infill
G1 X99.343 Y105.002 E0.01272 ; infill
G1 X103.326 Y108.986 E0.17675 ; infill
G1 X103.295 Y108.421 E0.01776 ; infill
G1 X99.516 Y104.642 E0.16767 ; infill
G1 X99.700 Y104.292 E0.01240 ; infill
G1 X103.257 Y107.849 E0.15782 ; infill
G1 X103.157 Y107.216 E0.02010 ; infill
G1 X99.897 Y103.955 E0.14468 ; infill
G1 X100.110 Y103.635 E0.01207 ; infill
G1 X103.001 Y106.526 E0.12826 ; infill
G1 X102.762 Y105.753 E0.02537 ; infill
G1 X100.369 Y103.361 E0.10617 ; infill
G1 X100.653 Y103.202 E0.01021 ; infill
G1 X100.727 Y103.185 E0.00237 ; infill
G1 X102.719 Y105.177 E0.08841 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X100.727 Y103.185 E-0.74359 ; wipe and retract
G1 X100.653 Y103.202 E-0.01992 ; wipe and retract
G1 X100.369 Y103.361 E-0.08592 ; wipe and retract
G1 X102.762 Y105.753 E-0.89299 ; wipe and retract
G1 X103.001 Y106.526 E-0.21336 ; wipe and retract
G1 X102.132 Y105.657 E-0.32422 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X105.850 Y122.247 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X103.423 Y122.247 E0.01266 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X105.850 Y122.247 E-0.64041 ; wipe and retract
G1 E-1.75959 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X100.328 Y123.401 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X100.328 Y123.123 E0.00188 ; infill
G1 X100.328 Y122.869 E0.00277 ; infill
G1 X100.328 Y122.614 E0.00382 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X100.328 Y122.869 E-0.06713 ; wipe and retract
G1 E-2.33287 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X97.232 Y122.248 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X95.347 Y122.248 E0.00892 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X97.232 Y122.248 E-0.49747 ; wipe and retract
G1 E-1.90253 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X92.707 Y122.264 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X92.637 Y120.936 E0.02780 ; infill
G1 X92.636 Y120.378 E0.01323 ; infill
G1 X92.634 Y119.820 E0.01479 ; infill
G1 X92.633 Y119.262 E0.01635 ; infill
G1 X92.909 Y118.899 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X92.517 Y118.507 E0.01794 ; infill
G1 X92.496 Y117.935 E0.01853 ; infill
G1 X92.763 Y118.202 E0.01222 ; infill
G1 X92.781 Y117.670 E0.01725 ; infill
G1 X92.475 Y117.364 E0.01402 ; infill
G1 X92.455 Y116.792 E0.01853 ; infill
G1 X92.800 Y117.137 E0.01581 ; infill
G1 X92.818 Y116.605 E0.01725 ; infill
G1 X92.434 Y116.220 E0.01761 ; infill
G1 X92.413 Y115.649 E0.01853 ; infill
G1 X92.837 Y116.072 E0.01941 ; infill
G1 X92.855 Y115.540 E0.01725 ; infill
G1 X92.392 Y115.077 E0.02121 ; infill
G1 X92.371 Y114.505 E0.01853 ; infill
G1 X92.899 Y115.033 E0.02415 ; infill
G1 X92.920 Y114.805 E0.00741 ; infill
G1 X92.981 Y114.564 E0.00803 ; infill
G1 X92.350 Y113.934 E0.02888 ; infill
G1 X92.330 Y113.362 E0.01853 ; infill
G1 X93.026 Y114.058 E0.03188 ; infill
G1 X92.980 Y113.462 E0.01937 ; infill
G1 X92.309 Y112.790 E0.03074 ; infill
G1 X92.258 Y112.188 E0.01956 ; infill
G1 X92.960 Y112.891 E0.03216 ; infill
G1 X92.976 Y112.355 E0.01734 ; infill
G1 X92.140 Y111.520 E0.03827 ; infill
G1 X92.104 Y111.318 E0.00665 ; infill
G1 X92.144 Y110.973 E0.01124 ; infill
G1 X92.997 Y111.826 E0.03909 ; infill
G1 X93.019 Y111.297 E0.01715 ; infill
G1 X92.183 Y110.461 E0.03828 ; infill
G1 X92.178 Y109.905 E0.01802 ; infill
G1 X93.041 Y110.768 E0.03954 ; infill
G1 X93.063 Y110.239 E0.01715 ; infill
G1 X92.147 Y109.324 E0.04192 ; infill
G1 X91.917 Y108.542 E0.02639 ; infill
G1 X93.084 Y109.710 E0.05347 ; infill
G1 X93.097 Y109.396 E0.01017 ; infill
G1 X93.148 Y109.223 E0.00585 ; infill
G1 X91.686 Y107.761 E0.06697 ; infill
G1 X91.456 Y106.980 E0.02639 ; infill
G1 X93.274 Y108.798 E0.08328 ; infill
G1 X93.399 Y108.372 E0.01436 ; infill
G1 X91.225 Y106.198 E0.09959 ; infill
G1 X91.170 Y106.012 E0.00628 ; infill
G1 X91.210 Y105.633 E0.01236 ; infill
G1 X93.525 Y107.947 E0.10601 ; infill
G1 X93.650 Y107.522 E0.01436 ; infill
G1 X91.263 Y105.134 E0.10935 ; infill
G1 X91.316 Y104.636 E0.01622 ; infill
G1 X93.776 Y107.097 E0.11269 ; infill
G1 X93.902 Y106.671 E0.01436 ; infill
G1 X91.826 Y104.595 E0.09508 ; infill
G1 X92.376 Y104.595 E0.01784 ; infill
G1 X94.027 Y106.246 E0.07560 ; infill
G1 X94.096 Y106.012 E0.00790 ; infill
G1 X94.067 Y105.735 E0.00903 ; infill
G1 X92.927 Y104.595 E0.05219 ; infill
G1 X93.478 Y104.595 E0.01784 ; infill
G1 X94.192 Y105.310 E0.03272 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X93.478 Y104.595 E-0.26659 ; wipe and retract
G1 X92.927 Y104.595 E-0.14536 ; wipe and retract
G1 X94.067 Y105.735 E-0.42527 ; wipe and retract
G1 X94.096 Y106.012 E-0.07356 ; wipe and retract
G1 X94.027 Y106.246 E-0.06436 ; wipe and retract
G1 X92.376 Y104.595 E-0.61602 ; wipe and retract
G1 X91.826 Y104.595 E-0.14536 ; wipe and retract
G1 X93.282 Y106.052 E-0.54348 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X89.812 Y99.317 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X90.412 Y99.916 E0.02732 ; infill
G1 X90.967 Y99.924 E0.01789 ; infill
G1 X89.993 Y98.949 E0.04439 ; infill
G1 X90.009 Y98.417 E0.01715 ; infill
G1 X91.273 Y99.682 E0.05761 ; infill
G1 X91.273 Y99.133 E0.01767 ; infill
G1 X90.024 Y97.885 E0.05686 ; infill
G1 X90.038 Y97.420 E0.01501 ; infill
G1 X90.058 Y97.371 E0.00170 ; infill
G1 X91.272 Y98.585 E0.05532 ; infill
G1 X91.271 Y98.036 E0.01767 ; infill
G1 X90.213 Y96.978 E0.04822 ; infill
G1 X90.368 Y96.585 E0.01360 ; infill
G1 X91.271 Y97.488 E0.04113 ; infill
G1 X91.270 Y97.437 E0.00163 ; infill
G1 X90.989 Y96.658 E0.02669 ; infill
G1 X90.523 Y96.192 E0.02123 ; infill
G1 X90.678 Y95.799 E0.01360 ; infill
G1 X90.961 Y96.082 E0.01290 ; infill
G1 X90.726 Y94.373 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X90.778 Y93.706 E0.00539 ; infill
G1 X90.764 Y93.419 E0.00232 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X90.778 Y93.706 E-0.07583 ; wipe and retract
G1 X90.726 Y94.373 E-0.17639 ; wipe and retract
G1 E-2.14779 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X93.074 Y93.700 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X93.477 Y93.700 E0.00191 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X93.074 Y93.700 E-0.10656 ; wipe and retract
G1 E-2.29344 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X95.716 Y93.483 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X96.516 Y94.283 E0.04152 ; infill
G1 X96.864 Y94.283 E0.01277 ; infill
G1 X96.898 Y94.040 E0.00900 ; infill
G1 X95.959 Y93.101 E0.04872 ; infill
G1 X95.978 Y92.826 E0.01011 ; infill
G1 X96.308 Y92.826 E0.01211 ; infill
G1 X97.141 Y93.659 E0.04324 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X96.308 Y92.826 E-0.31086 ; wipe and retract
G1 X95.978 Y92.826 E-0.08704 ; wipe and retract
G1 X95.959 Y93.101 E-0.07271 ; wipe and retract
G1 X96.898 Y94.040 E-0.35029 ; wipe and retract
G1 X96.864 Y94.283 E-0.06469 ; wipe and retract
G1 X96.516 Y94.283 E-0.09184 ; wipe and retract
G1 X95.716 Y93.483 E-0.29853 ; wipe and retract
G1 E-1.12404 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X99.541 Y93.540 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X105.443 Y93.551 E0.03125 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X99.541 Y93.540 E-1.55753 ; wipe and retract
G1 E-0.84247 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X105.424 Y88.311 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X99.325 Y88.311 E0.03233 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X105.424 Y88.311 E-1.60942 ; wipe and retract
G1 E-0.79058 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X96.456 Y87.678 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X96.456 Y87.824 E0.00117 ; infill
G1 X96.455 Y87.969 E0.00173 ; infill
G1 X96.455 Y88.115 E0.00229 ; infill
G1 X96.455 Y88.629 E0.00870 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X96.455 Y88.115 E-0.13567 ; wipe and retract
G1 E-2.26433 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X94.111 Y88.311 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X93.885 Y88.311 E0.00107 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X94.111 Y88.311 E-0.05943 ; wipe and retract
G1 E-2.34057 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X91.547 Y88.514 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X90.831 Y87.798 E0.03299 ; infill
G1 X90.315 Y87.790 E0.01682 ; infill
G1 X90.315 Y87.835 E0.00149 ; infill
G1 X91.333 Y88.854 E0.04694 ; infill
G1 X91.283 Y89.358 E0.01650 ; infill
G1 X90.296 Y88.371 E0.04548 ; infill
G1 X90.260 Y88.889 E0.01691 ; infill
G1 X91.265 Y89.894 E0.04632 ; infill
G1 X91.264 Y89.962 E0.00223 ; infill
G1 X90.994 Y90.177 E0.01126 ; infill
G1 X90.041 Y89.224 E0.04391 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X90.994 Y90.177 E-0.35562 ; wipe and retract
G1 X91.264 Y89.962 E-0.09118 ; wipe and retract
G1 X91.265 Y89.894 E-0.01803 ; wipe and retract
G1 X90.260 Y88.889 E-0.37514 ; wipe and retract
G1 X90.296 Y88.371 E-0.13693 ; wipe and retract
G1 X91.283 Y89.358 E-0.36831 ; wipe and retract
G1 X91.333 Y88.854 E-0.13362 ; wipe and retract
G1 X90.315 Y87.835 E-0.38016 ; wipe and retract
G1 X90.315 Y87.790 E-0.01205 ; wipe and retract
G1 X90.831 Y87.798 E-0.13625 ; wipe and retract
G1 X91.547 Y88.514 E-0.26719 ; wipe and retract
G1 E-0.12553 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X93.646 Y81.761 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X93.606 Y81.887 E0.00057 ; infill
G1 X93.471 Y82.568 F10800.000 ; move to first infill point
G1 F1800.000
G1 X93.460 Y82.699 E0.00057 ; infill
G1 X93.468 Y83.004 F10800.000 ; move to first infill point
G1 F1800.000
G1 X93.487 Y83.196 E0.00089 ; infill
G1 X93.539 Y83.497 F10800.000 ; move to first infill point
G1 F1800.000
G1 X93.576 Y83.624 E0.00057 ; infill
G1 X93.842 Y84.265 F10800.000 ; move to first infill point
G1 F1800.000
G1 X93.905 Y84.380 E0.00057 ; infill
G1 X94.081 Y84.629 F10800.000 ; move to first infill point
G1 F1800.000
G1 X94.204 Y84.778 E0.00089 ; infill
G1 X94.414 Y85.000 F10800.000 ; move to first infill point
G1 F1800.000
G1 X94.515 Y85.084 E0.00057 ; infill
G1 X95.091 Y85.469 F10800.000 ; move to first infill point
G1 F1800.000
G1 X95.209 Y85.531 E0.00057 ; infill
G1 X95.492 Y85.639 F10800.000 ; move to first infill point
G1 F1800.000
G1 X95.686 Y85.698 E0.00094 ; infill
G1 X95.963 Y85.762 F10800.000 ; move to first infill point
G1 F1800.000
G1 X96.454 Y85.834 E0.00356 ; infill
G1 X96.900 Y85.772 E0.00323 ; infill
G1 X97.699 Y85.530 F10800.000 ; move to first infill point
G1 F1800.000
G1 X97.817 Y85.468 E0.00057 ; infill
G1 X98.392 Y85.083 F10800.000 ; move to first infill point
G1 F1800.000
G1 X98.494 Y84.998 E0.00057 ; infill
G1 X98.704 Y84.777 F10800.000 ; move to first infill point
G1 F1800.000
G1 X98.827 Y84.627 E0.00090 ; infill
G1 X99.003 Y84.378 F10800.000 ; move to first infill point
G1 F1800.000
G1 X99.066 Y84.263 E0.00056 ; infill
G1 X99.331 Y83.621 F10800.000 ; move to first infill point
G1 F1800.000
G1 X99.368 Y83.495 E0.00057 ; infill
G1 X99.420 Y83.194 F10800.000 ; move to first infill point
G1 F1800.000
G1 X99.437 Y83.013 E0.00084 ; infill
G1 X99.446 Y82.695 F10800.000 ; move to first infill point
G1 F1800.000
G1 X99.435 Y82.565 E0.00057 ; infill
G1 X99.299 Y81.885 F10800.000 ; move to first infill point
G1 F1800.000
G1 X99.260 Y81.759 E0.00057 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X99.299 Y81.885 E-0.03493 ; wipe and retract
G1 E-2.36507 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X107.777 Y73.620 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X104.846 Y70.689 E0.13017 ; infill
G1 X104.460 Y70.529 E0.01310 ; infill
G1 X104.055 Y70.432 E0.01309 ; infill
G1 X107.721 Y74.098 E0.16278 ; infill
G1 X107.804 Y74.444 E0.01118 ; infill
G1 X107.827 Y74.738 E0.00926 ; infill
G1 X106.629 Y73.540 E0.05318 ; infill
G1 X106.803 Y73.959 E0.01422 ; infill
G1 X106.894 Y74.339 E0.01227 ; infill
G1 X107.868 Y75.313 E0.04324 ; infill
G1 X107.868 Y75.847 E0.01677 ; infill
G1 X106.981 Y74.961 E0.03935 ; infill
G1 X107.007 Y75.521 E0.01760 ; infill
G1 X107.868 Y76.381 E0.03820 ; infill
G1 X107.868 Y76.915 E0.01677 ; infill
G1 X107.007 Y76.055 E0.03820 ; infill
G1 X107.007 Y76.589 E0.01677 ; infill
G1 X107.868 Y77.449 E0.03820 ; infill
G1 X107.868 Y77.983 E0.01677 ; infill
G1 X107.007 Y77.123 E0.03820 ; infill
G1 X107.007 Y77.656 E0.01677 ; infill
G1 X107.868 Y78.517 E0.03820 ; infill
G1 X107.868 Y79.051 E0.01677 ; infill
G1 X107.007 Y78.190 E0.03820 ; infill
G1 X107.007 Y78.724 E0.01677 ; infill
G1 X107.868 Y79.585 E0.03820 ; infill
G1 X107.868 Y80.119 E0.01677 ; infill
G1 X107.007 Y79.258 E0.03820 ; infill
G1 X107.007 Y79.792 E0.01677 ; infill
G1 X107.868 Y80.653 E0.03820 ; infill
G1 X107.868 Y81.187 E0.01677 ; infill
G1 X107.007 Y80.326 E0.03820 ; infill
G1 X107.007 Y80.860 E0.01677 ; infill
G1 X107.868 Y81.721 E0.03820 ; infill
G1 X107.868 Y82.255 E0.01677 ; infill
G1 X107.007 Y81.394 E0.03820 ; infill
G1 X107.007 Y81.928 E0.01677 ; infill
G1 X107.868 Y82.789 E0.03820 ; infill
G1 X107.868 Y83.323 E0.01677 ; infill
G1 X107.007 Y82.462 E0.03820 ; infill
G1 X107.007 Y82.996 E0.01677 ; infill
G1 X107.868 Y83.857 E0.03820 ; infill
G1 X107.868 Y84.391 E0.01677 ; infill
G1 X107.007 Y83.530 E0.03820 ; infill
G1 X107.007 Y84.064 E0.01677 ; infill
G1 X107.868 Y84.925 E0.03820 ; infill
G1 X107.868 Y85.459 E0.01677 ; infill
G1 X107.007 Y84.598 E0.03820 ; infill
G1 X107.007 Y85.132 E0.01677 ; infill
G1 X107.868 Y85.993 E0.03820 ; infill
G1 X107.868 Y86.527 E0.01677 ; infill
G1 X107.007 Y85.666 E0.03820 ; infill
G1 X107.007 Y86.200 E0.01677 ; infill
G1 X107.868 Y87.061 E0.03820 ; infill
G1 X107.868 Y87.595 E0.01677 ; infill
G1 X107.007 Y86.734 E0.03820 ; infill
G1 X107.007 Y87.268 E0.01677 ; infill
G1 X107.868 Y88.129 E0.03820 ; infill
G1 X107.868 Y88.663 E0.01677 ; infill
G1 X107.007 Y87.802 E0.03820 ; infill
G1 X107.007 Y88.336 E0.01677 ; infill
G1 X107.868 Y89.197 E0.03820 ; infill
G1 X107.868 Y89.731 E0.01677 ; infill
G1 X107.007 Y88.870 E0.03820 ; infill
G1 X107.007 Y89.404 E0.01677 ; infill
G1 X107.868 Y90.265 E0.03820 ; infill
G1 X107.868 Y90.799 E0.01677 ; infill
G1 X107.007 Y89.938 E0.03820 ; infill
G1 X107.007 Y90.472 E0.01677 ; infill
G1 X107.868 Y91.333 E0.03820 ; infill
