Created
November 29, 2013 02:00
-
-
Save DanielO/7700589 to your computer and use it in GitHub Desktop.
GB-BXi3-4010
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2013 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 9.2-BETA1 #0 r253505: Sun Jul 21 13:40:46 UTC 2013 | |
root@andenes.gsoft.com.au:/usr/obj/usr/src/sys/GENERIC amd64 | |
gcc version 4.2.1 20070831 patched [FreeBSD] | |
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU) | |
Origin = "GenuineIntel" Id = 0x40651 Family = 0x6 Model = 0x45 Stepping = 1 | |
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> | |
AMD Features2=0x21<LAHF,ABM> | |
Standard Extended Features=0x27ab<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID> | |
TSC: P-state invariant, performance statistics | |
real memory = 4294967296 (4096 MB) | |
avail memory = 4014608384 (3828 MB) | |
Event timer "LAPIC" quality 600 | |
ACPI APIC Table: <ALASKA A M I> | |
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs | |
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads | |
cpu0 (BSP): APIC ID: 0 | |
cpu1 (AP): APIC ID: 1 | |
cpu2 (AP): APIC ID: 2 | |
cpu3 (AP): APIC ID: 3 | |
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320) | |
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20110527/tbfadt-556) | |
ioapic0 <Version 2.0> irqs 0-39 on motherboard | |
kbd1 at kbdmux0 | |
ctl: CAM Target Layer loaded | |
acpi0: <ALASKA A M I> on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Event timer "HPET" frequency 14318180 Hz quality 550 | |
Event timer "HPET1" frequency 14318180 Hz quality 440 | |
Event timer "HPET2" frequency 14318180 Hz quality 440 | |
Event timer "HPET3" frequency 14318180 Hz quality 440 | |
Event timer "HPET4" frequency 14318180 Hz quality 440 | |
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 | |
atrtc0: Warning: Couldn't map I/O. | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 | |
hdac0: <Intel (0x0a0c) HDA Controller> mem 0xf7e14000-0xf7e17fff irq 16 at device 3.0 on pci0 | |
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0 | |
xhci0: 32 byte context size. | |
usbus0 on xhci0 | |
pci0: <simple comms> at device 22.0 (no driver attached) | |
hdac1: <Intel (0x9c20) HDA Controller> mem 0xf7e10000-0xf7e13fff irq 22 at device 27.0 on pci0 | |
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 | |
pci1: <ACPI PCI bus> on pcib1 | |
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 | |
pci2: <ACPI PCI bus> on pcib2 | |
pci2: <network> at device 0.0 (no driver attached) | |
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 | |
pci3: <ACPI PCI bus> on pcib3 | |
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci3 | |
re0: Using 1 MSI-X message | |
re0: ASPM disabled | |
re0: Chip rev. 0x4c000000 | |
re0: MAC rev. 0x00000000 | |
re0: Unknown H/W revision: 0x4c000000 | |
device_attach: re0 attach returned 6 | |
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7e1b000-0xf7e1b3ff irq 23 at device 29.0 on pci0 | |
usbus1: EHCI version 1.0 | |
usbus1 on ehci0 | |
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
isa0: <ISA bus> on isab0 | |
ahci0: <AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1a000-0xf7e1a7ff irq 19 at device 31.2 on pci0 | |
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
pci0: <serial bus, SMBus> at device 31.3 (no driver attached) | |
acpi_button0: <Power Button> on acpi0 | |
[ur 12:29] ~ >cat info.txt | |
Copyright (c) 1992-2013 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 9.2-BETA1 #0 r253505: Sun Jul 21 13:40:46 UTC 2013 | |
root@andenes.gsoft.com.au:/usr/obj/usr/src/sys/GENERIC amd64 | |
gcc version 4.2.1 20070831 patched [FreeBSD] | |
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU) | |
Origin = "GenuineIntel" Id = 0x40651 Family = 0x6 Model = 0x45 Stepping = 1 | |
