Created
December 5, 2017 23:13
-
-
Save Dead2/60037f2a75fa1253cbb13b8ba05e92ee to your computer and use it in GitHub Desktop.
Seagate Constellation ES firmware update failed
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# ./SeaChest_Firmware_252_1177_64 -i -d /dev/sg5 | |
========================================================================================== | |
SeaChest_Firmware - Seagate drive utilities | |
Copyright (c) 2014-2017 Seagate Technology LLC and/or its Affiliates, All Rights Reserved | |
SeaChest_Firmware Version: 2.5.2-1_17_7 X86_64 | |
Build Date: Nov 2 2017 | |
Today: Wed Dec 6 00:09:57 2017 | |
========================================================================================== | |
sg5 - ST32000444SS - 9WM0LFB90000S0183A8P - SCSI | |
Vendor ID: SEAGATE | |
Model Number: ST32000444SS | |
Serial Number: 9WM0LFB9 | |
Firmware Revision: 0006 | |
World Wide Name: 5000C50020CEF9D3 | |
Copyright: Copyright (c) 2010 Seagate All rights reserved ▒ | |
PCBA Serial Number: S0183A8P | |
Drive Capacity (TB/TiB): 2.00/1.82 | |
Temperature Data: | |
Current Temperature (C): 31 | |
Highest Temperature (C): Not Reported | |
Lowest Temperature (C): Not Reported | |
Power On Time: 2 years 78 days 11 hours 43 minutes | |
Power On Hours: 25547.72 | |
MaxLBA: 3907029167 | |
Native MaxLBA: Not Reported | |
Logical Sector Size (B): 512 | |
Physical Sector Size (B): 512 | |
Sector Alignment: 0 | |
Rotation Rate (RPM): 7200 | |
Form Factor (inch): 3.5 | |
Last DST information: | |
Time since last DST (hours): 3233.72 | |
DST Status/Result: 0x0 | |
DST Test run: 0x1 | |
Interface speed: | |
Port 0 (Current Port) | |
Max Speed (GB/s): 6.0 | |
Negotiated Speed (Gb/s): 3.0 | |
Port 1 | |
Max Speed (GB/s): 6.0 | |
Negotiated Speed (Gb/s): Not Reported | |
Annualized Workload Rate (TB/yr): 0.00 | |
Total Bytes Read (MB): 42.67 | |
Total Bytes Written (MB): 242.45 | |
Encryption Support: Not Supported | |
Cache Size (MiB): Not Reported | |
Read Look-Ahead: Enabled | |
Write Cache: Enabled | |
SMART Status: Unknown or Not Supported | |
ATA Security Information: Not Supported | |
Firmware Download Support: Full, Segmented | |
Specifications Supported: | |
SPC-3 | |
Features Supported: | |
Self Test | |
Automatic Write Reassignment [Enabled] | |
Automatic Read Reassignment [Enabled] | |
EPC | |
Informational Exceptions [Mode 4] | |
Translate Address | |
Format Unit | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# ./SeaChest_Firmware_252_1177_64 -v2 --downloadFW MU-SAS-0008.LOD -d /dev/sg5 | |
========================================================================================== | |
SeaChest_Firmware - Seagate drive utilities | |
Copyright (c) 2014-2017 Seagate Technology LLC and/or its Affiliates, All Rights Reserved | |
SeaChest_Firmware Version: 2.5.2-1_17_7 X86_64 | |
Build Date: Nov 2 2017 | |
Today: Wed Dec 6 00:09:24 2017 | |
========================================================================================== | |
Sending SCSI Inquiry | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 00h | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 80h | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 83h | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = B1h | |
Inquiry returning: SUCCESS | |
Sending SCSI Read Capacity 10 command | |
Read Capacity 10 returning: SUCCESS | |
Sending SCSI Read Capacity 16 command | |
Read Capacity 16 returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 89h | |
Inquiry returning: NOT SUPPORTED | |
Sending ATA Identify command | |
Identify returning: NOT SUPPORTED | |
Sending ATA Identify Packet Device | |
Identify Packet Device returning: NOT SUPPORTED | |
Sending ATA Check Power Mode | |
Check Power Mode returning: NOT SUPPORTED | |
Sending ATA Identify command | |
Identify returning: NOT SUPPORTED | |
Sending ATA Identify Packet Device | |
Identify Packet Device returning: NOT SUPPORTED | |
sg5 - ST32000444SS - 9WM0LFB90000S0183A8P - SCSI | |
Requesting SCSI Supported Op Codes | |
Supported Op Codes returning: NOT SUPPORTED | |
Requesting SCSI Supported Op Codes | |
Supported Op Codes returning: SUCCESS | |
Sending SCSI Read Buffer | |
Read Buffer returning: SUCCESS | |
Sending SCSI Inquiry, VPD = C3h | |
Inquiry returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
.Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
.Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
Write Buffer returning: UNKNOWN: 19 | |
Firmware Download failed |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# ./SeaChest_Firmware_252_1177_64 -v3 --downloadFW MU-SAS-0008.LOD -d /dev/sg5 | |
========================================================================================== | |
SeaChest_Firmware - Seagate drive utilities | |
Copyright (c) 2014-2017 Seagate Technology LLC and/or its Affiliates, All Rights Reserved | |
SeaChest_Firmware Version: 2.5.2-1_17_7 X86_64 | |
Build Date: Nov 2 2017 | |
Today: Wed Dec 6 00:07:57 2017 | |
========================================================================================== | |
Sending SCSI Inquiry | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 00 00 00 60 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 578.95 | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 00h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 00 00 60 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 325.20 | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 80h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 80 00 18 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 344.41 | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 83h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 83 00 60 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 355.61 | |
Inquiry returning: SUCCESS | |