G1 X107.868 Y91.867 E0.01677 ; infill
G1 X107.007 Y91.006 E0.03820 ; infill
G1 X107.007 Y91.540 E0.01677 ; infill
G1 X107.868 Y92.401 E0.03820 ; infill
G1 X107.868 Y92.935 E0.01677 ; infill
G1 X107.007 Y92.074 E0.03820 ; infill
G1 X107.007 Y92.608 E0.01677 ; infill
G1 X107.868 Y93.469 E0.03820 ; infill
G1 X107.868 Y94.003 E0.01677 ; infill
G1 X107.007 Y93.142 E0.03820 ; infill
G1 X107.007 Y93.676 E0.01677 ; infill
G1 X107.868 Y94.537 E0.03820 ; infill
G1 X107.868 Y95.071 E0.01677 ; infill
G1 X107.007 Y94.210 E0.03820 ; infill
G1 X107.007 Y94.744 E0.01677 ; infill
G1 X107.868 Y95.605 E0.03820 ; infill
G1 X107.868 Y96.139 E0.01677 ; infill
G1 X107.007 Y95.278 E0.03820 ; infill
G1 X107.007 Y95.812 E0.01677 ; infill
G1 X107.868 Y96.673 E0.03820 ; infill
G1 X107.868 Y97.207 E0.01677 ; infill
G1 X107.007 Y96.346 E0.03820 ; infill
G1 X107.007 Y96.880 E0.01677 ; infill
G1 X107.868 Y97.741 E0.03820 ; infill
G1 X107.868 Y98.275 E0.01677 ; infill
G1 X107.007 Y97.414 E0.03820 ; infill
G1 X107.007 Y97.948 E0.01677 ; infill
G1 X107.868 Y98.809 E0.03820 ; infill
G1 X107.868 Y99.343 E0.01677 ; infill
G1 X107.007 Y98.482 E0.03820 ; infill
G1 X107.007 Y99.016 E0.01677 ; infill
G1 X107.868 Y99.877 E0.03820 ; infill
G1 X107.868 Y100.411 E0.01677 ; infill
G1 X107.007 Y99.550 E0.03820 ; infill
G1 X107.007 Y100.084 E0.01677 ; infill
G1 X107.868 Y100.945 E0.03820 ; infill
G1 X107.868 Y101.479 E0.01677 ; infill
G1 X107.007 Y100.618 E0.03820 ; infill
G1 X107.007 Y101.152 E0.01677 ; infill
G1 X107.868 Y102.013 E0.03820 ; infill
G1 X107.868 Y102.547 E0.01677 ; infill
G1 X107.007 Y101.686 E0.03820 ; infill
G1 X107.007 Y102.220 E0.01677 ; infill
G1 X107.868 Y103.081 E0.03820 ; infill
G1 X107.868 Y103.615 E0.01677 ; infill
G1 X107.007 Y102.754 E0.03820 ; infill
G1 X107.007 Y103.288 E0.01677 ; infill
G1 X107.868 Y104.149 E0.03821 ; infill
G1 X107.868 Y104.683 E0.01677 ; infill
G1 X107.007 Y103.822 E0.03821 ; infill
G1 X107.007 Y104.356 E0.01677 ; infill
G1 X107.868 Y105.217 E0.03821 ; infill
G1 X107.868 Y105.751 E0.01677 ; infill
G1 X107.007 Y104.890 E0.03821 ; infill
G1 X107.007 Y105.424 E0.01677 ; infill
G1 X107.868 Y106.285 E0.03821 ; infill
G1 X107.868 Y106.819 E0.01677 ; infill
G1 X107.007 Y105.958 E0.03821 ; infill
G1 X107.007 Y106.492 E0.01677 ; infill
G1 X107.868 Y107.353 E0.03821 ; infill
G1 X107.868 Y107.887 E0.01677 ; infill
G1 X107.007 Y107.026 E0.03821 ; infill
G1 X107.007 Y107.560 E0.01677 ; infill
G1 X107.868 Y108.421 E0.03821 ; infill
G1 X107.868 Y108.955 E0.01677 ; infill
G1 X107.007 Y108.094 E0.03821 ; infill
G1 X107.007 Y108.628 E0.01677 ; infill
G1 X107.868 Y109.489 E0.03821 ; infill
G1 X107.868 Y110.023 E0.01677 ; infill
G1 X107.007 Y109.162 E0.03821 ; infill
G1 X107.007 Y109.696 E0.01677 ; infill
G1 X107.868 Y110.557 E0.03821 ; infill
G1 X107.868 Y111.091 E0.01677 ; infill
G1 X107.007 Y110.230 E0.03821 ; infill
G1 X107.007 Y110.764 E0.01677 ; infill
G1 X107.868 Y111.624 E0.03821 ; infill
G1 X107.868 Y112.158 E0.01677 ; infill
G1 X107.007 Y111.298 E0.03822 ; infill
G1 X106.990 Y111.815 E0.01624 ; infill
G1 X107.868 Y112.692 E0.03897 ; infill
G1 X107.868 Y113.226 E0.01677 ; infill
G1 X106.972 Y112.331 E0.03975 ; infill
G1 X106.919 Y112.812 E0.01518 ; infill
G1 X107.868 Y113.760 E0.04212 ; infill
G1 X107.868 Y114.294 E0.01677 ; infill
G1 X106.876 Y113.303 E0.04405 ; infill
G1 X106.941 Y113.902 E0.01894 ; infill
G1 X107.868 Y114.828 E0.04113 ; infill
G1 X107.868 Y115.362 E0.01677 ; infill
G1 X106.989 Y114.483 E0.03903 ; infill
G1 X107.002 Y115.031 E0.01720 ; infill
G1 X107.868 Y115.896 E0.03842 ; infill
G1 X107.868 Y116.430 E0.01677 ; infill
G1 X107.003 Y115.566 E0.03840 ; infill
G1 X107.003 Y116.100 E0.01678 ; infill
G1 X107.868 Y116.964 E0.03839 ; infill
G1 X107.868 Y117.498 E0.01677 ; infill
G1 X107.004 Y116.634 E0.03837 ; infill
G1 X107.004 Y117.169 E0.01678 ; infill
G1 X107.868 Y118.032 E0.03835 ; infill
G1 X107.868 Y118.566 E0.01677 ; infill
G1 X107.004 Y117.703 E0.03833 ; infill
G1 X107.005 Y118.238 E0.01678 ; infill
G1 X107.868 Y119.100 E0.03831 ; infill
G1 X107.868 Y119.634 E0.01677 ; infill
G1 X107.005 Y118.772 E0.03829 ; infill
G1 X107.006 Y119.306 E0.01678 ; infill
G1 X107.868 Y120.168 E0.03827 ; infill
G1 X107.868 Y120.702 E0.01677 ; infill
G1 X107.006 Y119.841 E0.03825 ; infill
G1 X107.007 Y120.375 E0.01678 ; infill
G1 X107.868 Y121.236 E0.03824 ; infill
G1 X107.868 Y121.770 E0.01677 ; infill
G1 X107.007 Y120.910 E0.03822 ; infill
G1 X107.007 Y121.444 E0.01678 ; infill
G1 X107.868 Y122.304 E0.03820 ; infill
G1 X107.868 Y122.838 E0.01677 ; infill
G1 X107.008 Y121.979 E0.03818 ; infill
G1 X107.007 Y122.512 E0.01675 ; infill
G1 X107.868 Y123.372 E0.03820 ; infill
G1 X107.868 Y123.906 E0.01677 ; infill
G1 X107.007 Y123.046 E0.03820 ; infill
G1 X107.007 Y123.580 E0.01677 ; infill
G1 X107.868 Y124.440 E0.03820 ; infill
G1 X107.868 Y124.974 E0.01677 ; infill
G1 X107.007 Y124.114 E0.03820 ; infill
G1 X107.007 Y124.648 E0.01677 ; infill
G1 X107.868 Y125.508 E0.03820 ; infill
G1 X107.868 Y126.042 E0.01677 ; infill
G1 X107.007 Y125.182 E0.03820 ; infill
G1 X107.007 Y125.716 E0.01677 ; infill
G1 X107.868 Y126.576 E0.03820 ; infill
G1 X107.868 Y127.110 E0.01677 ; infill
G1 X107.007 Y126.250 E0.03820 ; infill
G1 X107.007 Y126.784 E0.01677 ; infill
G1 X107.868 Y127.644 E0.03820 ; infill
G1 X107.868 Y128.178 E0.01677 ; infill
G1 X107.007 Y127.318 E0.03820 ; infill
G1 X107.007 Y127.852 E0.01677 ; infill
G1 X107.868 Y128.712 E0.03820 ; infill
G1 X107.868 Y129.246 E0.01677 ; infill
G1 X107.007 Y128.386 E0.03820 ; infill
G1 X107.007 Y128.920 E0.01677 ; infill
G1 X107.868 Y129.780 E0.03820 ; infill
G1 X107.868 Y130.314 E0.01677 ; infill
G1 X107.007 Y129.454 E0.03820 ; infill
G1 X107.007 Y129.988 E0.01677 ; infill
G1 X107.868 Y130.848 E0.03820 ; infill
G1 X107.868 Y131.382 E0.01677 ; infill
G1 X107.007 Y130.522 E0.03820 ; infill
G1 X107.007 Y131.056 E0.01677 ; infill
G1 X107.868 Y131.916 E0.03820 ; infill
G1 X107.868 Y132.450 E0.01677 ; infill
G1 X107.007 Y131.590 E0.03820 ; infill
G1 X107.007 Y132.124 E0.01677 ; infill
G1 X107.868 Y132.984 E0.03820 ; infill
G1 X107.868 Y133.518 E0.01677 ; infill
G1 X107.007 Y132.658 E0.03820 ; infill
G1 X107.007 Y133.192 E0.01677 ; infill
G1 X107.868 Y134.052 E0.03820 ; infill
G1 X107.868 Y134.586 E0.01677 ; infill
G1 X107.007 Y133.726 E0.03820 ; infill
G1 X107.007 Y134.260 E0.01677 ; infill
G1 X107.840 Y135.093 E0.03698 ; infill
G1 X107.804 Y135.556 E0.01459 ; infill
G1 X107.797 Y135.584 E0.00089 ; infill
G1 X107.001 Y134.788 E0.03534 ; infill
G1 X106.962 Y135.283 E0.01559 ; infill
G1 X107.694 Y136.014 E0.03248 ; infill
G1 X107.623 Y136.308 E0.00948 ; infill
G1 X107.573 Y136.428 E0.00409 ; infill
G1 X106.877 Y135.732 E0.03093 ; infill
G1 X106.803 Y136.041 E0.01000 ; infill
G1 X106.759 Y136.147 E0.00360 ; infill
G1 X107.417 Y136.806 E0.02924 ; infill
G1 X107.327 Y137.022 E0.00735 ; infill
G1 X107.241 Y137.163 E0.00520 ; infill
G1 X106.602 Y136.525 E0.02836 ; infill
G1 X106.558 Y136.630 E0.00359 ; infill
G1 X106.412 Y136.869 E0.00879 ; infill
G1 X107.038 Y137.494 E0.02778 ; infill
G1 X106.923 Y137.681 E0.00688 ; infill
G1 X106.816 Y137.807 E0.00518 ; infill
G1 X106.206 Y137.197 E0.02709 ; infill
G1 X105.960 Y137.485 E0.01189 ; infill
G1 X106.570 Y138.095 E0.02709 ; infill
G1 X106.421 Y138.269 E0.00720 ; infill
G1 X106.308 Y138.366 E0.00470 ; infill
G1 X105.697 Y137.756 E0.02709 ; infill
G1 X105.409 Y138.002 E0.01189 ; infill
G1 X106.020 Y138.612 E0.02709 ; infill
G1 X105.833 Y138.771 E0.00769 ; infill
G1 X105.716 Y138.843 E0.00431 ; infill
G1 X105.091 Y138.217 E0.02778 ; infill
G1 X104.756 Y138.417 E0.01223 ; infill
G1 X105.385 Y139.046 E0.02792 ; infill
G1 X105.174 Y139.175 E0.00777 ; infill
G1 X105.037 Y139.232 E0.00465 ; infill
G1 X104.379 Y138.573 E0.02924 ; infill
G1 X104.193 Y138.650 E0.00631 ; infill
G1 X103.974 Y138.703 E0.00707 ; infill
G1 X104.660 Y139.388 E0.03043 ; infill
G1 X104.460 Y139.471 E0.00679 ; infill
G1 X104.257 Y139.520 E0.00655 ; infill
G1 X103.539 Y138.802 E0.03187 ; infill
G1 X103.044 Y138.841 E0.01559 ; infill
G1 X103.827 Y139.623 E0.03473 ; infill
G1 X103.708 Y139.651 E0.00382 ; infill
G1 X103.349 Y139.680 E0.01131 ; infill
G1 X102.525 Y138.855 E0.03661 ; infill
G1 X101.991 Y138.855 E0.01677 ; infill
G1 X102.851 Y139.715 E0.03820 ; infill
G1 X102.317 Y139.715 E0.01677 ; infill
G1 X101.457 Y138.855 E0.03820 ; infill
G1 X100.923 Y138.855 E0.01677 ; infill
G1 X101.783 Y139.715 E0.03820 ; infill
G1 X101.249 Y139.715 E0.01677 ; infill
G1 X100.389 Y138.855 E0.03820 ; infill
G1 X99.855 Y138.855 E0.01677 ; infill
G1 X100.715 Y139.715 E0.03820 ; infill
G1 X100.181 Y139.715 E0.01677 ; infill
G1 X99.321 Y138.855 E0.03820 ; infill
G1 X98.787 Y138.855 E0.01677 ; infill
G1 X99.647 Y139.715 E0.03820 ; infill
G1 X99.113 Y139.715 E0.01677 ; infill
G1 X98.253 Y138.855 E0.03820 ; infill
G1 X97.719 Y138.855 E0.01677 ; infill
G1 X98.579 Y139.715 E0.03820 ; infill
G1 X98.045 Y139.715 E0.01677 ; infill
G1 X97.185 Y138.855 E0.03820 ; infill
G1 X96.651 Y138.855 E0.01677 ; infill
G1 X97.511 Y139.715 E0.03820 ; infill
G1 X96.977 Y139.715 E0.01677 ; infill
G1 X96.117 Y138.855 E0.03820 ; infill
G1 X95.583 Y138.855 E0.01677 ; infill
G1 X96.443 Y139.715 E0.03820 ; infill
G1 X95.909 Y139.715 E0.01677 ; infill
G1 X95.049 Y138.855 E0.03820 ; infill
G1 X94.515 Y138.855 E0.01677 ; infill
G1 X95.375 Y139.715 E0.03820 ; infill
G1 X94.841 Y139.715 E0.01677 ; infill
G1 X93.981 Y138.855 E0.03820 ; infill
G1 X93.447 Y138.855 E0.01677 ; infill
G1 X94.307 Y139.715 E0.03820 ; infill
G1 X93.773 Y139.715 E0.01677 ; infill
G1 X92.913 Y138.855 E0.03820 ; infill
G1 X92.379 Y138.855 E0.01677 ; infill
G1 X93.239 Y139.715 E0.03820 ; infill
G1 X92.705 Y139.715 E0.01677 ; infill
G1 X91.845 Y138.855 E0.03820 ; infill
G1 X91.311 Y138.855 E0.01677 ; infill
G1 X92.171 Y139.715 E0.03820 ; infill
G1 X91.637 Y139.715 E0.01677 ; infill
G1 X90.777 Y138.855 E0.03820 ; infill
G1 X90.243 Y138.855 E0.01677 ; infill
G1 X91.103 Y139.715 E0.03820 ; infill
G1 X90.569 Y139.715 E0.01677 ; infill
G1 X89.709 Y138.855 E0.03820 ; infill
G1 X89.175 Y138.855 E0.01677 ; infill
G1 X90.035 Y139.715 E0.03820 ; infill
G1 X89.501 Y139.715 E0.01677 ; infill
G1 X88.641 Y138.855 E0.03820 ; infill
G1 X88.107 Y138.855 E0.01677 ; infill
G1 X88.967 Y139.715 E0.03820 ; infill
G1 X88.433 Y139.715 E0.01677 ; infill
G1 X87.573 Y138.855 E0.03820 ; infill
G1 X87.039 Y138.855 E0.01677 ; infill
G1 X87.899 Y139.715 E0.03820 ; infill
G1 X87.365 Y139.715 E0.01677 ; infill
G1 X86.505 Y138.855 E0.03820 ; infill
G1 X85.971 Y138.855 E0.01677 ; infill
G1 X86.831 Y139.715 E0.03820 ; infill
G1 X86.297 Y139.715 E0.01677 ; infill
G1 X85.437 Y138.855 E0.03820 ; infill
G1 X84.903 Y138.855 E0.01677 ; infill
G1 X85.763 Y139.715 E0.03820 ; infill
G1 X85.229 Y139.715 E0.01677 ; infill
G1 X84.369 Y138.855 E0.03820 ; infill
G1 X83.835 Y138.855 E0.01677 ; infill
G1 X84.695 Y139.715 E0.03820 ; infill
G1 X84.161 Y139.715 E0.01677 ; infill
G1 X83.301 Y138.855 E0.03820 ; infill
G1 X82.767 Y138.855 E0.01677 ; infill
G1 X83.627 Y139.715 E0.03820 ; infill
G1 X83.093 Y139.715 E0.01677 ; infill
G1 X82.233 Y138.855 E0.03820 ; infill
G1 X81.699 Y138.855 E0.01677 ; infill
G1 X82.559 Y139.715 E0.03820 ; infill
G1 X82.025 Y139.715 E0.01677 ; infill
G1 X81.165 Y138.855 E0.03820 ; infill
G1 X80.631 Y138.855 E0.01677 ; infill
G1 X81.491 Y139.715 E0.03820 ; infill
G1 X80.957 Y139.715 E0.01677 ; infill
G1 X80.097 Y138.855 E0.03820 ; infill
G1 X79.563 Y138.855 E0.01677 ; infill
G1 X80.423 Y139.715 E0.03820 ; infill
G1 X79.889 Y139.715 E0.01677 ; infill
G1 X79.029 Y138.855 E0.03820 ; infill
G1 X78.495 Y138.855 E0.01677 ; infill
G1 X79.355 Y139.715 E0.03820 ; infill
G1 X78.821 Y139.715 E0.01677 ; infill
G1 X77.961 Y138.855 E0.03820 ; infill
G1 X77.427 Y138.855 E0.01677 ; infill
G1 X78.287 Y139.715 E0.03820 ; infill
G1 X77.753 Y139.715 E0.01677 ; infill
G1 X76.893 Y138.855 E0.03820 ; infill
G1 X76.359 Y138.855 E0.01677 ; infill
G1 X77.219 Y139.715 E0.03820 ; infill
G1 X76.685 Y139.715 E0.01677 ; infill
G1 X75.825 Y138.855 E0.03820 ; infill
G1 X75.291 Y138.855 E0.01677 ; infill
G1 X76.151 Y139.715 E0.03820 ; infill
G1 X75.617 Y139.715 E0.01677 ; infill
G1 X74.757 Y138.855 E0.03820 ; infill
G1 X74.223 Y138.855 E0.01677 ; infill
G1 X75.083 Y139.715 E0.03820 ; infill
G1 X74.549 Y139.715 E0.01677 ; infill
G1 X73.689 Y138.855 E0.03820 ; infill
G1 X73.155 Y138.855 E0.01677 ; infill
G1 X74.015 Y139.715 E0.03820 ; infill
G1 X73.481 Y139.715 E0.01677 ; infill
G1 X72.621 Y138.855 E0.03820 ; infill
G1 X72.087 Y138.855 E0.01677 ; infill
G1 X72.947 Y139.715 E0.03820 ; infill
G1 X72.413 Y139.715 E0.01677 ; infill
G1 X71.553 Y138.855 E0.03820 ; infill
G1 X71.019 Y138.855 E0.01677 ; infill
G1 X71.879 Y139.715 E0.03820 ; infill
G1 X71.345 Y139.715 E0.01677 ; infill
G1 X70.485 Y138.855 E0.03820 ; infill
G1 X69.951 Y138.855 E0.01677 ; infill
G1 X70.811 Y139.715 E0.03820 ; infill
G1 X70.277 Y139.715 E0.01677 ; infill
G1 X69.417 Y138.855 E0.03820 ; infill
G1 X68.883 Y138.855 E0.01677 ; infill
G1 X69.743 Y139.715 E0.03820 ; infill
G1 X69.209 Y139.715 E0.01677 ; infill
G1 X68.349 Y138.855 E0.03820 ; infill
G1 X67.815 Y138.855 E0.01677 ; infill
G1 X68.675 Y139.715 E0.03820 ; infill
G1 X68.141 Y139.715 E0.01677 ; infill
G1 X67.281 Y138.855 E0.03820 ; infill
G1 X66.747 Y138.855 E0.01677 ; infill
G1 X67.607 Y139.715 E0.03820 ; infill
G1 X67.073 Y139.715 E0.01677 ; infill
G1 X66.213 Y138.855 E0.03820 ; infill
G1 X65.679 Y138.855 E0.01677 ; infill
G1 X66.539 Y139.715 E0.03820 ; infill
G1 X66.005 Y139.715 E0.01677 ; infill
G1 X65.145 Y138.855 E0.03820 ; infill
G1 X64.611 Y138.855 E0.01677 ; infill
G1 X65.471 Y139.715 E0.03820 ; infill
G1 X64.937 Y139.715 E0.01677 ; infill
G1 X64.077 Y138.855 E0.03820 ; infill
G1 X63.543 Y138.855 E0.01677 ; infill
G1 X64.403 Y139.715 E0.03820 ; infill
G1 X63.869 Y139.715 E0.01677 ; infill
G1 X63.009 Y138.855 E0.03820 ; infill
G1 X62.475 Y138.855 E0.01677 ; infill
G1 X63.335 Y139.715 E0.03820 ; infill
G1 X62.801 Y139.715 E0.01677 ; infill
G1 X61.941 Y138.855 E0.03820 ; infill
G1 X61.407 Y138.855 E0.01677 ; infill
G1 X62.267 Y139.715 E0.03820 ; infill
G1 X61.733 Y139.715 E0.01677 ; infill
G1 X60.873 Y138.855 E0.03820 ; infill
G1 X60.339 Y138.855 E0.01677 ; infill