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> | |
AMD Features2=0x21<LAHF,ABM> | |
Standard Extended Features=0x27ab<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID> | |
TSC: P-state invariant, performance statistics | |
real memory = 4294967296 (4096 MB) | |
avail memory = 4014608384 (3828 MB) | |
Event timer "LAPIC" quality 600 | |
ACPI APIC Table: <ALASKA A M I> | |
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs | |
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads | |
cpu0 (BSP): APIC ID: 0 | |
cpu1 (AP): APIC ID: 1 | |
cpu2 (AP): APIC ID: 2 | |
cpu3 (AP): APIC ID: 3 | |
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320) | |
ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20110527/tbfadt-556) | |
ioapic0 <Version 2.0> irqs 0-39 on motherboard | |
kbd1 at kbdmux0 | |
ctl: CAM Target Layer loaded | |
acpi0: <ALASKA A M I> on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Event timer "HPET" frequency 14318180 Hz quality 550 | |
Event timer "HPET1" frequency 14318180 Hz quality 440 | |
Event timer "HPET2" frequency 14318180 Hz quality 440 | |
Event timer "HPET3" frequency 14318180 Hz quality 440 | |
Event timer "HPET4" frequency 14318180 Hz quality 440 | |
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 | |
atrtc0: Warning: Couldn't map I/O. | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 | |
hdac0: <Intel (0x0a0c) HDA Controller> mem 0xf7e14000-0xf7e17fff irq 16 at device 3.0 on pci0 | |
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0 | |
xhci0: 32 byte context size. | |
usbus0 on xhci0 | |
pci0: <simple comms> at device 22.0 (no driver attached) | |
hdac1: <Intel (0x9c20) HDA Controller> mem 0xf7e10000-0xf7e13fff irq 22 at device 27.0 on pci0 | |
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 | |
pci1: <ACPI PCI bus> on pcib1 | |
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 | |
pci2: <ACPI PCI bus> on pcib2 | |
pci2: <network> at device 0.0 (no driver attached) | |
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 | |
pci3: <ACPI PCI bus> on pcib3 | |
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci3 | |
re0: Using 1 MSI-X message | |
re0: ASPM disabled | |
re0: Chip rev. 0x4c000000 | |
re0: MAC rev. 0x00000000 | |
re0: Unknown H/W revision: 0x4c000000 | |
device_attach: re0 attach returned 6 | |
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7e1b000-0xf7e1b3ff irq 23 at device 29.0 on pci0 | |
usbus1: EHCI version 1.0 | |
usbus1 on ehci0 | |
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
isa0: <ISA bus> on isab0 | |
ahci0: <AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1a000-0xf7e1a7ff irq 19 at device 31.2 on pci0 | |
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
pci0: <serial bus, SMBus> at device 31.3 (no driver attached) | |
acpi_button0: <Power Button> on acpi0 | |
acpi_tz0: <Thermal Zone> on acpi0 | |
acpi_tz1: <Thermal Zone> on acpi0 | |
sc0: <System console> at flags 0x100 on isa0 | |
sc0: VGA <16 virtual consoles, flags=0x300> | |
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | |
ppc0: cannot reserve I/O port range | |
est0: <Enhanced SpeedStep Frequency Control> on cpu0 | |
p4tcc0: <CPU Frequency Thermal Control> on cpu0 | |
est1: <Enhanced SpeedStep Frequency Control> on cpu1 | |
p4tcc1: <CPU Frequency Thermal Control> on cpu1 | |
est2: <Enhanced SpeedStep Frequency Control> on cpu2 | |
p4tcc2: <CPU Frequency Thermal Control> on cpu2 | |
est3: <Enhanced SpeedStep Frequency Control> on cpu3 | |
p4tcc3: <CPU Frequency Thermal Control> on cpu3 | |
Timecounters tick every 1.000 msec | |
hdacc0: <Intel (0x2807) HDA CODEC> at cad 0 on hdac0 | |
hdaa0: <Intel (0x2807) Audio Function Group> at nid 1 on hdacc0 | |
