Motion and Illuminance level

motion-illuminance.yaml

blueprint:
  name: Motion-activated Light with illuminance
  description: Turn on a light when motion is detected and illuminance is below a set Lux level.
  domain: automation
  input:
    motion_entity:
      name: Motion Sensor
      selector:
        entity:
          domain: binary_sensor
          device_class: motion
    lux_entity:
      name: Illuminance Sensor
      selector:
        entity:
          domain: sensor
          device_class: illuminance
    lux_level:
      name: Illuminance level
      description: If lux is below this value and motion is detected, the light will turn on.
      default: 100
      selector:
        number:
          min: 0
          max: 1000
    light_target:
      name: Light
      selector:
        target:
          entity:
            domain: light
    no_motion_wait:
      name: Wait time
      description: Time to leave the light on after last motion is detected.
      default: 120
      selector:
        number:
          min: 0
          max: 3600
          unit_of_measurement: seconds

mode: restart
max_exceeded: silent

trigger:
  platform: state
  entity_id: !input motion_entity
  from: "off"
  to: "on"

condition:
  condition: numeric_state
  entity_id: !input lux_entity
  below: !input lux_level

action:
  - service: light.turn_on
    target: !input light_target
  - wait_for_trigger:
      platform: state
      entity_id: !input motion_entity
      from: "on"
      to: "off"
  - delay: !input no_motion_wait
  - service: light.turn_off
    target: !input light_target

Is it possible to make this function the same as the Hue app pairing? I.e. make the bulb dim for a short period before fulling turning off, and to have different behaviours based on the time of day? (Evening brightness and day brightness)

Found an unexpected behavior; if I'm moving about the room continuously while the luminance drops, it won't turn on until the motion detection sensor clears and then triggers again. in other words, needs to also trigger if lux drops below !input lux_level and motion_entity state is already on. I think this fixes it: https://gist.github.com/trackzero/8c6b4ec48549df03a5e2408e693a62ab