G1 X61.199 Y139.715 E0.03820 ; infill
G1 X60.665 Y139.715 E0.01677 ; infill
G1 X59.805 Y138.855 E0.03820 ; infill
G1 X59.271 Y138.855 E0.01677 ; infill
G1 X60.131 Y139.715 E0.03820 ; infill
G1 X59.597 Y139.715 E0.01677 ; infill
G1 X58.737 Y138.855 E0.03820 ; infill
G1 X58.203 Y138.855 E0.01677 ; infill
G1 X59.063 Y139.715 E0.03820 ; infill
G1 X58.529 Y139.715 E0.01677 ; infill
G1 X57.669 Y138.855 E0.03820 ; infill
G1 X57.135 Y138.855 E0.01677 ; infill
G1 X57.995 Y139.715 E0.03820 ; infill
G1 X57.461 Y139.715 E0.01677 ; infill
G1 X56.601 Y138.855 E0.03820 ; infill
G1 X56.067 Y138.855 E0.01677 ; infill
G1 X56.927 Y139.715 E0.03820 ; infill
G1 X56.393 Y139.715 E0.01677 ; infill
G1 X55.533 Y138.855 E0.03820 ; infill
G1 X54.999 Y138.855 E0.01677 ; infill
G1 X55.859 Y139.715 E0.03820 ; infill
G1 X55.325 Y139.715 E0.01677 ; infill
G1 X54.465 Y138.855 E0.03820 ; infill
G1 X53.931 Y138.855 E0.01677 ; infill
G1 X54.791 Y139.715 E0.03820 ; infill
G1 X54.257 Y139.715 E0.01677 ; infill
G1 X53.397 Y138.855 E0.03820 ; infill
G1 X52.863 Y138.855 E0.01677 ; infill
G1 X53.723 Y139.715 E0.03820 ; infill
G1 X53.189 Y139.715 E0.01677 ; infill
G1 X52.329 Y138.855 E0.03820 ; infill
G1 X51.795 Y138.855 E0.01677 ; infill
G1 X52.655 Y139.715 E0.03820 ; infill
G1 X52.121 Y139.715 E0.01677 ; infill
G1 X51.261 Y138.855 E0.03820 ; infill
G1 X50.727 Y138.855 E0.01677 ; infill
G1 X51.587 Y139.715 E0.03820 ; infill
G1 X51.053 Y139.715 E0.01677 ; infill
G1 X50.193 Y138.855 E0.03820 ; infill
G1 X49.659 Y138.855 E0.01677 ; infill
G1 X50.519 Y139.715 E0.03820 ; infill
G1 X49.985 Y139.715 E0.01677 ; infill
G1 X49.125 Y138.855 E0.03820 ; infill
G1 X48.591 Y138.855 E0.01677 ; infill
G1 X49.451 Y139.715 E0.03820 ; infill
G1 X48.917 Y139.715 E0.01677 ; infill
G1 X48.057 Y138.855 E0.03820 ; infill
G1 X47.523 Y138.855 E0.01677 ; infill
G1 X48.383 Y139.715 E0.03820 ; infill
G1 X47.849 Y139.715 E0.01677 ; infill
G1 X46.989 Y138.855 E0.03820 ; infill
G1 X46.455 Y138.855 E0.01677 ; infill
G1 X47.315 Y139.715 E0.03820 ; infill
G1 X46.781 Y139.715 E0.01677 ; infill
G1 X45.921 Y138.855 E0.03820 ; infill
G1 X45.387 Y138.855 E0.01677 ; infill
G1 X46.247 Y139.715 E0.03820 ; infill
G1 X45.713 Y139.715 E0.01677 ; infill
G1 X44.853 Y138.855 E0.03820 ; infill
G1 X44.319 Y138.855 E0.01677 ; infill
G1 X45.179 Y139.715 E0.03820 ; infill
G1 X44.645 Y139.715 E0.01677 ; infill
G1 X43.785 Y138.855 E0.03820 ; infill
G1 X43.251 Y138.855 E0.01677 ; infill
G1 X44.111 Y139.715 E0.03820 ; infill
G1 X43.577 Y139.715 E0.01677 ; infill
G1 X42.717 Y138.855 E0.03820 ; infill
G1 X42.183 Y138.855 E0.01677 ; infill
G1 X43.043 Y139.715 E0.03820 ; infill
G1 X42.509 Y139.715 E0.01677 ; infill
G1 X41.649 Y138.855 E0.03820 ; infill
G1 X41.115 Y138.855 E0.01677 ; infill
G1 X41.975 Y139.715 E0.03820 ; infill
G1 X41.441 Y139.715 E0.01677 ; infill
G1 X40.581 Y138.855 E0.03820 ; infill
G1 X40.047 Y138.855 E0.01677 ; infill
G1 X40.907 Y139.715 E0.03820 ; infill
G1 X40.373 Y139.715 E0.01677 ; infill
G1 X39.513 Y138.855 E0.03820 ; infill
G1 X38.979 Y138.855 E0.01677 ; infill
G1 X39.839 Y139.715 E0.03820 ; infill
G1 X39.305 Y139.715 E0.01677 ; infill
G1 X38.419 Y138.829 E0.03935 ; infill
G1 X38.038 Y138.799 E0.01202 ; infill
G1 X37.797 Y138.742 E0.00775 ; infill
G1 X38.771 Y139.715 E0.04324 ; infill
G1 X38.715 Y139.715 E0.00176 ; infill
G1 X38.197 Y139.675 E0.01634 ; infill
G1 X36.999 Y138.477 E0.05318 ; infill
G1 X36.828 Y138.406 E0.00579 ; infill
G1 X36.285 Y138.073 E0.02002 ; infill
G1 X35.800 Y137.659 E0.02002 ; infill
G1 X35.386 Y137.174 E0.02002 ; infill
G1 X35.052 Y136.630 E0.02002 ; infill
G1 X34.982 Y136.460 E0.00579 ; infill
G1 X33.784 Y135.262 E0.05318 ; infill
G1 X33.743 Y134.743 E0.01634 ; infill
G1 X33.743 Y134.687 E0.00176 ; infill
G1 X34.717 Y135.661 E0.04324 ; infill
G1 X34.660 Y135.421 E0.00776 ; infill
G1 X34.630 Y135.040 E0.01201 ; infill
G1 X33.743 Y134.153 E0.03935 ; infill
G1 X33.743 Y133.619 E0.01677 ; infill
G1 X34.604 Y134.480 E0.03820 ; infill
G1 X34.604 Y133.946 E0.01677 ; infill
G1 X33.743 Y133.085 E0.03820 ; infill
G1 X33.743 Y132.551 E0.01677 ; infill
G1 X34.604 Y133.412 E0.03820 ; infill
G1 X34.604 Y132.878 E0.01677 ; infill
G1 X33.743 Y132.017 E0.03820 ; infill
G1 X33.743 Y131.483 E0.01677 ; infill
G1 X34.604 Y132.344 E0.03820 ; infill
G1 X34.604 Y131.810 E0.01677 ; infill
G1 X33.743 Y130.949 E0.03820 ; infill
G1 X33.743 Y130.415 E0.01677 ; infill
G1 X34.604 Y131.276 E0.03820 ; infill
G1 X34.604 Y130.742 E0.01677 ; infill
G1 X33.743 Y129.881 E0.03820 ; infill
G1 X33.743 Y129.347 E0.01677 ; infill
G1 X34.604 Y130.208 E0.03820 ; infill
G1 X34.604 Y129.674 E0.01677 ; infill
G1 X33.743 Y128.813 E0.03820 ; infill
G1 X33.743 Y128.279 E0.01677 ; infill
G1 X34.604 Y129.140 E0.03820 ; infill
G1 X34.604 Y128.606 E0.01677 ; infill
G1 X33.743 Y127.745 E0.03820 ; infill
G1 X33.743 Y127.211 E0.01677 ; infill
G1 X34.604 Y128.072 E0.03820 ; infill
G1 X34.604 Y127.538 E0.01677 ; infill
G1 X33.743 Y126.677 E0.03820 ; infill
G1 X33.743 Y126.143 E0.01677 ; infill
G1 X34.604 Y127.004 E0.03820 ; infill
G1 X34.604 Y126.470 E0.01677 ; infill
G1 X33.743 Y125.609 E0.03820 ; infill
G1 X33.743 Y125.075 E0.01677 ; infill
G1 X34.604 Y125.936 E0.03820 ; infill
G1 X34.604 Y125.402 E0.01677 ; infill
G1 X33.743 Y124.541 E0.03820 ; infill
G1 X33.743 Y124.007 E0.01677 ; infill
G1 X34.604 Y124.868 E0.03820 ; infill
G1 X34.604 Y124.334 E0.01677 ; infill
G1 X33.743 Y123.473 E0.03820 ; infill
G1 X33.743 Y122.939 E0.01677 ; infill
G1 X34.604 Y123.800 E0.03820 ; infill
G1 X34.604 Y123.266 E0.01677 ; infill
G1 X33.743 Y122.405 E0.03820 ; infill
G1 X33.743 Y121.871 E0.01677 ; infill
G1 X34.604 Y122.732 E0.03820 ; infill
G1 X34.603 Y122.197 E0.01678 ; infill
G1 X33.743 Y121.337 E0.03817 ; infill
G1 X33.743 Y120.803 E0.01677 ; infill
G1 X34.603 Y121.664 E0.03819 ; infill
G1 X34.604 Y121.130 E0.01675 ; infill
G1 X33.743 Y120.269 E0.03821 ; infill
G1 X33.743 Y119.735 E0.01677 ; infill
G1 X34.604 Y120.596 E0.03823 ; infill
G1 X34.605 Y120.063 E0.01675 ; infill
G1 X33.743 Y119.201 E0.03825 ; infill
G1 X33.743 Y118.667 E0.01677 ; infill
G1 X34.605 Y119.529 E0.03827 ; infill
G1 X34.606 Y118.996 E0.01675 ; infill
G1 X33.743 Y118.133 E0.03828 ; infill
G1 X33.743 Y117.599 E0.01677 ; infill
G1 X34.606 Y118.462 E0.03830 ; infill
G1 X34.606 Y117.929 E0.01675 ; infill
G1 X33.743 Y117.065 E0.03832 ; infill
G1 X33.743 Y116.532 E0.01677 ; infill
G1 X34.607 Y117.395 E0.03834 ; infill
G1 X34.607 Y116.861 E0.01675 ; infill
G1 X33.743 Y115.998 E0.03836 ; infill
G1 X33.743 Y115.464 E0.01677 ; infill
G1 X34.608 Y116.328 E0.03838 ; infill
G1 X34.608 Y115.794 E0.01675 ; infill
G1 X33.743 Y114.930 E0.03840 ; infill
G1 X33.743 Y114.396 E0.01677 ; infill
G1 X34.608 Y115.261 E0.03842 ; infill
G1 X34.609 Y114.727 E0.01675 ; infill
G1 X33.743 Y113.862 E0.03844 ; infill
G1 X33.743 Y113.328 E0.01677 ; infill
G1 X34.637 Y114.221 E0.03967 ; infill
G1 X34.688 Y113.738 E0.01525 ; infill
G1 X33.743 Y112.794 E0.04193 ; infill
G1 X33.743 Y112.260 E0.01677 ; infill
G1 X34.741 Y113.252 E0.04418 ; infill
G1 X34.675 Y112.657 E0.01881 ; infill
G1 X33.743 Y111.726 E0.04136 ; infill
G1 X33.743 Y111.192 E0.01677 ; infill
G1 X34.630 Y112.078 E0.03936 ; infill
G1 X34.612 Y111.526 E0.01735 ; infill
G1 X33.743 Y110.658 E0.03855 ; infill
G1 X33.743 Y110.124 E0.01677 ; infill
G1 X34.604 Y110.984 E0.03821 ; infill
G1 X34.604 Y110.450 E0.01677 ; infill
G1 X33.743 Y109.590 E0.03821 ; infill
G1 X33.743 Y109.056 E0.01677 ; infill
G1 X34.604 Y109.916 E0.03821 ; infill
G1 X34.604 Y109.382 E0.01677 ; infill
G1 X33.743 Y108.522 E0.03821 ; infill
G1 X33.743 Y107.988 E0.01677 ; infill
G1 X34.604 Y108.848 E0.03821 ; infill
G1 X34.604 Y108.314 E0.01677 ; infill
G1 X33.743 Y107.454 E0.03821 ; infill
G1 X33.743 Y106.920 E0.01677 ; infill
G1 X34.604 Y107.780 E0.03821 ; infill
G1 X34.604 Y107.246 E0.01677 ; infill
G1 X33.743 Y106.386 E0.03821 ; infill
G1 X33.743 Y105.852 E0.01677 ; infill
G1 X34.604 Y106.712 E0.03821 ; infill
G1 X34.604 Y106.178 E0.01677 ; infill
G1 X33.743 Y105.318 E0.03821 ; infill
G1 X33.743 Y104.784 E0.01677 ; infill
G1 X34.604 Y105.644 E0.03821 ; infill
G1 X34.604 Y105.110 E0.01677 ; infill
G1 X33.743 Y104.250 E0.03821 ; infill
G1 X33.743 Y103.716 E0.01677 ; infill
G1 X34.604 Y104.576 E0.03821 ; infill
G1 X34.604 Y104.042 E0.01677 ; infill
G1 X33.743 Y103.182 E0.03821 ; infill
G1 X33.743 Y102.648 E0.01677 ; infill
G1 X34.604 Y103.508 E0.03821 ; infill
G1 X34.604 Y102.974 E0.01677 ; infill
G1 X33.743 Y102.114 E0.03821 ; infill
G1 X33.743 Y101.580 E0.01677 ; infill
G1 X34.604 Y102.440 E0.03820 ; infill
G1 X34.604 Y101.906 E0.01677 ; infill
G1 X33.743 Y101.046 E0.03820 ; infill
G1 X33.743 Y100.512 E0.01677 ; infill
G1 X34.604 Y101.372 E0.03820 ; infill
G1 X34.604 Y100.838 E0.01677 ; infill
G1 X33.743 Y99.978 E0.03820 ; infill
G1 X33.743 Y99.444 E0.01677 ; infill
G1 X34.604 Y100.304 E0.03820 ; infill
G1 X34.604 Y99.770 E0.01677 ; infill
G1 X33.743 Y98.910 E0.03820 ; infill
G1 X33.743 Y98.376 E0.01677 ; infill
G1 X34.604 Y99.236 E0.03820 ; infill
G1 X34.604 Y98.702 E0.01677 ; infill
G1 X33.743 Y97.842 E0.03820 ; infill
G1 X33.743 Y97.308 E0.01677 ; infill
G1 X34.604 Y98.168 E0.03820 ; infill
G1 X34.604 Y97.634 E0.01677 ; infill
G1 X33.743 Y96.774 E0.03820 ; infill
G1 X33.743 Y96.240 E0.01677 ; infill
G1 X34.604 Y97.100 E0.03820 ; infill
G1 X34.604 Y96.566 E0.01677 ; infill
G1 X33.743 Y95.706 E0.03820 ; infill
G1 X33.743 Y95.172 E0.01677 ; infill
G1 X34.604 Y96.032 E0.03820 ; infill
G1 X34.604 Y95.498 E0.01677 ; infill
G1 X33.743 Y94.638 E0.03820 ; infill
G1 X33.743 Y94.104 E0.01677 ; infill
G1 X34.604 Y94.964 E0.03820 ; infill
G1 X34.604 Y94.430 E0.01677 ; infill
G1 X33.743 Y93.570 E0.03820 ; infill
G1 X33.743 Y93.036 E0.01677 ; infill
G1 X34.604 Y93.896 E0.03820 ; infill
G1 X34.604 Y93.362 E0.01677 ; infill
G1 X33.743 Y92.502 E0.03820 ; infill
G1 X33.743 Y91.968 E0.01677 ; infill
G1 X34.604 Y92.828 E0.03820 ; infill
G1 X34.604 Y92.294 E0.01677 ; infill
G1 X33.743 Y91.434 E0.03820 ; infill
G1 X33.743 Y90.900 E0.01677 ; infill
G1 X34.604 Y91.760 E0.03820 ; infill
G1 X34.604 Y91.226 E0.01677 ; infill
G1 X33.743 Y90.366 E0.03820 ; infill
G1 X33.743 Y89.832 E0.01677 ; infill
G1 X34.604 Y90.692 E0.03820 ; infill
G1 X34.604 Y90.158 E0.01677 ; infill
G1 X33.743 Y89.298 E0.03820 ; infill
G1 X33.743 Y88.764 E0.01677 ; infill
G1 X34.604 Y89.624 E0.03820 ; infill
G1 X34.604 Y89.090 E0.01677 ; infill
G1 X33.743 Y88.230 E0.03820 ; infill
G1 X33.743 Y87.696 E0.01677 ; infill
G1 X34.604 Y88.556 E0.03820 ; infill
G1 X34.604 Y88.022 E0.01677 ; infill
G1 X33.743 Y87.162 E0.03820 ; infill
G1 X33.743 Y86.628 E0.01677 ; infill
G1 X34.604 Y87.488 E0.03820 ; infill
G1 X34.604 Y86.954 E0.01677 ; infill
G1 X33.743 Y86.094 E0.03820 ; infill
G1 X33.743 Y85.560 E0.01677 ; infill
G1 X34.604 Y86.420 E0.03820 ; infill
G1 X34.604 Y85.886 E0.01677 ; infill
G1 X33.743 Y85.026 E0.03820 ; infill
G1 X33.743 Y84.492 E0.01677 ; infill
G1 X34.604 Y85.352 E0.03820 ; infill
G1 X34.604 Y84.818 E0.01677 ; infill
G1 X33.743 Y83.958 E0.03820 ; infill
G1 X33.743 Y83.424 E0.01677 ; infill
G1 X34.604 Y84.284 E0.03820 ; infill
G1 X34.604 Y83.750 E0.01677 ; infill
G1 X33.743 Y82.890 E0.03820 ; infill
G1 X33.743 Y82.356 E0.01677 ; infill
G1 X34.604 Y83.216 E0.03820 ; infill
G1 X34.604 Y82.682 E0.01677 ; infill
G1 X33.743 Y81.822 E0.03820 ; infill
G1 X33.743 Y81.288 E0.01677 ; infill
G1 X34.604 Y82.148 E0.03820 ; infill
G1 X34.604 Y81.614 E0.01677 ; infill
G1 X33.743 Y80.754 E0.03820 ; infill
G1 X33.743 Y80.220 E0.01677 ; infill
G1 X34.604 Y81.080 E0.03820 ; infill
G1 X34.604 Y80.546 E0.01677 ; infill
G1 X33.743 Y79.686 E0.03820 ; infill
G1 X33.743 Y79.152 E0.01677 ; infill
G1 X34.604 Y80.012 E0.03820 ; infill
G1 X34.604 Y79.478 E0.01677 ; infill
G1 X33.743 Y78.618 E0.03820 ; infill
G1 X33.743 Y78.084 E0.01677 ; infill
G1 X34.604 Y78.944 E0.03820 ; infill
G1 X34.604 Y78.410 E0.01677 ; infill
G1 X33.743 Y77.550 E0.03820 ; infill
G1 X33.743 Y77.016 E0.01677 ; infill
G1 X34.604 Y77.876 E0.03820 ; infill
G1 X34.604 Y77.645 E0.00726 ; infill
G1 X34.906 Y77.645 E0.00950 ; infill
G1 X33.743 Y76.482 E0.05164 ; infill
G1 X33.743 Y75.948 E0.01677 ; infill
G1 X35.440 Y77.645 E0.07535 ; infill
G1 X35.974 Y77.645 E0.01677 ; infill
G1 X33.743 Y75.414 E0.09906 ; infill
G1 X33.771 Y74.907 E0.01593 ; infill
G1 X36.508 Y77.645 E0.12155 ; infill
G1 X37.042 Y77.645 E0.01677 ; infill
G1 X33.814 Y74.416 E0.14335 ; infill
G1 X33.917 Y73.986 E0.01390 ; infill
G1 X37.576 Y77.645 E0.16247 ; infill
G1 X38.110 Y77.645 E0.01677 ; infill
G1 X34.037 Y73.572 E0.18084 ; infill
G1 X34.194 Y73.194 E0.01283 ; infill
G1 X38.644 Y77.645 E0.19760 ; infill
G1 X39.178 Y77.645 E0.01677 ; infill
G1 X34.370 Y72.837 E0.21349 ; infill
G1 X34.573 Y72.506 E0.01219 ; infill
G1 X39.712 Y77.645 E0.22819 ; infill
G1 X40.246 Y77.645 E0.01677 ; infill
G1 X34.795 Y72.193 E0.24206 ; infill
G1 X35.041 Y71.905 E0.01189 ; infill
G1 X40.780 Y77.645 E0.25485 ; infill
G1 X41.314 Y77.645 E0.01677 ; infill
G1 X35.303 Y71.634 E0.26690 ; infill
G1 X35.591 Y71.388 E0.01189 ; infill
G1 X41.848 Y77.645 E0.27782 ; infill
G1 X42.382 Y77.645 E0.01677 ; infill
G1 X35.895 Y71.157 E0.28807 ; infill
G1 X36.226 Y70.954 E0.01219 ; infill
G1 X42.916 Y77.645 E0.29708 ; infill
G1 X43.450 Y77.645 E0.01677 ; infill
G1 X36.574 Y70.768 E0.30534 ; infill
G1 X36.951 Y70.612 E0.01283 ; infill
G1 X43.984 Y77.645 E0.31228 ; infill
G1 X44.518 Y77.645 E0.01677 ; infill
G1 X37.354 Y70.480 E0.31812 ; infill
G1 X37.784 Y70.377 E0.01390 ; infill
G1 X45.052 Y77.645 E0.32271 ; infill
G1 X45.586 Y77.645 E0.01677 ; infill
G1 X38.262 Y70.320 E0.32522 ; infill
G1 X38.760 Y70.285 E0.01568 ; infill
G1 X46.120 Y77.645 E0.32681 ; infill
G1 X46.654 Y77.645 E0.01677 ; infill
G1 X39.294 Y70.285 E0.32681 ; infill
G1 X39.828 Y70.285 E0.01677 ; infill
G1 X47.188 Y77.645 E0.32681 ; infill
G1 X47.722 Y77.645 E0.01677 ; infill
G1 X40.362 Y70.285 E0.32681 ; infill
G1 X40.896 Y70.285 E0.01677 ; infill
G1 X48.256 Y77.645 E0.32680 ; infill
G1 X48.790 Y77.645 E0.01677 ; infill
G1 X41.430 Y70.285 E0.32680 ; infill
G1 X41.964 Y70.285 E0.01677 ; infill
G1 X49.324 Y77.645 E0.32680 ; infill
G1 X49.858 Y77.645 E0.01677 ; infill
G1 X42.498 Y70.285 E0.32680 ; infill