pcm0: <Intel (0x2807) (HDMI/DP 8ch)> at nid 3 on hdaa0 | |
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1 | |
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1 | |
pcm1: <Realtek ALC269 (Right Analog Headphones)> at nid 21 on hdaa1 | |
pcm2: <Realtek ALC269 (Right Digital)> at nid 30 on hdaa1 | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
usbus1: 480Mbps High Speed USB v2.0 | |
ugen0.1: <0x8086> at usbus0 | |
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
ugen1.1: <Intel> at usbus1 | |
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 | |
ada0: <INTEL SSDMCEAC120B3 LLLi> ATA-9 SATA 3.x device | |
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) | |
ada0: Command Queueing enabled | |
ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) | |
ada0: Previously was known as ad4 | |
SMP: AP CPU #1 Launched! | |
SMP: AP CPU #2 Launched! | |
SMP: AP CPU #3 Launched! | |
Timecounter "TSC" frequency 1696107928 Hz quality 1000 | |
Root mount waiting for: usbus1 usbus0 | |
uhub0: 13 ports with 13 removable, self powered | |
uhub1: 2 ports with 2 removable, self powered | |
Root mount waiting for: usbus1 | |
ugen1.2: <vendor 0x8087> at usbus1 | |
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 | |
uhub2: 8 ports with 8 removable, self powered | |
Root mount waiting for: usbus1 | |
Root mount waiting for: usbus1 | |
ugen1.3: <Verbatim> at usbus1 | |
umass0: <Verbatim STORE N GO, class 0/0, rev 2.10/1.10, addr 3> on usbus1 | |
umass0: SCSI over Bulk-Only; quirks = 0x0100 | |
umass0:2:0:-1: Attached to scbus2 | |
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 | |
da0: <Verbatim STORE N GO PMAP> Removable Direct Access SCSI-6 device | |
da0: 40.000MB/s transfers | |
da0: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C) | |
da0: quirks=0x2<NO_6_BYTE> | |
ugen1.4: <Microsoft> at usbus1 | |
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 2.00/3.00, addr 4> on usbus1 | |
kbd0 at ukbd0 | |
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 2.00/3.00, addr 4> on usbus1 | |
Root mount waiting for: usbus1 | |
ugen1.5: <Realtek> at usbus1 | |
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... | |
ubt0: <Bluetooth Radio> on usbus1 | |
WARNING: attempt to domain_add(bluetooth) after domainfinalize() | |
WARNING: attempt to domain_add(netgraph) after domainfinalize() | |
LINES="24" | |
bootfile="kernel" | |
comconsole_pcidev="" | |
comconsole_port="1016" | |
comconsole_speed="9600" | |
console="vidconsole" | |
currdev="disk0s4a:" | |
hint.acpi.0.oem="ALASKA" | |
hint.acpi.0.revision="2" | |
hint.acpi.0.rsdp="984208" | |
hint.acpi.0.rsdt="0xdb9b1028" | |
hint.acpi.0.xsdt="0x00000000db9b1088" | |
hint.acpi.0.xsdt_length="36" | |
hint.atkbd.0.at="atkbdc" | |
hint.atkbd.0.irq="1" | |
hint.atkbdc.0.at="isa" | |
hint.atkbdc.0.port="0x060" | |
hint.atrtc.0.at="isa" | |
hint.atrtc.0.irq="8" | |
hint.atrtc.0.port="0x70" | |
hint.attimer.0.at="isa" | |
hint.attimer.0.irq="0" | |
hint.attimer.0.port="0x40" | |
hint.fd.0.at="fdc0" | |
hint.fd.0.drive="0" | |
hint.fd.1.at="fdc0" | |
hint.fd.1.drive="1" | |
hint.fdc.0.at="isa" | |
hint.fdc.0.drq="2" | |
hint.fdc.0.irq="6" | |
hint.fdc.0.port="0x3F0" | |
hint.ppc.0.at="isa" | |
hint.ppc.0.irq="7" | |
hint.psm.0.at="atkbdc" | |
hint.psm.0.irq="12" | |
hint.sc.0.at="isa" | |
hint.sc.0.flags="0x100" | |
hint.uart.0.at="isa" | |
hint.uart.0.flags="0x10" | |
hint.uart.0.irq="4" | |
hint.uart.0.port="0x3F8" | |
hint.uart.1.at="isa" | |
hint.uart.1.irq="3" | |
hint.uart.1.port="0x2F8" | |
hint.wbwd.0.at="isa" | |
interpret="OK" | |
kernel="kernel" | |
kernel_options="" | |
kernelname="/boot/kernel/kernel" | |
loaddev="disk0s4a:" | |
loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" | |
mac_ifoff="NO" | |