Sending SCSI Inquiry, VPD = B1h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 B1 00 40 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 332.76 | |
Inquiry returning: SUCCESS | |
Sending SCSI Read Capacity 10 command | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 25 00 00 00 00 00 00 00 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 296.49 | |
Read Capacity 10 returning: SUCCESS | |
Sending SCSI Read Capacity 16 command | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 9E 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 306.20 | |
Read Capacity 16 returning: SUCCESS | |
Sending SCSI Inquiry, VPD = 89h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 89 02 3C 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 01 C9 | |
0x10 00 03 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 24h - 0h = Invalid Field In CDB | |
FRU: 1h = Vendor Specific | |
Command Time (us): 416.35 | |
Inquiry returning: NOT SUPPORTED | |
Sending ATA Identify command | |
Sending SAT ATA Pass-Through Command: | |
Protocol: PIO | |
Data Direction: Data In | |
Task File Registers: | |
[Feature] = 00h | |
[Count] = 01h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[DeviceHead] = 40h | |
[Command] = ECh | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 85 08 0E 00 00 00 01 00 00 00 00 00 00 40 EC 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 01 CF | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 20h - 0h = Invalid Command Operation Code | |
FRU: 1h = Vendor Specific | |
Return Task File Registers: | |
[Error] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[Device] = 00h | |
[Status] = 00h | |
Command Time (us): 381.32 | |
Identify returning: NOT SUPPORTED | |
Sending ATA Identify Packet Device | |
Sending SAT ATA Pass-Through Command: | |
Protocol: PIO | |
Data Direction: Data In | |
Task File Registers: | |
[Feature] = 00h | |
[Count] = 01h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[DeviceHead] = 40h | |
[Command] = A1h | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 85 08 0E 00 00 00 01 00 00 00 00 00 00 40 A1 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 01 CF | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 20h - 0h = Invalid Command Operation Code | |
FRU: 1h = Vendor Specific | |
Return Task File Registers: | |
[Error] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[Device] = 00h | |
[Status] = 00h | |
Command Time (us): 579.95 | |
Identify Packet Device returning: NOT SUPPORTED | |
Sending ATA Check Power Mode | |
Sending SAT ATA Pass-Through Command: | |
Protocol: NON-Data | |
Data Direction: No Data | |
Task File Registers: | |
[Feature] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[DeviceHead] = 00h | |
[Command] = E5h | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B | |
0x00 A1 06 20 00 00 00 00 00 00 E5 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 01 CF | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 20h - 0h = Invalid Command Operation Code | |
FRU: 1h = Vendor Specific | |
Return Task File Registers: | |
[Error] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[Device] = 00h | |
[Status] = 00h | |
Command Time (us): 398.66 | |
Check Power Mode returning: NOT SUPPORTED | |
Sending ATA Identify command | |
Sending SAT ATA Pass-Through Command: | |
Protocol: PIO | |
Data Direction: Data In | |
Task File Registers: | |
[Feature] = 00h | |
[Count] = 01h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[DeviceHead] = 40h | |
[Command] = ECh | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B | |
0x00 A1 08 0E 00 01 00 00 00 40 EC 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 01 CF | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 20h - 0h = Invalid Command Operation Code | |
FRU: 1h = Vendor Specific | |
Return Task File Registers: | |
[Error] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[Device] = 00h | |
[Status] = 00h | |
Command Time (us): 409.52 | |
Identify returning: NOT SUPPORTED | |
Sending ATA Identify Packet Device | |
Sending SAT ATA Pass-Through Command: | |
Protocol: PIO | |
Data Direction: Data In | |
Task File Registers: | |
[Feature] = 00h | |
[Count] = 01h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[DeviceHead] = 40h | |
[Command] = A1h | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B | |
0x00 A1 08 0E 00 01 00 00 00 40 A1 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 01 CF | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 20h - 0h = Invalid Command Operation Code | |
FRU: 1h = Vendor Specific | |
Return Task File Registers: | |
[Error] = 00h | |
[Count] = 00h | |
[LBA Lo] = 00h | |
[LBA Mid] = 00h | |
[LBA Hi] = 00h | |
[Device] = 00h | |
[Status] = 00h | |
Command Time (us): 411.43 | |
Identify Packet Device returning: NOT SUPPORTED | |
sg5 - ST32000444SS - 9WM0LFB90000S0183A8P - SCSI | |
Requesting SCSI Supported Op Codes | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B | |
0x00 A3 0C 02 3B 00 05 00 00 00 0E 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 01 CF | |
0x10 00 02 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 24h - 0h = Invalid Field In CDB | |
FRU: 1h = Vendor Specific | |
Command Time (us): 694.74 | |
Supported Op Codes returning: NOT SUPPORTED | |
Requesting SCSI Supported Op Codes | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 A B | |
0x00 A3 0C 01 3B 00 00 00 00 00 0E 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 276.74 | |
Supported Op Codes returning: SUCCESS | |
Sending SCSI Read Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3C 03 00 00 00 00 00 00 04 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 263.40 | |
Read Buffer returning: SUCCESS | |
Sending SCSI Inquiry, VPD = C3h | |
CDB: | |
0 1 2 3 4 5 | |