G1 X43.032 Y70.285 E0.01677 ; infill
G1 X50.392 Y77.645 E0.32680 ; infill
G1 X50.914 Y77.645 E0.01637 ; infill
G1 X43.566 Y70.285 E0.32652 ; infill
G1 X44.100 Y70.285 E0.01677 ; infill
G1 X51.187 Y77.372 E0.31466 ; infill
G1 X51.454 Y77.105 E0.01186 ; infill
G1 X44.634 Y70.285 E0.30280 ; infill
G1 X45.168 Y70.285 E0.01677 ; infill
G1 X51.721 Y76.838 E0.29095 ; infill
G1 X51.881 Y76.677 E0.00711 ; infill
G1 X51.881 Y76.464 E0.00671 ; infill
G1 X45.702 Y70.285 E0.27435 ; infill
G1 X46.236 Y70.285 E0.01677 ; infill
G1 X51.881 Y75.930 E0.25064 ; infill
G1 X51.881 Y75.396 E0.01677 ; infill
G1 X46.770 Y70.285 E0.22693 ; infill
G1 X47.304 Y70.285 E0.01677 ; infill
G1 X51.881 Y74.862 E0.20321 ; infill
G1 X51.881 Y74.328 E0.01677 ; infill
G1 X47.838 Y70.285 E0.17950 ; infill
G1 X48.372 Y70.285 E0.01677 ; infill
G1 X51.881 Y73.794 E0.15579 ; infill
G1 X51.881 Y73.260 E0.01677 ; infill
G1 X48.906 Y70.285 E0.13208 ; infill
G1 X49.441 Y70.285 E0.01677 ; infill
G1 X51.881 Y72.726 E0.10837 ; infill
G1 X51.881 Y72.192 E0.01677 ; infill
G1 X49.975 Y70.285 E0.08465 ; infill
G1 X50.509 Y70.285 E0.01677 ; infill
G1 X51.881 Y71.658 E0.06094 ; infill
G1 X51.881 Y71.145 E0.01611 ; infill
G1 X51.902 Y71.145 E0.00066 ; infill
G1 X51.043 Y70.285 E0.03816 ; infill
G1 X51.577 Y70.285 E0.01677 ; infill
G1 X52.436 Y71.145 E0.03816 ; infill
G1 X52.970 Y71.145 E0.01677 ; infill
G1 X52.111 Y70.285 E0.03816 ; infill
G1 X52.645 Y70.285 E0.01677 ; infill
G1 X53.504 Y71.145 E0.03816 ; infill
G1 X54.038 Y71.145 E0.01677 ; infill
G1 X53.179 Y70.285 E0.03816 ; infill
G1 X53.713 Y70.285 E0.01677 ; infill
G1 X54.572 Y71.145 E0.03816 ; infill
G1 X55.106 Y71.145 E0.01677 ; infill
G1 X54.247 Y70.286 E0.03815 ; infill
G1 X54.781 Y70.286 E0.01677 ; infill
G1 X55.640 Y71.145 E0.03815 ; infill
G1 X56.174 Y71.145 E0.01677 ; infill
G1 X55.315 Y70.286 E0.03815 ; infill
G1 X55.849 Y70.286 E0.01677 ; infill
G1 X56.708 Y71.145 E0.03815 ; infill
G1 X57.242 Y71.145 E0.01677 ; infill
G1 X56.383 Y70.286 E0.03815 ; infill
G1 X56.917 Y70.286 E0.01677 ; infill
G1 X57.776 Y71.145 E0.03815 ; infill
G1 X58.310 Y71.145 E0.01677 ; infill
G1 X57.451 Y70.286 E0.03815 ; infill
G1 X57.985 Y70.286 E0.01677 ; infill
G1 X58.844 Y71.145 E0.03814 ; infill
G1 X59.378 Y71.145 E0.01677 ; infill
G1 X58.519 Y70.286 E0.03814 ; infill
G1 X59.053 Y70.286 E0.01677 ; infill
G1 X59.912 Y71.145 E0.03814 ; infill
G1 X60.446 Y71.145 E0.01677 ; infill
G1 X59.587 Y70.286 E0.03814 ; infill
G1 X60.121 Y70.286 E0.01677 ; infill
G1 X60.980 Y71.145 E0.03814 ; infill
G1 X61.514 Y71.145 E0.01677 ; infill
G1 X60.655 Y70.286 E0.03814 ; infill
G1 X61.189 Y70.286 E0.01677 ; infill
G1 X62.048 Y71.145 E0.03813 ; infill
G1 X62.582 Y71.145 E0.01677 ; infill
G1 X61.723 Y70.286 E0.03813 ; infill
G1 X62.257 Y70.286 E0.01677 ; infill
G1 X63.116 Y71.145 E0.03813 ; infill
G1 X63.650 Y71.145 E0.01677 ; infill
G1 X62.791 Y70.286 E0.03813 ; infill
G1 X63.325 Y70.286 E0.01677 ; infill
G1 X64.184 Y71.145 E0.03813 ; infill
G1 X64.718 Y71.145 E0.01677 ; infill
G1 X63.859 Y70.286 E0.03813 ; infill
G1 X64.393 Y70.286 E0.01677 ; infill
G1 X65.252 Y71.145 E0.03813 ; infill
G1 X65.786 Y71.145 E0.01677 ; infill
G1 X64.927 Y70.286 E0.03812 ; infill
G1 X65.461 Y70.286 E0.01677 ; infill
G1 X66.320 Y71.145 E0.03812 ; infill
G1 X66.854 Y71.145 E0.01677 ; infill
G1 X65.995 Y70.286 E0.03812 ; infill
G1 X66.529 Y70.286 E0.01677 ; infill
G1 X67.388 Y71.145 E0.03812 ; infill
G1 X67.922 Y71.145 E0.01677 ; infill
G1 X67.063 Y70.286 E0.03812 ; infill
G1 X67.598 Y70.286 E0.01677 ; infill
G1 X68.456 Y71.145 E0.03812 ; infill
G1 X68.990 Y71.145 E0.01677 ; infill
G1 X68.132 Y70.286 E0.03812 ; infill
G1 X68.666 Y70.286 E0.01677 ; infill
G1 X69.524 Y71.145 E0.03811 ; infill
G1 X70.058 Y71.145 E0.01677 ; infill
G1 X69.200 Y70.286 E0.03811 ; infill
G1 X69.734 Y70.286 E0.01677 ; infill
G1 X70.592 Y71.145 E0.03811 ; infill
G1 X71.126 Y71.145 E0.01677 ; infill
G1 X70.268 Y70.287 E0.03811 ; infill
G1 X70.802 Y70.287 E0.01677 ; infill
G1 X71.660 Y71.145 E0.03811 ; infill
G1 X72.194 Y71.145 E0.01677 ; infill
G1 X71.336 Y70.287 E0.03811 ; infill
G1 X71.870 Y70.287 E0.01677 ; infill
G1 X72.728 Y71.145 E0.03810 ; infill
G1 X73.262 Y71.145 E0.01677 ; infill
G1 X72.404 Y70.287 E0.03810 ; infill
G1 X72.938 Y70.287 E0.01677 ; infill
G1 X73.796 Y71.145 E0.03810 ; infill
G1 X74.330 Y71.145 E0.01677 ; infill
G1 X73.472 Y70.287 E0.03810 ; infill
G1 X74.006 Y70.287 E0.01677 ; infill
G1 X74.864 Y71.145 E0.03810 ; infill
G1 X75.398 Y71.145 E0.01677 ; infill
G1 X74.540 Y70.287 E0.03810 ; infill
G1 X75.074 Y70.287 E0.01677 ; infill
G1 X75.932 Y71.145 E0.03810 ; infill
G1 X76.466 Y71.145 E0.01677 ; infill
G1 X75.608 Y70.287 E0.03809 ; infill
G1 X76.142 Y70.287 E0.01677 ; infill
G1 X77.000 Y71.145 E0.03809 ; infill
G1 X77.534 Y71.145 E0.01677 ; infill
G1 X76.676 Y70.287 E0.03809 ; infill
G1 X77.210 Y70.287 E0.01677 ; infill
G1 X78.068 Y71.145 E0.03809 ; infill
G1 X78.602 Y71.145 E0.01677 ; infill
G1 X77.744 Y70.287 E0.03809 ; infill
G1 X78.278 Y70.287 E0.01677 ; infill
G1 X79.136 Y71.145 E0.03809 ; infill
G1 X79.670 Y71.145 E0.01677 ; infill
G1 X78.812 Y70.287 E0.03809 ; infill
G1 X79.346 Y70.287 E0.01677 ; infill
G1 X80.204 Y71.145 E0.03808 ; infill
G1 X80.738 Y71.145 E0.01677 ; infill
G1 X79.880 Y70.287 E0.03808 ; infill
G1 X80.414 Y70.287 E0.01677 ; infill
G1 X81.272 Y71.145 E0.03808 ; infill
G1 X81.806 Y71.145 E0.01677 ; infill
G1 X80.948 Y70.287 E0.03808 ; infill
G1 X81.482 Y70.287 E0.01677 ; infill
G1 X82.340 Y71.145 E0.03808 ; infill
G1 X82.874 Y71.145 E0.01677 ; infill
G1 X82.016 Y70.287 E0.03808 ; infill
G1 X82.550 Y70.287 E0.01677 ; infill
G1 X83.408 Y71.145 E0.03808 ; infill
G1 X83.942 Y71.145 E0.01677 ; infill
G1 X83.084 Y70.287 E0.03807 ; infill
G1 X83.618 Y70.287 E0.01677 ; infill
G1 X84.476 Y71.145 E0.03807 ; infill
G1 X85.010 Y71.145 E0.01677 ; infill
G1 X84.152 Y70.287 E0.03807 ; infill
G1 X84.686 Y70.287 E0.01677 ; infill
G1 X85.544 Y71.145 E0.03807 ; infill
G1 X86.078 Y71.145 E0.01677 ; infill
G1 X85.220 Y70.287 E0.03807 ; infill
G1 X85.755 Y70.287 E0.01677 ; infill
G1 X86.612 Y71.145 E0.03807 ; infill
G1 X87.146 Y71.145 E0.01677 ; infill
G1 X86.289 Y70.288 E0.03806 ; infill
G1 X86.823 Y70.288 E0.01677 ; infill
G1 X87.680 Y71.145 E0.03806 ; infill
G1 X88.214 Y71.145 E0.01677 ; infill
G1 X87.357 Y70.288 E0.03806 ; infill
G1 X87.891 Y70.288 E0.01677 ; infill
G1 X88.748 Y71.145 E0.03806 ; infill
G1 X89.282 Y71.145 E0.01677 ; infill
G1 X88.425 Y70.288 E0.03806 ; infill
G1 X88.959 Y70.288 E0.01677 ; infill
G1 X89.816 Y71.145 E0.03806 ; infill
G1 X90.350 Y71.145 E0.01677 ; infill
G1 X89.493 Y70.288 E0.03806 ; infill
G1 X90.027 Y70.288 E0.01677 ; infill
G1 X90.884 Y71.145 E0.03805 ; infill
G1 X91.418 Y71.145 E0.01677 ; infill
G1 X90.561 Y70.288 E0.03805 ; infill
G1 X91.095 Y70.288 E0.01677 ; infill
G1 X91.952 Y71.145 E0.03805 ; infill
G1 X92.486 Y71.145 E0.01677 ; infill
G1 X91.629 Y70.288 E0.03805 ; infill
G1 X92.163 Y70.288 E0.01677 ; infill
G1 X93.020 Y71.145 E0.03805 ; infill
G1 X93.554 Y71.145 E0.01677 ; infill
G1 X92.697 Y70.288 E0.03805 ; infill
G1 X93.231 Y70.288 E0.01677 ; infill
G1 X94.088 Y71.145 E0.03805 ; infill
G1 X94.622 Y71.145 E0.01677 ; infill
G1 X93.765 Y70.288 E0.03804 ; infill
G1 X94.299 Y70.288 E0.01677 ; infill
G1 X95.156 Y71.145 E0.03804 ; infill
G1 X95.690 Y71.145 E0.01677 ; infill
G1 X94.833 Y70.288 E0.03804 ; infill
G1 X95.367 Y70.288 E0.01677 ; infill
G1 X96.224 Y71.145 E0.03804 ; infill
G1 X96.758 Y71.145 E0.01677 ; infill
G1 X95.901 Y70.288 E0.03804 ; infill
G1 X96.435 Y70.288 E0.01677 ; infill
G1 X97.292 Y71.145 E0.03804 ; infill
G1 X97.826 Y71.145 E0.01677 ; infill
G1 X96.969 Y70.288 E0.03803 ; infill
G1 X97.503 Y70.288 E0.01677 ; infill
G1 X98.360 Y71.145 E0.03803 ; infill
G1 X98.894 Y71.145 E0.01677 ; infill
G1 X98.037 Y70.288 E0.03803 ; infill
G1 X98.571 Y70.288 E0.01677 ; infill
G1 X99.428 Y71.145 E0.03803 ; infill
G1 X99.962 Y71.145 E0.01677 ; infill
G1 X99.105 Y70.288 E0.03803 ; infill
G1 X99.639 Y70.288 E0.01677 ; infill
G1 X100.496 Y71.145 E0.03803 ; infill
G1 X101.030 Y71.145 E0.01677 ; infill
G1 X100.173 Y70.288 E0.03803 ; infill
G1 X100.707 Y70.288 E0.01677 ; infill
G1 X101.564 Y71.145 E0.03802 ; infill
G1 X102.098 Y71.145 E0.01677 ; infill
G1 X101.241 Y70.288 E0.03802 ; infill
G1 X101.775 Y70.288 E0.01677 ; infill
G1 X102.632 Y71.145 E0.03802 ; infill
G1 X103.192 Y71.171 E0.01760 ; infill
G1 X102.309 Y70.289 E0.03917 ; infill
G1 X102.843 Y70.289 E0.01677 ; infill
G1 X103.813 Y71.258 E0.04306 ; infill
G1 X104.193 Y71.350 E0.01227 ; infill
G1 X104.612 Y71.523 E0.01422 ; infill
G1 X103.229 Y70.141 E0.06138 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X104.612 Y71.523 E-0.51591 ; wipe and retract
G1 X104.193 Y71.350 E-0.11956 ; wipe and retract
G1 X103.813 Y71.258 E-0.10313 ; wipe and retract
G1 X102.843 Y70.289 E-0.36196 ; wipe and retract
G1 X102.309 Y70.289 E-0.14092 ; wipe and retract
G1 X103.192 Y71.171 E-0.32925 ; wipe and retract
G1 X102.632 Y71.145 E-0.14793 ; wipe and retract
G1 X101.775 Y70.288 E-0.31957 ; wipe and retract
G1 X101.241 Y70.288 E-0.14092 ; wipe and retract
G1 X101.512 Y70.559 E-0.10084 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X42.349 Y81.766 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X42.312 Y81.885 E0.00054 ; infill
G1 X42.176 Y82.565 F10800.000 ; move to first infill point
G1 F1800.000
G1 X42.164 Y82.697 E0.00057 ; infill
G1 X42.172 Y83.001 F10800.000 ; move to first infill point
G1 F1800.000
G1 X42.191 Y83.194 E0.00090 ; infill
G1 X42.243 Y83.495 F10800.000 ; move to first infill point
G1 F1800.000
G1 X42.280 Y83.620 E0.00057 ; infill
G1 X42.545 Y84.263 F10800.000 ; move to first infill point
G1 F1800.000
G1 X42.608 Y84.378 E0.00056 ; infill
G1 X42.784 Y84.627 F10800.000 ; move to first infill point
G1 F1800.000
G1 X42.907 Y84.777 E0.00089 ; infill
G1 X43.117 Y84.998 F10800.000 ; move to first infill point
G1 F1800.000
G1 X43.217 Y85.082 E0.00057 ; infill
G1 X43.795 Y85.469 F10800.000 ; move to first infill point
G1 F1800.000
G1 X43.911 Y85.530 E0.00057 ; infill
G1 X44.711 Y85.772 F10800.000 ; move to first infill point
G1 F1800.000
G1 X45.157 Y85.834 E0.00315 ; infill
G1 X45.648 Y85.762 E0.00348 ; infill
G1 X45.925 Y85.698 F10800.000 ; move to first infill point
G1 F1800.000
G1 X46.119 Y85.639 E0.00094 ; infill
G1 X46.402 Y85.530 F10800.000 ; move to first infill point
G1 F1800.000
G1 X46.519 Y85.470 E0.00057 ; infill
G1 X47.096 Y85.084 F10800.000 ; move to first infill point
G1 F1800.000
G1 X47.197 Y85.000 E0.00057 ; infill
G1 X47.407 Y84.779 F10800.000 ; move to first infill point
G1 F1800.000
G1 X47.530 Y84.629 E0.00090 ; infill
G1 X47.706 Y84.380 F10800.000 ; move to first infill point
G1 F1800.000
G1 X47.770 Y84.264 E0.00057 ; infill
G1 X48.036 Y83.621 F10800.000 ; move to first infill point
G1 F1800.000
G1 X48.072 Y83.497 E0.00056 ; infill
G1 X48.124 Y83.196 F10800.000 ; move to first infill point
G1 F1800.000
G1 X48.143 Y83.004 E0.00089 ; infill
G1 X48.151 Y82.699 F10800.000 ; move to first infill point
G1 F1800.000
G1 X48.140 Y82.568 E0.00057 ; infill
G1 X48.005 Y81.887 F10800.000 ; move to first infill point
G1 F1800.000
G1 X47.965 Y81.761 E0.00057 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.005 Y81.887 E-0.03480 ; wipe and retract
G1 E-2.36520 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X51.496 Y88.434 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X50.859 Y87.797 E0.02850 ; infill
G1 X50.329 Y87.805 E0.01675 ; infill
G1 X51.349 Y88.824 E0.04557 ; infill
G1 X51.435 Y89.448 E0.01992 ; infill
G1 X50.202 Y88.215 E0.05513 ; infill
G1 X50.274 Y88.825 E0.01941 ; infill
G1 X51.383 Y89.933 E0.04958 ; infill
G1 X51.085 Y90.173 E0.01209 ; infill
G1 X50.150 Y89.239 E0.04180 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X51.085 Y90.173 E-0.34884 ; wipe and retract
G1 X51.383 Y89.933 E-0.10093 ; wipe and retract
G1 X50.274 Y88.825 E-0.41382 ; wipe and retract
G1 X50.202 Y88.215 E-0.16201 ; wipe and retract
G1 X51.435 Y89.448 E-0.46014 ; wipe and retract
G1 X51.349 Y88.824 E-0.16623 ; wipe and retract
G1 X50.329 Y87.805 E-0.38035 ; wipe and retract
G1 X50.859 Y87.797 E-0.13978 ; wipe and retract
G1 X51.148 Y88.086 E-0.10789 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X47.726 Y88.311 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X47.500 Y88.311 E0.00107 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X47.726 Y88.311 E-0.05943 ; wipe and retract
G1 E-2.34057 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X45.156 Y88.629 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X45.156 Y88.115 E0.00870 ; infill
G1 X45.156 Y87.969 E0.00229 ; infill
G1 X45.155 Y87.824 E0.00173 ; infill
G1 X45.155 Y87.678 E0.00117 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X45.155 Y87.824 E-0.03837 ; wipe and retract
G1 E-2.36163 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X42.286 Y88.311 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X36.187 Y88.311 E0.03112 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X42.286 Y88.311 E-1.60942 ; wipe and retract
G1 E-0.79058 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X36.168 Y93.551 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X42.070 Y93.540 E0.02794 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X36.168 Y93.551 E-1.55752 ; wipe and retract
G1 E-0.84248 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X44.466 Y93.449 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X45.300 Y94.282 E0.04280 ; infill
G1 X45.644 Y94.282 E0.01252 ; infill
G1 X45.691 Y94.056 E0.00840 ; infill
G1 X44.714 Y93.079 E0.05019 ; infill
G1 X44.748 Y92.826 E0.00924 ; infill
G1 X45.079 Y92.826 E0.01204 ; infill
G1 X45.917 Y93.664 E0.04301 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X45.079 Y92.826 E-0.31245 ; wipe and retract
G1 X44.748 Y92.826 E-0.08747 ; wipe and retract
G1 X44.714 Y93.079 E-0.06716 ; wipe and retract
G1 X45.691 Y94.056 E-0.36466 ; wipe and retract
G1 X45.644 Y94.282 E-0.06104 ; wipe and retract
G1 X45.300 Y94.282 E-0.09097 ; wipe and retract
G1 X44.466 Y93.449 E-0.31094 ; wipe and retract