module_path="/boot/kernel;/boot/modules" | |
smbios.bios.reldate="08/29/2013" | |
smbios.bios.vendor="American Megatrends Inc." | |
smbios.bios.version="F2" | |
smbios.chassis.maker="To Be Filled By O.E.M." | |
smbios.chassis.serial="To Be Filled By O.E.M." | |
smbios.chassis.tag="To Be Filled By O.E.M." | |
smbios.chassis.version="To Be Filled By O.E.M." | |
smbios.memory.enabled="4194304" | |
smbios.planar.maker="GIGABYTE" | |
smbios.planar.product="MMLP3AP-00" | |
smbios.planar.serial="To be filled by O.E.M." | |
smbios.planar.version="1.x" | |
smbios.socket.enabled="1" | |
smbios.socket.populated="1" | |
smbios.system.maker="GIGABYTE" | |
smbios.system.product="MMLP3AP-00" | |
smbios.system.serial="To be filled by O.E.M." | |
smbios.system.uuid="03000200-0400-0500-0006-000700080009" | |
smbios.system.version="1.x" | |
smbios.version="2.7" | |
vfs.root.mountfrom="ufs:/dev/ufs/FreeBSD_Install" | |
vfs.root.mountfrom.options="ro,noatime" | |
kern.devalias.ada0="ad4" | |
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 | |
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> | |
inet6 ::1 prefixlen 128 | |
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 | |
inet 127.0.0.1 netmask 0xff000000 | |
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> | |
hostb0@pci0:0:0:0: class=0x060000 card=0x50001458 chip=0x0a048086 rev=0x09 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = bridge | |
subclass = HOST-PCI | |
vgapci0@pci0:0:2:0: class=0x030000 card=0xd0001458 chip=0x0a168086 rev=0x09 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = display | |
subclass = VGA | |
hdac0@pci0:0:3:0: class=0x040300 card=0x50001458 chip=0x0a0c8086 rev=0x09 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = multimedia | |
subclass = HDA | |
xhci0@pci0:0:20:0: class=0x0c0330 card=0x50041458 chip=0x9c318086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = serial bus | |
subclass = USB | |
none0@pci0:0:22:0: class=0x078000 card=0x50011458 chip=0x9c3a8086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = simple comms | |
hdac1@pci0:0:27:0: class=0x040300 card=0xfa501458 chip=0x9c208086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = multimedia | |
subclass = HDA | |
pcib1@pci0:0:28:0: class=0x060400 card=0x50011458 chip=0x9c108086 rev=0xe4 hdr=0x01 | |
vendor = 'Intel Corporation' | |
class = bridge | |
subclass = PCI-PCI | |
pcib2@pci0:0:28:2: class=0x060400 card=0x50011458 chip=0x9c148086 rev=0xe4 hdr=0x01 | |
vendor = 'Intel Corporation' | |
class = bridge | |
subclass = PCI-PCI | |
pcib3@pci0:0:28:3: class=0x060400 card=0x50011458 chip=0x9c168086 rev=0xe4 hdr=0x01 | |
vendor = 'Intel Corporation' | |
class = bridge | |
subclass = PCI-PCI | |
ehci0@pci0:0:29:0: class=0x0c0320 card=0x50041458 chip=0x9c268086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = serial bus | |
subclass = USB | |
isab0@pci0:0:31:0: class=0x060100 card=0x50011458 chip=0x9c438086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = bridge | |
subclass = PCI-ISA | |
ahci0@pci0:0:31:2: class=0x010601 card=0xb0021458 chip=0x9c038086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = mass storage | |
subclass = SATA | |
none1@pci0:0:31:3: class=0x0c0500 card=0x50011458 chip=0x9c228086 rev=0x04 hdr=0x00 | |
vendor = 'Intel Corporation' | |
class = serial bus | |
subclass = SMBus | |
none2@pci0:2:0:0: class=0x028000 card=0x21141a3b chip=0x872310ec rev=0x00 hdr=0x00 | |
vendor = 'Realtek Semiconductor Co., Ltd.' | |
class = network | |
none3@pci0:3:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x0c hdr=0x00 | |
vendor = 'Realtek Semiconductor Co., Ltd.' | |
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' | |
class = network | |
subclass = ethernet |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment