luxe-smart-speaker.yaml

esphome:
  name: smart-speaker
  friendly_name: Smart Speaker
  name_add_mac_suffix: false
  min_version: 2023.4.4

esp32:
  board: esp-wrover-kit
  framework:
    version: 2.0.5
    source: ~3.20005.0
    platform_version: platformio/espressif32 @ 5.3.0
    type: arduino
  variant: ESP32

external_components:
  - source: github://pr#3552
    components: [es8388]
    refresh: 0s
  - source: github://pr#4775
    components: [adc, i2s_audio, microphone]
    refresh: 0s

i2c:
  sda: GPIO18
  scl: GPIO23

es8388:

logger:
  baud_rate: 115200
  tx_buffer_size: 512
  deassert_rts_dtr: false
  hardware_uart: UART0
  level: DEBUG
  logs: {}

api:
  port: 6053
  password: ''
  reboot_timeout: 15min

ota:
  safe_mode: true
  port: 3232
  reboot_timeout: 5min
  num_attempts: 10

wifi:
  ap:
    password: ${wifi_ap_password}
    ap_timeout: 1min
  domain: .z13.org
  reboot_timeout: 15min
  power_save_mode: LIGHT
  fast_connect: false
  networks:
  - ssid: TSI
    password: tsiwlan2oo7
    priority: 0.0

captive_portal: {}
improv_serial: {}

i2s_audio:
- i2s_lrclk_pin: 25
  i2s_bclk_pin: 5

microphone:
- platform: i2s_audio
  id: echo_microphone
  i2s_din_pin: 35
  adc_type: external
  pdm: false

media_player:
- platform: i2s_audio
  name: ''
  id: echo_audio
  i2s_dout_pin: 26
  mode: mono
  disabled_by_default: false
  dac_type: external

voice_assistant:
  microphone: echo_microphone
  on_start:
    then:
    - light.turn_on:
        id: led
        blue: 1.0
        red: 0.0
        green: 0.0
        state: true
  on_tts_start:
    then:
    - light.turn_on:
        id: led
        blue: 0.0
        red: 0.0
        green: 1.0
        state: true
  on_tts_end:
    then:
    - light.turn_on:
        id: led
        blue: 0.0
        red: 0.0
        green: 1.0
        state: true
    - media_player.play_media:
        media_url: !lambda |-
          return x;
  on_end:
    then:
    - delay: 1s
    - if:
        condition:
          media_player.is_playing: {}
        then:
        - wait_until:
            condition:
              media_player.is_idle: {}
        - light.turn_off:
            id: led
            state: false
        else:
        - light.turn_off:
            id: led
            state: false
  on_error:
    then:
    - light.turn_on:
        id: led
        blue: 0.0
        red: 1.0
        green: 0.0
        state: true
    - delay: 1s
    - light.turn_off:
        id: led
        state: false
        
binary_sensor:
- platform: gpio
  pin:
    number: GPIO12
    inverted: true
    mode:
      input: true
      output: false
      open_drain: false
      pullup: false
      pulldown: false
    drive_strength: 20.0
  name: Button
  disabled_by_default: true
  entity_category: diagnostic
  id: echo_button
  on_press:
  - then:
    - voice_assistant.start: {}
  on_release:
  - then:
    - voice_assistant.stop: {}
- platform: gpio
  pin:
    number: GPIO19
    inverted: true
    mode:
      input: true
      pullup: true
  name: ${friendly_name} Volume Up
  on_click:
    - media_player.volume_up:
- platform: gpio
  pin:
    number: GPIO32
    inverted: true
    mode:
      input: true
      pullup: true
  name: ${friendly_name} Volume Down
  on_click:
    - media_player.volume_down:

light:
- platform: fastled_clockless
  id: led
  name: ''
  disabled_by_default: true
  entity_category: config
  pin: 22
  default_transition_length: 0s
  chipset: SK6812
  num_leds: 1
  rgb_order: GRB
  restore_mode: ALWAYS_OFF
  gamma_correct: 2.8
  flash_transition_length: 0s

sensor:
 - platform: adc
   pin: GPIO33
   name: ${name} Battery
   icon: "mdi:battery-outline"
   update_interval: 15s
   accuracy_decimals: 3
   attenuation: 11db
   raw: true
   filters:
    - multiply: 0.00173913 # 2300 -> 4, for attenuation 11db, based on Olivier's code
    - exponential_moving_average:
        alpha: 0.2
        send_every: 2
    - delta: 0.002