G1 E-1.10530 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X48.134 Y93.700 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X48.537 Y93.700 E0.00191 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.134 Y93.700 E-0.10656 ; wipe and retract
G1 E-2.29344 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X50.847 Y93.419 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X50.833 Y93.707 E0.00232 ; infill
G1 X50.885 Y94.373 E0.00539 ; infill
G1 X51.251 Y96.142 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X50.927 Y95.817 E0.01443 ; infill
G1 X50.784 Y96.210 E0.01313 ; infill
G1 X51.298 Y96.724 E0.02284 ; infill
G1 X51.573 Y97.420 E0.02352 ; infill
G1 X51.576 Y97.537 E0.00368 ; infill
G1 X50.642 Y96.603 E0.04151 ; infill
G1 X50.500 Y96.995 E0.01313 ; infill
G1 X51.593 Y98.088 E0.04856 ; infill
G1 X51.609 Y98.639 E0.01733 ; infill
G1 X50.358 Y97.388 E0.05560 ; infill
G1 X50.341 Y97.437 E0.00165 ; infill
G1 X50.340 Y97.904 E0.01468 ; infill
G1 X51.625 Y99.190 E0.05715 ; infill
G1 X51.642 Y99.741 E0.01733 ; infill
G1 X50.339 Y98.438 E0.05790 ; infill
G1 X50.339 Y98.972 E0.01679 ; infill
G1 X51.282 Y99.915 E0.04192 ; infill
G1 X50.754 Y99.922 E0.01659 ; infill
G1 X50.168 Y99.337 E0.02603 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X50.754 Y99.922 E-0.21849 ; wipe and retract
G1 X51.282 Y99.915 E-0.13924 ; wipe and retract
G1 X50.339 Y98.972 E-0.35189 ; wipe and retract
G1 X50.339 Y98.438 E-0.14092 ; wipe and retract
G1 X51.642 Y99.741 E-0.48605 ; wipe and retract
G1 X51.625 Y99.190 E-0.14548 ; wipe and retract
G1 X50.340 Y97.904 E-0.47970 ; wipe and retract
G1 X50.341 Y97.437 E-0.12323 ; wipe and retract
G1 X50.358 Y97.388 E-0.01383 ; wipe and retract
G1 X50.844 Y97.873 E-0.18117 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X50.537 Y105.310 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X49.823 Y104.595 E0.03274 ; infill
G1 X49.272 Y104.595 E0.01785 ; infill
G1 X50.411 Y105.735 E0.05223 ; infill
G1 X50.441 Y106.012 E0.00902 ; infill
G1 X50.372 Y106.246 E0.00791 ; infill
G1 X48.721 Y104.595 E0.07565 ; infill
G1 X48.170 Y104.595 E0.01785 ; infill
G1 X50.246 Y106.672 E0.09514 ; infill
G1 X50.121 Y107.097 E0.01437 ; infill
G1 X47.660 Y104.637 E0.11272 ; infill
G1 X47.608 Y105.135 E0.01623 ; infill
G1 X49.995 Y107.523 E0.10938 ; infill
G1 X49.869 Y107.948 E0.01437 ; infill
G1 X47.555 Y105.634 E0.10605 ; infill
G1 X47.515 Y106.012 E0.01233 ; infill
G1 X47.570 Y106.200 E0.00635 ; infill
G1 X49.744 Y108.374 E0.09958 ; infill
G1 X49.618 Y108.799 E0.01437 ; infill
G1 X47.801 Y106.982 E0.08326 ; infill
G1 X48.032 Y107.764 E0.02641 ; infill
G1 X49.493 Y109.225 E0.06694 ; infill
G1 X49.438 Y109.409 E0.00624 ; infill
G1 X49.435 Y109.718 E0.01000 ; infill
G1 X48.263 Y108.545 E0.05372 ; infill
G1 X48.493 Y109.327 E0.02641 ; infill
G1 X49.430 Y110.263 E0.04290 ; infill
G1 X49.426 Y110.616 E0.01142 ; infill
G1 X49.451 Y110.836 E0.00719 ; infill
G1 X48.535 Y109.920 E0.04197 ; infill
G1 X48.559 Y110.495 E0.01863 ; infill
G1 X49.487 Y111.422 E0.04250 ; infill
G1 X49.407 Y111.894 E0.01549 ; infill
G1 X48.583 Y111.069 E0.03777 ; infill
G1 X48.606 Y111.644 E0.01863 ; infill
G1 X49.339 Y112.377 E0.03360 ; infill
G1 X49.299 Y112.887 E0.01659 ; infill
G1 X48.630 Y112.218 E0.03065 ; infill
G1 X48.653 Y112.793 E0.01862 ; infill
G1 X49.279 Y113.419 E0.02870 ; infill
G1 X49.260 Y113.951 E0.01723 ; infill
G1 X48.641 Y113.332 E0.02836 ; infill
G1 X48.602 Y113.843 E0.01663 ; infill
G1 X49.241 Y114.482 E0.02927 ; infill
G1 X49.221 Y115.014 E0.01723 ; infill
G1 X48.582 Y114.375 E0.02929 ; infill
G1 X48.691 Y114.805 E0.01437 ; infill
G1 X48.715 Y115.059 E0.00827 ; infill
G1 X49.202 Y115.546 E0.02230 ; infill
G1 X49.182 Y116.077 E0.01723 ; infill
G1 X48.760 Y115.655 E0.01936 ; infill
G1 X48.780 Y116.225 E0.01850 ; infill
G1 X49.163 Y116.609 E0.01757 ; infill
G1 X49.144 Y117.140 E0.01723 ; infill
G1 X48.799 Y116.796 E0.01578 ; infill
G1 X48.819 Y117.367 E0.01850 ; infill
G1 X49.124 Y117.672 E0.01398 ; infill
G1 X49.105 Y118.204 E0.01723 ; infill
G1 X48.839 Y117.937 E0.01219 ; infill
G1 X48.858 Y118.508 E0.01850 ; infill
G1 X49.249 Y118.899 E0.01790 ; infill
G1 X48.977 Y119.264 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X48.976 Y119.821 E0.01632 ; infill
G1 X48.975 Y120.378 E0.01475 ; infill
G1 X48.973 Y120.935 E0.01318 ; infill
G1 X48.904 Y122.264 E0.02771 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.973 Y120.935 E-0.35107 ; wipe and retract
G1 E-2.04893 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X46.264 Y122.248 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X44.379 Y122.248 E0.00892 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X46.264 Y122.248 E-0.49749 ; wipe and retract
G1 E-1.90251 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X41.283 Y122.614 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X41.283 Y122.869 E0.00382 ; infill
G1 X41.283 Y123.123 E0.00277 ; infill
G1 X41.283 Y123.401 E0.00188 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X41.283 Y123.123 E-0.07343 ; wipe and retract
G1 E-2.32657 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X38.188 Y122.247 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X35.761 Y122.247 E0.01238 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X38.188 Y122.247 E-0.64041 ; wipe and retract
G1 E-1.75959 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X39.694 Y118.881 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X38.281 Y117.468 E0.06268 ; infill
G1 X38.280 Y116.934 E0.01677 ; infill
G1 X40.057 Y118.711 E0.07887 ; infill
G1 X40.591 Y118.711 E0.01674 ; infill
G1 X38.279 Y116.399 E0.10258 ; infill
G1 X38.278 Y115.865 E0.01677 ; infill
G1 X41.125 Y118.711 E0.12630 ; infill
G1 X41.658 Y118.711 E0.01674 ; infill
G1 X38.277 Y115.330 E0.15001 ; infill
G1 X38.276 Y114.796 E0.01677 ; infill
G1 X42.158 Y118.677 E0.17221 ; infill
G1 X42.342 Y118.637 E0.00591 ; infill
G1 X42.549 Y118.534 E0.00725 ; infill
G1 X38.252 Y114.238 E0.19065 ; infill
G1 X38.187 Y113.640 E0.01887 ; infill
G1 X42.847 Y118.299 E0.20674 ; infill
G1 X43.010 Y118.084 E0.00848 ; infill
G1 X43.063 Y117.981 E0.00361 ; infill
G1 X38.163 Y113.081 E0.21741 ; infill
G1 X38.218 Y112.603 E0.01511 ; infill
G1 X43.143 Y117.527 E0.21850 ; infill
G1 X43.144 Y116.995 E0.01670 ; infill
G1 X38.261 Y112.112 E0.21667 ; infill
G1 X38.277 Y111.594 E0.01624 ; infill
G1 X43.145 Y116.463 E0.21601 ; infill
G1 X43.146 Y115.930 E0.01670 ; infill
G1 X38.278 Y111.062 E0.21602 ; infill
G1 X38.279 Y110.529 E0.01671 ; infill
G1 X43.160 Y115.411 E0.21660 ; infill
G1 X43.203 Y114.920 E0.01547 ; infill
G1 X38.280 Y109.997 E0.21844 ; infill
G1 X38.281 Y109.464 E0.01671 ; infill
G1 X43.260 Y114.443 E0.22093 ; infill
G1 X43.281 Y114.269 E0.00551 ; infill
G1 X43.237 Y113.887 E0.01205 ; infill
G1 X38.287 Y108.937 E0.21963 ; infill
G1 X38.316 Y108.432 E0.01588 ; infill
G1 X43.173 Y113.289 E0.21553 ; infill
G1 X43.147 Y112.729 E0.01758 ; infill
G1 X38.344 Y107.926 E0.21311 ; infill
G1 X38.409 Y107.458 E0.01484 ; infill
G1 X43.146 Y112.195 E0.21019 ; infill
G1 X43.145 Y111.661 E0.01676 ; infill
G1 X38.494 Y107.010 E0.20637 ; infill
G1 X38.522 Y106.872 E0.00440 ; infill
G1 X38.597 Y106.578 E0.00952 ; infill
G1 X43.145 Y111.126 E0.20179 ; infill
G1 X43.144 Y110.592 E0.01676 ; infill
G1 X38.714 Y106.162 E0.19653 ; infill
G1 X38.846 Y105.761 E0.01327 ; infill
G1 X43.143 Y110.058 E0.19066 ; infill
G1 X43.142 Y109.523 E0.01676 ; infill
G1 X38.993 Y105.374 E0.18412 ; infill
G1 X39.155 Y105.002 E0.01272 ; infill
G1 X43.139 Y108.986 E0.17675 ; infill
G1 X43.107 Y108.421 E0.01776 ; infill
G1 X39.328 Y104.642 E0.16766 ; infill
G1 X39.512 Y104.292 E0.01240 ; infill
G1 X43.069 Y107.849 E0.15782 ; infill
G1 X42.970 Y107.216 E0.02010 ; infill
G1 X39.709 Y103.955 E0.14468 ; infill
G1 X39.923 Y103.635 E0.01207 ; infill
G1 X42.813 Y106.526 E0.12826 ; infill
G1 X42.574 Y105.754 E0.02536 ; infill
G1 X40.182 Y103.361 E0.10617 ; infill
G1 X40.466 Y103.202 E0.01022 ; infill
G1 X40.539 Y103.185 E0.00237 ; infill
G1 X42.532 Y105.177 E0.08841 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X40.539 Y103.185 E-0.74358 ; wipe and retract
G1 X40.466 Y103.202 E-0.01991 ; wipe and retract
G1 X40.182 Y103.361 E-0.08593 ; wipe and retract
G1 X42.574 Y105.754 E-0.89301 ; wipe and retract
G1 X42.813 Y106.526 E-0.21334 ; wipe and retract
G1 X41.944 Y105.657 E-0.32424 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X45.767 Y114.261 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X46.134 Y114.261 E0.00187 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X45.767 Y114.261 E-0.09665 ; wipe and retract
G1 E-2.30335 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X51.984 Y111.394 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X53.409 Y111.394 E0.00674 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X51.984 Y111.394 E-0.37609 ; wipe and retract
G1 E-2.02391 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X66.720 Y93.711 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X66.570 Y93.812 E0.00298 ; infill
G1 X66.469 Y93.787 E0.00172 ; infill
G1 X66.368 Y93.761 E0.00153 ; infill
G1 X66.266 Y93.735 E0.00119 ; infill
G1 X66.165 Y93.710 E0.00085 ; infill
G1 X66.074 Y93.698 E0.00046 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X66.165 Y93.710 E-0.02417 ; wipe and retract
G1 E-2.37583 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X63.265 Y91.566 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X62.876 Y91.789 E0.00212 ; infill
G1 X62.585 Y91.878 E0.00398 ; infill
G1 X62.841 Y91.732 F10800.000 ; move to first infill point
G1 F1800.000
G1 X62.745 Y91.829 E0.00243 ; infill
G1 X62.650 Y91.927 E0.00214 ; infill
G1 X62.518 Y92.081 E0.00275 ; infill
G1 X62.394 Y92.227 E0.00200 ; infill
G1 X62.269 Y92.372 E0.00144 ; infill
G1 X62.203 Y92.460 E0.00050 ; infill
G1 X61.033 Y90.960 F10800.000 ; move to first infill point
G1 F1800.000
G1 X60.635 Y90.801 E0.00203 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X61.033 Y90.960 E-0.11314 ; wipe and retract
G1 E-2.28686 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X56.272 Y90.078 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X57.008 Y90.813 E0.03266 ; infill
G1 X57.542 Y90.813 E0.01678 ; infill
G1 X56.365 Y89.637 E0.05227 ; infill
G1 X56.385 Y89.122 E0.01616 ; infill
G1 X57.998 Y90.735 E0.07164 ; infill
G1 X58.111 Y90.314 E0.01369 ; infill
G1 X56.396 Y88.599 E0.07619 ; infill
G1 X56.376 Y88.045 E0.01740 ; infill
G1 X58.107 Y89.776 E0.07688 ; infill
G1 X58.102 Y89.237 E0.01694 ; infill
G1 X56.337 Y87.471 E0.07842 ; infill
G1 X56.297 Y86.897 E0.01808 ; infill
G1 X58.108 Y88.708 E0.08046 ; infill
G1 X58.139 Y88.205 E0.01583 ; infill
G1 X56.257 Y86.323 E0.08361 ; infill
G1 X56.217 Y85.749 E0.01808 ; infill
G1 X58.170 Y87.702 E0.08676 ; infill
G1 X58.201 Y87.199 E0.01583 ; infill
G1 X56.177 Y85.175 E0.08992 ; infill
G1 X56.137 Y84.600 E0.01808 ; infill
G1 X58.232 Y86.696 E0.09307 ; infill
G1 X58.265 Y86.195 E0.01577 ; infill
G1 X56.097 Y84.026 E0.09632 ; infill
G1 X56.057 Y83.452 E0.01808 ; infill
G1 X58.309 Y85.704 E0.10003 ; infill
G1 X58.361 Y85.222 E0.01523 ; infill
G1 X56.056 Y82.917 E0.10239 ; infill
G1 X56.055 Y82.382 E0.01680 ; infill
G1 X58.433 Y84.760 E0.10562 ; infill
G1 X58.505 Y84.298 E0.01469 ; infill
G1 X56.054 Y81.847 E0.10886 ; infill
G1 X56.054 Y81.312 E0.01680 ; infill
G1 X58.516 Y83.774 E0.10936 ; infill
G1 X58.493 Y83.217 E0.01752 ; infill
G1 X56.053 Y80.777 E0.10837 ; infill
G1 X56.053 Y80.678 E0.00313 ; infill
G1 X55.844 Y80.156 E0.01766 ; infill
G1 X55.814 Y80.004 E0.00486 ; infill
G1 X58.484 Y82.674 E0.11861 ; infill
G1 X58.484 Y82.140 E0.01678 ; infill
G1 X55.834 Y79.490 E0.11770 ; infill
G1 X55.849 Y79.417 E0.00232 ; infill
G1 X55.906 Y79.247 E0.00564 ; infill
G1 X55.982 Y79.104 E0.00510 ; infill
G1 X58.484 Y81.606 E0.11112 ; infill
G1 X58.484 Y81.071 E0.01678 ; infill
G1 X56.204 Y78.792 E0.10125 ; infill
G1 X56.374 Y78.632 E0.00731 ; infill
G1 X56.496 Y78.550 E0.00464 ; infill
G1 X58.524 Y80.577 E0.09007 ; infill
G1 X58.676 Y80.195 E0.01291 ; infill
G1 X56.866 Y78.385 E0.08040 ; infill
G1 X57.077 Y78.341 E0.00675 ; infill
G1 X57.348 Y78.333 E0.00854 ; infill
G1 X58.903 Y79.887 E0.06904 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X57.348 Y78.333 E-0.58003 ; wipe and retract
G1 X57.077 Y78.341 E-0.07176 ; wipe and retract
G1 X56.866 Y78.385 E-0.05672 ; wipe and retract
G1 X58.676 Y80.195 E-0.67551 ; wipe and retract
G1 X58.524 Y80.577 E-0.10851 ; wipe and retract
G1 X56.496 Y78.550 E-0.75676 ; wipe and retract
G1 X56.400 Y78.614 E-0.03073 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X61.340 Y84.166 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X61.842 Y84.068 E0.00242 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X61.340 Y84.166 E-0.13494 ; wipe and retract
G1 E-2.26506 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X66.685 Y86.014 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X65.534 Y84.863 E0.05119 ; infill
G1 X65.068 Y84.287 E0.02331 ; infill
G1 X64.830 Y83.931 E0.01345 ; infill
G1 X64.434 Y83.429 E0.02011 ; infill
G1 X64.417 Y83.211 E0.00688 ; infill
G1 X67.439 Y86.234 E0.13442 ; infill
G1 X68.314 Y86.574 E0.02953 ; infill
G1 X64.351 Y82.610 E0.17627 ; infill
G1 X64.305 Y82.030 E0.01831 ; infill
G1 X69.265 Y86.990 E0.22057 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X64.305 Y82.030 E-1.85105 ; wipe and retract
G1 X64.351 Y82.610 E-0.15368 ; wipe and retract
G1 X65.088 Y83.348 E-0.27528 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.805 Y72.204 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X70.805 Y73.751 E0.00789 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.805 Y72.204 E-0.40822 ; wipe and retract
G1 E-1.99178 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X76.838 Y79.588 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X76.065 Y78.815 E0.03436 ; infill
G1 X75.472 Y78.259 E0.02555 ; infill
G1 X74.890 Y77.833 E0.02269 ; infill
G1 X74.131 Y77.416 E0.02723 ; infill
G1 X76.991 Y80.276 E0.12719 ; infill
G1 X77.118 Y80.589 E0.01061 ; infill
G1 X77.227 Y81.047 E0.01481 ; infill
G1 X73.252 Y77.072 E0.17677 ; infill
G1 X72.511 Y76.865 E0.02420 ; infill
G1 X77.302 Y81.656 E0.21306 ; infill
G1 X77.317 Y81.853 E0.00619 ; infill
G1 X77.296 Y82.186 E0.01049 ; infill