0x00 12 01 C3 00 FF 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 426.89 | |
Inquiry returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 00 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (ms): 344.65 | |
Write Buffer returning: SUCCESS | |
.Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 00 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 600.41 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 01 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 564.28 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 01 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 568.27 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 02 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 561.59 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 02 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 567.30 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 03 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 561.88 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 03 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 560.24 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 04 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 757.99 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 04 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 563.76 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 05 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 562.91 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 05 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 566.16 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 06 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 564.57 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 06 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 563.66 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 07 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 574.74 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 07 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 562.91 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 08 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 579.39 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 08 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 579.02 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 09 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 585.89 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 09 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 576.42 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0A 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 572.18 | |
Write Buffer returning: SUCCESS | |
.Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0A 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 571.55 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0B 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 582.98 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0B 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 586.69 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0C 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 575.83 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0C 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 578.30 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0D 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 572.09 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0D 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 573.55 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0E 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 851.83 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0E 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 560.54 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0F 00 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 | |
0x00 00 00 00 00 00 00 00 00 | |
Sense Key: 0h = No Error | |
ASC & ASCQ: 0h - 0h = No Additional Sense Information | |
FRU: 0h = No Additional Information | |
Command Time (us): 564.15 | |
Write Buffer returning: SUCCESS | |
Sending SCSI Write Buffer | |
CDB: | |
0 1 2 3 4 5 6 7 8 9 | |
0x00 3B 07 00 0F 80 00 00 80 00 00 | |
Sense Data Buffer: | |
0 1 2 3 4 5 6 7 8 9 A B C D E F | |
0x00 70 00 05 00 00 00 00 0A 00 00 00 00 26 99 06 00 | |
0x10 00 00 | |
Sense Key: 5h = Illegal Request | |
ASC & ASCQ: 26h - 99h = Vendor specific ascq code | |
FRU: 6h = Vendor Specific | |
Command Time (us): 979.20 | |
Write Buffer returning: UNKNOWN: 19 | |
Firmware Download failed |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
This may be difficult to solve.
Based on the error reported at the end of the log, it looks like the drive is rejecting the new firmware because it thinks it is incompatible. Drives from this time often have capacity specific versions, like a 500GB 0008 file has a different servo than a 1TB or 2TB 0008 (your ST32000444SS).
The SCSI code is 0008 in all cases but the combined servo code is changing based on the capacity (number of platters inside the drive). It may be very difficult to track down the correct firmware for this older drive. Also, if the drive was originally sold by an OEM then it might even have their specific FW and only the OEM has the updates to their own code.
from your log:
Sense Key: 5h = Illegal Request
ASC & ASCQ: 26h - 99h = Vendor specific ascq code
FRU: 6h = Vendor Specific
05 26 99 06
05 Illegal Request
26 Invalid parameter or field or other attribute
99 Invalid Field Parameter—Firmware Tag
06 FRU unknown to me, but might mean a mismatch between the servo on the drive and in the new code file
https://en.wikipedia.org/wiki/Key_Code_Qualifier
http://www.t10.org/lists/asc-num.htm
https://www.seagate.com/files/staticfiles/support/docs/manual/Interface%20manuals/100293068j.pdf
see 2.4.1.6Additional Sense and Additional Sense Qualifier codes