Delta Delta0001

## index.html
<!DOCTYPE html>
<html prefix="og: http://ogp.me/ns#">

<head>
  <!-- content-type, which overrides http equivalent header. Because of charset, this meta should be set at first. -->
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
  <!--  Overrides http equivalent header. This tells IE to use the most updated engine.  -->
  <meta http-equiv="X-UA-Compatible" content="IE=Edge">
  <!--  Tells crawlers how to crawl this page, and the role of this page. https://developer.mozilla.org/en-US/docs/Web/HTML/Element/meta -->
  <meta name="robots" content="index, follow">

## HowToOTGFast.md

      
              1 file
            
          
              86 forks
            
          
              169 comments
            
          
              628 stars
            
          
                gbaman
                / HowToOTGFast.md
            
            
              Last active
              May 14, 2024 10:26
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
              
          
    Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).

1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.

2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.

3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

  
## HowToOTG.md

      
              1 file
            
          
              86 forks
            
          
              102 comments
            
          
              660 stars
            
          
                gbaman
                / HowToOTG.md
            
            
              Last active
              May 16, 2024 20:10
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero
              
          
    Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.

Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!

It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.

It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

  
## AGPS.md

      
              2 files
            
          
              8 forks
            
          
              10 comments
            
          
              43 stars
            
          
                veproza
                / AGPS.md
            
            
              Last active
              July 23, 2023 04:36
            
              
                Getting u-blox MAX-7C GPS to work with Assisted A-GPS
              
          
    Getting u-blox MAX-7C GPS to work with Assisted A-GPS

So you got your u-blox GPS and wired it up only to look at it struggling to get a valid fix? Under less than ideal conditions, it can take a better part of half an hour. That's because unlike your smartphone GPS, it doesn't have the luxury of having downloaded all the auxiliary navigation data (almanacs and the lot) out-of-band, via fast mobile connection. Instead it relies on the satellite's signal itself, which is being transmitted to you at meager 50 bits per second (I'm not missing "kilo" there, it's three orders of magnitude slower than your 2G GPRS connection).
Luckily, the u-blox receivers are fitted with what the company calls "AssistNow" capability and it does exactly the same thing your iPhone does - feeds the GPS with pre-downloaded almanacs, speeding up the acquisition process to mere seconds.
In principle, the process looks easy enough - we just need to download the data, and then push them to the receiver. Sadly, the AssistNow documentat

  
## cracking.md

      
              1 file
            
          
              118 forks
            
          
              449 comments
            
          
              604 stars
            
          
                vertexclique
                / cracking.md
            
            
              Last active
              May 11, 2024 21:17
            
              
                Cracking guide for Sublime Text 3 Build 3059 / 3065 ( Mac / Win x86_64 / Windows x86 / Linux x64 / Linux x86 )
              
          
    MacOS

Build 3059

MD5: 59bab8f71f8c096cd3f72cd73851515d
Rename it to: Sublime Text
Make it executable with: chmod u+x Sublime\ Text
	<!DOCTYPE html>
	<html prefix="og: http://ogp.me/ns#">

	<head>
	<!-- content-type, which overrides http equivalent header. Because of charset, this meta should be set at first. -->
	<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
	<!-- Overrides http equivalent header. This tells IE to use the most updated engine. -->
	<meta http-equiv="X-UA-Compatible" content="IE=Edge">
	<!-- Tells crawlers how to crawl this page, and the role of this page. https://developer.mozilla.org/en-US/docs/Web/HTML/Element/meta -->
	<meta name="robots" content="index, follow">