G1 X71.852 Y76.741 E0.24212 ; infill
G1 X71.399 Y76.676 E0.01437 ; infill
G1 X71.205 Y76.629 E0.00628 ; infill
G1 X72.523 Y77.947 E0.05862 ; infill
G1 X71.906 Y77.724 E0.02065 ; infill
G1 X71.730 Y77.689 E0.00564 ; infill
G1 X70.619 Y76.578 E0.04940 ; infill
G1 X70.185 Y76.679 E0.01400 ; infill
G1 X71.107 Y77.601 E0.04100 ; infill
G1 X70.756 Y77.582 E0.01105 ; infill
G1 X70.566 Y77.595 E0.00600 ; infill
G1 X69.720 Y76.748 E0.03763 ; infill
G1 X69.270 Y76.833 E0.01440 ; infill
G1 X70.085 Y77.648 E0.03625 ; infill
G1 X69.646 Y77.744 E0.01413 ; infill
G1 X68.838 Y76.936 E0.03594 ; infill
G1 X68.421 Y77.054 E0.01362 ; infill
G1 X69.247 Y77.879 E0.03671 ; infill
G1 X68.881 Y78.049 E0.01266 ; infill
G1 X68.024 Y77.192 E0.03814 ; infill
G1 X67.645 Y77.348 E0.01288 ; infill
G1 X68.540 Y78.242 E0.03978 ; infill
G1 X68.219 Y78.456 E0.01212 ; infill
G1 X67.282 Y77.520 E0.04165 ; infill
G1 X66.939 Y77.711 E0.01236 ; infill
G1 X67.934 Y78.706 E0.04423 ; infill
G1 X67.668 Y78.974 E0.01189 ; infill
G1 X66.609 Y77.916 E0.04709 ; infill
G1 X66.300 Y78.142 E0.01203 ; infill
G1 X67.420 Y79.262 E0.04981 ; infill
G1 X67.206 Y79.582 E0.01212 ; infill
G1 X66.007 Y78.383 E0.05332 ; infill
G1 X65.731 Y78.642 E0.01190 ; infill
G1 X67.017 Y79.928 E0.05720 ; infill
G1 X66.847 Y80.293 E0.01266 ; infill
G1 X65.466 Y78.913 E0.06140 ; infill
G1 X65.229 Y79.210 E0.01197 ; infill
G1 X66.712 Y80.693 E0.06594 ; infill
G1 X66.619 Y81.134 E0.01419 ; infill
G1 X65.008 Y79.524 E0.07162 ; infill
G1 X64.810 Y79.860 E0.01228 ; infill
G1 X66.570 Y81.620 E0.07827 ; infill
G1 X66.554 Y81.825 E0.00646 ; infill
G1 X66.576 Y82.161 E0.01059 ; infill
G1 X64.640 Y80.226 E0.08608 ; infill
G1 X64.488 Y80.608 E0.01295 ; infill
G1 X66.671 Y82.792 E0.09709 ; infill
G1 X66.699 Y82.931 E0.00446 ; infill
G1 X66.878 Y83.457 E0.01749 ; infill
G1 X66.951 Y83.606 E0.00523 ; infill
G1 X64.385 Y81.040 E0.11411 ; infill
G1 X64.344 Y81.215 E0.00563 ; infill
G1 X64.321 Y81.510 E0.00933 ; infill
G1 X69.708 Y86.898 E0.23958 ; infill
G1 X70.362 Y87.017 E0.02091 ; infill
G1 X69.027 Y85.682 E0.05937 ; infill
G1 X69.174 Y85.756 E0.00518 ; infill
G1 X69.705 Y85.937 E0.01765 ; infill
G1 X69.844 Y85.965 E0.00446 ; infill
G1 X70.951 Y87.071 E0.04922 ; infill
G1 X71.403 Y86.989 E0.01446 ; infill
G1 X70.475 Y86.060 E0.04130 ; infill
G1 X70.805 Y86.082 E0.01042 ; infill
G1 X71.017 Y86.068 E0.00667 ; infill
G1 X71.856 Y86.906 E0.03729 ; infill
G1 X72.308 Y86.824 E0.01446 ; infill
G1 X71.502 Y86.017 E0.03587 ; infill
G1 X71.943 Y85.924 E0.01419 ; infill
G1 X72.746 Y86.727 E0.03569 ; infill
G1 X73.164 Y86.611 E0.01366 ; infill
G1 X72.342 Y85.789 E0.03655 ; infill
G1 X72.710 Y85.621 E0.01270 ; infill
G1 X73.567 Y86.478 E0.03811 ; infill
G1 X73.948 Y86.324 E0.01292 ; infill
G1 X73.054 Y85.430 E0.03975 ; infill
G1 X73.374 Y85.216 E0.01212 ; infill
G1 X74.315 Y86.157 E0.04183 ; infill
G1 X74.660 Y85.967 E0.01238 ; infill
G1 X73.661 Y84.968 E0.04441 ; infill
G1 X73.930 Y84.702 E0.01189 ; infill
G1 X74.994 Y85.766 E0.04734 ; infill
G1 X75.305 Y85.542 E0.01205 ; infill
G1 X74.179 Y84.417 E0.05004 ; infill
G1 X74.394 Y84.096 E0.01212 ; infill
G1 X75.606 Y85.308 E0.05391 ; infill
G1 X75.881 Y85.049 E0.01190 ; infill
G1 X74.587 Y83.754 E0.05756 ; infill
G1 X74.756 Y83.389 E0.01266 ; infill
G1 X76.145 Y84.778 E0.06177 ; infill
G1 X76.384 Y84.482 E0.01196 ; infill
G1 X74.892 Y82.990 E0.06635 ; infill
G1 X74.988 Y82.551 E0.01413 ; infill
G1 X76.613 Y84.177 E0.07230 ; infill
G1 X76.826 Y83.854 E0.01214 ; infill
G1 X75.039 Y82.068 E0.07945 ; infill
G1 X75.058 Y81.830 E0.00748 ; infill
G1 X75.034 Y81.528 E0.00954 ; infill
G1 X77.069 Y83.563 E0.09051 ; infill
G1 X77.176 Y83.438 E0.00517 ; infill
G1 X77.199 Y83.157 E0.00885 ; infill
G1 X74.947 Y80.906 E0.10013 ; infill
G1 X74.912 Y80.730 E0.00563 ; infill
G1 X74.688 Y80.112 E0.02066 ; infill
G1 X77.396 Y82.820 E0.12043 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X74.688 Y80.112 E-1.01065 ; wipe and retract
G1 X74.912 Y80.730 E-0.17337 ; wipe and retract
G1 X74.947 Y80.906 E-0.04728 ; wipe and retract
G1 X77.199 Y83.157 E-0.84030 ; wipe and retract
G1 X77.176 Y83.438 E-0.07429 ; wipe and retract
G1 X77.069 Y83.563 E-0.04335 ; wipe and retract
G1 X76.826 Y83.320 E-0.09075 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X79.767 Y84.069 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X80.272 Y84.165 E0.00244 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X79.767 Y84.069 E-0.13576 ; wipe and retract
G1 E-2.26424 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X85.891 Y79.267 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X85.247 Y78.640 E0.02826 ; infill
G1 X85.020 Y78.498 E0.00842 ; infill
G1 X84.716 Y78.377 E0.01029 ; infill
G1 X84.422 Y78.333 E0.00934 ; infill
G1 X85.798 Y79.709 E0.06117 ; infill
G1 X85.811 Y79.815 E0.00336 ; infill
G1 X85.800 Y79.990 E0.00550 ; infill
G1 X85.750 Y80.196 E0.00667 ; infill
G1 X83.940 Y78.386 E0.08049 ; infill
G1 X83.780 Y78.440 E0.00530 ; infill
G1 X83.570 Y78.550 E0.00747 ; infill
G1 X85.598 Y80.578 E0.09016 ; infill
G1 X85.558 Y80.679 E0.00339 ; infill
G1 X85.557 Y81.073 E0.01238 ; infill
G1 X83.275 Y78.790 E0.10146 ; infill
G1 X83.176 Y78.903 E0.00471 ; infill
G1 X83.053 Y79.103 E0.00739 ; infill
G1 X85.557 Y81.607 E0.11128 ; infill
G1 X85.556 Y82.141 E0.01678 ; infill
G1 X82.912 Y79.497 E0.11753 ; infill
G1 X82.884 Y79.619 E0.00393 ; infill
G1 X82.873 Y79.798 E0.00565 ; infill
G1 X82.889 Y80.008 E0.00662 ; infill
G1 X85.555 Y82.675 E0.11855 ; infill
G1 X85.555 Y83.208 E0.01678 ; infill
G1 X83.127 Y80.781 E0.10791 ; infill
G1 X83.127 Y81.316 E0.01680 ; infill
G1 X85.535 Y83.724 E0.10705 ; infill
G1 X85.500 Y84.223 E0.01575 ; infill
G1 X83.127 Y81.850 E0.10551 ; infill
G1 X83.127 Y82.385 E0.01680 ; infill
G1 X85.466 Y84.723 E0.10396 ; infill
G1 X85.431 Y85.223 E0.01575 ; infill
G1 X83.127 Y82.919 E0.10242 ; infill
G1 X83.109 Y83.436 E0.01626 ; infill
G1 X85.396 Y85.723 E0.10166 ; infill
G1 X85.361 Y86.223 E0.01575 ; infill
G1 X83.088 Y83.950 E0.10105 ; infill
G1 X83.079 Y84.167 E0.00684 ; infill
G1 X83.144 Y84.540 E0.01189 ; infill
G1 X85.327 Y86.723 E0.09704 ; infill
G1 X85.292 Y87.223 E0.01575 ; infill
G1 X83.242 Y85.173 E0.09111 ; infill
G1 X83.308 Y85.774 E0.01899 ; infill
G1 X85.257 Y87.722 E0.08663 ; infill
G1 X85.222 Y88.222 E0.01575 ; infill
G1 X83.358 Y86.358 E0.08287 ; infill
G1 X83.393 Y86.928 E0.01795 ; infill
G1 X85.213 Y88.748 E0.08089 ; infill
G1 X85.233 Y89.302 E0.01744 ; infill
G1 X83.428 Y87.498 E0.08021 ; infill
G1 X83.464 Y88.068 E0.01795 ; infill
G1 X85.235 Y89.839 E0.07875 ; infill
G1 X85.120 Y90.259 E0.01369 ; infill
G1 X83.499 Y88.637 E0.07209 ; infill
G1 X83.509 Y89.183 E0.01715 ; infill
G1 X85.057 Y90.731 E0.06881 ; infill
G1 X85.046 Y90.813 E0.00262 ; infill
G1 X84.605 Y90.813 E0.01386 ; infill
G1 X83.504 Y89.712 E0.04895 ; infill
G1 X83.499 Y90.242 E0.01665 ; infill
G1 X84.240 Y90.983 E0.03295 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X83.499 Y90.242 E-0.27663 ; wipe and retract
G1 X83.504 Y89.712 E-0.13974 ; wipe and retract
G1 X84.605 Y90.813 E-0.41090 ; wipe and retract
G1 X85.046 Y90.813 E-0.11638 ; wipe and retract
G1 X85.057 Y90.731 E-0.02198 ; wipe and retract
G1 X83.509 Y89.183 E-0.57769 ; wipe and retract
G1 X83.499 Y88.637 E-0.14395 ; wipe and retract
G1 X85.087 Y90.226 E-0.59273 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X80.977 Y90.802 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X80.571 Y90.958 E0.00206 ; infill
G1 X79.408 Y92.460 F10800.000 ; move to first infill point
G1 F1800.000
G1 X79.093 Y92.081 E0.00224 ; infill
G1 X78.770 Y91.732 E0.00634 ; infill
G1 X79.026 Y91.878 F10800.000 ; move to first infill point
G1 F1800.000
G1 X78.735 Y91.789 E0.00398 ; infill
G1 X78.607 Y91.712 E0.00143 ; infill
G1 X78.478 Y91.634 E0.00107 ; infill
G1 X78.346 Y91.566 E0.00071 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X78.478 Y91.634 E-0.03938 ; wipe and retract
G1 E-2.36062 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X75.536 Y93.698 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X75.243 Y93.761 E0.00145 ; infill
G1 X75.041 Y93.812 E0.00305 ; infill
G1 X74.891 Y93.711 E0.00264 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X75.041 Y93.812 E-0.04772 ; wipe and retract
G1 X75.243 Y93.761 E-0.05512 ; wipe and retract
G1 E-2.29717 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.805 Y94.147 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X70.806 Y100.284 E0.02585 ; infill
G1 X71.208 Y100.506 F10800.000 ; move to first infill point
G1 F1800.000
G1 X71.716 Y100.475 E0.00881 ; infill
G1 X73.558 Y100.458 E0.01357 ; infill
G1 X74.729 Y100.418 E0.00863 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X73.558 Y100.458 E-0.30906 ; wipe and retract
G1 X71.716 Y100.475 E-0.48619 ; wipe and retract
G1 E-1.60475 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X75.511 Y98.540 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X75.245 Y98.480 E0.00124 ; infill
G1 X74.938 Y98.405 E0.00448 ; infill
G1 X74.128 Y97.599 F10800.000 ; move to first infill point
G1 F1800.000
G1 X74.095 Y97.471 E0.00239 ; infill
G1 X74.063 Y97.343 E0.00197 ; infill
G1 X74.031 Y97.215 E0.00154 ; infill
G1 X73.999 Y97.087 E0.00111 ; infill
G1 X73.984 Y96.977 E0.00058 ; infill
G1 X73.981 Y95.279 F10800.000 ; move to first infill point
G1 F1800.000
G1 X73.998 Y95.155 E0.00068 ; infill
G1 X74.030 Y95.025 E0.00117 ; infill
G1 X74.063 Y94.894 E0.00161 ; infill
G1 X74.095 Y94.764 E0.00205 ; infill
G1 X74.128 Y94.634 E0.00250 ; infill
G1 X74.201 Y94.146 F10800.000 ; move to first infill point
G1 F1800.000
G1 X73.025 Y94.126 E0.01100 ; infill
G1 X72.497 Y92.908 F10800.000 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X71.014 Y91.426 E0.06691 ; infill
G1 X70.805 Y91.403 E0.00671 ; infill
G1 X70.483 Y91.438 E0.01033 ; infill
G1 X72.664 Y93.618 E0.09842 ; infill
G1 X72.748 Y93.785 E0.00595 ; infill
G1 X72.743 Y94.062 E0.00884 ; infill
G1 X72.564 Y94.061 E0.00573 ; infill
G1 X70.009 Y91.506 E0.11530 ; infill
G1 X69.827 Y91.868 E0.01290 ; infill
G1 X72.018 Y94.058 E0.09888 ; infill
G1 X71.473 Y94.056 E0.01741 ; infill
G1 X69.646 Y92.229 E0.08246 ; infill
G1 X69.464 Y92.590 E0.01290 ; infill
G1 X70.738 Y93.864 E0.05750 ; infill
G1 X70.476 Y93.864 E0.00837 ; infill
G1 X70.476 Y94.054 E0.00607 ; infill
G1 X70.386 Y94.054 E0.00287 ; infill
G1 X69.283 Y92.951 E0.04980 ; infill
G1 X69.101 Y93.312 E0.01290 ; infill
G1 X69.846 Y94.057 E0.03361 ; infill
G1 X69.305 Y94.060 E0.01724 ; infill
G1 X68.793 Y93.547 E0.02313 ; infill
G1 X68.586 Y94.126 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X67.410 Y94.146 E0.01100 ; infill
G1 X67.483 Y94.634 F10800.000 ; move to first infill point
G1 F1800.000
G1 X67.548 Y94.894 E0.00411 ; infill
G1 X67.629 Y95.279 E0.00206 ; infill
G1 X67.627 Y96.977 F10800.000 ; move to first infill point
G1 F1800.000
G1 X67.548 Y97.343 E0.00189 ; infill
G1 X67.483 Y97.599 E0.00394 ; infill
G1 X66.673 Y98.405 F10800.000 ; move to first infill point
G1 F1800.000
G1 X66.366 Y98.480 E0.00453 ; infill
G1 X66.265 Y98.505 E0.00115 ; infill
G1 X66.164 Y98.531 E0.00082 ; infill
G1 X66.100 Y98.540 E0.00031 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X66.164 Y98.531 E-0.01725 ; wipe and retract
G1 E-2.38275 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X66.882 Y100.418 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X67.467 Y100.438 E0.00431 ; infill
G1 X68.053 Y100.458 E0.00641 ; infill
G1 X69.411 Y100.461 E0.01488 ; infill
G1 X69.895 Y100.475 E0.00646 ; infill
G1 X70.403 Y100.506 E0.00881 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X69.895 Y100.475 E-0.13436 ; wipe and retract
G1 E-2.26564 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.805 Y102.695 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X70.805 Y104.450 E0.00831 ; infill
G1 X70.735 Y106.431 F10800.000 ; move to first infill point
G1 F1800.000
G1 X70.805 Y106.517 E0.00183 ; infill
G1 X70.805 Y106.890 E0.00614 ; infill
G1 X70.805 Y106.890 F10800.000 ; move to first infill point
G1 F1800.000
G1 X70.805 Y108.769 E0.02695 ; infill
G1 X70.720 Y108.855 E0.00173 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.805 Y108.769 E-0.03185 ; wipe and retract
G1 X70.805 Y106.890 E-0.49605 ; wipe and retract
G1 E-1.87209 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X68.736 Y111.466 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X66.596 Y109.327 E0.09699 ; infill
G1 X66.051 Y109.327 E0.01748 ; infill
G1 X67.319 Y110.595 E0.05751 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X66.051 Y109.327 E-0.47343 ; wipe and retract
G1 X66.596 Y109.327 E-0.14387 ; wipe and retract
G1 X68.736 Y111.466 E-0.79848 ; wipe and retract
G1 E-0.98423 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X63.253 Y109.358 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X61.608 Y109.838 E0.00811 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X63.253 Y109.358 E-0.45215 ; wipe and retract
G1 E-1.94785 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X58.995 Y109.101 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X58.450 Y108.555 E0.02500 ; infill
G1 X58.261 Y108.418 E0.00754 ; infill
G1 X57.964 Y108.295 E0.01043 ; infill
G1 X57.806 Y108.263 E0.00522 ; infill
G1 X57.599 Y108.256 E0.00668 ; infill
G1 X58.936 Y109.593 E0.06124 ; infill
G1 X59.159 Y110.366 E0.02607 ; infill
G1 X57.151 Y108.358 E0.09200 ; infill
G1 X57.037 Y108.414 E0.00410 ; infill
G1 X56.822 Y108.580 E0.00880 ; infill
G1 X59.178 Y110.936 E0.10792 ; infill
G1 X59.211 Y111.519 E0.01893 ; infill
G1 X56.572 Y108.880 E0.12087 ; infill
G1 X56.459 Y109.152 E0.00951 ; infill
G1 X56.436 Y109.295 E0.00472 ; infill
G1 X59.279 Y112.138 E0.13022 ; infill
G1 X59.363 Y112.774 E0.02076 ; infill
G1 X56.359 Y109.769 E0.13761 ; infill
G1 X56.282 Y110.243 E0.01554 ; infill
G1 X59.456 Y113.417 E0.14540 ; infill
G1 X59.549 Y114.061 E0.02107 ; infill
G1 X56.187 Y110.700 E0.15397 ; infill
G1 X56.071 Y111.134 E0.01456 ; infill
G1 X59.642 Y114.705 E0.16356 ; infill
G1 X59.735 Y115.349 E0.02107 ; infill
G1 X55.965 Y111.579 E0.17266 ; infill
G1 X55.947 Y112.112 E0.01728 ; infill
G1 X59.828 Y115.993 E0.17773 ; infill
G1 X59.921 Y116.636 E0.02107 ; infill
G1 X55.920 Y112.636 E0.18324 ; infill
G1 X55.869 Y113.135 E0.01626 ; infill
G1 X60.014 Y117.280 E0.18985 ; infill
G1 X60.107 Y117.924 E0.02107 ; infill
G1 X55.800 Y113.617 E0.19725 ; infill
G1 X55.732 Y114.100 E0.01578 ; infill
G1 X60.200 Y118.568 E0.20465 ; infill
G1 X60.293 Y119.211 E0.02107 ; infill
G1 X55.663 Y114.582 E0.21204 ; infill
G1 X55.595 Y115.064 E0.01578 ; infill
G1 X60.495 Y119.964 E0.22444 ; infill
G1 X60.420 Y120.441 E0.01562 ; infill
G1 X55.526 Y115.547 E0.22417 ; infill
G1 X55.457 Y116.029 E0.01578 ; infill
G1 X59.203 Y119.774 E0.17154 ; infill
G1 X58.957 Y119.653 E0.00888 ; infill
G1 X58.530 Y119.508 E0.01458 ; infill
G1 X58.349 Y119.472 E0.00598 ; infill
G1 X55.389 Y116.511 E0.13560 ; infill
G1 X55.320 Y116.993 E0.01578 ; infill
G1 X57.722 Y119.395 E0.11002 ; infill
G1 X57.195 Y119.419 E0.01709 ; infill
G1 X55.252 Y117.476 E0.08901 ; infill
G1 X55.183 Y117.958 E0.01578 ; infill
G1 X56.737 Y119.511 E0.07115 ; infill
G1 X56.325 Y119.651 E0.01407 ; infill
G1 X55.115 Y118.440 E0.05545 ; infill
G1 X55.046 Y118.922 E0.01578 ; infill
G1 X55.956 Y119.832 E0.04167 ; infill
G1 X55.622 Y120.049 E0.01290 ; infill
G1 X54.977 Y119.405 E0.02951 ; infill
G1 X54.922 Y119.900 E0.01615 ; infill
G1 X55.319 Y120.298 E0.01819 ; infill
G1 X55.048 Y120.577 E0.01262 ; infill
G1 X54.737 Y120.266 E0.01426 ; infill
G1 X54.597 Y122.100 F10800.000 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X54.565 Y122.417 E0.00787 ; infill
G1 X54.552 Y122.804 E0.00850 ; infill
G1 X54.560 Y123.791 E0.01952 ; infill
G1 X54.606 Y124.134 E0.00658 ; infill
G1 X54.641 Y124.328 E0.00291 ; infill
G1 X54.675 Y124.521 E0.00221 ; infill
G1 X54.709 Y124.714 E0.00152 ; infill
G1 X54.756 Y126.397 F10800.000 ; move to first infill point
G1 F1800.000
G1 X54.756 Y127.982 E0.00750 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X54.756 Y126.397 E-0.41830 ; wipe and retract
G1 E-1.98170 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X53.213 Y132.451 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X53.852 Y133.090 E0.02899 ; infill
G1 X54.466 Y133.159 E0.01982 ; infill
G1 X53.906 Y132.598 E0.02542 ; infill
G1 X54.450 Y132.598 E0.01748 ; infill
G1 X55.015 Y133.163 E0.02563 ; infill
G1 X55.499 Y133.101 E0.01564 ; infill
G1 X54.996 Y132.598 E0.02280 ; infill
G1 X55.543 Y132.599 E0.01753 ; infill
G1 X56.016 Y133.072 E0.02145 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X55.543 Y132.599 E-0.17647 ; wipe and retract
G1 X54.996 Y132.598 E-0.14421 ; wipe and retract
G1 X55.499 Y133.101 E-0.18756 ; wipe and retract
G1 X55.015 Y133.163 E-0.12865 ; wipe and retract
G1 X54.450 Y132.598 E-0.21086 ; wipe and retract
G1 X53.906 Y132.598 E-0.14379 ; wipe and retract
G1 X54.466 Y133.159 E-0.20913 ; wipe and retract
G1 X53.852 Y133.090 E-0.16309 ; wipe and retract
G1 X53.213 Y132.451 E-0.23854 ; wipe and retract
G1 E-0.79770 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X54.756 Y135.926 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Gap fill
G1 F1800.000
G1 X54.756 Y137.759 E0.00935 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X54.756 Y135.926 E-0.48368 ; wipe and retract
G1 E-1.91632 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X70.805 Y137.394 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
G1 F1800.000
G1 X70.805 Y132.365 E0.02380 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X70.805 Y137.394 E-1.32710 ; wipe and retract
G1 E-1.07290 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X37.786 Y139.798 ; move to first infill point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Solid infill
G1 F1800.000
G1 X33.890 Y135.902 E0.17297 ; infill
G1 X33.988 Y136.308 E0.01309 ; infill
G1 X34.148 Y136.694 E0.01311 ; infill
G1 X37.079 Y139.625 E0.13015 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X34.148 Y136.694 E-1.09393 ; wipe and retract
G1 X33.988 Y136.308 E-0.11018 ; wipe and retract
G1 X33.890 Y135.902 E-0.11000 ; wipe and retract
G1 X36.479 Y138.491 E-0.96589 ; wipe and retract
G1 E-0.12000 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X48.146 Y131.877 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X48.090 Y131.773 E0.00370 ; perimeter
G1 X48.071 Y131.624 E0.00471 ; perimeter
G1 X48.087 Y131.500 E0.00391 ; perimeter
G1 X48.158 Y131.358 E0.00499 ; perimeter
G1 X48.254 Y131.257 E0.00436 ; perimeter
G1 X48.367 Y131.192 E0.00410 ; perimeter
G1 X48.527 Y131.168 E0.00507 ; perimeter
G1 X48.687 Y131.192 E0.00507 ; perimeter
G1 X48.801 Y131.257 E0.00410 ; perimeter
G1 X48.909 Y131.371 E0.00492 ; perimeter
G1 X48.964 Y131.475 E0.00370 ; perimeter
G1 X48.984 Y131.624 E0.00471 ; perimeter
G1 X48.968 Y131.747 E0.00391 ; perimeter
G1 X48.897 Y131.890 E0.00499 ; perimeter
G1 X48.801 Y131.991 E0.00436 ; perimeter
G1 X48.687 Y132.056 E0.00410 ; perimeter
G1 X48.527 Y132.079 E0.00507 ; perimeter
G1 X48.390 Y132.059 E0.00436 ; perimeter
G1 X48.242 Y131.979 E0.00527 ; perimeter
G1 X48.187 Y131.921 E0.00252 ; perimeter
G1 X47.760 Y131.963 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X47.723 Y131.869 E0.00320 ; perimeter
G1 X47.690 Y131.624 E0.00774 ; perimeter
G1 X47.721 Y131.388 E0.00746 ; perimeter
G1 X47.846 Y131.139 E0.00873 ; perimeter
G1 X48.014 Y130.962 E0.00766 ; perimeter
G1 X48.261 Y130.826 E0.00882 ; perimeter
G1 X48.527 Y130.787 E0.00846 ; perimeter
G1 X48.794 Y130.826 E0.00846 ; perimeter
G1 X49.041 Y130.962 E0.00882 ; perimeter
G1 X49.213 Y131.144 E0.00786 ; perimeter
G1 X49.295 Y131.284 E0.00509 ; perimeter
G1 X49.332 Y131.379 E0.00320 ; perimeter
G1 X49.365 Y131.624 E0.00774 ; perimeter
G1 X49.333 Y131.860 E0.00746 ; perimeter
G1 X49.209 Y132.109 E0.00873 ; perimeter
G1 X49.041 Y132.286 E0.00766 ; perimeter
G1 X48.895 Y132.376 E0.00536 ; perimeter
G1 X48.794 Y132.421 E0.00348 ; perimeter
G1 X48.527 Y132.461 E0.00846 ; perimeter
G1 X48.269 Y132.422 E0.00820 ; perimeter
G1 X48.010 Y132.282 E0.00924 ; perimeter
G1 X47.841 Y132.104 E0.00767 ; perimeter
G1 X47.790 Y132.015 E0.00321 ; perimeter
G1 X47.816 Y131.878 F10800.000 ; move inwards before travel
G1 X48.840 Y131.750 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X48.399 Y131.309 E0.02347 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.840 Y131.750 E-0.16462 ; wipe and retract
G1 E-2.23538 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X41.719 Y129.804 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X41.639 Y129.951 E0.00527 ; perimeter
G1 X41.536 Y130.049 E0.00445 ; perimeter
G1 X41.460 Y130.093 E0.00275 ; perimeter
G1 X41.283 Y130.124 E0.00564 ; perimeter
G1 X41.159 Y130.107 E0.00392 ; perimeter
G1 X41.017 Y130.036 E0.00498 ; perimeter
G1 X40.915 Y129.940 E0.00440 ; perimeter
G1 X40.865 Y129.859 E0.00297 ; perimeter
G1 X40.827 Y129.666 E0.00618 ; perimeter
G1 X40.847 Y129.528 E0.00436 ; perimeter
G1 X40.927 Y129.381 E0.00526 ; perimeter
G1 X41.030 Y129.283 E0.00445 ; perimeter
G1 X41.106 Y129.239 E0.00275 ; perimeter
G1 X41.283 Y129.208 E0.00564 ; perimeter
G1 X41.393 Y129.223 E0.00349 ; perimeter
G1 X41.536 Y129.283 E0.00486 ; perimeter
G1 X41.651 Y129.392 E0.00497 ; perimeter
G1 X41.716 Y129.506 E0.00410 ; perimeter
G1 X41.740 Y129.666 E0.00507 ; perimeter
G1 X41.728 Y129.744 E0.00248 ; perimeter
G1 X42.101 Y129.800 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X42.082 Y129.925 E0.00397 ; perimeter
G1 X41.942 Y130.184 E0.00923 ; perimeter
G1 X41.763 Y130.353 E0.00773 ; perimeter
G1 X41.528 Y130.472 E0.00826 ; perimeter
G1 X41.283 Y130.504 E0.00774 ; perimeter
G1 X41.047 Y130.473 E0.00746 ; perimeter
G1 X40.798 Y130.349 E0.00872 ; perimeter
G1 X40.620 Y130.180 E0.00771 ; perimeter
G1 X40.485 Y129.933 E0.00881 ; perimeter
G1 X40.446 Y129.666 E0.00846 ; perimeter
G1 X40.484 Y129.407 E0.00820 ; perimeter
G1 X40.624 Y129.148 E0.00923 ; perimeter
G1 X40.803 Y128.979 E0.00773 ; perimeter
G1 X40.942 Y128.899 E0.00502 ; perimeter
G1 X41.038 Y128.861 E0.00327 ; perimeter
G1 X41.283 Y128.828 E0.00774 ; perimeter
G1 X41.476 Y128.854 E0.00609 ; perimeter
G1 X41.631 Y128.903 E0.00512 ; perimeter
G1 X41.763 Y128.979 E0.00478 ; perimeter
G1 X41.946 Y129.153 E0.00792 ; perimeter
G1 X42.081 Y129.399 E0.00881 ; perimeter
G1 X42.121 Y129.666 E0.00846 ; perimeter
G1 X42.110 Y129.740 E0.00235 ; perimeter
G1 X41.986 Y129.854 F10800.000 ; move inwards before travel
G1 X41.152 Y129.346 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X41.597 Y129.792 E0.02371 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X41.152 Y129.346 E-0.16626 ; wipe and retract
G1 E-2.23374 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X48.740 Y126.405 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X48.693 Y126.245 E0.00521 ; perimeter
G1 X48.707 Y126.150 E0.00301 ; perimeter
G1 X48.728 Y126.104 E0.00159 ; perimeter
G1 X48.834 Y125.997 E0.00472 ; perimeter
G1 X48.978 Y125.959 E0.00468 ; perimeter
G1 X49.065 Y125.971 E0.00275 ; perimeter
G1 X49.216 Y126.086 E0.00597 ; perimeter
G1 X49.263 Y126.245 E0.00521 ; perimeter
G1 X49.250 Y126.334 E0.00280 ; perimeter
G1 X49.216 Y126.405 E0.00246 ; perimeter
G1 X49.106 Y126.504 E0.00464 ; perimeter
G1 X48.978 Y126.532 E0.00411 ; perimeter
G1 X48.891 Y126.520 E0.00275 ; perimeter
G1 X48.784 Y126.445 E0.00409 ; perimeter
G1 X48.648 Y126.829 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X48.431 Y126.635 E0.00913 ; perimeter
G1 X48.341 Y126.445 E0.00660 ; perimeter
G1 X48.312 Y126.245 E0.00632 ; perimeter
G1 X48.341 Y126.044 E0.00639 ; perimeter
G1 X48.412 Y125.887 E0.00537 ; perimeter
G1 X48.618 Y125.679 E0.00920 ; perimeter
G1 X48.798 Y125.603 E0.00613 ; perimeter
G1 X48.978 Y125.579 E0.00570 ; perimeter
G1 X49.160 Y125.603 E0.00577 ; perimeter
G1 X49.308 Y125.661 E0.00497 ; perimeter
G1 X49.524 Y125.856 E0.00913 ; perimeter
G1 X49.615 Y126.046 E0.00660 ; perimeter
G1 X49.644 Y126.245 E0.00632 ; perimeter
G1 X49.615 Y126.445 E0.00632 ; perimeter
G1 X49.524 Y126.635 E0.00660 ; perimeter
G1 X49.308 Y126.829 E0.00913 ; perimeter
G1 X49.160 Y126.888 E0.00497 ; perimeter
G1 X48.978 Y126.912 E0.00577 ; perimeter
G1 X48.795 Y126.888 E0.00578 ; perimeter
G1 X48.704 Y126.851 E0.00308 ; perimeter
G1 X48.661 Y126.538 F10800.000 ; move inwards before travel
G1 X48.991 Y126.245 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X48.963 Y126.246 E0.00041 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X48.991 Y126.245 E-0.00723 ; wipe and retract
G1 E-2.39277 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X60.274 Y131.466 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X60.329 Y131.370 E0.00345 ; perimeter
G1 X60.417 Y131.278 E0.00400 ; perimeter
G1 X60.565 Y131.196 E0.00531 ; perimeter
G1 X60.700 Y131.176 E0.00428 ; perimeter
G1 X60.861 Y131.200 E0.00508 ; perimeter
G1 X60.974 Y131.269 E0.00417 ; perimeter
G1 X61.059 Y131.359 E0.00386 ; perimeter
G1 X61.133 Y131.503 E0.00507 ; perimeter
G1 X61.149 Y131.624 E0.00384 ; perimeter
G1 X61.129 Y131.774 E0.00474 ; perimeter
G1 X61.069 Y131.879 E0.00379 ; perimeter
G1 X60.984 Y131.969 E0.00389 ; perimeter
G1 X60.835 Y132.052 E0.00534 ; perimeter
G1 X60.700 Y132.072 E0.00427 ; perimeter
G1 X60.565 Y132.052 E0.00428 ; perimeter
G1 X60.417 Y131.970 E0.00531 ; perimeter
G1 X60.329 Y131.878 E0.00400 ; perimeter
G1 X60.274 Y131.782 E0.00345 ; perimeter
G1 X60.251 Y131.624 E0.00502 ; perimeter
G1 X60.264 Y131.525 E0.00314 ; perimeter
G1 X59.934 Y131.301 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X60.025 Y131.143 E0.00572 ; perimeter
G1 X60.184 Y130.976 E0.00723 ; perimeter
G1 X60.443 Y130.833 E0.00928 ; perimeter
G1 X60.701 Y130.795 E0.00817 ; perimeter
G1 X60.968 Y130.835 E0.00846 ; perimeter
G1 X61.214 Y130.974 E0.00889 ; perimeter
G1 X61.370 Y131.139 E0.00709 ; perimeter
G1 X61.498 Y131.389 E0.00881 ; perimeter
G1 X61.529 Y131.624 E0.00744 ; perimeter
G1 X61.497 Y131.869 E0.00776 ; perimeter
G1 X61.374 Y132.106 E0.00835 ; perimeter
G1 X61.218 Y132.270 E0.00710 ; perimeter
G1 X60.959 Y132.414 E0.00930 ; perimeter
G1 X60.701 Y132.453 E0.00817 ; perimeter
G1 X60.443 Y132.415 E0.00817 ; perimeter
G1 X60.184 Y132.272 E0.00928 ; perimeter
G1 X60.025 Y132.105 E0.00723 ; perimeter
G1 X59.934 Y131.947 E0.00572 ; perimeter
G1 X59.903 Y131.869 E0.00263 ; perimeter
G1 X59.870 Y131.624 E0.00775 ; perimeter
G1 X59.912 Y131.357 E0.00848 ; perimeter
G1 X60.114 Y131.273 F10800.000 ; move inwards before travel
G1 X61.008 Y131.757 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X60.573 Y131.321 E0.02318 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X61.008 Y131.757 E-0.16259 ; wipe and retract
G1 E-2.23741 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X99.871 Y129.666 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X99.895 Y129.506 E0.00507 ; perimeter
G1 X99.960 Y129.392 E0.00410 ; perimeter
G1 X100.061 Y129.296 E0.00440 ; perimeter
G1 X100.204 Y129.225 E0.00498 ; perimeter
G1 X100.328 Y129.208 E0.00392 ; perimeter
G1 X100.505 Y129.239 E0.00564 ; perimeter
G1 X100.581 Y129.283 E0.00275 ; perimeter
G1 X100.684 Y129.381 E0.00445 ; perimeter
G1 X100.764 Y129.528 E0.00527 ; perimeter
G1 X100.784 Y129.666 E0.00436 ; perimeter
G1 X100.764 Y129.804 E0.00436 ; perimeter
G1 X100.684 Y129.951 E0.00526 ; perimeter
G1 X100.581 Y130.049 E0.00445 ; perimeter
G1 X100.505 Y130.093 E0.00275 ; perimeter
G1 X100.328 Y130.124 E0.00564 ; perimeter
G1 X100.179 Y130.104 E0.00471 ; perimeter
G1 X100.075 Y130.049 E0.00369 ; perimeter
G1 X99.972 Y129.951 E0.00445 ; perimeter
G1 X99.892 Y129.804 E0.00526 ; perimeter
G1 X99.880 Y129.725 E0.00248 ; perimeter
G1 X99.507 Y129.781 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X99.490 Y129.666 E0.00363 ; perimeter
G1 X99.530 Y129.399 E0.00846 ; perimeter
G1 X99.665 Y129.153 E0.00881 ; perimeter
G1 X99.843 Y128.983 E0.00771 ; perimeter
G1 X100.092 Y128.859 E0.00872 ; perimeter
G1 X100.328 Y128.828 E0.00746 ; perimeter
G1 X100.572 Y128.861 E0.00774 ; perimeter
G1 X100.669 Y128.899 E0.00327 ; perimeter
G1 X100.808 Y128.979 E0.00502 ; perimeter
G1 X100.987 Y129.148 E0.00773 ; perimeter
G1 X101.127 Y129.407 E0.00923 ; perimeter
G1 X101.165 Y129.666 E0.00820 ; perimeter
G1 X101.127 Y129.925 E0.00820 ; perimeter
G1 X100.987 Y130.184 E0.00923 ; perimeter
G1 X100.808 Y130.353 E0.00773 ; perimeter
G1 X100.572 Y130.472 E0.00826 ; perimeter
G1 X100.328 Y130.504 E0.00774 ; perimeter
G1 X100.083 Y130.472 E0.00774 ; perimeter
G1 X99.848 Y130.353 E0.00826 ; perimeter
G1 X99.669 Y130.184 E0.00773 ; perimeter
G1 X99.528 Y129.925 E0.00923 ; perimeter
G1 X99.516 Y129.840 E0.00269 ; perimeter
G1 X99.592 Y129.702 F10800.000 ; move inwards before travel
G1 X100.641 Y129.792 ; move to first infill point
;TYPE:Solid infill
G1 F1800.000
G1 X100.202 Y129.352 E0.02341 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X100.641 Y129.792 E-0.16417 ; wipe and retract
G1 E-2.23583 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X92.905 Y126.334 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X92.871 Y126.405 E0.00246 ; perimeter
G1 X92.761 Y126.504 E0.00464 ; perimeter
G1 X92.633 Y126.532 E0.00411 ; perimeter
G1 X92.553 Y126.521 E0.00252 ; perimeter
G1 X92.489 Y126.494 E0.00220 ; perimeter
G1 X92.383 Y126.387 E0.00472 ; perimeter
G1 X92.348 Y126.245 E0.00456 ; perimeter
G1 X92.361 Y126.157 E0.00281 ; perimeter
G1 X92.399 Y126.078 E0.00273 ; perimeter
G1 X92.480 Y126.001 E0.00353 ; perimeter
G1 X92.553 Y125.970 E0.00250 ; perimeter
G1 X92.713 Y125.970 E0.00500 ; perimeter
G1 X92.786 Y126.001 E0.00250 ; perimeter
G1 X92.868 Y126.078 E0.00353 ; perimeter
G1 X92.905 Y126.157 E0.00273 ; perimeter
G1 X92.914 Y126.274 E0.00370 ; perimeter
G1 X92.453 Y126.888 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X92.273 Y126.812 E0.00613 ; perimeter
G1 X92.067 Y126.603 E0.00919 ; perimeter
G1 X91.997 Y126.447 E0.00537 ; perimeter
G1 X91.967 Y126.245 E0.00639 ; perimeter
G1 X91.996 Y126.046 E0.00632 ; perimeter
G1 X92.088 Y125.853 E0.00669 ; perimeter
G1 X92.270 Y125.680 E0.00787 ; perimeter
G1 X92.453 Y125.603 E0.00624 ; perimeter
G1 X92.633 Y125.579 E0.00570 ; perimeter
G1 X92.813 Y125.603 E0.00569 ; perimeter
G1 X92.996 Y125.680 E0.00624 ; perimeter
G1 X93.178 Y125.853 E0.00787 ; perimeter
G1 X93.270 Y126.046 E0.00670 ; perimeter
G1 X93.299 Y126.245 E0.00632 ; perimeter
G1 X93.270 Y126.445 E0.00632 ; perimeter
G1 X93.180 Y126.635 E0.00660 ; perimeter
G1 X92.963 Y126.829 E0.00913 ; perimeter
G1 X92.816 Y126.888 E0.00497 ; perimeter
G1 X92.633 Y126.912 E0.00577 ; perimeter
G1 X92.513 Y126.896 E0.00381 ; perimeter
G1 X92.404 Y126.699 F10800.000 ; move inwards before travel
G1 X92.637 Y126.242 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X92.628 Y126.241 E0.00013 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X92.637 Y126.242 E-0.00233 ; wipe and retract
G1 E-2.39767 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X55.615 Y103.666 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X55.567 Y103.730 E0.00253 ; perimeter
G1 X55.433 Y103.808 E0.00485 ; perimeter
G1 X55.352 Y103.817 E0.00255 ; perimeter
G1 X55.250 Y103.792 E0.00329 ; perimeter
G1 X55.177 Y103.743 E0.00277 ; perimeter
G1 X55.123 Y103.675 E0.00272 ; perimeter
G1 X55.092 Y103.594 E0.00272 ; perimeter
G1 X55.086 Y103.518 E0.00240 ; perimeter
G1 X55.136 Y103.370 E0.00489 ; perimeter
G1 X55.225 Y103.292 E0.00369 ; perimeter
G1 X55.306 Y103.259 E0.00276 ; perimeter
G1 X55.480 Y103.278 E0.00548 ; perimeter
G1 X55.553 Y103.327 E0.00276 ; perimeter
G1 X55.607 Y103.396 E0.00273 ; perimeter
G1 X55.639 Y103.477 E0.00273 ; perimeter
G1 X55.632 Y103.608 E0.00413 ; perimeter
G1 X55.994 Y103.715 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X55.958 Y103.837 E0.00397 ; perimeter
G1 X55.838 Y103.997 E0.00628 ; perimeter
G1 X55.695 Y104.108 E0.00568 ; perimeter
G1 X55.527 Y104.177 E0.00567 ; perimeter
G1 X55.328 Y104.199 E0.00629 ; perimeter
G1 X55.095 Y104.143 E0.00751 ; perimeter
G1 X54.918 Y104.022 E0.00673 ; perimeter
G1 X54.793 Y103.865 E0.00629 ; perimeter
G1 X54.719 Y103.678 E0.00629 ; perimeter
G1 X54.705 Y103.468 E0.00660 ; perimeter
G1 X54.800 Y103.187 E0.00932 ; perimeter
G1 X54.888 Y103.076 E0.00445 ; perimeter
G1 X55.035 Y102.963 E0.00579 ; perimeter
G1 X55.205 Y102.893 E0.00579 ; perimeter
G1 X55.350 Y102.871 E0.00459 ; perimeter
G1 X55.635 Y102.927 E0.00910 ; perimeter
G1 X55.812 Y103.048 E0.00673 ; perimeter
G1 X55.937 Y103.205 E0.00629 ; perimeter
G1 X56.011 Y103.392 E0.00629 ; perimeter
G1 X56.026 Y103.606 E0.00673 ; perimeter
G1 X56.011 Y103.658 E0.00171 ; perimeter
G1 X55.873 Y103.754 F10800.000 ; move inwards before travel
G1 X55.362 Y103.542 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X55.368 Y103.533 E0.00016 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X55.362 Y103.542 E-0.00305 ; wipe and retract
G1 E-2.39695 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X45.466 Y99.302 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X45.432 Y99.374 E0.00249 ; perimeter
G1 X45.325 Y99.471 E0.00453 ; perimeter
G1 X45.192 Y99.501 E0.00429 ; perimeter
G1 X45.111 Y99.491 E0.00256 ; perimeter
G1 X45.045 Y99.463 E0.00223 ; perimeter
G1 X44.941 Y99.359 E0.00460 ; perimeter
G1 X44.904 Y99.212 E0.00476 ; perimeter
G1 X44.917 Y99.123 E0.00284 ; perimeter
G1 X44.954 Y99.044 E0.00271 ; perimeter
G1 X45.038 Y98.965 E0.00363 ; perimeter
G1 X45.192 Y98.923 E0.00499 ; perimeter
G1 X45.273 Y98.934 E0.00256 ; perimeter
G1 X45.345 Y98.965 E0.00247 ; perimeter
G1 X45.429 Y99.044 E0.00363 ; perimeter
G1 X45.466 Y99.123 E0.00271 ; perimeter
G1 X45.475 Y99.243 E0.00377 ; perimeter
G1 X45.011 Y99.858 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X44.831 Y99.782 E0.00613 ; perimeter
G1 X44.626 Y99.577 E0.00910 ; perimeter
G1 X44.553 Y99.414 E0.00561 ; perimeter
G1 X44.523 Y99.212 E0.00639 ; perimeter
G1 X44.552 Y99.013 E0.00633 ; perimeter
G1 X44.643 Y98.820 E0.00668 ; perimeter
G1 X44.829 Y98.644 E0.00803 ; perimeter
G1 X45.011 Y98.567 E0.00621 ; perimeter
G1 X45.192 Y98.543 E0.00571 ; perimeter
G1 X45.372 Y98.567 E0.00570 ; perimeter
G1 X45.555 Y98.644 E0.00621 ; perimeter
G1 X45.741 Y98.820 E0.00803 ; perimeter
G1 X45.831 Y99.013 E0.00668 ; perimeter
G1 X45.861 Y99.212 E0.00633 ; perimeter
G1 X45.831 Y99.412 E0.00633 ; perimeter
G1 X45.742 Y99.603 E0.00660 ; perimeter
G1 X45.528 Y99.797 E0.00905 ; perimeter
G1 X45.374 Y99.857 E0.00519 ; perimeter
G1 X45.192 Y99.882 E0.00577 ; perimeter
G1 X45.071 Y99.866 E0.00382 ; perimeter
G1 X44.961 Y99.669 F10800.000 ; move inwards before travel
G1 X45.188 Y99.209 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X45.192 Y99.209 E0.00005 ; infill
G1 X45.192 Y99.209 F10800.000 ; move to first infill point
G1 F1800.000
G1 X45.194 Y99.210 E0.00004 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X45.192 Y99.209 E-0.00067 ; wipe and retract
G1 E-2.39933 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X56.997 Y94.311 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X56.983 Y94.216 E0.00301 ; perimeter
G1 X56.997 Y94.128 E0.00281 ; perimeter
G1 X57.034 Y94.049 E0.00273 ; perimeter
G1 X57.115 Y93.972 E0.00352 ; perimeter
G1 X57.189 Y93.940 E0.00250 ; perimeter
G1 X57.348 Y93.940 E0.00500 ; perimeter
G1 X57.422 Y93.972 E0.00250 ; perimeter
G1 X57.503 Y94.049 E0.00353 ; perimeter
G1 X57.540 Y94.128 E0.00273 ; perimeter
G1 X57.553 Y94.216 E0.00280 ; perimeter
G1 X57.540 Y94.305 E0.00280 ; perimeter
G1 X57.507 Y94.376 E0.00246 ; perimeter
G1 X57.397 Y94.474 E0.00464 ; perimeter
G1 X57.268 Y94.502 E0.00411 ; perimeter
G1 X57.189 Y94.492 E0.00252 ; perimeter
G1 X57.124 Y94.464 E0.00220 ; perimeter
G1 X57.025 Y94.364 E0.00443 ; perimeter
G1 X56.702 Y94.574 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X56.632 Y94.418 E0.00537 ; perimeter
G1 X56.602 Y94.216 E0.00639 ; perimeter
G1 X56.632 Y94.017 E0.00632 ; perimeter
G1 X56.723 Y93.824 E0.00670 ; perimeter
G1 X56.905 Y93.651 E0.00787 ; perimeter
G1 X57.088 Y93.573 E0.00624 ; perimeter
G1 X57.268 Y93.549 E0.00570 ; perimeter
G1 X57.449 Y93.573 E0.00569 ; perimeter
G1 X57.632 Y93.651 E0.00624 ; perimeter
G1 X57.814 Y93.824 E0.00787 ; perimeter
G1 X57.905 Y94.017 E0.00670 ; perimeter
G1 X57.935 Y94.216 E0.00632 ; perimeter
G1 X57.905 Y94.415 E0.00632 ; perimeter
G1 X57.815 Y94.606 E0.00660 ; perimeter
G1 X57.598 Y94.800 E0.00913 ; perimeter
G1 X57.451 Y94.858 E0.00496 ; perimeter
G1 X57.268 Y94.883 E0.00577 ; perimeter
G1 X57.088 Y94.859 E0.00570 ; perimeter
G1 X56.908 Y94.782 E0.00613 ; perimeter
G1 X56.744 Y94.617 E0.00731 ; perimeter
G1 X56.777 Y94.420 F10800.000 ; move inwards before travel
G1 X57.272 Y94.213 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X57.263 Y94.212 E0.00013 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X57.272 Y94.213 E-0.00234 ; wipe and retract
G1 E-2.39766 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X85.972 Y103.477 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X86.004 Y103.396 E0.00273 ; perimeter
G1 X86.058 Y103.327 E0.00273 ; perimeter
G1 X86.129 Y103.280 E0.00268 ; perimeter
G1 X86.241 Y103.254 E0.00362 ; perimeter
G1 X86.312 Y103.262 E0.00225 ; perimeter
G1 X86.448 Y103.340 E0.00489 ; perimeter
G1 X86.496 Y103.406 E0.00256 ; perimeter
G1 X86.526 Y103.506 E0.00327 ; perimeter
G1 X86.519 Y103.594 E0.00277 ; perimeter
G1 X86.488 Y103.675 E0.00272 ; perimeter
G1 X86.434 Y103.743 E0.00272 ; perimeter
G1 X86.361 Y103.792 E0.00277 ; perimeter
G1 X86.259 Y103.817 E0.00329 ; perimeter
G1 X86.178 Y103.808 E0.00255 ; perimeter
G1 X86.044 Y103.730 E0.00485 ; perimeter
G1 X85.996 Y103.666 E0.00253 ; perimeter
G1 X85.968 Y103.536 E0.00414 ; perimeter
G1 X85.592 Y103.509 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X85.600 Y103.392 E0.00369 ; perimeter
G1 X85.674 Y103.205 E0.00629 ; perimeter
G1 X85.799 Y103.048 E0.00629 ; perimeter
G1 X85.976 Y102.928 E0.00670 ; perimeter
G1 X86.221 Y102.871 E0.00788 ; perimeter
G1 X86.409 Y102.894 E0.00593 ; perimeter
G1 X86.576 Y102.963 E0.00569 ; perimeter
G1 X86.720 Y103.073 E0.00567 ; perimeter
G1 X86.839 Y103.235 E0.00629 ; perimeter
G1 X86.907 Y103.464 E0.00748 ; perimeter
G1 X86.892 Y103.678 E0.00674 ; perimeter
G1 X86.818 Y103.865 E0.00629 ; perimeter
G1 X86.693 Y104.022 E0.00629 ; perimeter
G1 X86.516 Y104.143 E0.00673 ; perimeter
G1 X86.283 Y104.199 E0.00751 ; perimeter
G1 X86.083 Y104.177 E0.00629 ; perimeter
G1 X85.916 Y104.108 E0.00568 ; perimeter
G1 X85.773 Y103.997 E0.00568 ; perimeter
G1 X85.653 Y103.837 E0.00628 ; perimeter
G1 X85.587 Y103.569 E0.00865 ; perimeter
G1 X85.689 Y103.443 F10800.000 ; move inwards before travel
G1 X86.250 Y103.530 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X86.244 Y103.539 E0.00015 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X86.250 Y103.530 E-0.00271 ; wipe and retract
G1 E-2.39729 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X96.145 Y99.302 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X96.132 Y99.212 E0.00284 ; perimeter
G1 X96.169 Y99.065 E0.00476 ; perimeter
G1 X96.273 Y98.962 E0.00460 ; perimeter
G1 X96.338 Y98.934 E0.00223 ; perimeter
G1 X96.419 Y98.923 E0.00256 ; perimeter
G1 X96.553 Y98.953 E0.00429 ; perimeter
G1 X96.660 Y99.051 E0.00453 ; perimeter
G1 X96.694 Y99.123 E0.00249 ; perimeter
G1 X96.707 Y99.212 E0.00284 ; perimeter
G1 X96.694 Y99.302 E0.00284 ; perimeter
G1 X96.660 Y99.374 E0.00249 ; perimeter
G1 X96.553 Y99.471 E0.00453 ; perimeter
G1 X96.419 Y99.501 E0.00429 ; perimeter
G1 X96.333 Y99.490 E0.00274 ; perimeter
G1 X96.286 Y99.471 E0.00158 ; perimeter
G1 X96.170 Y99.356 E0.00511 ; perimeter
G1 X95.829 Y99.517 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X95.780 Y99.412 E0.00362 ; perimeter
G1 X95.750 Y99.212 E0.00633 ; perimeter
G1 X95.780 Y99.011 E0.00639 ; perimeter
G1 X95.853 Y98.848 E0.00561 ; perimeter
G1 X96.059 Y98.642 E0.00910 ; perimeter
G1 X96.239 Y98.567 E0.00613 ; perimeter
G1 X96.419 Y98.543 E0.00570 ; perimeter
G1 X96.602 Y98.567 E0.00577 ; perimeter
G1 X96.756 Y98.628 E0.00519 ; perimeter
G1 X96.969 Y98.822 E0.00905 ; perimeter
G1 X97.059 Y99.013 E0.00660 ; perimeter
G1 X97.088 Y99.212 E0.00633 ; perimeter
G1 X97.059 Y99.412 E0.00633 ; perimeter
G1 X96.969 Y99.603 E0.00660 ; perimeter
G1 X96.756 Y99.797 E0.00905 ; perimeter
G1 X96.602 Y99.857 E0.00519 ; perimeter
G1 X96.419 Y99.882 E0.00577 ; perimeter
G1 X96.237 Y99.857 E0.00577 ; perimeter
G1 X96.083 Y99.797 E0.00519 ; perimeter
G1 X95.854 Y99.571 E0.01007 ; perimeter
G1 X95.881 Y99.413 F10800.000 ; move inwards before travel
G1 X96.429 Y99.212 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X96.408 Y99.213 E0.00033 ; infill
G1 E-3.60000 F2400.00000 ; retract
G1 F8640.000
G1 X96.429 Y99.212 E-0.00564 ; wipe and retract
G1 E-2.39436 F2400.00000 ; retract
G1 Z0.275 F10800.000 ; lift Z
G1 X84.614 Y94.305 ; move to first perimeter point
G1 Z0.200 ; restore layer Z
G1 E6.00000 F3000.00000 ; unretract
;TYPE:Perimeter
G1 F1800.000
G1 X84.581 Y94.376 E0.00246 ; perimeter
G1 X84.471 Y94.474 E0.00464 ; perimeter
G1 X84.343 Y94.502 E0.00411 ; perimeter
G1 X84.256 Y94.491 E0.00275 ; perimeter
G1 X84.104 Y94.376 E0.00597 ; perimeter
G1 X84.057 Y94.216 E0.00521 ; perimeter
G1 X84.072 Y94.121 E0.00301 ; perimeter
G1 X84.092 Y94.075 E0.00159 ; perimeter
G1 X84.198 Y93.968 E0.00472 ; perimeter
G1 X84.343 Y93.930 E0.00468 ; perimeter
G1 X84.429 Y93.941 E0.00275 ; perimeter
G1 X84.581 Y94.057 E0.00597 ; perimeter
G1 X84.614 Y94.128 E0.00246 ; perimeter
G1 X84.623 Y94.245 E0.00370 ; perimeter
G1 X84.525 Y94.858 F10800.000 ; move to first perimeter point
;TYPE:External perimeter
G1 F1800.000
G1 X84.343 Y94.883 E0.00577 ; perimeter
G1 X84.160 Y94.858 E0.00578 ; perimeter
G1 X84.013 Y94.800 E0.00496 ; perimeter
G1 X83.796 Y94.606 E0.00913 ; perimeter
G1 X83.706 Y94.415 E0.00660 ; perimeter
G1 X83.676 Y94.216 E0.00632 ; perimeter
G1 X83.706 Y94.014 E0.00639 ; perimeter
G1 X83.776 Y93.858 E0.00537 ; perimeter
G1 X83.982 Y93.650 E0.00919 ; perimeter
G1 X84.162 Y93.573 E0.00613 ; perimeter
G1 X84.343 Y93.549 E0.00570 ; perimeter
G1 X84.525 Y93.574 E0.00577 ; perimeter
G1 X84.672 Y93.632 E0.00496 ; perimeter
G1 X84.889 Y93.827 E0.00913 ; perimeter
G1 X84.979 Y94.017 E0.00660 ; perimeter
G1 X85.009 Y94.216 E0.00632 ; perimeter
G1 X84.979 Y94.415 E0.00632 ; perimeter
G1 X84.889 Y94.606 E0.00660 ; perimeter
G1 X84.672 Y94.800 E0.00913 ; perimeter
G1 X84.581 Y94.836 E0.00308 ; perimeter
G1 X84.391 Y94.732 F10800.000 ; move inwards before travel
G1 X84.328 Y94.217 ; move to first infill point
;TYPE:Gap fill
G1 F1800.000
G1 X84.355 Y94.216 E0.00041 ; infill
M106 S255 ; enable fan